2BBYG-K06NHyRead Gaze Mini

LP0002_3.8.2 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. .Increase the separation between the equipment and receiver. .Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .Consult the dealer or an experienced radio/TV technician for help. Cations to this device not explicitly approved by manufacturer could Caution: .Any changes or modivoid your authority to operate this equipment.RF Exposure Information The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.

Hyweb Technology Co., Ltd 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-9 To whom it may concern: We, Hyweb Technology Co., Ltd , hereby certify that the equipment for which authorization is sought (FCC ID: 2BBYG-K06N) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature YaLan Zhan Director Hyweb Technology Co., Ltd 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

HywebTechnologyCo., Ltd Theinformationprovidedin thisletteris basedon thereferencedrulepartsof Title47 of theCFRas wellas KDB986446D01. Anexpirationdateforthisletterdoesnotexist.In casetheU.S.agentchanges,thegranteeis obligatedto notifytheFCCwithin30 daysvia thegrantingTCB. FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 7/6/23 U.S. AgentDesignation HywebTechnologyCo., Ltd acknowledgestheir consentfor the followingcontactlocatedin the United Statesto act as their agent for serviceof processfor the equipmentfor whichauthorizationis sought (FCC ID: 2BBYG-K06N): Nameand companyof U.S. agent:Tim Payne,FCC US Agent,LLC PhysicalU.S. addressof agent:3722 IllinoisAvenue,Saint Charles,IL, 60174,USA FRN of U.S. agent:0033402884 Email addressof U.S. agent:[email protected] FCC US Agent,LLCacknowledgestheir obligationto acceptserviceof processon behalfof Hyweb TechnologyCo., Ltd . HywebTechnologyCo., Ltd with the FRN 0033975327acceptsits obligationto maintainan agent for serviceof processin the UnitedStatesfor no less than one year after eitherthe granteehas permanentlyterminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirements listed under § 2.911(d)(7). Sincerely, Signature YaLanZhan Director HywebTechnologyCo., Ltd Signature Tim Payne Manager FCC US Agent,LLC 48_[model] US_Agent_2.911(d)(7)-U, V04

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-7-9> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BBYG-K06N K06N For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： YaLan Zhan/Director Company: Hyweb Technology Co., Ltd Address: 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) China Phone: +886 223956966 Fax: +886 223957229 E-Mail: [email protected]

Hyweb Technology Co., Ltd 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-9 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BBYG-K06N including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： YaLan Zhan/Director Company: Hyweb Technology Co., Ltd Address: 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) China Phone: +886 223956966 Fax: +886 223957229 E-Mail: [email protected]

Hyweb Technology Co., Ltd 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) China UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: 2BBYG-K06N (1) DFS Device: Master Client with Radar detection capability N/A Client without radar detection capability, (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 5180-5240 Yes No Yes No Yes No Yes No 5190-5230 Yes No Yes No Yes No Yes No 5210-5210 Yes No Yes No Yes No Yes No 5260-5320 Yes No Yes No Yes No Yes No 5270-5310 Yes No Yes No Yes No Yes No 5290-5290 Yes No Yes No Yes No Yes No 5500-5700 Yes No Yes No Yes No Yes No 5510-5690 Yes No Yes No Yes No Yes No 5530-5610 Yes No Yes No Yes No Yes No 5745-5825 Yes No Yes No Yes No Yes No 5755-5795 Yes No Yes No Yes No Yes No 5775-5775 Yes No Yes No Yes No Yes No (3) Country code selection ability Yes No If yes, pls explain how it was implemented: (4) Meet 15.202 requirement Yes No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title： YaLan Zhan/Director Company: Hyweb Technology Co., Ltd Address: 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) China Phone: +886 223956966 Fax: +886 223957229 E-Mail: [email protected]

Page 1 of 4 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. External Photos Photo 1 Photo 2 Page 2 of 4 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 ------End------

Label FCC ID: 2BBYG-K06N

Page 1 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Internal Photos Photo 1 Photo 2 Page 2 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Antenna Page 4 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 Page 5 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 Photo 10 Page 6 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 11 Photo 12 Page 7 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 13 Photo 14 Page 8 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 15 Photo 16 Page 9 of 9 FCC ID: 2BBYG-K06N Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 17 Photo 18 ------End------

RF Exposure evaluation FCC ID:2BBYG-K06N 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance BR - EDR Frequency (MHz) GFSK 2402 2440 2480 Target (dBm) 0 0 0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) π/4DQPSK 2402 2440 2480 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 8DPSK 2402 2440 2480 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 Page 2 of 3 BLE Frequency (MHz) GFSK 2402 2440 2480 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 2.4GWIFI Frequency (MHz) 11B 2412 2437 2462 Target (dBm) 2 2 2 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11G 2412 2437 2462 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11N20 2412 2437 2462 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11N40 2412 2437 2452 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 5GWIFI Frequency (MHz) 5180~5240MH 5180 5200 2480 Target (dBm) -2.0 -2.0 -2.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 5260~5320MH 5260 5280 5320 Target (dBm) -2.0 -2.0 -1.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 5500~5700MH 5500 5600 5700 Target (dBm) -2.0 -3.0 0.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 5745~5825MH 5745 5785 5825 Target (dBm) -1.0 -3.0 -4.0 Tolerance ± (dB) 1.0 1.0 1.0 Page 3 of 3 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) Max.RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BR-EDR 2.5 5 2.0 1.585 0.49449 <3 Yes BLE 2.5 5 2.0 1.585 0.49449 <3 Yes 2.4GHz WIFI 2.5 5 3.0 2.0 0.62 <3 Yes 5GHz WIFI 5.8 5 1.0 1.26 0.57 <3 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

Page 1 of 44 Report No.: AIT23060905FW4 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: Hyweb Technology Co., Ltd Applicant add.: 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302 , Taiwan (R.O.C.) Manufacturer: Shenzhen Haoqing Technology Co., LTD Manufacturer add.: Room 405, Zongtai Future City, No. 2007, Baoyuan Road, Xixiang, Bao’an District, Shenzhen Product Information: Product Name: HyRead Gaze Mini Model No.: K06N Brand Name: Gaze FCC ID: 2BBYG-K06N Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: June 09, 2023 Date of Test: June 09~June 27, 2023 Date of Issue: June 28, 2023 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 44 Report No.: AIT23060905FW4 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 6 2.1 Statement of the Measurement Uncertainty .............................................................................. 6 2.2 Measurement Uncertainty .......................................................................................................... 6 3 TEST FACILITY ............................................................................................................................................................. 7 3.1 Deviation from standard ............................................................................................................. 7 3.2 Abnormalities from standard conditions ..................................................................................... 7 3.3 Test Location .............................................................................................................................. 7 4 GENERAL INFORMATION ......................................................................................................................................... 8 4.1 Test frequencies ......................................................................................................................... 9 4.2 EUT Peripheral List .................................................................................................................... 9 4.3 Test Peripheral List ..................................................................................................................... 9 4.4 TEST METHODOLOGY ........................................................................................................... 10 4.5 Description of Test Modes ......................................................................................................... 11 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 13 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 14 6.1 Antenna requirement ................................................................................................................ 14 6.1.1 Standard requirement: ..................................................................................................... 14 6.1.2 EUT Antenna: ................................................................................................................... 14 6.2 On Time and Duty Cycle .......................................................................................................... 15 6.2.1 Standard requirement: ..................................................................................................... 15 6.2.2 Measuring Instruments and Setting: ................................................................................ 15 6.2.3 Test Procedures ............................................................................................................... 15 6.2.4 Test Setup Layout ............................................................................................................ 15 6.2.5 EUT Operation during Test ............................................................................................... 15 6.2.6 Test result ......................................................................................................................... 15 6.3 Maximum Conducted Output Power Measurement ................................................................. 16 6.3.1 Standard requirement: ..................................................................................................... 16 6.3.2 Measuring Instruments: .................................................................................................... 16 6.3.3 Test Procedures: ...............................................................…

Text truncated - open the document above for the full version.

Page 1 of 38 Report No.: AIT23060905FW5 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: Hyweb Technology Co., Ltd Applicant add.: 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302 , Taiwan (R.O.C.) Manufacturer: Shenzhen Haoqing Technology Co., LTD Manufacturer add.: Room 405, Zongtai Future City, No. 2007, Baoyuan Road, Xixiang, Bao’an District, Shenzhen Product Information: Product Name: HyRead Gaze Mini Model No.: K06N Brand Name: Gaze FCC ID: 2BBYG-K06N Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: June 09, 2023 Date of Test: June 09~June 27, 2023 Date of Issue: June 28, 2023 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 38 Report No.: AIT23060905FW5 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 5 2.1 Statement of the Measurement Uncertainty ....................................................................................... 5 2.2 Measurement Uncertainty ................................................................................................................... 5 3 TEST FACILITY ............................................................................................................................................................. 6 3.1 Deviation from standard ...................................................................................................................... 6 3.2 Abnormalities from standard conditions .............................................................................................. 6 3.3 Test Location ....................................................................................................................................... 6 4 GENERAL INFORMATION ......................................................................................................................................... 7 4.1 Test frequencies .................................................................................................................................. 8 4.2 EUT Peripheral List ............................................................................................................................. 8 4.3 Test Peripheral List .............................................................................................................................. 8 4.4 TEST METHODOLOGY ...................................................................................................................... 9 4.5 Description of Test Modes ................................................................................................................. 10 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 11 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 12 6.1 Antenna requirement ......................................................................................................................... 12 6.1.1 Standard requirement: .............................................................................................................. 12 6.1.2 EUT Antenna: ............................................................................................................................ 12 6.2 On Time and Duty Cycle ................................................................................................................... 13 6.2.1 Standard requirement: .............................................................................................................. 13 6.2.2 Measuring Instruments and Setting: ......................................................................................... 13 6.2.3 Test Procedures ........................................................................................................................ 13 6.2.4 Test Setup Layout ..................................................................................................................... 13 6.2.5 EUT Operation during Test ........................................................................................................ 13 6.2.6 Test result .................................................................................................................................. 13 6.3 Maximum Conducted Output Power Measurement .......................................................................... 14 6.3.1 Standard requirement: .............................................................................................................. 14 6.3.2 Measuring Instr…

Text truncated - open the document above for the full version.

Page 1 of 24 Report No.: AIT23060905FW6 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: Hyweb Technology Co., Ltd. Applicant add.: 5F.-6, No. 8, Taiyuan 1st St., Zhubei City, Hsinchu County 302 , Taiwan (R.O.C.) Manufacturer: Shenzhen Haoqing Technology Co., LTD Manufacturer add.: Room 405, Zongtai Future City, No. 2007, Baoyuan Road, Xixiang, Bao’an District, Shenzhen Product Information: Product Name: HyRead Gaze Mini Model No.: K06N Brand Name: Gaze FCC ID: 2BBYG-K06N Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: June 09, 2023 Date of Test: June 09~June 27, 2023 Date of Issue: June 28, 2023 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited an…

Text truncated - open the document above for the full version.