2BC3TSOM605EDGE_SOM

SOM605 User Manual Rev. 1.01, 2023/06/08  2015 InSignal Co., Ltd. All rights reserved. Important Notice InSignal Co. Ltd. (“InSignal”) reserves the right to make changes to the information in this publication at any time without prior notice. All information provided is for reference purpose only. InSignal assumes no responsibility for possible errors or omissions, or for any consequences resulting from the use of the information contained herein. This publication on its own does not convey any license, either express or implied, relating to any InSignal and/or third-party products, under the intellectual property rights of InSignal and/or any third parties. InSignal makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does InSignal assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation any consequential or incidental damages. Customers are responsible for their own products and applications. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by the customer's technical experts. InSignal products are not designed, intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of the InSignal product could reasonably be expected to create a situation where personal injury or death may occur. Customers acknowledge and agree that they are solely responsible to meet all other legal and regulatory requirements regarding their applications using InSignal products notwithstanding any information provided in this publication. Customer shall indemnify and hold InSignal and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly or indirectly, any claim (including but not limited to personal injury or death) that may be associated with such unintended, unauthorized and/or illegal use. WARNING No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of InSignal. This publication is intended for use by designated recipients only. This publication contains confidential information (including trade secrets) of InSignal protected by Competition Law, Trade Secrets Protection Act and other related laws, and therefore may not be, in part or in whole, directly or indirectly publicized, distributed, photocopied or used (including in a posting on the Internet where unspecified access is possible) by any unauthorized third party. InSignal reserves its right to take any and all measures both in equity and law available to it and claim full damages against any party that misappropriates InSignal’s trade secrets and/or confidential information. Copyright  2020 InSignal Co., Ltd. InSignal Co., Ltd. #1104, Byucksan Digital Valley 7st., 50 Digital-ro 33gil Guro-gu, Seoul 08377, Rep. of KOREA Home Page: http://www.insignal.co.kr Trademarks All brand names and trademarks are properties of their rightful owners. ARM, Jazelle, TrustZone and Thumb are registered trademarks of ARM Limited. Cortex, ETM, ETB, Coresight, ISA and Neon are trademarks of ARM Limited. Java is trademark of Sun Microsystems, Inc. SD is registered trademark of Toshiba Corporation. MMC and eMMC are trademarks of MultiMediaCard Association. JTAG is registered trademark of JTAG Technologies, Inc. Synopsys is registered trademark of Synopsys, Inc. I2S is trademark of Phillips Electronics. I²C is trademark of Phillips Semiconductor Corp. MIPI and Slimbus are registered trademarks of Mobile Industry Processor Interface (MIPI) Alliance. Other trademarks mentioned in this documents belong to their rightful owners. Introduction 3 1Introduction 1.1 Purpose This document is datasheet specification and user guide to InSSignal’s SOM605-4058-X System on Module. 1.2 Scope This document is limited to technical details of SOM605-4058 and does not include the detailed descriptions of the internal parts. 1.3 Applicable Documents SOM605 4058 EVK User Manual SOM605 4058 DVK datasheet SOM605 DVK datasheet T.B.D T.B.D 1.4 Reference Documents SOM605 DVK carrier Board Schematics ORCAD DSN file, PDF file SOM605 DVK carrier Board Layout PADS Layout PCB file SOM605 DVK carrier Board DXF files SOM605 DVK carrier Board BOM General Specifications 4 2General Specifications 2.1 SOM605 Specification Mai n components of SOM605 are as below. QCS605 Main Processor Memory : eMMC 5.1 and LPDDR4x eMCP package PMIC : PM670 + PM670L SMB1355 Parallel charger WCN3990 Atheros Wi-Fi + BT +FM combo chip over SLIMbus, Analog IQ, UART Embedded AK4678 Audio Codec IC is optional The functions of the above components are summarized in the Table 2-1 SOM605 Specification below. Table 2-1 SOM605 Specification SOM605 4058 Processors Qualcomm® QCS605 Octacore 64 bit Kryo 300 CPU Customized, 64-bit ARM v-8 2x 2.5GHz Kyro Gold cores, 6x 1.8GHz Kyro Silver cores Qualcomm® Hexagon™ DSP with dual Qualcomm® Hexagon™ Vector eXtensions (HVX), 1.2 GHz Qualcomm® Adreno™ 615 GPU with 64-bit addressing; 780 MHz Memory/Storage 1866GHz LPDDR4x 4GB / eMMC V5.x 64GB for SoM605 4058 Wireless Qualcomm® Wi-Fi 802.11a/b/g/n/ac 2.4/5Ghz 2X2 MIMO (WCN3990) with u.FL antenna connector Bluetooth 5.x + BLE Video Multi-format codec up to 5.7K30/4K60 video encode. Multi-stream codec (5.7K30/4K60, 1080p) Graphics Adreno 615, 3D graphics accelerator with 64-bit addressing, 780 MHz (max freq.) OpenGL ES 3.2, Vulkan, DX 12.x OpenCL 2.x, Microsoft DirectCompute, RenderScript Audio 24bits Stereo CODEC, AsahiKASEI AK4678 Power Management Qualcomm® Power and battery management (PM67…

Text truncated - open the document above for the full version.

Subject : Covered List Attestation Letter (Section 2.911 (d)(5)(i)(ii)) Date: 10/23/2023 FCC ID: 2BC3TSOM605 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA MOTOV. CO.,LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.911 (d)(5)(i)(ii) And, we certifies that one of following, ☒ 1. We are not identified on the Covered List and are not an affiliate or subsidiary of an entity identified on the Covered List. ☐ 2. We are identified on the Covered List as an entity producing “covered” equipment. But, we can be authorized since the reason as explained below. ☐ 3. We are an affiliate or subsidiary of an entity identified on the Covered List. But, we can be authorized since the reason as explained below. *Only one of paragraphs 1, 2 or 3 should be checked, if checked on paragraphs 2 or 3, the reason why it does not include the “covered” equipment should be addressed. Sincerely yours, (Name) ChangHun Lee (Title) Manager (Company Name) MOTOV. CO.,LTD.

Date: FCC ID: 2BC3TSOM605is seeking FCC equipment authorization as Product Description:FRN: FCC Product ID: FCC Module ID: (Name) ChangHun Lee (Title) Manager (Email Address) [email protected] (Phone number) 82-10-3347-8113 (Address) The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The modular transmitter must tested in a stand-alone configuration. The modular transmitter must be labeled with its own FCC ID number. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instruction along with the module to explain any such requirements. Model Name(s): For Modular Approval, the module shall meet all the requirements listed below. Please check () if the module complies with the stated requirement. The modular transmitter must have its own shielding. B1F-B1023, Incheon Global Campus, 119, Songdomunhwa-ro, Yeongsu-gu, Incheon , Republic of Korea FCC Modular Approval Attestation ■ Single Modular Transmitter □ Single Limited Modular Transmitter October 23, 2023 EDGE_SOM SOM605 0023476120 N/A 2BC3TSOM605 The modular transmitter must comply with any applicable RF exposure requirements. If a module(s) does NOT meet one or more of the above listed requirements, the applicant may request Limited Modular Approval (LMA). For LMA, please state details about why the above requirement(s) could not be met; and state how control of the end product, into which the module will be installed, will be maintained by the applicant / manufacturer, such that full compliance of the end product is always ensured: Product Information Modular Checklist/Information The modular transmitter must have buffered modulation/data inputs. The modular transmitter must have its own power supply regulation.

V02072023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10/16/23 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID:2BC3TSOM605 MOTOV. CO.,LTD. certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. MOTOV. CO.,LTD. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance consulting, LLC dba iCertifi FCC FRN: 0033399411 Address: 1001 SW Disk Drive, Suite 250, Bend, Oregon 97702 Contact Person: Paul Preston Tel: 866-885-4575 Email: [email protected] Sincerely, MOTOV. CO.,LTD. FRN: 0034322768 Americas Compliance Consulting LLC dba iCertifi ChangHun Lee Paul Preston Signature

Date: To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern: Subject : FCC Agent Authorization Letter for FCC ID :2BC3TSOM605 This authorization is valid until further written notice from the applicant. Sincerely, Signed by: (Name) ChangHun Lee (Title) Manager [email protected] 82-10-3347-8113 (Address) October 23, 2023 B1F-B1023, Incheon Global Campus, 119, Songdomunhwa-ro, Yeongsu-gu, Incheon, Republic of Korea We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. _________________________ (Email Address) (Phone number)

Date: To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT: Request for Confidentiality for FCC ID:2BC3TSOM605 We hereby request confidential treatment of the information accompanying this application as outlined below: Exhibit 1 2 3 4 5 6 7 8 Sincerely, Signed by: (Name) ChangHun Lee (Title) Manager (Email Address) [email protected] (Phone number) 82-10-3347-8113 (Address) B1F-B1023, Incheon Global Campus, 119, Songdomunhwa-ro, Yeongsu-gu,Incheon,RepublicofKorea October 23, 2023 Description Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL (180 DAYS) User’s Manual Test-Setup Photos Internal Photos External Photos Schematics Parts List LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST

FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 4 EXTERNAL PHOTOGRAPHS FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 4 ■ EXTERNAL PHOTO(Module) FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 4 FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 4 ■ EXTERNAL PHOTO(Jig Board) Module

2BC3TSOM605 MODEL: SOM605

FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 5 INTERNAL PHOTOGRAPHS FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 5 ■ INTERNAL PHOTO(Module) FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 5 FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 5 ■ INTERNAL PHOTO(Ant) FCC ID: 2BC3TSOM605 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 5 ■ INTERNAL PHOTO(Jig Board) Module

TEST REPORT FCC BT LE Test for SOM605 Certification APPLICANT MOTOV. Co.,Ltd. REPORT NO. HCT-RF-2310-FC007 DATE OF ISSUE October 11, 2023 Tested by Woong Jin Kim Technical Manager Jong Seok Lee Accredited by KOLAS, Republic of KOREA F-TP22-03(Rev.04) HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 1 / 56 The report shall not be reproduced except in full(only partly) without approval of the laboratory. F-TP22-03 (Rev. 04) Page 2 of 56 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TEST REPORT FCC BT LE Test for SOM605 REPORT NO. HCT-RF-2310-FC007 DATE OF ISSUE October 11, 2023 Additional Model - ApplicantMOTOV. Co.,Ltd. B1F-B1023, Inchoen Global Campus, 119, Songdomunhwa-ro, Yeonsu-gu, Incheon, Republic of Korea Eut Type Model Name EDGE_SOM SOM605 FCC ID 2BC3TSOM605 Max. RF Output Power5.257 dBm (3.36 mW) Modulation typeGFSK FCC ClassificationDigital Transmission System(DTS) FCC Rule Part(s) Part 15.247 BrandMOTOV. Co.,Ltd. The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. This laboratory is not accredited for the test results marked * Report No. HCT-RF-2310-FC007 F-TP22-03 (Rev. 04) Page 3 of 56 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 October 11, 2023 Initial Release Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. KOLAS Statement: The above Test Report is the accredited test result by (KS Q) ISO/IEC 17025 and KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (KOLAS Accreditation No. KT197) If this report is required to confirmation of authenticity, please contact to www.hct.co.kr Report No. HCT-RF-2310-FC007 F-TP22-03 (Rev. 04) Page 4 of 56 CONTENTS 1. EUT DESCRIPTION 5 2. TEST METHODOLOGY 6 EUT CONFIGURATION 6 EUT EXERCISE 6 GENERAL TEST PROCEDURES 6 DESCRIPTION OF TEST MODES 7 3. INSTRUMENT CALIBRATION 7 4. FACILITIES AND ACCREDITATIONS 7 FACILITIES 7 EQUIPMENT 7 5. ANTENNA REQUIREMENTS 8 6. MEASUREMENT UNCERTAINTY 8 7. DESCRIPTION OF TESTS 9 8. SUMMARY TEST OF RESULTS 24 9. TEST RESULT 25 9.1 DUTY CYCLE 25 9.2 6 dB BANDWIDTH 28 9.3 OUTPUT POWER 33 9.4 POWER SPECTRAL DENSITY 35 9.5 BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS 38 9.6 RADIATED SPURIOUS EMISSIONS 43 9.7 RADIATED RESTRICTED BAND EDGES 49 9.8 POWERLINE CONDUCTED EMISSIONS 52 10. LIST OF TEST EQUIPMENT 54 11. ANNEX A_ TEST SETUP PHOTO 56 Report No. HCT-RF-2310-FC007 F-TP22-03 (Rev. 04) Page 5 of 56 1. EUT DESCRIPTION Model SOM605 Additional Model - EUT Type EDGE_SOM Power Supply DC 5.0 V Frequency Range 2 402 MHz ˊ 2 480 MHz Max. RF Output Power Peak 1 M Bit/s: 2 M Bit/s: 5.014 dBm (3.17 mW) 5.257 dBm (3.36 mW) Average 1 M Bit/s: 2 M Bit/s: 4.93 dBm (3.11 mW) 4.92 dBm (3.10 mW) Modulation Type GFSK Bluetooth Version 5.0 Number of Channels 40 Channels Antenna Specification Pattern Antenna Peak Gain : 1.95 dBi Date(s) of Tests August 29, 2023 ~ October 10, 2023 EUT serial numbers Radiated : MOTO V-VRD-0 Conducted : MOTO V-VRD-1 Manufaucturer MOTOV. Co.,Ltd. B1F-B1023, Inchoen Global Campus, 119, Songdomunhwa-ro, Yeonsu-gu, Incheon, Republic of Korea Report No. HCT-RF-2310-FC007 F-TP22-03 (Rev. 04) Page 6 of 56 2. TEST METHODOLOGY FCC KDB 558074 D01 15.247 Meas Guidance v05r02 dated April 02, 2019 entitled ˑguidance for compliance measurements on digital transmission system, frequency hopping spread spectrum system, and hybrid system devices and the measurement procedure described in ANSI C63.10(Version : 2013) ˎthe American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devicesˏ. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 6.2 of ANSI C63.10. (Version :2013) Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane below 1 GHz. Above 1 GHz with 1.5 m using absorbers between the EUT and receive antenna. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3 m away from the receiving antenna, which varied from 1 m to 4 m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this hand-held transmitter (EUT) was rotated through three orthogonal axes according to the requirements in Section 6.6.5 of ANSI C63.10. (Version: 2013) Report No. HCT-RF-2310-FC007 F-TP22-03 (Rev. 04) Page 7 of 56 DESCRIPTION OF …

Text truncated - open the document above for the full version.

亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 承认书 客户名称： 名称：橡皮天线 规格型号：YH2.4-5.8G-SMA-109 送样日期：2016-3-18 客户承认CustomerApprove 制作 drawing 审核 check 批准 approved 高双玉王玉美蒋振华 审核 check 批准 approved 承认 approval 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 一：尺寸图 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 1.RevisionHistory RevisionDateChangeNotificationDescription 1.02016.03.17 初版 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 2.Specification SamplePhoto A.ElectricalCharacteristics Frequency2400~2500MHz 5150~5850MHz S.W.R.<=2.0@2400~2500MHz <=2.5@5150~5850MHz Thedataistestedwith1Mcable PeakGain2.0dBi@2400~2500MHz 3.0dBi@5150~5850MHz PolarizationLinear Impedance50Ohm B.Material&MechanicalCharacteristics MaterialofRadiatorCU MaterialofPlasticTPEE/ABS/POM CableTypeRG-178U-03 ConnectorTypeSMAMaleReverse C.Environmental OperationTemperature-40 ̊C~+65 ̊C StorageTemperature-40 ̊C~+80 ̊C AntennaColorStoragelife <2year 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 3.CharacteristicsandReliabilityTest TestItems測試項 目 TestConditionandProcedure測試方法Requirements要求 Result 結果 C1V.S.W.R. 電壓駐波比 SetDUTonNetworkAnalyzer;makeindividual calibrationtotest設置網路分析儀參數進行測試 DirectiveDUTspecification 符合待測物規範 PASS C2Insertion Loss插入損 失 SetDUTonNetworkAnalyzer;makeindividual calibrationtotest設置網路分析儀參數進行測試 DirectiveDUTspecification 符合待測物規範 N/A C3Antenna Gain 天線增益 SetDUTonAntennaChamber;makeindividual calibrationtotest設置天線暗室參數進行測試 DirectiveDUTspecification 符合待測物規範 PASS C4Voltage Breakdown 耐電壓 Testvoltageshouldbeappliedbetweeninsulated portions,orbetweengroundasspecified. 在绝缘部分测试电压,或指定接地面之间 MaxVoltage≥500Vor directivematerial specification最大電壓≥500V 或符合材料規範 N/A C5Insulation Resistance 絕緣阻抗 SetVoltage:500±50V;betweentheinsulated portions,orbetweengroundasspecified. 設置電壓500±50V,在绝缘部份測試或指定接地面之 间 Resistance≥500Mohm ordirectivematerial specification阻抗≥500Mohm 或符合材料規範 N/A C6Contact Resistance 接觸阻抗 AirTemp:26°C;measuredwithtestequipment 室溫26°C，指定量測設備 Directivematerial specification 符合材料規範 N/A M1Vibration 震動 GB/T2423.48-2008 Amplitude:0.03inch(1.5mm);Freq:20to80to20 Hz 3directions;2hoursforeachdirection 振幅1.5mm；頻率20~80~20Hz；3個方向各2H 1.NoVisualDamage 2.FrequencyTol.≤5% 無明顯外觀不良;頻率偏移≤5% PASS M2Random Drop 跌落 GB/T2423.8-1995 Single：Height:1.0Meter;3directions;1timefor eachdirection單支天線，高1m；3個方向各1次 1.Nopartsseparated、fracture 2.FrequencyTol.≤5% 產品無脫落、斷裂;頻率偏移≤5% PASS Packing：Height:0.76Meter;1corner,3edges,6 surface 包裝：高0.76m，一角、三棱、六面各一次 PASS Antenna+Machine:Height:0.76Meter;1corner,3 edges,6surface.整機：高0.76m，一角、三棱、六 面各一次 N/A 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 M3Solderability 可焊性 GB/T2423.28-2005 Temp:260±5°C;Duration:5seconds溫度260± 5°C;持續5秒 Tinevenlyonfull 上錫均勻飽滿 N/A M4PullTest 拉力 Holdingwithindividualspecification;force appliedtoaxisofterminal.單獨定義產品端子拉力 1.DirectiveDUTspecification 2.FrequencyTol.≤5% 符合待測物規範;頻率偏移≤5% PASS M5TorqueTest 扭力 Holdingwithindividualspecification;applied clockwiseandcounterclockwisetotheaxisof terminal 單獨定義產品端子之順時針及逆時針扭力 1.DirectiveDUTspecification 2.FrequencyTol.≤5% 符合待測物規範;頻率偏移≤5% PASS M6Dimension 尺寸 Inspectionofdimension,color,material,package, surfaceprocess.检查尺寸,颜色,材料,包装,表面處理 DirectiveDUTspecification 符合待測物規範 PASS E1Waterproof 防水 WithReferencetoIEC60529//IPCodeDefinition 參考IEC60529IP定義 DirectiveDUTspecification 符合待測物規範 N/A E2SaltSpray鹽 霧 GB/T2423.17-2008 Temp:35°C;RH:≥95%;NaClsolution:≥ 5%;Time:24H 溫度35°C；濕度≥95%;鹽水濃度≥5%；測試24H 1.NoVisualDamage 2.FrequencyTol.≤5% 無明顯外觀不良;頻率偏移≤5% PASS E3Temperature and Humidity Chamber 恒溫恒濕 GB/T2423.3-2006 Temp:80°C/12H;-40°C/12HRH:≥90%;Time: 24H 溫度80°C測試12H轉-40°C測試12H；濕度≥90%； 時間24H After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.≤5% 恢復2H后，無明顯外觀不良;頻 率偏移≤5% PASS E4Thermal Shock 冷熱衝擊 GB/T2423.22-2008 -40°C(30minutes)to+80°C(30minutes)； Cycles:24 -40°C測試30分轉80°C測試30分為一個週期； 共24週期 After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.≤5% 恢復2H后，無明顯外觀不良;頻 率偏移≤5% PASS E5Agingtest 老化 GB/T2423.2-2008 Temp:80°C;Time:24hours 溫度80°C，測試24H After2HoursRecovery 1.NoVisualDamage 2.FrequencyTol.≤5% 無明顯外觀不良;頻率偏移≤5% PASS E6HighTemp. 高溫 Temp.270±10°C；Times：120seconds 溫度270±10°C，測試時間120秒 NoVisualDamage 無明顯外觀不良 N/A R1RoHSWithReferencetoIEC62321:2008withflowchart 參考IEC62321測試流程 DirectiveRoHS2011/65/EU 符合RoHS2011/65/EU標準 PASS R2PFOSWithReferencetoUSAEPA3550C:1996byLC/MS 參考USAEPA3550C測試流程 DirectiveRoHS2006/122/EC 符合RoHS2011/65/EU標準 PASS 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 4.Antenna-SParameterTestData 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 5.Antenna-RadiationPatternTestData 2400MHz2450MHz2500MHz 亚冠通信 联系人：李慧芹手机：15012652181 传真：0755-61135883E-mail：[email protected] 深圳市亚冠天线连接器有限公司 地址：深圳市光明新区公明镇南庄牛路口2号邮编：518106 5150MHz5550MHz5850MHz