
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
- Shenzhen Ruiben Technology Co., LTD - The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 11/22/2023 U.S. Agent Designation [Shenzhen Ruiben Technology Co., LTD] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2BC4S-OX9RB130A]): Name and company of U.S. agent: Stone Trading Limited Physical U. S. address of agent: 6547 N Academy Blvd #2266,Colorado Springs,CO 80918,United States FRN of U.S. agent: 0033401936 Email address of U.S. agent: [email protected] [Stone Trading Limited] acknowledges their obligation to accept service of process on behalf of [Shenzhen Ruiben Technology Co., LTD]. [Shenzhen Ruiben Technology Co., LTD] with the FRN [0034332650] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanentl y terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm th e above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature [Name] Sky Yao [Title] Purchase Manager [Company] Shenzhen Ruiben Technology Co., LTD Signature [Name of U.S. agent] Dongmei Fang [Title of U.S. agent] Manager [Company of U.S. agent] Stone Trading Limited 48_[mo del] US_Agent_2.911(d)(7) - U, V04
Shenzhen Ruiben Technology Co., LTD The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 11/22/2023 To whom it may concern: We, [Shenzhen Ruiben Technology Co., LTD], hereby certify that the equipment for which authorization is sought (FCC ID: [2BC4S-OX9RB130A]) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the fi lin g of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist ) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature [Name] Sky Yao [Title] Purchase Manager [Company] Shenzhen Ruiben Technology Co., LTD 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02
Label Location On EUT Label Product Name: 2 in 1 Laptop Model Number: RB130A Trademark: OX9 FCC ID: 2BC4S-OX9RB130A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 1 of 7 Report No.: 8132EU011202W-AC ANNEX C INTERNAL PHOTOS PHOTO 1 PHOTO 2 Page 2 of 7 Report No.: 8132EU011202W-AC PHOTO 3 PHOTO 4 Page 3 of 7 Report No.: 8132EU011202W-AC PHOTO 5 PHOTO 6 Page 4 of 7 Report No.: 8132EU011202W-AC PHOTO 7 PHOTO 8 Page 5 of 7 Report No.: 8132EU011202W-AC PHOTO 9 PHOTO 10 Page 6 of 7 Report No.: 8132EU011202W-AC PHOTO 11 PHOTO 12 PIFA Antenna Page 7 of 7 Report No.: 8132EU011202W-AC PHOTO 13 PHOTO 14 --- End ---
TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 46 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:ShenzhenRuibenTechnologyCo.,LTD Address: 1502YingfeiTuoBuilding,GuanshengFifthRoad,Luhu Community,GuanhuStreet,LonghuaDistrict,Shenzhen EUTName:2in1Laptop BrandName:OX9 ModelNumber:RB130A IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF231012R00101 TestStandards: 47CFRPart2.1093IEEE1528-2013IEEEC95.1-2019 KDB447498D01KDB865664D01KDB865664D02 KDB248227D01KDB616217D04KDB690783D01 FCCID:2BC4S−OX9RB130A TestConclusion:Pass TestDate:2023-10-26 DateofIssue:2023-10-27 PreparedBy: MonicaZhou/ProjectEngineer Date:2023-10-27 ApprovedBy: Ryan.CJ/EMCManager Date:2023-10-27 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF231012R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 46 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-10-27Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF231012R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 46 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5EquipmentunderTestAncillaryEquipment....................................................................................................................5 2.6TechnicalInformation......................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................6 3.1TestStandards................................................................................................................................................................6 3.2DeviceCategoryandSARLimit......................................................................................................................................7 3.3TestResultSummary......................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition....................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................10 5.SystemVerification.................................................................................................................................................................14 5.1PurposeofSystemCheck.............................................................................................................................................14 5.2SystemCheckSetup.....................................................................................................................................................15 6.TESTPOSITIO…
Text truncated - open the document above for the full version.
TEST REPORT Report No.: 8132EU011202W2 Applicant: Shenzhen Ruiben Technology Co., LTD Address: 1502 Yingfei Tuo Building,Guansheng Fifth Road, Luhu Community,Guanhu Street,Longhua District,Shenzhen, Guangdong, China Product Name: 2 in 1 Laptop Model No.: RB130A Trademark: OX9 FCC ID: 2BC4S-OX9RB130A Test Standard(s): 47 CFR Part 15 Subpart C, Section 15.247 Date of Receipt: Sep. 12, 2023 Test Date: Sep. 12, 2023 – Oct. 19, 2023 Date of Issue: Nov. 20, 2023 I SSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED P repared by: Reviewed and Approved by: ______ ______________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 54 Report No.: 8132EU011202W2 TRF No.: FCC Part 15.247 (A01) Revision Record Report Version Issued Date Description Status V0 Nov. 20, 2023 Original Valid Page 3 of 54 Report No.: 8132EU011202W2 TRF No.: FCC Part 15.247 (A01) Table of Contents 1 COVER PAGE .................................................................................................................................. 1 2 GENERAL INFORMATION ...................................................................................................................... 5 2.1 APPLICANT INFORMATION .................................................................................................................. 5 2.2 MANUFACTURER INFORMATION .......................................................................................................... 5 2.3 FACTORY INFORMATION ..................................................................................................................... 5 2.4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 5 2.5 TECHNICAL INFORMATION OF E.U.T. .................................................................................................. 6 3 TEST SUMMARY ...................................................................................................................................... 7 3.1 TEST STANDARD ............................................................................................................................... 7 3.2 TEST VERDICT ................................................................................................................................... 7 3.3 TEST LABORATORY ........................................................................................................................... 7 4 TEST CONFIGURATION .......................................................................................................................... 8 4.1 TEST ENVIRONMENT .......................................................................................................................... 8 4.2 TEST EQUIPMENT .............................................................................................................................. 8 4.3 DESCRIPTION OF SUPPORT UNIT ........................................................................................................ 9 4.4 TEST MODE ...................................................................................................................................... 9 4.5 MEASUREMENT UNCERTAINTY ........................................................................................................... 9 4.6 DEVIATION FROM STANDARDS ........................................................................................................... 9 5 TEST ITEMS ........................................................................................................................................... 10 5.1 ANTENNA REQUIREMENT .................................................................................................................. 10 5.1.1 Test Requirement .............................................................................................................. 10 5.1.2 Antenna Anti-Replacement Construction .......................................................................... 10 5.1.3 Antenna Gain .................................................................................................................... 10 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 11 5.2.1 Test Requirement .............................................................................................................. 11 5.2.2 Test Setup Diagram .......................................................................................................... 11 5.2.3 Test Procedure .................................................................................................................. 11 5.2.4 Test Data ........................................................................................................................... 11 5.3 OCCUPIED BANDWIDTH ................................................................................................................... 14 5.3.1 Test Requirement .............................................................................................................. 14 5.3.2 Test Setup Diagram .......................................................................................................... 14 5.3.3 Test Procedure .................................................................................................................. 14 5.3.4 Test Data ........................................................................................................................... 14 5.4 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 15 5.4.1 Test Requirement .............................................................................................................. 15 5.4.2 Test Setup Diagram .......................................................................................................... 15 5.4.3 Test Procedure ...................…
Text truncated - open the document above for the full version.
TEST REPORT Report No.: 8132EU011202W3 Applicant: Shenzhen Ruiben Technology Co., LTD Address: 1502 Yingfei Tuo Building,Guansheng Fifth Road, Luhu Community,Guanhu Street,Longhua District,Shenzhen, Guangdong, China Product Name: 2 in 1 Laptop Model No.: RB130A Trademark: OX9 FCC ID: 2BC4S-OX9RB130A Test Standard(s): 47 CFR Part 15 Subpart C, Section 15.247 Date of Receipt: Sep. 12, 2023 Test Date: Sep. 12, 2023 – Oct. 19, 2023 Date of Issue: Nov. 20, 2023 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) Revision Record Report Version Issued Date Description Status V0 Nov. 20, 2023 Original Valid Page 3 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) Table of Contents 1 COVER PAGE .................................................................................................................................. 1 2 GENERAL INFORMATION ...................................................................................................................... 5 2.1 APPLICANT INFORMATION .................................................................................................................. 5 2.2 MANUFACTURER INFORMATION .......................................................................................................... 5 2.3 FACTORY INFORMATION ..................................................................................................................... 5 2.4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 5 2.5 TECHNICAL INFORMATION OF E.U.T. .................................................................................................. 6 3 TEST SUMMARY ...................................................................................................................................... 9 3.1 TEST STANDARD ............................................................................................................................... 9 3.2 TEST VERDICT ................................................................................................................................... 9 3.3 TEST LABORATORY ........................................................................................................................... 9 4 TEST CONFIGURATION ........................................................................................................................ 10 4.1 TEST ENVIRONMENT ........................................................................................................................ 10 4.2 TEST EQUIPMENT ............................................................................................................................ 10 4.3 DESCRIPTION OF SUPPORT UNIT ...................................................................................................... 11 4.4 TEST MODE .................................................................................................................................... 11 4.5 MEASUREMENT UNCERTAINTY ......................................................................................................... 11 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 11 4.7 ABNORMALITIES FROM STANDARD CONDITION ................................................................................. 11 5 TEST ITEMS ........................................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .................................................................................................................. 12 5.1.1 Test Requirement ........................................................................................................... 12 5.1.2 Antenna Anti-Replacement Construction ........................................................................ 12 5.1.3 Antenna Gain .................................................................................................................. 12 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 13 5.2.1 Test Requirement ........................................................................................................... 13 5.2.2 Test Setup Diagram ........................................................................................................ 13 5.2.3 Test Procedure ............................................................................................................... 13 5.2.4 Test Data......................................................................................................................... 13 5.3 OCCUPIED BANDWIDTH ................................................................................................................... 16 5.3.1 Test Requirement ........................................................................................................... 16 5.3.2 Test Setup Diagram ........................................................................................................ 16 5.3.3 Test Procedure ............................................................................................................... 16 5.3.4 Test Data......................................................................................................................... 16 5.4 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 17 5.4.1 Test Requirement ........................................................................................................... 17 5.4.2 Test Setup Diagram ...............................................................…
Text truncated - open the document above for the full version.
Page 135 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11n(HT40)_MCH_2437MHz_Ant2 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant2 (SISO)_NTNV Page 136 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_LCH_2412MHz_RU242_Left_Ant2 (SISO)_NTNV 802.11ax(HEW20)_MCH_2437MHz_RU242_Left_Ant2 (SISO)_NTNV Page 137 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_HCH_2462MHz_RU242_Left_Ant2 (SISO)_NTNV 802.11ax(HEW40)_LCH_2422MHz_RU484_Left_Ant2 (SISO)_NTNV Page 138 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW40)_MCH_2437MHz_RU484_Left_Ant2 (SISO)_NTNV 802.11ax(HEW40)_HCH_2452MHz_RU484_Left_Ant2 (SISO)_NTNV Page 139 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_LCH_2412MHz_Ant2 (SISO)_NTNV 802.11ac(VHT20)_MCH_2437MHz_Ant2 (SISO)_NTNV Page 140 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_HCH_2462MHz_Ant2 (SISO)_NTNV 802.11ac(VHT40)_LCH_2422MHz_Ant2 (SISO)_NTNV Page 141 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT40)_MCH_2437MHz_Ant2 (SISO)_NTNV 802.11ac(VHT40)_HCH_2452MHz_Ant2 (SISO)_NTNV Page 142 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 3. Maximum Conducted Output Power 3.1 Power 3.1.1 Test Result Mode TX Type Frequency (MHz) RU RU Pos Maximum Average Conducted Output Power (dBm) Verdict ANT1 Limit 802.11b SISO 2412 / / 14.28 <=30 Pass 2437 / / 13.82 <=30 Pass 2462 / / 14.24 <=30 Pass 802.11g SISO 2412 / / 15.04 <=30 Pass 2437 / / 14.40 <=30 Pass 2462 / / 14.94 <=30 Pass 802.11n (HT20) SISO 2412 / / 15.10 <=30 Pass 2437 / / 14.73 <=30 Pass 2462 / / 15.03 <=30 Pass 802.11n (HT40) SISO 2422 / / 14.91 <=30 Pass 2437 / / 14.91 <=30 Pass 2452 / / 15.32 <=30 Pass 802.11ax (HEW20) SISO 2412 RU242 Left 15.14 <=30 Pass 2437 RU242 Left 14.65 <=30 Pass 2462 RU242 Left 15.03 <=30 Pass 802.11ax (HEW40) SISO 2422 RU484 Left 14.98 <=30 Pass 2437 RU484 Left 15.10 <=30 Pass 2452 RU484 Left 15.46 <=30 Pass 802.11ac (VHT20) SISO 2412 / / 15.02 <=30 Pass 2437 / / 14.62 <=30 Pass 2462 / / 14.97 <=30 Pass 802.11ac (VHT40) SISO 2422 / / 14.94 <=30 Pass 2437 / / 14.97 <=30 Pass 2452 / / 15.35 <=30 Pass Page 143 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) ANT 2: Mode TX Type Frequency (MHz) RU RU Pos Maximum Average Conducted Output Power (dBm) Verdict ANT2 Limit 802.11b SISO 2412 / / 14.63 <=30 Pass 2437 / / 14.35 <=30 Pass 2462 / / 14.36 <=30 Pass 802.11g SISO 2412 / / 15.29 <=30 Pass 2437 / / 14.77 <=30 Pass 2462 / / 15.14 <=30 Pass 802.11n (HT20) SISO 2412 / / 15.19 <=30 Pass 2437 / / 14.75 <=30 Pass 2462 / / 15.13 <=30 Pass 802.11n (HT40) SISO 2422 / / 15.01 <=30 Pass 2437 / / 14.99 <=30 Pass 2452 / / 15.41 <=30 Pass 802.11ax (HEW20) SISO 2412 RU242 Left 15.16 <=30 Pass 2437 RU242 Left 14.73 <=30 Pass 2462 RU242 Left 15.01 <=30 Pass 802.11ax (HEW40) SISO 2422 RU484 Left 15.02 <=30 Pass 2437 RU484 Left 15.02 <=30 Pass 2452 RU484 Left 15.41 <=30 Pass 802.11ac (VHT20) SISO 2412 / / 15.05 <=30 Pass 2437 / / 14.31 <=30 Pass 2462 / / 14.96 <=30 Pass 802.11ac (VHT40) SISO 2422 / / 14.91 <=30 Pass 2437 / / 14.93 <=30 Pass 2452 / / 15.35 <=30 Pass Page 144 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) ANT 1+ANT 2: Mode TX Type Frequency (MHz) RU RU Pos Maximum Average Conducted Output Power (dBm) Verdict ANT1+ANT2 Limit 802.11b SISO 2412 / / 17.47 <=30 Pass 2437 / / 17.10 <=30 Pass 2462 / / 17.31 <=30 Pass 802.11g SISO 2412 / / 18.18 <=30 Pass 2437 / / 17.60 <=30 Pass 2462 / / 18.05 <=30 Pass 802.11n (HT20) SISO 2412 / / 18.16 <=30 Pass 2437 / / 17.75 <=30 Pass 2462 / / 18.09 <=30 Pass 802.11n (HT40) SISO 2422 / / 17.97 <=30 Pass 2437 / / 17.96 <=30 Pass 2452 / / 18.38 <=30 Pass 802.11ax (HEW20) SISO 2412 RU242 Left 18.16 <=30 Pass 2437 RU242 Left 17.70 <=30 Pass 2462 RU242 Left 18.03 <=30 Pass 802.11ax (HEW40) SISO 2422 RU484 Left 18.01 <=30 Pass 2437 RU484 Left 18.07 <=30 Pass 2452 RU484 Left 18.45 <=30 Pass 802.11ac (VHT20) SISO 2412 / / 18.05 <=30 Pass 2437 / / 17.48 <=30 Pass 2462 / / 17.98 <=30 Pass 802.11ac (VHT40) SISO 2422 / / 17.94 <=30 Pass 2437 / / 17.96 <=30 Pass 2452 / / 18.36 <=30 Pass Page 145 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 3.1.2 Test Graph 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 146 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 147 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 148 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 149 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Page 150 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Page 151 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_LCH_2412MHz_RU242_Left_Ant1 (SISO)_NTNV 802.11ax(HEW20)_MCH_2437MHz_RU242_Left_Ant1 (SISO)_NTNV Page 152 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_HCH_2462MHz_RU242_Left_Ant1 (SISO)_NTNV 802.11ax(HEW40)_LCH_2422MHz_RU484_Left_Ant1 (SISO)_NTNV Page 153 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW40)_MCH_2437MHz_RU484_Left_Ant1 (SISO)_NTNV 802.11ax(HEW40)_HCH_2452MHz_RU484_Left_Ant1 (SISO)_NTNV Page 154 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11ac(VHT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 155 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 80…
Text truncated - open the document above for the full version.
Page 233 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Page 234 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_LCH_2412MHz_RU242_Left_Ant1 (SISO)_NTNV 802.11ax(HEW20)_LCH_2412MHz_RU242_Left_Ant1 (SISO)_NTNV Page 235 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_MCH_2437MHz_RU242_Left_Ant1 (SISO)_NTNV 802.11ax(HEW20)_HCH_2462MHz_RU242_Left_Ant1 (SISO)_NTNV Page 236 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW20)_HCH_2462MHz_RU242_Left_Ant1 (SISO)_NTNV 802.11ax(HEW40)_LCH_2422MHz_RU484_Left_Ant1 (SISO)_NTNV Page 237 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW40)_LCH_2422MHz_RU484_Left_Ant1 (SISO)_NTNV 802.11ax(HEW40)_MCH_2437MHz_RU484_Left_Ant1 (SISO)_NTNV Page 238 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ax(HEW40)_HCH_2452MHz_RU484_Left_Ant1 (SISO)_NTNV 802.11ax(HEW40)_HCH_2452MHz_RU484_Left_Ant1 (SISO)_NTNV Page 239 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11ac(VHT20)_LCH_2412MHz_Ant1 (SISO)_NTNV Page 240 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11ac(VHT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Page 241 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11ac(VHT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Page 242 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT40)_LCH_2422MHz_Ant1 (SISO)_NTNV 802.11ac(VHT40)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 243 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11ac(VHT40)_HCH_2452MHz_Ant1 (SISO)_NTNV 802.11ac(VHT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Page 244 of 263 Report No.: 8132EU011202W3 TRF No.: FCC Part 15.247 (A01) 802.11b_LCH_2412MHz_ Ant2 (SISO)_NTNV 802.11b_LCH_2412MHz_Ant2 (SISO)_NTNV Page 245 of 263 Report No.: 8132E…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 2 | 15C | 2.41 GHz - 2.46 GHz | 70.00 mW |