2BCB7-HDT-04High Power Airborne Transmitter

HDT-04 Transmitter Manual Version V9.9.23 SW V9_1821112829056-02 Accessories included in this manual AVS Airborne Antenna RTC-03 Remote Control Auxiliary Cover HDT-04 3 HDT-04 High Power Transmitter USER’S MANUAL V9.9.23 Contents Chapter 1: Introduction This first chapter provides a general description of the HDT -04 high power transmitter. Chapter 2: Technical features This second part offers the transmitter’s physical and environmental characteristics. Chapter 3: How to order The third part provides the user with information on ordering and different configurations available for these Transmitters. Chapter 4 : Transmitter operation and Menus This fourth part provides the user all the necessary information to control and operate the equipment properly. It is de tailed the function of each button on the keyboard and the information shown on the display, menus, etc. Chapter 5: GPS Application In this chapter, the use of the GPS incorporated system and some of its applications are shown. Chapter 6: Lau-K Application In this chapter, the use of the Lau-k HEVC external encoder operation from the transmitter is explained. Chapter 7: Web Server This chapter provides a detailed description of the Web Server tool. This feature allows controlling the HDT-04 transmitter through a website. Chapter 8: Block Diagram This chapter provides a block diagram of the HDT-04 transmitter internal performance. Chapter 9: Equipment Installation This seventh chapter indicates the available connections of the transmitter and their characteristics. Chapter 10: Remote Control The use of the RTC-01 and RTC-03 device or RS -485 operation provides a remote connection to the HDT-04 transmitter. Chapter 11: Mechanical Dimensions In this chapter, the mechanical drawing of the units described in this manual are included. Chapter 12: Preventive maintenance This chapter explain the procedure that should be followed during the transmitter's life. 4 HDT-04 High Power Transmitter USER’S MANUAL V9.9.23 Chapter 13: Warranty This chapter contains warranty considerations and conditions. Annex A : AVS Airborne Antenna User’s Guide Annex B: Modulation Standards 5 HDT-04 High Power Transmitter USER’S MANUAL V9.9.23 Dear customer, We would like to thank you for selecting this equipment and welcome y ou to the SVP’s growing family of products. We are sure that the addition of this equipment will cause you a complete satisfaction in your existing installation. Please read these instructions carefully and keep them in hand in case you have to refer to them. 6 HDT-04 High Power Transmitter USER’S MANUAL V9.9.23 About this manual This user’s guide provides indications and explanations about how to set up the HDT-04 transmitter easily for the most common use cases. This document is intended to help first time users: - To f ind their way around the GUI. - To understand the different possibilities of the HDT-04 transmitter. - To set the HDT-04 for their specific configurations. Symbols The symbols that appear in this manual are: An information message which indicates explanations for the proper operation of the equipment. This symbol advises users that if they do not take, avoid or make specific actions, several damages could appear in the device. In the places where this symbol appears it means that by pressing the Down button of the equipment the user can access to the next screen. This symbol means that pressing the OK button in the options where this symbol appears, the user can access to the submenu related to that option or can change the value of the parameter. <> These symbols mean that the parameter can be modified in the same screen with the right and left keys. 7 HDT-04 High Power Transmitter USER’S MANUAL V9.9.23 Important Notes 1. The HDT-04 transmitter is completely compatible with the DVB-T /T2 Standards, included in the European Standard ETSI EN300744 (DVB- T), ETSI EN300755 (DVB- T2). 2. It is important that when the transmitter is switched on, the selected RF output connection must have the suitable antenna or must be loaded. 3. The HDT -04 transmitter applies a MPEG-4 compression to either HDMI, composite vide o or SDI input signals. An MPEG-1 layer 2 compression is applied to the corresponding 4 analogue audio channels, the 2 stereo SDI embedded, the HDMI embedded and the AES digital audio signals. The resulting multiplexed signal is transmitted using COFDM modulation system. 4. If the RF output is set to DVB-T2 and the bandwidth selected is 1.7 MHz, then, the device automatically disables the Audio2 and it sets the bitrate of the Audio1 to 128 kbps. 5. Special care should be taken with SDI cables, quality and length , these are very important, especially when HD-SDI or 3G SDI signals are transmitted. 6. If any audio or data channel are not used in a transmission, they should be disabled, in order to assign that bitrate to the video and achieve a higher quality transmitted video signal. 7. Only authorized personnel should open the product and any repair or warranty will be invalidated if the seals are broken. 8. This device has been test under FCC rules only in the frequency range 2,025 - 2,180 MHz and following notes are only applicable to this range: a. This device complies with part 15 of the fcc rules. operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. c. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can rad…

Text truncated - open the document above for the full version.

C/Zubiaurre, 7 bajo 48215 Iurreta (Vizcaya) SPAIN SVP Broadcast Microwave S.L. Tel: + 34 946 203 722 [email protected] www.svpbm.com Date:12 /09/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BCB7-HDT-04 SVP Broadcast Microwave S.L. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

C/Zubiaurre, 7 bajo 48215 Iurreta (Vizcaya) SPAIN SVP Broadcast Microwave S.L. Tel: + 34 946 203 722 [email protected] www.svpbm.com Date:12 /09/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BCB7-HDT-04 SVP Broadcast Microwave S.L. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely,

C/Zubiaurre, 7 bajo 48215 Iurreta (Vizcaya) SPAIN SVP Broadcast Microwave S.L. Tel: + 34 946 203 722 [email protected] www.svpbm.com Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BCB7-HDT-04 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type Schematics Block Diagrams Circuit Description Tuning Procedure Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for 180 days : Exhibit Type External Photos Internal Photos Test Set Up Photos User manual Sincerely,

C/Zubiaurre, 7 bajo 48215 Iurreta (Vizcaya) SPAIN SVP Broadcast Microwave S.L. Tel: + 34 946 203 722 [email protected] www.svpbm.com Date: 07/09/2023 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, FL 32669 SUBJECT: Application(s) for Certification for FCC ID: 2BCB7-HDT-04 To Whom It May Concern: We, the undersigned, hereby authorize Sharon Hoffman at TIMCO ENGINEERING, INC. on our behalf, to apply for certification on our equipment referenced above. Any and all acts carried out by TIMCO ENGINEERING, INC. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

Applicant: SVP Broadcast Microwave S.L. FCC ID: 2BCB7-HDT-04 External photos

C/Zubiaurre, 7 bajo 48215 Iurreta (Vizcaya) SPAIN SVP Broadcast Microwave S.L. Tel: + 34 946 203 722 [email protected] www.svpbm.com HDT-04 Label drawing

1.8 Internal Photos 1.8.1 HDT02_AUX_V9A+ 1.8.2 HDT-02_V9+ 1.8.3 HDT-04-FRONT_V7 1.8.4 PA_V15 1.8.5 KUPA200240_80LIN

Test Report# TR_9248-23_FCC 1.1310/ MPE_ Revision: 3 An IIA Company Te s t Report - FCC Par t 1.1310/ MPE Applicant: SVP Broadcast Microwave S.L. Approved for Release By: Signature: Name & Title: Bruno Clavier, General Manager Date of Signature 1/5/2024 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). This test report relates only to the items tested as identified and is not valid for any subsequent changes or modifications made to the equipment under test. Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 32669 (352) 472-5500 / [email protected] Page 2 of 10 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). Table of Contents 1. APPLICANT INFORMATION ........................................................................................................................................................................... 3 2. LOCATION OF TESTING ................................................................................................................................................................................. 3 2.1 TEST LABORATORY .................................................................................................................................................................................................... 3 2.2 TESTING WAS PERFORMED, REVIEWED BY ................................................................................................................................................................4 3. TEST SAMPLE(S) (EUT/DUT) ........................................................................................................................................................................... 5 3.1 DESCRIPTION OF THE EUT ........................................................................................................................................................................................ 5 4. TEST METHODS & APPLICABLE REGULATORY LIMITS ............................................................................................................................ 6 4.1 TEST METHODS/STANDARDS/GUIDANCE: ............................................................................................................................................................... 6 4.1.1 FCC Limits for Maximum Permissible Exposure (MPE) .................................................................................................................. 6 4.2 EQUATIONS................................................................................................................................................................................................................ 7 5. RF EXPOSURE RESULTS .................................................................................................................................................................................. 8 6. HISTORY OF TEST REPORT CHANGES ........................................................................................................................................................ 9 Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 32669 (352) 472-5500 / [email protected] Page 3 of 10 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). 1. Applicant Information Applicant: SVP Broadcast Microwave S.L. Address: Calle Uralde 6 2ºI Iurreta 48215 Spain 2. Location of Testing 2.1 Test Laboratory Timco Engineering Inc. is a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”). Testing was performed at Timco’s permanent laboratory located at 849 NW State Road 45, Newberry, Florida 32669 FCC test firm # 578780 FCC Designation # US1070 FCC site registration is under A2LA certificate # 0955.01 ISED Canada test site registration # 2056A EU Notified Body # 1177 For all designations see A2LA scope # 0955.01 Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 32669 (352) 472-5500 / [email protected] Page 4 of 10 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). 2.2 Testing was performed, reviewed by Dates of Testing: 08-14-2023 – 9-01-2023 Signature: Name & Title: Tim Royer, EMC Engineer Date of Signature 1/5/2024 Signature: Name & Title: Terri Allen, Project Specialist Date of Signature 1/5/2024 Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 32669 (352) 472-5500 / [email protected] Page 5 of 10 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). 3. Test Sample(s) (EUT/DUT) The test sample was received: 7/27/2023 3.1 Description of the EUT A description as well as unambiguous identification of the EUT(s) tested. Where more than one sample is required for technical reasons (such as the use of connected units for the purpose of conducted output power testing where the product units will have integral antennas), each specific test shall identify which unit was tested. Identification FCC ID: 2BCB7-HDT-04 Brief Description High Power Airborne Transmitter Model(s) # HDT-04 Firmware version N/A Software version N/A Serial Number N/A Technical Characteristics Frequency Range 2025-2180 MHZ RF O/P Power (Max.) 15 W (41.76 dBm) Modulation FM Bandwidth & Emission Class 4.779 MHz Number of Channels 8M00D7W Duty Cycle 100 % Antenna Connector UFL Voltage Rating (AC or Batt.) 28 VDC Antenna Characteristics Antenna Frequency Range Mode / BW Antenna Gain 1 n/a n/a 4.5 dBi - Note: Information such as antenna gain, firmware/software numbers are provided by manufacturer and cannot be validated by the test lab. Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 3…

Text truncated - open the document above for the full version.

Test Report# TR_9248-23_FCC 101_ Revision: 3 An IIA Company Test Report - FCC Par t 101 FM STL & LPAS Applicant: SVP Broadcast Microwave S.L. Approved for Release By: Signature: Name & Title: Bruno Clavier, General Manager Date of Signature 12/21/2023 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). This test report relates only to the items tested as identified and is not valid for any subsequent changes or modifications made to the equipment under test. Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 32669 (352) 472-5500 / [email protected] Page 2 of 22 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). Table of Contents 1. APPLICANT INFORMATION ........................................................................................................................................................................... 3 1.1 PART 101 TEST RESULT SUMMARY ........................................................................................................................................................................... 3 2. LOCATION OF TESTING ................................................................................................................................................................................. 4 2.1 TEST LABORATORY ....................................................................................................................................................................................................4 2.2 TESTING WAS PERFORMED, REVIEWED BY ................................................................................................................................................................4 3. TEST SAMPLE(S) (EUT/DUT) ........................................................................................................................................................................... 5 3.1 DESCRIPTION OF THE EUT ........................................................................................................................................................................................ 5 3.2 CONFIGURATION OF EUT ......................................................................................................................................................................................... 6 3.3 TEST SETUP OF EUT .................................................................................................................................................................................................. 6 4. TEST METHODS & APPLICABLE REGULATORY LIMITS ............................................................................................................................ 7 4.1 TEST METHODS/STANDARDS/GUIDANCE: ............................................................................................................................................................... 7 4.2 APPLIED LIMITS AND REGULATORY LIMITS: .............................................................................................................................................................. 7 5. MEASUREMENT UNCERTAINTY .................................................................................................................................................................... 7 6. ENVIRONMENTAL CONDITIONS ................................................................................................................................................................. 7 6.1 TEMPERATURE & HUMIDITY ...................................................................................................................................................................................... 7 7. LIST OF TEST EQUIPMENT AND TEST FACILITY ........................................................................................................................................ 8 7.1 LIST OF TEST EQUIPMENT ......................................................................................................................................................................................... 8 8. TEST RESULTS ................................................................................................................................................................................................... 9 8.1 RF OUTPUT POWER ................................................................................................................................................................................................ 10 8.1.1 RF Output Power Plot, 2180 MHz ...................................................................................................................................................... 11 8.2 BANDWIDTH & EMISSION ....................................................................................................................................................................................... 12 8.2.1 99% Bandwidth Plot, 2180 MHz......................................................................................................................................................... 13 8.3 EMISSION LIMITATIONS, IN-BAND.......................................................................................................................................................................... 14 8.3.1 Emission Mask, 2180 MHz ................................................................................................................................................................... 15 8.4 EMISSION LIMITATIONS, OUT-OF-BAND ............................................................................................................................................................... 16 8.4.1 Conducted Emissions, Below 1G, 2180 MHz ................................................…

Text truncated - open the document above for the full version.

Test Report# TR_9248-23_FCC 74_ Revision: 3 An IIA Company Test Report - FCC Par t 74 FM STL & LPAS Applicant: SVP Broadcast Microwave S.L. Approved for Release By: Signature: Name & Title: Bruno Clavier, General Manager Date of Signature 12/21/2023 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). This test report relates only to the items tested as identified and is not valid for any subsequent changes or modifications made to the equipment under test. Timco Engineering, Inc., an IIA Company 849 NW State Road 45, Newberry, Florida 32669 (352) 472-5500 / [email protected] Page 2 of 35 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc. (IIA). Table of Contents 1. APPLICANT INFORMATION ........................................................................................................................................................................... 4 1.1 PART 74 TEST RESULT SUMMARY ............................................................................................................................................................................4 2. LOCATION OF TESTING ................................................................................................................................................................................. 5 2.1 TEST LABORATORY .................................................................................................................................................................................................... 5 2.2 TESTING WAS PERFORMED, REVIEWED BY ................................................................................................................................................................ 5 3. TEST SAMPLE(S) (EUT/DUT) ........................................................................................................................................................................... 6 3.1 DESCRIPTION OF THE EUT ........................................................................................................................................................................................ 6 3.2 CONFIGURATION OF EUT ......................................................................................................................................................................................... 7 3.3 TEST SETUP OF EUT .................................................................................................................................................................................................. 7 4. TEST METHODS & APPLICABLE REGULATORY LIMITS ............................................................................................................................ 8 4.1 TEST METHODS/STANDARDS/GUIDANCE: ............................................................................................................................................................... 8 4.2 APPLIED LIMITS AND REGULATORY LIMITS: .............................................................................................................................................................. 8 5. MEASUREMENT UNCERTAINTY .................................................................................................................................................................... 8 6. ENVIRONMENTAL CONDITIONS ................................................................................................................................................................. 8 6.1 TEMPERATURE & HUMIDITY ...................................................................................................................................................................................... 8 7. LIST OF TEST EQUIPMENT AND TEST FACILITY ........................................................................................................................................ 9 7.1 LIST OF TEST EQUIPMENT ......................................................................................................................................................................................... 9 8. TEST RESULTS ................................................................................................................................................................................................. 10 8.1 RF OUTPUT POWER ................................................................................................................................................................................................. 11 8.1.1 RF Output Power Plot, 2025 MHz ...................................................................................................................................................... 12 8.1.2 RF Output Power Plot, 2100 MHz ...................................................................................................................................................... 13 8.1.3 RF Output Power Plot, 2180 MHz ...................................................................................................................................................... 14 8.2 BANDWIDTH & EMISSION ....................................................................................................................................................................................... 15 8.2.1 99% Bandwidth Plot, 2025 MHz ........................................................................................................................................................ 16 8.2.2 99% Bandwidth Plot, 2100 MHz ........................................................................................................................................................ 17 8.2.3 99% Bandwidth Plot, 2180 MHz.............................................................................................…

Text truncated - open the document above for the full version.

ANNEX B – Test Setup Photograph Exhibit 9248-23 Model: HDT-04 FCC ID: 2BCB7-HDT-04 Test Setup / Below 1 GHz Table Setup / Above 1 GHz Radiated Testing, Below 1 GHz Radiated Testing, Below 1 GHz #2 Radiated Testing, Above 1 GHz