2BC2X-A3wireless charging car phone holder

FCC warning statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesr and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired peration. FCC Radiation Exposure Statement This equipment must be installed and operated in accordance with providedinstructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure

Shenzhen Yiqizhao Technology Co.,Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Yiqizhao Technology Co.,Ltd Address: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Product Name: wireless charging car phone holder FCC ID: 2BC2X-A3 Model(s): A3 2.911(d)(5)(i) Equipment Type We, Shenzhen Yiqizhao Technology Co.,Ltd (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Date: 2023-09-15 Name: Peter cheng Title: Manager E-mail [email protected] Company: Shenzhen Yiqizhao Technology Co.,Ltd NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https:// apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https:// www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Yiqizhao Technology Co.,Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List) Company name: Shenzhen Yiqizhao Technology Co.,Ltd Address: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Product Name: wireless charging car phone holder FCC ID: 2BC2X-A3 Model(s): A3 2.911(d)(5)(ii) Applicant filing We, Shenzhen Yiqizhao Technology Co.,Ltd (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature: Date: 2023-09-15 Name: Peter cheng Title: Manager E-mail [email protected] Company: Shenzhen Yiqizhao Technology Co.,Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https:// apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https:// www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Yiqizhao Technology Co.,Ltd Section 2.911(d)(7) USAAgent for Service of Process Company name: Shenzhen Yiqizhao Technology Co.,Ltd Address: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Product Name: wireless charging car phone holder FCC ID: 2BC2X-A3 Model(s): A3 2.911(d)(7) USA Designated Agent for Service of Process We, Shenzhen Yiqizhao Technology Co.,Ltd designate SELLER HELPER INC. for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: SELLER HELPER INC. Company name: Shenzhen Yiqizhao Technology Co.,Ltd Address: 1312 17th Street # 1298, Denver, CO 80202, United States Address: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China FRN Number: 0033406737 FCC Grantee Code: 2BC2X Contact Name: Fairy Lee Contact Name: Peter cheng Telephone No: 01303-7319873 Telephone No: +86-18098166269 Email: [email protected] Email: [email protected] 2.911(d)(7)USA Agent v1 Signature:

Shenzhen Yiqizhao Technology Co.,Ltd Agent Authorization Company name: Shenzhen Yiqizhao Technology Co.,Ltd Address: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Product Name: wireless charging car phone holder FCC ID: 2BC2X-A3 Model(s): A3 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-09-15 Name: Peter cheng Title: Manager E-mail [email protected] Company: Shenzhen Yiqizhao Technology Co.,Ltd

Shenzhen Yiqizhao Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-0 9-1 5 Subject; Request for Long Term Confidentiality FCC ID: 2BC2X-A3 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Date: 2023-09-15 Name: Peter cheng Title: Manager E-mail [email protected] Company: Shenzhen Yiqizhao Technology Co.,Ltd

Appendix II external photos ------End------

Lable: FCC ID: 2BC2X-A3 Label location

Appendix III internal photos Antenna Location ----END---

Report No.: ET-23060610E02 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd TEST REPORT Applicant: Shenzhen Yiqizhao Technology Co.,Ltd Address of Applicant: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Manufacturer/Factory: Shenzhen Yiqizhao Technology Co.,Ltd Address of Manufacturer/Factory: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Product Name: wireless charging car phone holder Model No.: A3 Trade Mark: N/A FCC ID: 2BC2X-A3 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Date of Test: August.11, 2023- August.15, 2023 Date of report issued: August.15 , 2023 Test Result : PASS Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 12 - Report No.: ET-23080906E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-23080906E02 Original August.15, 2023 - Page 3 of 12 - Report No.: ET-23080906E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ..................................................................................................................................... 4 2 GENERAL INFORMATION ...................................................................................................................... 5 2.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 2.2 TEST MODE ........................................................................................................................................ 6 2.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 2.4 DEVIATION FROM STANDARDS ............................................................................................................. 6 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 6 2.6 TEST FACILITY .................................................................................................................................... 6 2.7 TEST LOCATION .................................................................................................................................. 6 2.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 6 3 TEST INSTRUMENTS LIST ..................................................................................................................... 7 4 MAXIMUM PERMISSIBLE EXPOSURE .................................................................................................. 8 4.1 LIMIT .................................................................................................................................................. 8 4.2 REQUIREMENTS .................................................................................................................................. 8 4.3 MEASURE PROCEDURES ..................................................................................................................... 9 4.4 MEASURE SETUP ................................................................................................................................ 9 4.5 MEASUREMENT DATA .......................................................................................................................... 9 5 TEST SETUP PHOTO ............................................................................................................................ 10 - Page 4 of 12 - Report No.: ET-23080906E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1 Test Summary Test Item Section in CFR 47 Result Test by RF EXPOSURE KDB 680106 D01 RF Exposure Wireless Charging App v03r01 Pass Yvan Measurement Uncertainty Test Item Measurement Uncertainty Notes H-Field ±2.39dB (1) E-Field ±2.45dB (1) conducted RF Power ±0.65dB (1) temperature ±0.2°C (1) humidity ±1% (1) DC and low frequency voltages 0.06% Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. - Page 5 of 12 - Report No.: ET-23080906E02 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 2 General Information 2.1 General Description of EUT Product Name: wireless charging car phone holder Model No.: A3 Model of difference: N/A Test model: A3 Sample(s) Status: Engineer sample Hardware Version: V1.0 Software Version: V1.0 Operation Frequency: 115~205KHz Modulation type: ASK Antenna Type: Induction coil Antenna Po…

Text truncated - open the document above for the full version.

Specification 规格内容 Coil specifications CISTOMEP/N: 客户品名 Shenzhen Yiqizhao Technology Co.,Ltd PARTNUMBER： 制造商料号 001 1. DIMENSIONS(外形尺寸）：mm ITEM Spec. L 6.3UH ±5% Q值 70MAX D.C.R 0.06Ω Max A 45±1mm B 40±1mm C 13.5±0.5mm D 16±2mm E 3±2mm APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日 期 PACE 页 码 Peter Chen 2023.02.08 1 of 3 Specificati on 规格内容 Coil specifications CISTOMEP/N: 客户品名 Shenzhen Yiqizhao Technology Co.,Ltd PARTNUMBER： 制造商料号 001 2. WINDING DETAILS(绕线详细说明）： Wdy.NO. 绕 组 Start 开始 Finish 结束 Turns 圈数 WireDia 线径 Wdg.TyepeSprad /lose 绕线方法疏/密 绕 Wdg.Direction 绕线方向 Turns/Lay er 层数/每 层圈数 1 S F 10TS 0.08*10 5P Single layer tightly wound 1 /10TS 3. ELECTRICAL CHARACTERISTICS(电气特性）： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v uh 6.5±10% Q @100KHz/1v / 75Min DCR @100KHz/1v mΩ 55Max APPROVED BY 承 认 CHECKED BY 审 查 PREPARE D BY 制 作 DATE 日 期 PACE 页 码 Peter Chen 2023.02.08 2 of 3 Specification 规格内容 Coil specifications CISTOMEP/N: 客户品名 Shenzhen Yiqizhao Technology Co.,Ltd PARTNUMBER： 制造商料号 001 1. MATERIAL LIST材 料 清 单 NO. Material name 材料名称 Description 品名描述 Manufacturer 制造商 Material 材质 1 Silk-covered wire 0.08*105P 2 solder High temperature 3 Magnetic sheet 50*5*1 4 glue Resin adhesive 5 High temperature tape 8mm APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日 期 PACE 页 码 Peter Chen 2023.02.08 3 of 3

Report No.: ET-23080906E01 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd TEST REPORT Applicant: Shenzhen Yiqizhao Technology Co.,Ltd Address of Applicant: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Manufacturer/Factory: Shenzhen Yiqizhao Technology Co.,Ltd Address of Manufacturer/Factory: 201, Floor 2, Building 6, Yunli Intelligent Park, No. 3, Changfa Middle Road, Yangmei Community, Bantian Street, Shenzhen, Guangdong, China Product Name: wireless charging car phone holder Model No.: A3 Trade Mark: N/A FCC ID: 2BC2X-A3 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Date of Test: August.11, 2023- August.15, 2023 Date of report issued: August.15 , 2023 Test Result : PASS Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 19 - Report No.: ET-23080906E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-23080906E01 Original Jul.28, 2023 - Page 3 of 19 - Report No.: ET-23080906E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ..................................................................................................................................... 4 2 GENERAL INFORMATION ...................................................................................................................... 5 2.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 2.2 TEST MODE ........................................................................................................................................ 6 2.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 2.4 DEVIATION FROM STANDARDS ............................................................................................................. 6 2.5 TEST FACILITY .................................................................................................................................... 6 2.6 TEST LOCATION .................................................................................................................................. 6 2.7 ADDITIONAL INSTRUCTIONS ................................................................................................................. 6 3 TEST INSTRUMENTS LIST ..................................................................................................................... 7 4 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 8 4.1 ANTENNA REQUIREMENT ..................................................................................................................... 8 4.2 CONDUCTED EMISSIONS ..................................................................................................................... 9 4.3 RADIATED EMISSION MEASUREMENT .................................................................................................. 12 4.4 20DB BANDWIDTH ............................................................................................................................ 18 5 TEST SETUP PHOTO ............................................................................................................................ 19 6 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 19 - Page 4 of 19 - Report No.: ET-23080906E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1 Test Summary Test Item Section in CFR 47 Result Test by Antenna requirement 15.203 Pass / AC Power Line Conducted Emission 15.207 Pass Qiao Li Radiated Emission 15.209 Pass Qiao Li 20dB Occupied Bandwidth 2.1049&15.215 Pass Yvan Fan Remarks: 1. Pass: The EUT complies with the essential requirements in the standard. 2. Test according to ANSI C63.10:2013 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 9KHz-30MHz ±3.98 dB (1) Radiated Emission 30MHz-1000MHz ±4.30 dB Radiated Emission 1GHz-18GHz ±4.35 dB (1) Radiated Emission 18GHz-40GHz ±4.59 dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz ± 3.02 dB (1) Occupied Channel Bandwidth / ±0.55% (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. - Page 5 of 19 - Report No.: ET-23080906E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 2 General Information 2.1 General Description of EUT Product Name: wireless charging car phone holder Model No.: A3 Model of difference: N/A Test mo…

Text truncated - open the document above for the full version.

Appendix I Test Setup Photo 1.1. Photos of Radiated emission 1.2. Photos of Conducted Emission test ------End------