2BC7H-BLUENRG1Bluetooth Module

Features • Bluetooth Low Energy system-on-chip Bluetooth v5.2 certified, supporting: – Master, slave and multiple simultaneous roles – Le Privacy 1.2 and LE Secure Connection • Operating supply voltage: from 1.7 to 3.6 V • Integrated linear regulator and DC-DC step-down converter • Operating temperature range: -40 °C to 105 °C • High performance, ultra-low power Cortex-M0 32-bit based architecture core • Programmable 160 kB Flash • 24 kB RAM with retention (two 12 kB banks) • 1 x UART interface • 1 x SPI interface • 2 x I²C interface • 14 or 15 GPIOs • 2 x multifunction timer • 10-bit ADC • Watchdog and RTC • DMA controller • PDM stream processor • 16 or 32 MHz crystal oscillator • 32 kHz crystal oscillator • 32 kHz ring oscillator • Battery voltage and temperature sensors • Up to +8 dBm available output power (at antenna connector) • Excellent RF link budget (up to 96 dB) • Accurate RSSI to allow power control • 8.3 mA TX current (@ -2 dBm, 3.0 V) • Down to 1 μA current consumption with active BLE stack (sleep mode) • ST companion integrated balun/filter chips are available • Average advertisement current consumption 15.34 μA (advertisement interval 1000 ms) – 1 year, 8 months, 19 days with 230 mAh battery (CR2032) • Average connection current consumption 7.059 μA (connection interval 1000 ms) – 3 years, 10 months, 12 days with 230 mAh battery (CR2032) • Suitable for building applications compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 part 15, ARIB STD- T66 • Pre-programmed bootloader via UART • QFN32 and WCSP34 package options Applications • Watches • Fitness, wellness and sports Product status link BlueNRG-1 Bluetooth® Low Energy wireless system-on-chip BlueNRG-1 Datasheet DS11481 - Rev 10 - September 2021 For further information contact your local STMicroelectronics sales office. www .st.com • Consumer medical • Security/proximity • Remote control • Home and industrial automation • Assisted living • Mobile phone peripherals • Lighting • PC peripherals BlueNRG-1 DS11481 - Rev 10 page 2/167 1Description The BlueNRG-1 is a very low power Bluetooth low energy (BLE) single-mode system-on-chip, compliant with Bluetooth specifications. The BlueNRG-1 extends the features of award-winning BlueNRG network processor, enabling the usage of the embedded Cortex M0 to run the user application code. The BlueNRG-1 includes 160 kB of programming Flash memory, 24 kB of static RAM memory with retention (two 12 kB banks) and SPI, UART, I²C standard communication interface peripherals. It also features multifunction timers, watchdog, RTC and DMA controller. An ADC is available to interface with analog sensors, and to read the measurement of the integrated battery voltage sensor. A digital filter is available to process a PDM stream. The BlueNRG-1 offers the same excellent RF performance of the BlueNRG radio, and the integrated high efficiency DC-DC converter keeps the same ultra-low power characteristics, but the BlueNRG-1 improves the BlueNRG sleep mode current consumption allowing a further increase in the battery lifetime of the applications. Figure 1. BlueNRG-1 architecture RF AFE LDOs RcoscXosc Modulation Demodulation Blue Cortex - M0 DMA AHB Bus matrix 3x Masters 7x Slaves Flash Controller 12 kB SRAM Switchable 12 kB SRAM always On AHB2APB bridge PKA 4 kB SRAM RNG 160 kB Flash Array 14 or 15 x GPIOs SPI UART 2x I2C 2x MFT W atchdog RTC CRMU (Clock and Reset Management Unit) ADC IF AUX ADC BlueNRG-1 Description DS11481 - Rev 10 page 3/167 Figure 2. BlueNRG-1 bus architecture A P B A H B AHB-APB Bridge SPI 2 x I2C UART 2 x MFT WDG RTC GPIOs CM0 FLASH (160 kB) RAM (24 kB) DMA 2.4 GHz radio RNG ADC SWD PKA BlueNRG-1 Description DS11481 - Rev 10 page 4/167 2BlueNRG-1 Bluetooth low energy stack The BlueNRG-1 is complemented with a Bluetooth low energy stack C library that provides: •Master , slave role support • GAP: central, peripheral, observer or broadcaster roles • ATT/GATT: client and server • SM: privacy, authentication and authorization • L2CAP • Link layer: AES-128 encryption and decryption The BlueNRG-1 can be configured to support single chip or network processor applications. In the first configuration, the BlueNRG-1 operates as single device in the application for managing both the application code and the Bluetooth low energy stack. The whole Bluetooth low energy stack is provided as object code in a single library file whereas the GATT low energy profiles are provided as object codes in separate libraries. The figure below shows the single chip RF software layers. Figure 3. BlueNRG-1 single-chip RF software layers The BlueNRG-1 can be configured to operate as a network coprocessor. In this case, dedicated firmware is provided to support the interface with an external application processor. The whole Bluetooth low energy stack runs in the BlueNRG-1; the GA TT profiles are provided to run in the application processor together with the application code. The figure below shows the network processor RF software layers. BlueNRG-1 BlueNRG-1 Bluetooth low energy stack DS11481 - Rev 10 page 5/167 Figure 4. BlueNRG-1 network processor RF software layers BlueNRG-1 BlueNRG-1 Bluetooth low energy stack DS11481 - Rev 10 page 6/167 3Functional details The BlueNRG-1 integrates: •ARM Cortex-M0 core • Interrupts management • 160 kB Flash memory • 24 kB of RAM with two retention options (12 kB or 24 kB) • Power management • Clocks • Bluetooth low energy radio • Random number generator (RNG) (reserved for Bluetooth low energy protocol stack, but user applications can read it) • Public key cryptography (PKA) (reserved for Bluetooth low energy protocol stack) • Peripherals: – SPI interface – UART interface – I²C bus interface – GPIO – Multifunction timer – DMA controller – Watchdog – RTC – ADC with battery voltage sensor and temperature sensor – PDM stream processor 3.1Core The ARM ® Cortex ® -M0 processor has been developed to provide a low-cost platform that mee…

Text truncated - open the document above for the full version.

C5266091_X23_Ed.1 1/1 USAGENTLETTEROFATTESTATION USAgent: CompanyName: BaihetianInnovativeSolutions ContactName:KennethYoung Address:6837ChaseRdDearborn,MI48126 TelephoneNo: :313-395-3113 FaxNo:/ Email: [email protected] FRN: 0033401605 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 TheApplicantacknowledgetheacceptanceofitsobligationtomaintainanagentfor serviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthe granteehaspermanentlyterminatedallmarketingandimportationoftheapplicable equipmentwithintheU.S.,ortheconclusionofanyCommission-related administrativeorjudicialproceedinginvolvingtheequipment,whicheverislater This letter is to confirm that we have accepted the responsibility to act as US agent representative on behalf of the ( ) noted below for all future FCC certification/ registrations obtained during the period of this agreement, which ends at the specified date below. As per US agent, we are aware of the requirements involved as outlined in FCC Equipment Authorization Program in their Report and Order FCC 22-84 and the clause § 2.911 Application requirements. Applicant Company name: . USAgent’sName: KennethYoung Title: / Signatur Date:2023-12-20 Applicant’s Name: Title:/ Signaturee Granteecode: FCC ID: Contact Name: Address: TelephoneNo: FaxNo: Email: FRN: / Shenzhen ZTW Model Science & Technology Co.,Ltd Shenzhen ZTW Model Science & Technology Co.,Ltd 2BC7H-BLUENRG Sales Manager 1 2/F, Block 1, GuanFeng Industrial Park,Jiuwei, Xixiang, Baoan Hugo Huang Shenzhen, Guangdong +86 755 29120026 [email protected] 0034352252 Hugo Huang Sales Manager

ShenzhenZTWModelScience&TechnologyCo.,Ltd (2024/6/19) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID：2BC7H-BLUENRG1) [ShenzhenZTWModelScience&TechnologyCo.,Ltd](“theapplicant”)certifies thattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. Sincerely, (Applicantsignature) (Applicantprintedname)：HugoHuang ShenzhenZTWModelScience&TechnologyCo.,Ltd (2024/6/19) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID：2BC7H-BLUENRG1) [ ShenzhenZTWModelScience&TechnologyCo.,Ltd ](“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedonthe CoveredListasanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)： HugoHuang

THISMUSTBESIGNEDBYTHEAPPLICANT/AGENTANDSHOULDBE PLACEDONAPPROPRIATELETTERHEAD RequestforModular/LimitedModularApproval Date:June20,2024 Subject:Manufacturer’sDeclarationfor☒-ModularApproval☐-SplitModularApproval ☐-LimitedModularApproval☐-LimitedSplitModularApproval ConfidentialityRequestfor:______2BC7H-BLUENRG1_____ 8BasicRequirements–FCCPart15.212(a)(1) ForItemsMarked“NO(*)”,theLimitedModuleDescriptionMustbeFilledOutontheFollowingPages ModularApprovalRequirementRequirementMet 1.ThemodulartransmittermusthaveitsownRFshielding.Thisisintendedtoensurethatthemodule doesnothavetorelyupontheshieldingprovidedbythedeviceintowhichitisinstalledinorderforall modulartransmitteremissionstocomplywithFCClimits.Itisalsointendedtopreventcoupling betweentheRFcircuitryofthemoduleandanywiresorcircuitsinthedeviceintowhichthemoduleis installed.Suchcouplingmayresultinnon-compliantoperation.Thephysicalcrystalandtuning capacitorsmaybelocatedexternaltotheshieldedradioelements.15.212(a)(1)(i) ☒-YES☐-NO(*) Details:ThemodulecontainsametalshieldwhichcoversallRFcomponentsandcircuitry.Theshieldislocatedonthetopof theboardnexttoantennaconnector> 2.Themodulartransmittermusthavebufferedmodulation/datainputs(ifsuchinputsareprovided)to ensurethatthemodulewillcomplywithFCCrequirementsunderconditionsofexcessivedataratesor over-modulation.15.212(a)(1)(ii) ☒-YES☐-NO(*) Details:<Datatothemodulationcircuitisbufferedasdescribedintheoperationaldescriptionprovidedwiththeapplication 3.Themodulartransmittermusthaveitsownpowersupplyregulationonthemodule.Thisisintendedto ensurethatthemodulewillcomplywithFCCrequirementsregardlessofthedesignofthepower supplyingcircuitryinthedeviceintowhichthemoduleisinstalled.15.212(a)(1)(iii) ☒-YES☐-NO(*) Details:Themodulecontainsitsownpowersupplyregulation.Pleaserefertoschematicfiledwiththisapplication 4.Themodulartransmittermustcomplywiththeantennaandtransmissionsystemrequirementsof§§ 15.203,15.204(b),15.204(c),15.212(a),and2.929(b).Theantennamusteitherbepermanently attachedoremploya‘‘unique’’antennacoupler(atallconnectionsbetweenthemoduleandthe antenna,includingthecable).The‘‘professionalinstallation’’provisionof§15.203isnotapplicable tomodulesbutcanapplytolimitedmodularapprovalsunderparagraph15.212(b).15.212(a)(1)(iv) ☒-YES☐-NO(*) Details:ThemoduleconnectstoitsantennausinganUFLconnectorwhichisconsideredanon-standardconnector.Alistof antennastestedandapprovedwiththisdevicemaybefoundinusersmanualprovidedwiththeapplication 5.Themodulartransmittermustbetestedinastand-aloneconfiguration,i.e.,themodulemustnotbe insideanotherdeviceduringtesting.Thisisintendedtodemonstratethatthemoduleiscapableof complyingwithPart15emissionlimitsregardlessofthedeviceintowhichitiseventuallyinstalled. Unlessthetransmittermodulewillbebatterypowered,itmustcomplywiththeAClineconducted requirementsfoundinSection15.207.ACorDCpowerlinesanddatainput/outputlinesconnectedto themodulemustnotcontainferrites,unlesstheywillbemarketedwiththemodule(seeSection 15.27(a)).Thelengthoftheselinesshallbelengthtypicalofactualuseor,ifthatlengthisunknown,at least10centimeterstoinsurethatthereisnocouplingbetweenthecaseofthemoduleandsupporting equipment.Anyaccessories,peripherals,orsupportequipmentconnectedtothemoduleduringtesting shallbeunmodifiedorcommerciallyavailable(seeSection15.31(i)).15.212(a)(1)(v) ☒-YES☐-NO(*) Details:Themodulewastestedstand-aloneasshownintestsetupphotographsfiledwiththisapplication THISMUSTBESIGNEDBYTHEAPPLICANT/AGENTANDSHOULDBE PLACEDONAPPROPRIATELETTERHEAD ModularApprovalRequirementRequirementMet 6.ThemodulartransmittermustbelabeledwithitsownFCCIDnumber,oruseanelectrondisplay(see KDBPublication784748). IfusingapermanentlyaffixedlabelwithitsownFCCIDnumber,iftheFCCIDisnotvisiblewhen themoduleisinstalledinsideanotherdevice,thentheoutsideofthedeviceintowhichthemoduleis installedmustalsodisplayalabelreferringtotheenclosedmodule.Thisexteriorlabelcanusewording suchasthefollowing:“ContainsTransmitterModuleFCCID:XYZMODEL1” （填上本次的 ID ） or “ContainsFCCID:XYZMODEL1.（填上本次的ID）”Anysimilarwordingthatexpressesthesame meaningmaybeused.TheGranteemayeitherprovidesuchalabel,anexampleofwhichmustbe includedintheapplicationforequipmentauthorization,or,mustprovideadequateinstructionsalong withthemodulewhichexplainthisrequirement.Inthelattercase,acopyoftheseinstructionsmustbe includedintheapplicationforequipmentauthorization. IfthemodulartransmitterusesanelectronicdisplayoftheFCCidentificationnumber,theinformation mustbereadilyaccessibleandvisibleonthemodulartransmitteroronthedeviceinwhichitis installed.Ifthemoduleisinstalledinsideanotherdevice,thentheoutsideofthedeviceintowhichthe moduleisinstalledmustdisplayalabelreferringtotheenclosedmodule.Thisexteriorlabelcanuse wordingsuchasthefollowing:“ContainsFCCcertifiedtransmittermodule(s).”Anysimilarwording thatexpressesthesamemeaningmaybeused.Theusermanualmustincludeinstructionsonhowto accesstheelectronicdisplay.Acopyoftheseinstructionsmustbeincludedintheapplicationfor equipmentauthorization.15.212(a)(1)(vi) ☒-YES☐-NO(*) Details:Thereisalabelonthemoduleasshowninthelabelingexhibitfiledwiththisapplication.Hostspecificlabeling instructionsareshownintheinstallationmanual.filedwiththisapplication. 7.Themodulartransmittermustcomplywithallspecificruleoroperatingrequirementsapplicabletothe transmitter,includingalltheconditionsprovidedintheintegrationinstructionsbythegrantee.Acopy oftheseinstructionsmustbeincludedintheapplicationforequipmentauthorization.Forexample, thereareverystrictoperationalandtimingrequirementsthatmustbemetbeforeatransmitteris authorizedforoperationunderSection15.231.Forinstance,datatransmissionisprohibited,exceptfor operationunderSection15.231(e),inwhichcasethereareseparatefieldstrengthlevelandtiming requirements.Compliancewiththeserequirementsmustbeassured.15.212(a)(1)(vii) ☒-YES☐-NO(*) Details:ThemodulecomplieswithFCCPart15Crequirements.InstructionstotheOEMinstallerareprovidedinthe installationmanualfiledwiththisapplication. 8.ThemodulartransmittermustcomplywithanyapplicableRFexposurerequi…

Text truncated - open the document above for the full version.

ShenzhenZTWModelScience&TechnologyCo.,Ltd (2024/6/19) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR(Product ： Bluetooth Module/Model：BLUENRG1-ESC/FCCID:2BC7H-BLUENRG1) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe Schematics Blockdiagram Operationdescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublic review. Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoour Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, <Signature> Name：HugoHuang Title ： SalesManager Company ： ShenzhenZTWModelScience&TechnologyCo.,Ltd .

ShenzhenZTWModelScience&TechnologyCo.,Ltd (2024/6/19) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorize(BlueAsiaofTechnicalServices(Shenzhen) Co.,Ltd. ） toactonourbehalfinallmattersrelatingtoapplicationforequipmentauthorization, includingthesigningofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, <Signature> Name：HugoHuang Title：SalesManager Company ： ShenzhenZTWModelScience&TechnologyCo.,Ltd

Product Name :BluetoothModule

Product:BLUENRG1-ESC FCCID:2BC7H-BLUENRG1 Model:BLUENRG1-ESC

Product Name :BluetoothModule

RFExposureevaluation ProductName: BluetoothModule FCCID: 2BC7H-BLUENRG1 TestStandard: KDB447498D04GeneralRFExposureGuidance v01 Accordingto447498D04InterimGeneralRFExposureGuidancev01 Antgain= -10.5 dBi MAXoutputpower：1.049dBm@2480MHz ERP=1.049-10.5-2.15=-1.601dBm WORSECASE: 10^-0.1601=0.692mW<2.715mW ThenSARevaluationisnotrequired

September 2016 Multilayer Antenna For 2400-2484MHz ANT016008LCS2442MA2 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] RF Components RF Components • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20160926 / rf_ant_ant016008lcs2442ma2_summary Multilayer Antenna For 2400-2484MHz SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERNSOLDER RESIST PATTERN ANT016008LCS2442MA2 Conformity to RoHS Directive 1.60±0.10 ( 0.1 ) ( 0.1 ) 0.40max. 0.80±0.10 0.63±0.10 0.215±0.100.25±0.10 0.20±0.10 Dimensions in mm [Top view] [Bottom view] 1 Radiator electrode 2 Dummy pad 3 Dummy pad 4 Feed point 5 Dummy pad 6 Dummy pad Terminal functions ( 1 ) ( 4 ) ( 5 )( 6 ) ( 2 )( 3 ) Dimensions in mm 0.6 0.9 1.6 0.21 0.73 0.8 Dimensions in mm 0.7 3 0.60 0.90 1.53 0.11 RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html RF Components • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20160926 / rf_ant_ant016008lcs2442ma2_summary ANT016008LCS2442MA2 EVALUATION BOARD Measurement condition for Radiation Pattern PCB size : 50mm x 10mm x 1mm Antenna area : 6 x 2.5 mm Ft-1 Mt 2.0nH(MLG060 3P2N0:TDK) 3.0nH(MLG0603P3N0:TDK) Component P/N Mt ANT016008LCS2442MA2 Ft-1 PCB Z Y X Er θ Eθ Eø ø Chip antenna RF Components • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20160926 / rf_ant_ant016008lcs2442ma2_summary ANT016008LCS2442MA2 ELECTRICAL CHARACTERISTICS This is typical antenna performance with the standard PCB. TEMPERATURE RANGE FREQUENCY CHARACTERISTICS EFFICIENCY AND VSWR • Tested antenna has been soldered. Evaluation board size is 50x10x1 mm. Item Frequency Range (MHz) Min.Typ.Max. VSWR2400 to 2484—1.603.0 PolarizationLinear PCB size (mm)5010 Antenna keep-out area (mm)62.5 Characteristic Impedance ()50 (Nominal) Operating temperatureStorage temperature （°C）（°C） –40 to +85–40 to +85 –10 –9 –8 –6 –7 –3 –4 –1 –5 –2 0 Efficiency ( dB ) 1 11 10 9 8 7 6 5 4 3 2 VSWR Frequency ( GHz ) 2.3002.4002.5002.600 Efficiency Spec ( VSWR ) VSWR RF Components • All specifications are subject to change without notice. • Bef ore using these products, be sure to request the delivery specifications. 20160926 / rf_ant_ant016008lcs2442ma2_summary ANT016008LCS2442MA2 RADIATION PATTERNS • Tested antenna has been soldered. Evaluation board size is 50x10x1 mm. 270 ̊90 ̊ 0 ̊ X Y Z 270° 315° 135° 45° 225° 90° 0 –10 10 ( dBi ) –20 –30 –50 –40 0° 180° Horizontal polarization Frequency (MHz) Average ( dBi ) Maximum ( dBi ) Minimum ( dBi ) 2400 –16.1 –10.5 –26.9 2442 –16.0 –11.3 –26.5 2484 –16.4 –11.7 –31.9 2400MHz 2442MHz 2484MHz 270° 315° 135° 45° 225° 90° 0 –10 10 ( dBi ) –20 –30 –50 –40 0° 180° Vertical polarization Frequency (MHz) Average ( dBi ) Maximum ( dBi ) Minimum ( dBi ) 2400 –1.4 –0.5 –2.4 2442 –0.8 0.0 –2.1 2484 –1.6 –0.9 –3.0 2400MHz 2442MHz 2484MHz 270° 90° 0° Y X Z 270° 315° 135° 45° 225° 90° 0 –10 10 ( dBi ) –20 –30 –50 –40 0° 180° Horizontal polarization Frequency (MHz) Average ( dBi ) Maximum ( dBi ) Minimum ( dBi ) 2400 –4.3 1.6 –21.9 2442 –3.6 2.5 –24.0 2484 –4.2 2.0 –25.5 2400MHz 2442MHz 2484MHz 270° 315° 135° 45° 225° 90° 0 –10 10 ( dBi ) –20 –30 –50 –40 0° 180° Vertical polarization Frequency (MHz) Average ( dBi ) Maximum ( dBi ) Minimum ( dBi ) 2400 –17.5 –11.1 –30.4 2442 –16.8 –10.4 –36.3 2484 –17.0 –10.4 –53.3 2400MHz 2442MHz 2484MHz 270 ̊ 90 ̊ 0 ̊ Y Z X 270° 315° 135° 45° 225° 90° 0 –10 10 ( dBi ) –20 –30 –50 –40 0° 180° Horizontal polarization Frequency (MHz) Average ( dBi ) Maximum ( dBi ) Minimum ( dBi ) 2400 –3.9 –0.5 –29.4 2442 –3.3 0.2 –28.7 2484 –4.0 –0.3 –34.7 2400MHz 2442MHz 2484MHz 270° 315° 135° 45° 225° 90° 0 –10 10 ( dBi ) –20 –30 –50 –40 0° 180° Vertical polarization Frequency (MHz) Average ( dBi ) Maximum ( dBi ) Minimum ( dBi ) 2400 –18.7 –14.8 –26.3 2442 –18.6 –15.0 –25.3 2484 –19.8 –16.7 –29.1 2400MHz 2442MHz 2484MHz RF Components • All specifications are subject to change without notice. • Bef ore using these products, be sure to request the delivery specifications. RECOMMENDED REFLOW PROFILE  t3 : Time within 5°C of actual peak temperature The maximum number of reflow is 3. Preheating Soldering Critical zone (T3 to T4)Peak Temp.TimeTemp.TimeTemp.Time T1T2t1T3t2T4t3  150°C200°C60 to 120sec217°C60 to 120sec240 to 260°C30sec max. t3 t1 Preheating t2 Soldering T3T3 T4 T2 T1 t: Time T: Temperature Peak 6°C/sec or lower 3°C/sec or lower RF Components • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20160926 / rf_ant_ant016008lcs2442ma2_summary ANT016008LCS2442MA2 PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY Dimensions in mm ABCDEFGHJKt 0.97±0.05 1.8±0.058.0±0.23.5±0.05 1.75±0.14.0±0.12.0±0.054.0±0.1 1.5+0.1/-0 0.55max. 0.25±0.05 Standard package quantity (pieces/reel) 4,000 2.0±0.5 ø21±0.8 Dimensions in mm 13.0±1.0 9.0 +1.0 –0.0 ø180 +0 –1.5 ø13±0.2 ø 60 +1.0–0.0 C D t K E H F G J B A Material of carrier the tape: PS RF Components • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20160926 / rf_ant_ant016008lcs2442ma2_summary 使用注意事项 在使用本产品前，请务必随附采购规格书。 安全注意事项 使用本产品时，请注意安全事项。 本产品目录中记载的产品是指在通用标准用途意义上使用于一般电子设备（AV 设备，通信设备，家电产品，娱乐设备，计算机设备，个 人设备，办公设备，计测设备，工业机器人），并且该一般电子设备要在通常的操作和使用方法下使用。 对于需要高度安全性和可靠性的，或者设备的故障，误动作，运转不良可能会给人的生命，身体及财产等造成损害，以及有可能产生莫大 社会影响的以下用途（以下称‘ 特定用途’）中的适用性，性能发挥，品质，本公司不予保证。 产品被在本产品目录的范围、条件之外，或者在特定用途中使用时，本公司对它造成的损害和信赖性不承担任何责任。 (1)航天航空设备 (2)交通运输设备（汽车，电动火车，船舶等） (3)医疗设备 (4)发电控制设备 (5)原子能源相关设备 (6)海底设备 (7)交通控制设备 (8)公共信息处理设备 (9)军事设备 (10)电加热设备、燃烧设备 (11)防灾/预防犯罪设备 (12)安全设备 (13) 其他不被视为常规用途的用途 为了能够更安全地使用产品，对使用本产品目录中所记载产品的设备进行设计时，请确保符合该设备的使用用途及状态的保护回路和装 置，并设置备用回路等。 注 意

Website:www.cblueasia.com Tel:+86-755-23059481 Email:[email protected] ThetestreportiseffectiveonlywithbothsignatureandspecializedstampandTheresult(s)showninthisreportreferonlytothesample(s)tested.Without writtenapprovalofBlueAsia,thisreportcan ’ tbereproducedexceptinfull.Theresultsdescribedinthisreportdonotrepresentthequalityorcharacteristicsofthe sampledbatch,nordotheyrepresentanysimilaroridenticalproductsthatarenotexplicitlystated. TestReport Applicant: ShenzhenZTWModelScience&Technology Co.,Ltd Address: 2/F,Block1,GuanFengIndustrialPark,Jiuwei NewVillage,Xixiang,Baoan,Shenzhen,China, ZipCode:518126 ProductName:BluetoothModule BrandMark:N/A Model:BLUENRG1-ESC FCCID:2BC7H-BLUENRG1 ReportNumber:BLA-EMC-202405-A8901 DateofReceipt:2024.05.24 DateofTest:2024.05.24to2024.06.11 TestStandard:47CFRPart15,SubpartC15.247 TestResult:Pass Compiledby:Reviewby:Approvedby: IssuedDate:2024.06.11 BlueAsiaofTechnicalServices(Shenzhen)Co.,Ltd. Address:BuildingC,No.107,ShihuanRoad,ShiyanSub-District,BaoanDistrict, Shenzhen,GuangdongProvince,China ReportNo.:BLA-EMC-202405-A8901 Page 2 of 58 BlueAsiaofTechnicalServices(Shenzhen)Co.,Ltd. Tel:+86-755-23059481 Email:[email protected] TableofContents 1Generalinformation................................................................................................................................................4 1.1Generalinformation..........................................................................................................................................4 1.2GeneraldescriptionofEUT..............................................................................................................................4 2Testsummary..........................................................................................................................................................5 3TestConfiguration..................................................................................................................................................6 3.1Testmode.........................................................................................................................................................6 3.2OperationFrequencyeachofchannel.............................................................................................................7 3.3Testchannel.....................................................................................................................................................7 3.4ConfigurationdiagramofEUT..........................................................................................................................7 3.5Auxiliaryequipment..........................................................................................................................................8 3.6Testenvironment..............................................................................................................................................8 4Laboratoryinformation..........................................................................................................................................9 4.1Laboratoryandaccreditations..........................................................................................................................9 4.2Measurementuncertainty.................................................................................................................................9 5Testequipment......................................................................................................................................................10 6Testresult..............................................................................................................................................................11 6.1Antennarequirement......................................................................................................................................11 6.2ConductedemissionsatACpowerline(150kHz-30MHz)...........................................................................12 6.3ConductedpeakoutputPower.......................................................................................................................16 6.4Minimum6dBbandwidth................................................................................................................................17 6.5Powerspectrumdensity.................................................................................................................................18 6.6ConductedBandEdgesMeasurement..........................................................................................................19 6.7Conductedspuriousemissions......................................................................................................................20 6.8Radiatedspuriousemissions.........................................................................................................................21 6.9Radiatedemissionswhichfallintherestrictedbands...................................................................................32 7AppendixA............................................................................................................................................................39 AppendixB:photographsoftestsetup......................................................................................................................54 AppendixC:photographsofEUT................................................................................................................................56 ReportNo.:BLA-EMC-202405-A8901 Page 3 of 58 BlueAsiaofTechnicalServices(Shenzhen)Co.,Ltd. Tel:+86-755-23059481 Email:[email protected] ReviseRecord VersionNo.DateDescription 012024.06.11Original ReportNo.:BLA-EMC-202405-A8901 Page 4 of 58 BlueAsiaofTechnicalServices(Shenzhen)Co.,Ltd. Tel:+86-755-23059481 Email:[email protected] 1Generalinformation 1.1Ge…

Text truncated - open the document above for the full version.

Product Name : Bluetooth Module Conducted emissions at AC power line (150kHz-30MHz) Radiated Emissions (30MHz-1GHz) Radiated Emissions (above 1GHz)