2BC6D-T01Camera detector

➀ ➁ ➂➃➄ Instructions for use T�� �、Product description connection with high-ranking officials Strong signal indicator Signal Sensitivity Lamp Red/Blue Indicator Infrared detection key Signal Detection Key On/Off Button Sensitivity Rate Adjustment eyelet TYPE-C/�V Charging Indicator infrared light scan window �、Products �. Operating instructions Please read the manual before use, the correct use of this product.This product is a multifunctional productadopting active infrared scanning and passive wireless scanning combined way, can detect all types of cameras, wiretaps, locators, whether wired or wireless can be detected, the product's wireless detection function, can detect the frequency of �MHz within the range of all wireless devices, can effectively prevent surreptitious filming, wiretapping, tracking and positioning, you can prevent the privacy of the person and the property Damage. Power on: Long press the ON/OFF button for about � seconds, and then hear a "drop" sound. The signal lamps will light up and then go out sequentially, entering the standby mode. The signal lamps will light up in sequence and then go out in sequence to enter the standby mode. Shutdown: Press and hold the On/Off button for about � seconds and hear a "drop" sound to shutdown the device. Finished. �.�G Signal Detection Mode: Tap and press the signal key (MODE key), the red light is on to enter the �.�G band detection and scan the �.�G signal source. Press the on/off key to adjust the sensitivity cyclically, the more the white light is on, the higher the sensitivity, which can be adjusted. The more white lights are on, the higher the sensitivity is, and the search range can be expanded. The less white lights are on, the lower the sensitivity, narrowing the detection range and making it easier to find the transmitter. The top � red light is the strongest signal light, there will be "drip drip drip" sound when it senses the signal (the stronger the signal, the more lights are on). (the stronger the signal, the more lights will light up). Full-band detection mode: Press the signal key (MODE key) and the blue light will be Blue light enters into full band detection, �MHz-�.�G range signal Detection, press the on/off key to adjust the sensitivity, the more white lights are on, the higher the sensitivity, you can expand the search. The more the white light is on, the higher the sensitivity is, which can expand the searching range, and the less the white light is on, the higher the sensitivity is. The less the white light is on, the lower the sensitivity, narrowing the detection range to find the The less the white light is on, the lower the sensitivity, the narrower the detection range, and find the emission source. The top one red light is the strongest signal light, when it senses the signal, there will be a "drip drip drip". signal, there will be a "drip drip drip" sound (the higher the signal, the more lights on). To turn off the alarm: Press and hold the signal key (MODE key) for � seconds to hear a "The alarm is turned off by pressing the signal key (MODE key) for � seconds.(Restore the alarm sound long press the MODE key for � seconds). ➀. Tap the infrared detection button to enter the infrared scanning mode (it is recommended to turn off the room lights), the four infrared lights will be on. Close the room lights), four infrared lights are long bright, put your eyes close to the Observation window, laser light toward the front, the instrument will be up and down, left and right Move the instrument up, down, left and right, scan the surrounding environment, through the special filter for observation through the special filter. If there is a camera lens in front of you, you will find a very strong bright spot flashing. ➁. Tap the on/off button to control the blinking frequency of the infrared light, the infrared light will have � different blinking frequencies, every time you press the button, the infrared light will blink faster. light blinking frequency will be faster, according to the real-time environment to provide the The most correct way to distinguish Camera detection mode: �. Scope of application �.Hotel travel �.Public entertainment places �.Mall fitting rooms �.People who contact and keep trade secrets �.Security personnel of business secrets and technical secrets places �.Professionals in anti-photography, anti-eavesdropping �.Business meetings Note: Please strictly observe the relevant laws of the country where you are using the product. Please strictly observe the laws of the country where you are using this product, and do not use this product for any illegal purpose. Otherwise, you will be responsible for the consequences. Check scanning in hotel rooms, hotels, restrooms, locker rooms, and public restrooms, entertainment venues, automobiles, etc. ➂. Magnetic field detection: Tap the signal key (MODE key) to switch to the green light mode, the magnetic field sensor probe close to the source of the magnetic field, the closer the distance to detect the magnetic field will be the stronger, the more white lights will be lit, indicating that there is a magnetic field nearby or with the presence of strong magnetic suspected items. �、Описание товара �、Продукция Режим обнаружения сигнала �.�G: Нажмите и удерживайте клавишу сигнала (клавиша MODE), загорится красный свет, чтобы войти в режим обнаружения диапазона �.�G и просканировать источник сигнала �.�G. Нажмите кнопку включения/выключения для циклической регулировки чувствительности, чем больше горит белый свет, тем выше чувствительность, которую можно регулировать. Чем больше белых огней горит, тем выше чувствительность, и диапазон поиска может быть расширен. Чем меньше белых огней горит, тем ниже чувствительность, что сужает диапазон обнаружения и облегчает поиск передатчика. Верхний � красный свет является самый сильный сигнальный огонек, при обнаружении сигнала раздается звук "капля-капля-капля" (чем сильнее сигнал, тем больше огоньков горит). (Че…

Text truncated - open the document above for the full version.

Shenzhen Shangjian Technology Co., Ltd Building C,Building B 1510,Lingshang Times, No.66 Baguasi Road, Hualin Community, Yuanling Street Futian District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-7-25 To whom it may concern: We, Shenzhen Shangjian Technology Co., Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2BC6D-T01) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature xiang Xiao Manager Shenzhen Shangjian Technology Co., Ltd 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Shenzhen Shangjian Technology Co., LTD Building C, Building B 1501, Lingshang Times, No.66, Baguasi Road, Hualin Community, Yuanling Street, Futian District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024/07/25 U.S. Agent Designation Shenzhen Shangjian Technology Co., LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BC6D-T01): Name and company of U.S. agent: REP America LLC Physical U.S. address of agent: 1942 Broadway St. STE 314C Boulder, CO 80302 United States FRN of U.S. agent: 0034192500 Email address of U.S. agent: [email protected] REP America LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Shangjian Technology Co., LTD Shenzhen Shangjian Technology Co., LTD with the FRN [0034217232] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Xiang Xiao CEO Shenzhen Jingyun Wulian Technology CO.,Ltd Signature Ben Xu Manager REP America LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-7-25> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BC6D-T01 T01 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： xiang Xiao/Manager Company: Shenzhen Shangjian Technology Co., Ltd Address: Building C,Building B 1510,Lingshang Times, No.66 Baguasi Road, Hualin Community, Yuanling Street Futian District, Shenzhen China Phone: +86 18818523886 Fax: N/A E-Mail: [email protected]

Shenzhen Shangjian Technology Co., Ltd Building C,Building B 1510,Lingshang Times, No.66 Baguasi Road, Hualin Community, Yuanling Street Futian District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-7-25 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BC6D-T01 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： xiang Xiao/Manager Company: Shenzhen Shangjian Technology Co., Ltd Address: Building C,Building B 1510,Lingshang Times, No.66 Baguasi Road, Hualin Community, Yuanling Street Futian District, Shenzhen China Phone: +86 18818523886 Fax: N/A E-Mail: [email protected]

FCC ID: 2BC6D-T01 External Photos of the EUT FCC ID: 2BC6D-T01 FCC ID: 2BC6D-T01

Label and Location Size: L: 1.0cm*W: 0.2cm Label and Location FCC ID : 2BC6D-T01

FCC ID: 2BC6D-T01 Internal Photos of the EUT FCC ID: 2BC6D-T01 FCC ID: 2BC6D-T01

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn TEST REPORT 47 CFR FCC Part 15 Subpart B (Class B) Radio Frequency Devices – Unintentional Radiators – Limits and methods of measurement ANSI C63.4: 2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Report Reference No. ..................... : FCC ID. ............................................ : CTA24071201301 2BC6D-T01 Compiled by ( position+printed name+signature) .. : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .. : Project Engineer Xudong Zhang Approved by ( position+printed name+signature) .. : RF Manager Eric Wang Date of issue ..................................... : Jul. 17, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Shenzhen Shangjian Technology Co., LTD Address ............................................ : Building C, Building B 1501, Lingshang Times, No.66, Baguasi Road, Hualin Community, Yuanling Street, Futian District, Shenzhen, China Test specification ...........................: Standard ........................................... : 47 CFR FCC Part 15 Subpart B (Class B) ANSI C63.4: 2014 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description...................: Camera detector Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Shangjian Technology Co., LTD Model/Type reference....................... : T01 List Model ......................................... : N/A Ratings ............................................. : DC 3.7V From battery and DC 5.0V From external circuit Result................................................ : PASS Report No.: CTA24071201301 Page 2 of 22 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Camera detector Model /Type : T01 Listed Models : N/A Applicant : Shenzhen Shangjian Technology Co., LTD Address : Building C, Building B 1501, Lingshang Times, No.66, Baguasi Road, Hualin Community, Yuanling Street, Futian District, Shenzhen, China Manufacturer : Shenzhen Shangjian Technology Co., LTD Address : Building C, Building B 1501, Lingshang Times, No.66, Baguasi Road, Hualin Community, Yuanling Street, Futian District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24071201301 Page 3 of 22 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1. T E S T S T A N D A R D S ................................................................. 4 2. S U M M A R Y ............................................................................ 5 2.1. General Remarks 5 2.2. Product Description 5 2.3. EUT operation mode 5 2.4. EUT configuration 5 2.5. Modifications 5 3. T E S T E N V I R O N M E N T .............................................................. 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Environmental conditions 6 3.4. Test Description 6 3.5. Statement of the measurement uncertainty 6 3.6. Equipments Used during the Test 7 4. T E S T C O N D I T I O N S A N D R E S ULTS ............................................. 9 4.1. EMISSION 9 4.1.1. LIMITS OF DISTURBANCE (CLASS B) ........................................................................ 9 4.1.2. TEST CONFIGURATION ............................................................................................... 9 4.1.3. TEST PROCEDURE ...................................................................................................... 9 4.1.4. TEST RESULTS ........................................................................................................... 10 4.2. Conducted Emission 14 4.2.1. LIMITS OF DISTURBANCE (CLASS B) ...................................................................... 14 4.2.2. TEST CONFIGURATION ............................................................................................. 14 4.2.3. TEST PROCEDURE .................................................................................................... 14 4.2.4. TEST RESULTS ........................................................................................................... 14 5. T E S T S E T-UP P H O T O S O F T H E E U T ........................................ 17 6. E X T E R N A L A N D I N T E R N A L P H O T O S O F T H E E U T ...................... 18 Report No.: CTA24071201301 Page 4 of 22 Shenzhen CTA…

Text truncated - open the document above for the full version.

FCC ID: 2BC6D-T01 Test Setup Photos of the EUT Radiated Emission Conducted Disturbance Radiated Emissione (Above 1GHz)