2BC3Y-M9Tablet pc

1 Content Content .............................................................................................................................................. 1 1 Introduction .................................................................................................................................... 3 1.1 Acknowledgement ............................................................................................................... 3 1.2 Announcements ................................................................................................................... 3 1.3 Safety Instruction ................................................................................................................ 3 1.4 Abbreviation/Terminology .................................................................................................. 5 2 MID Introduction ........................................................................................................................... 6 2.1 MID Operation and Preparation .......................................................................................... 6 2.2 MID Status and Reminder ............................................................................................. 6 3 Quick Start Guide ........................................................................................................................... 8 3.1 Keys Function ..................................................................................................................... 8 3.2 Startup and Shutdown ......................................................................................................... 8 3.3 Open and Close of the Screen ............................................................................................. 9 3.4 Usage of Touch Screen ........................................................................................................ 9 3.5 Home Page ........................................................................................................................ 10 3.6 Visit Application Procedures ............................................................................................. 12 3.7 USB Connection ............................................................................................................... 12 3.8 Typing words ..................................................................................................................... 13 3.9 Operation Technique ......................................................................................................... 15 4 Basic Setting ................................................................................................................................ 16 4.1 Wireless and Internet ......................................................................................................... 16 4.2 Bluetooth ........................................................................................................................... 18 4.3 Data Usage ........................................................................................................................ 20 4.4 More .................................................................................................................................. 20 4.14 Language and Input Method ....................................................................................... 34 4.16 Date and Time ................................................................................................................. 36 5 Multi-Media ................................................................................................................................. 40 5.1 Music ................................................................................................................................. 40 5.2 Photo Gallery .................................................................................................................... 41 5.3 Camera .............................................................................................................................. 42 5.4 FM Radio .......................................................................................................................... 42 6 Internet ......................................................................................................................................... 45 6.1 Browser ............................................................................................................................. 45 6.2 Email ................................................................................................................................. 46 7 Other Application Procedures ...................................................................................................... 49 7.1 Clock ................................................................................................................................. 49 7.2 Calculator .......................................................................................................................... 49 7.3 File Manager ..................................................................................................................... 50 7.4 Recorder ............................................................................................................................ 52 8 Installation of Procedures ............................................................................................................. 54 2 8.1 Installation ......................................................................................................................... 54 8.2 Uninstall ............................................................................................................................ 54 9 Troubles Shooting ........................................................................................................................ 55 3 1 Introduction 1.1 …

Text truncated - open the document above for the full version.

Shen zhen Qianyiji Technology Co.,LTD 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-9-21 To whom it may concern: We, Shen zhen Qianyiji Technology Co.,LTD , hereby certify that the equipment for which authorization is sought (FCC ID: 2BC3Y-M9) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Zhaodong Wu Employee Shen zhen Qianyiji Technology Co.,LTD 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Shen zhen Qianyiji Technology Co.,LTD 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023/09/21 U.S. Agent Designation Shen zhen Qianyiji Technology Co.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BC3Y-M9): Name and company of U.S. agent: GSS SERVICE INC Physical U.S. address of agent: 6547 N Academy Blvd #2266 Colorado Springs COLORADO 80918 United States FRN of U.S. agent: 0033402082 Email address of U.S. agent: [email protected] GSS SERVICE INC acknowledges their obligation to accept service of process on behalf of Shen zhen Qianyiji Technology Co.,LTD Shen zhen Qianyiji Technology Co.,LTD with the FRN [0034192179] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Zhaodong Wu Employee Shen zhen Qianyiji Technology Co.,LTD Signature Michoux Logan PM GSS SERVICE INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Shen zhen Qianyiji Technology Co.,LTD Add: 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Date: 2023-9-21 FCC ID: 2BC3Y-M9 Dear Sir/Madam, We, Shen zhen Qianyiji Technology Co.,LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Tablet pc Model no.: M9, S4, S5, M7, G10, G15, G16, G18, G19, K104, F104, S104, CP101, CP801, CP701, CP901, CP102, CP110, CP120, CP133, CP140, CP150, CP156 Sincerely, Name/Title： Zhaodong Wu/Employee Company: Shen zhen Qianyiji Technology Co.,LTD Address: 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Phone: 15811838820 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-9-21> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BC3Y-M9 M9 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Zhaodong Wu/Employee Company: Shen zhen Qianyiji Technology Co.,LTD Address: 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Phone: 15811838820 Fax: N/A E-Mail: [email protected]

Shen zhen Qianyiji Technology Co.,LTD 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-9-21 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BC3Y-M9 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Zhaodong Wu/Employee Company: Shen zhen Qianyiji Technology Co.,LTD Address: 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Phone: 15811838820 Fax: N/A E-Mail: [email protected]

Shen zhen Qianyiji Technology Co.,LTD 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Date: 2023-9-21 FCC ID: 2BC3Y-M9 Model Number: M9 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shen zhen Qianyiji Technology Co.,LTD , declare that this EUT (FCC ID: 2BC3Y-M9) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Zhaodong Wu/Employee Company: Shen zhen Qianyiji Technology Co.,LTD Address: 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen China Phone: 15811838820 Fax: N/A E-Mail: [email protected]

FCC ID: 2BC3Y-M9 External Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2BC3Y-M9 Photo 4 Photo 5 Photo 6

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID: 2BC3Y-M9

FCC ID: 2BC3Y-M9 Internal Photos of the EUT Photo 1 Photo 2 Photo 3 BLE+2.4G WIFI PIFA Antenna FCC ID: 2BC3Y-M9 Photo 4 Photo 5 Photo 6 FCC ID: 2BC3Y-M9 Photo 7 Photo 8

RF Exposure evaluation FCC ID: 2BC3Y-M9 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 1.0 1.0 1.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 2 of 2 802.11b (Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 7.0 7.0 7.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11g (Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 6.0 6.0 6.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11n(H20) (Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 6.0 6.0 6.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11n(H40) (Peak) Channel Channel 03 Channel 06 Channel 09 Target (dBm) 5.0 5.0 5.0 Tolerance ±(dB) 1.0 1.0 1.0 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BLE 2.450 5 2.0 1.5849 0.4962<3.0 Yes 2.4GWIFI 2.450 5 8.0 6.3096 1.9752<3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

1. Antenna Description: Antenna type PIFA antenna Model M9 Frequency range 2400-2500MHz Manufacturer Shen zhen Qianyiji Technology Co.,LTD ANT Peak Gain 1.50 dBi 2. Antenna Photo: Length :26.80mm Width:21.24mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ........................................... : CTA23090100201 2BC3Y-M9 Compiled by ( position+printed name+signature) .. : File administrators Zoey Cao Supervised by ( position+printed name+signature) .. : Project Engineer Amy Wen Approved by ( position+printed name+signature) .. : RF Manager Eric Wang Date of issue ..................................... : Sep. 15, 2023 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Shen zhen Qianyiji Technology Co.,LTD Address ............................................ : 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Test specification ...........................: Standard ........................................... : FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Tablet pc Trade Mark ....................................... : N/A Manufacturer .................................... : Shen zhen Qianyiji Technology Co.,LTD Model/Type reference....................... : M9 Listed Models .................................. : S4, S5, M7, G10, G15, G16, G18, G19, K104, F104, S104, CP101, CP801, CP701, CP901, CP102, CP110, CP120, CP133, CP140, CP150, CP156 Modulation ....................................... : GFSK Frequency .......................................... From 2402MHz to 2480MHz Ratings ............................................. : DC 3.7V From battery and DC 5.0V From external circuit Result................................................ : PASS Report No.: CTA23090100201 Page 2 of 35 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Tablet pc Model /Type : M9 Listed Models : S4, S5, M7, G10, G15, G16, G18, G19, K104, F104, S104, CP101, CP801, CP701, CP901, CP102, CP110, CP120, CP133, CP140, CP150, CP156 Applicant : Shen zhen Qianyiji Technology Co.,LTD Address : 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Manufacturer : Shen zhen Qianyiji Technology Co.,LTD Address : 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA23090100201 Page 3 of 35 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emissions and Band Edge 13 4.3 Maximum Peak Output Power 20 4.4 Power Spectral Density 21 4.5 6dB Bandwidth 23 4.6 Out-of-band Emissions 25 4.7 Antenna Requirement 29 5 T E S T S E T U P P H O T O S O F T H E E U T .......................................... 30 6 P H O T O S O F T H E E U T ............................................................. 31 Report No.: CTA23090100201 Page 4 of 35 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 V05r02: Guidance for Performing Compliance Measurements on Digital Transmission …

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ........................................... : CTA23090100202 2BC3Y-M9 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Amy Wen Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Sep. 15, 2023 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ........................................... : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ........................... : Shen zhen Qianyiji Technology Co.,LTD Address ............................................ : 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator ................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Tablet pc Trade Mark ....................................... : N/A Manufacturer .................................... : Shen zhen Qianyiji Technology Co.,LTD Model/Type reference ...................... : M9 Listed Models .................................. : S4, S5, M7, G10, G15, G16, G18, G19, K104, F104, S104, CP101, CP801, CP701, CP901, CP102, CP110, CP120, CP133, CP140, CP150, CP156 Modulation Type ............................... : CCK/DSSS/OFDM Operation Frequency ....................... : From 2412 - 2462MHz Rating ............................................... : DC 3.7V From battery and DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA23090100202 Page 2 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Tablet pc Model /Type : M9 Series Model No. S4, S5, M7, G10, G15, G16, G18, G19, K104, F104, S104, CP101, CP801, CP701, CP901, CP102, CP110, CP120, CP133, CP140, CP150, CP156 Applicant : Shen zhen Qianyiji Technology Co.,LTD Address : 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Manufacturer : Shen zhen Qianyiji Technology Co.,LTD Address : 4th Floor, Right Elevator, Building B, Demingfa Industrial Zone, Jiuwei 1st Road, Xixiang, Bao'an District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA23090100202 Page 3 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 6 2.4 Short description of the Equipment under Test (EUT) 6 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 Maximum Peak Conducted Output Power 19 4.4 Power Spectral Density 20 4.…

Text truncated - open the document above for the full version.