2BC8T-B1smart watch

Smart watch manual Adapt to platform requirements: Android 5.0 and above mobile phones IOS 9.0 and above mobile phones Support Bluetooth BT 3.0 APP download method：  IOS/Android phone users: scan the above QR code to download and install the application.  Android: Search for "HryFine" through the software application store to download and install the application.  Apple: Search for "HryFine" through the App store to download and install the app.  WeChat: Follow the official account "Deer Enjoy Planet", you can get the download link to download on the official account. Initial use  To ensure the normal use of the watch, please charge it first.  The contact of the charging clip connected to the power supply can be charged with the contact on the back of the watch. Note: The reverse contact point will cause the battery to short-circuit. Watch and APP connection  The permissions during the APP installation process are fully agreed, and the watch and the mobile phone must be connected to the APP and the mobile phone Bluetooth to achieve all functions.  APP connection method: open the APP and mobile phone Bluetooth, the APP reminds you to enable the notification point to confirm. Click to add a device, search for the device name and click Connect to connect to the watch device.  Mobile phone Bluetooth connection: Bluetooth must be turned on on the watch side, enter the mobile phone Bluetooth, search for the Bluetooth device of the model name, and click Connect to pair.  Simple solution to common Bluetooth problems: Due to the lack of uniformity in the Bluetooth protocol of various mobile phone brands, sometimes the Bluetooth connection between the mobile phone and the watch may be unstable. You can turn off the Bluetooth of the mobile phone and reconnect it again, or reset the watch to the factory settings, such as The watch is in a dead state, you can press and hold the power button for 10 seconds to restart the watch.  How to connect BT3.0 Bluetooth: Enter the Bluetooth terminal of the mobile phone and search for Hry3.0 binding.  How to verify that the Bluetooth connection is successful: The bluetooth icon in the upper left corner of the main menu is oval to indicate that the Bluetooth connection is successful. Use the watch to click to find the phone or enter the APP to find the watch. If there is vibration, it means that the APP is connected successfully.  If the watch has an incoming call, there is no notification reminder on QQ WeChat, you need to set the phone settings-notification settings, open the corresponding application and open the notification application to receive information notification. Watch operating instructions：  Power button: Up button: short press to return, down button: wake up/off the screen and long press can be used to switch the machine.  Clock interface: slide the dial interface left and right to preview or switch the dial, slide up and down to enter the main menu directly Watch function introduction  Standby interface: enter the standby interface.  Dial pad: connect to the mobile phone to dial out via Bluetooth, and you can make a call on the watch side.  Contact: After the bracelet is successfully connected to the APP, you can add a contact in the APP. After the contact is successfully added, the phone book of the bracelet will be displayed synchronously. Click the contact in the phone book on the bracelet to make a call (Note: The bracelet needs Connect mobile phone Bluetooth).  Call record: can display the call record of the wristband, click the phone number to dial.  Information: The content of the message push can be displayed, such as: QQ, WeChat, etc. (The system above IOS12 will block SMS reminders by default).  movement: 1. Enter the sport mode (running, walking, cycling, climbing) selection interface, click again to start the corresponding sport mode data monitoring: exercise time, distance, calories burned and heart rate data. 2. Record: record all exercise data  Pedometer: Calculate your step count data for the day, clear the data at 00:00 in the morning, and view it in the APP.  Sleep monitoring: Turn on sleep detection to monitor the quality of sleep while sleeping.  Sedentary reminder: Set the sedentary time, the bracelet will vibrate when the time is up, and the interface will display a reminder.  Heart rate: Put the watch close to your wrist, and the best place to wear it is on the upper arm of the wrist bone. The real-time heart rate can be measured. The normal value of the average person is 60-100 beats/min.  Blood pressure: Put the watch close to your wrist, the best place to wear it is the wrist bone above the arm, you can measure the real-time blood pressure, adult diastolic blood pressure: 60~80 (mmHg) adult systolic blood pressure: 100~120 (mmHg).  Blood oxygen monitoring: The watch is tightly attached to the wrist, and the best wearing position is on the wrist bone and above the arm. The real-time blood oxygen value can be measured. The normal range of the value is generally 95% to 100%.  Bluetooth camera: When the phone cannot be locked, the watch enters Bluetooth to take a photo when the app interface is opened, the phone will automatically pop up the camera interface, click on the watch to take a photo, the phone will take a photo and store the photo on the phone; or open the APP, Enter the remote control selfie, the phone will pop up the camera interface, and the watch will also take photos when you shake the watch  Bluetooth music: control to play music in the phone.  Find the phone: When the watch is connected to the mobile phone, tap the watch side to find the mobile phone, long press the magnifying glass icon, the mobile phone bell will ring.  Weather: Display the current weather temperature in degrees.  Stopwatch: start stopwatch timing and end timing.  Alarm bell: You can set a custom alarm clock on the APP, and the watch will vibrate to remind you at the point.  Settings: You can set to turn …

Text truncated - open the document above for the full version.

Wellboss Technology Co., Ltd Block A, 1st Gaoqing road Qinghutou Town, Tangxia Area, Dongguan City, Guangdong Province, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-10-24 U.S. Agent Designation Wellboss Technology Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BC8T-B1): Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: [email protected] ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Wellboss Technology Co., Ltd. Wellboss Technology Co., Ltd with the FRN [0034371559] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature ivy liang N/A Wellboss Technology Co., Ltd Signature Scott Huber Senior Technical Director ACT Lab LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Sincerely, Name/Title： ivy liang/N/A Company: Wellboss Technology Co., Ltd Address: Block A, 1st Gaoqing road Qinghutou Town, Tangxia Area, Dongguan City, Guangdong Province, China Phone: 15817276080 Fax: 0755-26509195 E-Mail: [email protected]

FCC ID: 2BC8T-B1 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT

FCC ID: 2BC8T-B1 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 9 Internal of EUT Photo 10 Internal of EUT FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo 11 Appearance of PCB & Battery Photo 12 Appearance of PCB & Battery FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo 13 Appearance of PCB Photo 14 Appearance of PCB BT Antenna FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo 15 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202310-0049-8 Page: 1 of 3 TB-RF-074-1.0 1 A/F., Building.6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao’an, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2BC8T-B1 1. Client Information Applicant : Wellboss Technology Co., Ltd Address : Block A, 1st Gaoqing road Qinghutou Town, Tangxia Area, Dongguan City, Guangdong Province, China Manufacturer : Wellboss Technology Co., Ltd Address : Block A, 1st Gaoqing road Qinghutou Town, Tangxia Area, Dongguan City, Guangdong Province, China 2. General Description of EUT EUT Name : smart watch Model(s) No. : B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, AK9, AK10, AK19, AM9, AM10, AM 11, Watch 9 Pro, Watch10 pro, T900Pro max, M8, M9, M10, M11, ultra 9, ultra 10, ultra 11, W18, W19, W20, T900, T800, S9, S10 Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is appearance. Product Description : Operation Frequency: Bluetooth 5.2: 2402MHz~2480MHz Bluetooth 5.2(BLE): 2402MHz~2480MHz Number of Channel: Bluetooth 5.2: 79 channels Bluetooth 5.2(BLE):40 channels Antenna Gain: 0dBi Wire Antenna Modulation Type: Bluetooth: GFSK, Pi/4-DQPSK, 8-DPSK Bluetooth LE: 1Mbps&2Mbps Power Rating : USB Input: DC 5V/1A DC 3.8V by 300mAh 1.14Wh Rechargeable Li-ion battery Software Version : V1.0 Hardware Version : V1.0 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202310-0049-8 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR Report No.: TBR-C-202310-0049-8 Page: 3 of 3 TB-RF-074-1.0 2. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 6.288 6±1 7 5.012 1.554 3.0 2.441 6.403 6±1 7 5.012 1.566 3.0 2.480 5.768 5±1 6 3.981 1.254 3.0 Bluetooth Mode (Pi/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 5.231 5±1 6 3.981 1.234 3.0 2.441 5.369 5±1 6 3.981 1.244 3.0 2.480 4.811 4±1 5 3.162 0.996 3.0 Bluetooth Mode (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 5.951 5±1 6 3.981 1.234 3.0 2.441 6.034 6±1 7 5.012 1.566 3.0 2.480 5.453 5±1 6 3.981 1.254 3.0 Bluetooth LE Mode(1Mbps) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 6.065 6±1 7 5.012 1.554 3.0 2.440 6.221 6±1 7 5.012 1.566 3.0 2.480 5.494 5±1 6 3.981 1.254 3.0 Bluetooth LE Mode(2Mbps) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 6.038 6±1 7 5.012 1.554 3.0 2.440 6.242 6±1 7 5.012 1.566 3.0 2.480 5.568 5±1 6 3.981 1.254 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF THE REPORT-----

Mo Fre Ga MA Im An Ma

odel Name equency ain (dBi) AX. Gain pedance tenna Leng anufacturer 2400 -1.02 gth A Antenn 0MHz 2dBi Antenna Ph na Speci 2.4G 2450 -0.45 hoto & Le fication G FHSS AN 0MHz 5dBi 0 dBi 50 Ω 18.5mm ength (mm NT 2500 0 dBi m) MHz i XOZ YOZZ XOYY

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 1 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 RF Test Data for Bluetooth LE (Conducted Measurements) General Description of EUT Product Name: smart watch Test Model: B1 Sample ID: HC-C-202310-0049-01-01-2# Environmental Conditions Temperature: 23.8°C Relative Humidity: 48% Test Voltage: DC 3.8V Test Engineer: Zhang Chen Xi Note: For a more detailed features description, please refer to the report TBR-C-202310-0049-66 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 2 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT BLE 1Mbps 2402 Ant1 66.67 1.76 2.38 NVNT BLE 1Mbps 2440 Ant1 66.13 1.8 2.44 NVNT BLE 1Mbps 2480 Ant1 66.13 1.8 2.44 NVNT BLE 2Mbps 2402 Ant1 37.1 4.31 4.35 NVNT BLE 2Mbps 2440 Ant1 36.51 4.38 4.35 NVNT BLE 2Mbps 2480 Ant1 36.51 4.38 4.35 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 3 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT BLE 1Mbps 2402MHz Ant1 Duty Cycle NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 4 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Duty Cycle NVNT BLE 1Mbps 2480MHz Ant1 Duty Cycle NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 5 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Duty Cycle NVNT BLE 2Mbps 2440MHz Ant1 Duty Cycle NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 6 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT BLE 1Mbps 2402 Ant1 6.065 30 Pass NVNT BLE 1Mbps 2440 Ant1 6.221 30 Pass NVNT BLE 1Mbps 2480 Ant1 5.494 30 Pass NVNT BLE 2Mbps 2402 Ant1 6.038 30 Pass NVNT BLE 2Mbps 2440 Ant1 6.242 30 Pass NVNT BLE 2Mbps 2480 Ant1 5.568 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 7 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Test Graphs Power NVNT BLE 1Mbps 2402MHz Ant1 Power NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 8 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Power NVNT BLE 1Mbps 2480MHz Ant1 Power NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 9 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Power NVNT BLE 2Mbps 2440MHz Ant1 Power NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 10 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1Mbps 2402 Ant1 0.66 0.5 Pass NVNT BLE 1Mbps 2440 Ant1 0.65 0.5 Pass NVNT BLE 1Mbps 2480 Ant1 0.65 0.5 Pass NVNT BLE 2Mbps 2402 Ant1 1.13 0.5 Pass NVNT BLE 2Mbps 2440 Ant1 1.23 0.5 Pass NVNT BLE 2Mbps 2480 Ant1 1.16 0.5 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 11 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 Test Graphs -6dB Bandwidth NVNT BLE 1Mbps 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 12 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 -6dB Bandwidth NVNT BLE 1Mbps 2480MHz Ant1 -6dB Bandwidth NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 13 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 -6dB Bandwidth NVNT BLE 2Mbps 2440MHz Ant1 -6dB Bandwidth NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202310-0049-66 Page: 14 of 38 FCC ID: 2BC8T-B1 TB-RF-074-1.0 4. Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT BLE 1Mbps 2402 Ant1 1.007 NVNT BLE 1Mbps 2440 Ant1 1.013 NVNT BLE 1Mbps 2480 Ant1 1.01 NVNT BLE 2Mbps 2402 Ant1 1.961 NVNT BLE 2Mbps 2440 Ant1 1.964 NVNT BLE 2Mbps 2480 Ant1 1.99 Shenzhen Toby Technology Co., Ltd. Http://www.tobyl…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202310-0049-66 Page: 1 of 36 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2BC8T-B1 Report No. : TBR-C-202310-0049-66 Applicant : Wellboss Technology Co., Ltd Equipment Under Test (EUT) EUT Name : smart watch Model No. : B1 Series Model No. : Please refer to page 6 Brand Name : ---- Sample ID : HC-C-202310-0049-01-01-1#& HC-C-202310-0049-01-01-2# Receipt Date : 2023-10-16 Test Date : 2023-10-16 to 2023-10-24 Issue Date : 2023-10-24 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Wade. Lv Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202310-0049-66 Page: 2 of 36 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION ....................................................................................................... 14 5.1 Test Standard and Limit .................................................................................................... 14 5.2 Test Setup ........................................................................................................................... 14 5.3 Test Procedure ................................................................................................................... 14 5.4 Deviation From Test Standard ......................................................................................... 15 5.5 EUT Operating Mode ........................................................................................................ 15 5.6 Test Data ............................................................................................................................. 15 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 16 6.1 Test Standard and Limit .................................................................................................... 16 6.2 Test Setup ........................................................................................................................... 17 6.3 Test Procedure ................................................................................................................... 18 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data ............................................................................................................................. 19 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 21 7.4 Deviation From Test Standard ......................................................................................... 21 Report No.: TBR-C-202310-0049-66 Page: 3 of 36 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 21 7.6 Test Data ............................................................................................................................. 21 8. BANDWIDTH TEST ................................................................................................................. 22 8.1 Test Standard and Limit .....................................…

Text truncated - open the document above for the full version.

FCC ID: 2BC8T-B1 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2BC8T-B1 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF THE REPORT-----