2BC36-BHM-ZX-M01Massager

Wenzhou Morning Electronics Co., Ltd 2023.10.08 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Massager MODEL: BHM-ZX-M01, BHM-ZX-M01-MS, TENS-01-MS, BHM-01-MH, BHM-M01-MS, BHM-ZX-MS, HL100-MA-GP-MO, BHM-ZX-MO1-MGEU FCC ID: 2BC36-BHM-ZX-M01 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title: Eric tang / Quality Manager Contact information / address: NO.238, Wei 11 Road, Yueqing Economic Development Zone, Wenzhou, Zhejiang, China

Wenzhou Morning Electronics Co., Ltd 2023.10.08 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title: Eric tang / Quality Manager Contact information / address: NO.238, Wei 11 Road, Yueqing Economic Development Zone, Wenzhou, Zhejiang, China

Wenzhou Morning Electronics Co., Ltd Model Difference 2023/10/08 EUT NAME: Massager MODEL: BHM-ZX-M01, BHM-ZX-M01-MS, TENS-01-MS, BHM-01-MH, BHM-M01-MS, BHM-ZX-MS, HL100-MA-GP-MO, BHM-ZX-MO1-MGEU FCC ID: 2BC36-BHM-ZX-M01 All the model are the same circuit and RF module, except model names and appearance of the color. Regards Sincerely Client’s signature: Client’s name / title: Eric tang / Quality Manager Contact information / address: NO.238, Wei 11 Road, Yueqing Economic Development Zone, Wenzhou, Zhejiang, China

External Photos

10*5mm Label Location FCC ID: 2BC36-BHM-ZX-M01

Internal Photos Antenna

FCC ID: 2BC36-BHM-ZX-M01 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion GFSK 1Mbps 2.480 0.36 1.09 0±1 1.00 1.26 <5 0.39651 3.00 YES GFSK 2Mbps 2.480 0.36 1.09 0±1 1.00 1.26 <5 0.39651 3.00 YES Conclusion: For the max result : 0.39651＜3, the SAR testing is not required.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd ., FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 12 REPORT No.：SZ23090363E01 TEST REPORT APPLICANT : SHENZHEN WYC TECHNOLOGY CO., LTD. PRODUCT NAME : 2.4 GHz PCB Antenna MODEL NAME : WAT-2400Y TRADE NAME : MOOYEE BRAND NAME : MOOYEE STANDARD(S) : IEEE Std 149-2021 RECEIPT DATE : 2023-09-25 TEST DATE : 2023-09-26 ISSUE DATE : 2023-09-27 Edited by: Fang Jinshan(Rapporteur) Approved by: Chi Shide(Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 12 REPORT No.：SZ23090363E01 DIRECTORY 1. Technical Information ...................................................................................................... 3 1.1. Applicant and Manufacturer Information ................................................................... 3 1.2. Equipment Under Test (EUT) Description .................................................................. 3 2. Test Results ....................................................................................................................... 4 2.1. Applied Reference Documents .................................................................................... 4 2.2. Test Conditions .............................................................................................................. 4 2.3. Measurement Uncertainty ............................................................................................ 4 2.4. Test Results lists ........................................................................................................... 5 Annex A Test Setup Photos ................................................................................................. 6 Annex B Figures ................................................................................................................... 7 1. 2D Radiation Pattern ........................................................................................................ 7 2. 3D Radiation Pattern ........................................................................................................ 8 Annex C EUT Photos .......................................................................................................... 10 Annex D General Information ............................................................................................ 12 1.1 Identification of the Responsible Testing Laboratory ............................................. 12 1.2 Identification of the Responsible Testing Location ................................................. 12 1.3 Test Equipments Utilized ............................................................................................. 12 Change History Version Date Reason for change 1.0 2023-09-27 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 12 REPORT No.：SZ23090363E01 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: SHENZHEN WYC TECHNOLOGY CO., LTD. Applicant Address: 518, A2 Bld, Peihong Mansion, Kehui 1st Road, Hi-tech Park, Nanshan District, Shenzhen, China. Manufacturer: SHENZHEN WYC TECHNOLOGY CO., LTD. Manufacturer Address: 518, A2 Bld, Peihong Mansion, Kehui 1st Road, Hi-tech Park, Nanshan District, Shenzhen, China. 1.2. Equipment Under Test (EUT) Description Wireless Type N/A Frequency 2400MHz-2500MHz Product HW Version N/A Product SW Version N/A IMEI N/A Sample No. 1# MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 12 REPORT No.：SZ23090363E01 2. Test Results 2.1. Applied Reference Documents Leading reference documents for testing: No. Identity Document Title 1 IEEE Std 149-2021 IEEE Recommended Practice for Antenna Measurements 2.2. Test Conditions Test Environment Conditions： Relative Humidity: 25 ... 75 % Temperature: +10 °C to +30 °C 2.3. Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. When the test result is a critical value,we will use the measurement uncertainty give the judgment result based on the 95% Confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 12 REPORT No.：SZ23090363E01 2.4. Test Results lists 2.4.1. Gain Frequency(MHz) Gain(dBi) 2400 1.86 2410 1.79 2420 1.81 2430 1.69 2440 1.70 2450 1.59 2460 1.45 2470 1.22 2480 0.94 2490 0.92 2500 1.12 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, Bao…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page: 1 of 53 Edition：B.0 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2309132849E Applicant: Wenzhou Morning Electronics Co., Ltd Product Name: Massager Model/Type reference: BHM-ZX-M01 Tested Date: 2023-09-08 to 2023-09-19 Issued Date: 2023-09-20 Report No.: BCTC2309132849E No.：BCTC/RF-EMC-005 Page: 2 of 53 Edition：B.0 FCC ID: 2BC36-BHM-ZX-M01 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Massager Trademark: N/A Model/Type reference: BHM-ZX-M01 BHM-ZX-M01-MS, TENS-01-MS, BHM-01-MH, BHM-M01-MS, BHM-ZX-MS, HL100-MA-GP-MO, BHM-ZX-MO1-MGEU Prepared For: Wenzhou Morning Electronics Co., Ltd Address: NO.238, Wei 11 Road, Yueqing Economic Development Zone, Wenzhou, Zhejiang, China Manufacturer: Zonnsmart Science & Technology CO.,Ltd Address: Room 501, NO.28,Hongyuan Road, Pingdong Community, Pingdi Street, Longgang District, Shenzhen Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-09-07 Sample tested Date: 2023-09-08 to 2023-09-19 Issue Date: 2023-09-20 Report No.: BCTC2309132849E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Tested by: Approved by: Eric Yang/Project Handler Zero Zhou/Reviewer Report No.: BCTC2309132849E No.：BCTC/RF-EMC-005 Page: 3 of 53 Edition：B.0 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 8 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ............................................................................................................. 9 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test Procedure ................................................................................................... 13 6.4 EUT Operating Conditions .................................................................................. 13 6.5 Test Result .......................................................................................................... 14 7. Radiated Emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test Procedure ................................................................................................... 18 7.4 EUT Operating Conditions .................................................................................. 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 23 8.1 Block Diagram Of Test Setup .............................................................................. 23 8.2 Limit .................................................................................................................... 23 8.3 Test Procedure ................................................................................................... 24 8.4 EUT operating Conditions ................................................................................... 24 8.5 Test Result .......................................................................................................... 25 9. Power Spectral Density Test ............................................................................... 26 9.1 Block Diagram Of Test Setup .............................................................................. 26 9.2 Limit .................................................................................................................... 26 9.3 Test Procedure ................................................................................................... 26 9.4 EUT Operating Conditions .................................................................................. 26 9.5 Test Result ..............…

Text truncated - open the document above for the full version.

Conducted Emissions Photo Radiated Measurement Photos