2BCDZ-3834314Insert three-ring locking vibrator

[email protected] +1-6264184100 (GMT+8. 9:00 pm - 06:00 am Workday) https://www.facebook.com/Utimitoys +1-6264184100 https://www.utimi.com/ Use it with a condom ATTENTION >> After using Clean & disinfect Clean the product with warm water Dry with clean towel >> Before using >> In the use Water based lube only >> Storage Ventilated place Away from children Avoid the sun Customer service: 12-month limited warranty HOW TO USE 1. Fully charge the product before use. 2. Wear the product in xed position and smear it with some lubes, turn the product on and choose the suitable mode (20 modes in total). 3. Turn o. 1. Cargue completamente el producto antes de utilizarlo. 2. Ponte el producto en posición ja y úntalo con algunos lubricantes, enciende el producto y elige el modo adecuado (20 modos en total). 3. Apáguelo. 1. Caricare completamente il prodotto prima dell'uso. 2. Indossare il prodotto in posizione ssa e spalmarlo con alcuni lubricanti, accendere il prodotto e scegliere la modalità adatta (20 modalità in totale). 3. Spegnere. 1. 2. 20 3. 1. Laden Sie das Produkt vor dem Gebrauch vollständig auf. 2. Tragen Sie das Produkt in einer festen Position und schmieren Sie es mit etwas Gleitmittel ein, schalten Sie das Produkt ein und wählen Sie den passenden Modus (insgesamt 20 Modi). 3. Schalten Sie es aus. 1. Chargez complètement le produit avant de l'utiliser. 2. Portez le produit en position xe et enduisez-le de quelques lubriants, allumez le produit et choisissez le mode approprié (20 modes au total). 3. Éteignez le produit. Notice: The distance between the cock ring and the remote control can't be over 10m. INSTRUCTION OF BUTTON G-spot Switch/Frequency Button (remote control) * After the cock ring startup, short press this button to turn on the G-spot motor, and long press it for 1.5s to turn o the motor. * After the cock ring and G-spot motor startup, every short press of this button will change a vibration mode. (10 modes in total) Switch/Frequency Button (cock ring) * Long press this button for about 2 seconds to turn it on or o. * After startup, every short press of this button will change a vibration mode. C-spot Switch/Frequency Button (remote control) * After the cock ring startup, short press this button to turn on the C-spot motor, and long press it for 1.5s to turn o the motor. * After the cock ring and C-spot motor startup, every short press of this button will change a vibration mode. (10 modes in total) * 2ON/OFF * * C 1.5 * C-spot (10 * G ON1.5OFF * G (10) SPECIFICATION Material: ABS & silicone Water resistance: daily waterproof (not immerse the remote control in water) Charging time: about 1.5h Working time: about 1.2h Charging indicator: shows red ash Fully charged indicator: stays in red Starting up: stays in red Low battery: shows red ash Size: (main body) 3.9"*3.7"*1.8"/10*9.5*4.5cm; insertable length 3"/7.5cm; (front ring) inner diameter 1.1"/2.8cm; (back ring) larger 1.7"*1.3"/4.3*3.4cm, smaller 1.4"*0.8"/3.4*2cm Weight: 3.6oz/100g Package list: 1* cock ring; 1* remote control; 1* USB cable; 1* user manual; 1* storage bag Material: ABS & silicona Resistencia al agua: resistencia diaria al agua (no sumergir el mando en agua) Tiempo de carga: aproximadamente 1,5 horas Tiempo de funcionamiento: aproximadamente 1,2 horas Indicador de carga: parpadea en rojo Indicador de carga completa: permanece en rojo Puesta en marcha: permanece en rojo Batería baja: parpadea en rojo Tamaño: (cuerpo principal) 3.9"*3.7"*1.8"/10*9.5*4.5cm; longitud insertable 3"/7.5cm; (anillo frontal) diámetro interior 1.1"/2.8cm; (anillo trasero) más grande 1.7"*1.3"/4.3*3.4cm, más pequeño 1.4"*0.8"/3.4*2cm Peso: 3.6oz/100g Lista de paquetes: 1* anillo para el pene; 1* mando a distancia; 1* cable USB; 1* manual de usuario; 1* bolsa de almacenamiento Materiale: ABS & silicone Resistenza all'acqua: quotidianamente impermeabile (non immergere il telecomando in acqua) Tempo di ricarica: circa 1,5h Tempo di lavoro: circa 1,2h Indicatore di carica: mostra un ash rosso Indicatore di carica completa: rimane in rosso Avvio: rimane in rosso Batteria scarica: mostra un ash rosso Dimensioni: (corpo principale) 3,9"*3,7"*1,8"/10*9,5*4,5cm; lunghezza inseribile 3"/7,5cm; (anello anteriore) diametro interno 1,1"/2,8cm; (anello posteriore) più grande 1,7"*1,3"/4,3*3,4cm, più piccolo 1,4"*0,8"/3,4*2cm Peso: 3.6oz/100g Elenco dei pacchetti: 1* cock ring; 1* telecomando; 1* cavo USB; 1* manuale d'uso; 1* sacchetto di stoccaggio Material: ABS & Silikon Wasserbeständigkeit: täglich wasserdicht (die Fernbedienung darf nicht in Wasser getaucht werden) Auadezeit: ca. 1,5h Arbeitszeit: ca. 1.2h Ladeanzeige: zeigt roten Blitz Anzeige für volle Ladung: leuchtet rot Einschalten: leuchtet rot Niedriger Batteriestand: zeigt roten Blitz Größe: (Hauptkörper) 3.9"*3.7"*1.8"/10*9.5*4.5cm; einführbare Länge 3"/7.5cm; (vorderer Ring) Innendurch- messer 1.1"/2.8cm; (hinterer Ring) größer 1.7"*1.3"/4.3*3.4cm, kleiner 1.4"*0.8"/3.4*2cm Gewicht: 3.6oz/100g Paket-Liste: 1* Cockring; 1* Fernbedienung; 1* USB-Kabel; 1* Benutzerhandbuch; 1* Aufbewahrungstasche Matériau : ABS & silicone Résistance à l'eau : étanchéité quotidienne (ne pas immerger la télécommande dans l'eau) Temps de chargement : environ 1,5h Temps de travail : environ 1,2h Indicateur de charge : clignote en rouge Indicateur de charge complète : reste en rouge Démarrage : reste en rouge Batterie faible : clignote en rouge Taille : (corps principal) 10*9,5*4,5 cm ; longueur d'insertion 7,5 cm ; diamètre intérieur de l'anneau avant 2,8 cm ; anneau arrière plus grand 4,3*3,4 cm, plus petit 3,4*2 cm Poids : 3.6oz/100g Liste de paquet : 1* anneau de bite, 1* télécommande, 1* câble USB, 1* manuel d'utilisation, 1* sac de rangement ACHTUNG Reinigen und Desinzieren Nur auf Wasserbasis Verwenden Sie es mit einem Kondom Reinigen Sie dasProdukt mit warmem Wasser Trocknen Sie mit sauberem Handtuch Kundendienst: 12 Monate eingeschränkte Garantie. Belüfteter Platz Von Kindern fer…

Text truncated - open the document above for the full version.

(Shenzhen Unistyle Technology Co., Ltd.) (2024.4.2) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BCDZ-3834314) [Shenzhen Unistyle Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Kim Nengying (Shenzhen Unistyle Technology Co., Ltd.) (2024.4.2) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BCDZ-3834314) [Shenzhen Unistyle Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Kim Nengying

Shenzhen Unistyle Technology Co., Ltd. 2024.4.2 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Kim Nengying / Manager Contact information / address: 1-5C Lijinguoji, Baoan Qu, Shenzhen, Guangdong, China

Shenzhen Unistyle Technology Co., Ltd. 2024.4.2 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Insert three-ring locking vibrator Trademark: UTIMI MODEL: 3834314, 3841668, 3841673, 3864359, 3864004, 3864006, 3864008, 3865002, 3865004, 3865006 FCC ID: 2BCDZ-3834314 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Kim Nengying / Manager Contact information / address: 1-5C Lijinguoji, Baoan Qu, Shenzhen, Guangdong, China

Shenzhen Unistyle Technology Co., Ltd. Model Difference 2024/4/2 EUT NAME: Insert three-ring locking vibrator Trademark: UTIMI MODEL: 3834314 3841668, 3841673, 3864359, 3864004, 3864006, 3864008, 3865002, 3865004, 3865006 FCC ID: 2BCDZ-3834314 All the models are the same circuit and RF module, except model number and appearance color. Regards Sincerely Client’s signature: Client’s name / title : Kim Nengying / Manager Contact information / address: 1-5C Lijinguoji, Baoan Qu, Shenzhen, Guangdong, China

External Photos

Label & label location 5mm*10mm FCC ID: 2BCDZ-3834314

Internal Photos Antenna

RF EXPOSURE EVALUATION METHOD FCC ID: 2BCDZ-3834314 Applicable standard： In accordance with FCC 47 CFR part 2 (2.1093) this device has been defined as a portable device which is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable devices must be evaluated using the specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEEC95.1-1992. and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2003. Per FCC KDB 447498 D01 v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances s 50 mm are determined by: SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Frequency Reading result Conducted Output Power (dBμV/m) dBm 433.92MHz 61.67 -30.53 Note: Conducted Output Power (dBm)= Reading result(dBμV/m)-95.2 max possible output power (PK,conducted)：-30±1dBm -29dBm=0.001259mW 433.92MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 0.001259/5*√0.43392=0.000166≤3.0 Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required.

PCB Antenna Frequency：433.92MHZ Item Specification Model Name PCB-Antenna Center Frequency 433.92MHz 0 dbi MAX.GAIN 0 dbi Polarization Linear,Vertical Azimuth Beam Pattern 0mni directional Impedance 50Ω Antenna Length 52mm Manufacture Shenzhen Unistyle Technology Co., Ltd. PCB Antenna： Long=52mm

No.：BCTC/RF-EMC-005 Page: 1 of 29 Edition：B.1 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2403388917E Applicant: Shenzhen Unistyle Technology Co., Ltd. Product Name: Insert three-ring locking vibrator Test Model: 3834314 Tested Date: 2024-03-14 to 2024-03-25 Issued Date: 2024-03-25 Report No.: BCTC2403388917E No.：BCTC/RF-EMC-005 Page: 2 of 29 Edition：B.1 FCC ID: 2BCDZ-3834314 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Insert three-ring locking vibrator Trademark: utimi Model/Type Reference: 3834314 3841668, 3841673, 3864359, 3864004, 3864006, 3864008, 3865002, 3865004, 3865006 Prepared For: Shenzhen Unistyle Technology Co., Ltd. Address: 1-5C Lijinguoji, Baoan Qu Shenzhen Guangdong, China Manufacturer: Shenzhen Hiyi Technology Co., Ltd Address: Building 201, Building 1, No. 82900231201, No. 357 Xinhu Road, Niuhu Community, Guanlan Street, Longhua District, Shenzhen Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-03-14 Sample Tested Date: 2024-03-14 to 2024-03-25 Issue Date: 2024-03-25 Report No.: BCTC2403388917E Test Standards: FCC Part15.231 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2403388917E No.：BCTC/RF-EMC-005 Page: 3 of 29 Edition：B.1 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Test Setup Configuration ...................................................................................... 7 4.3 Support Equipment ............................................................................................... 8 4.4 Channel List .......................................................................................................... 8 4.5 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 10 6.1 Block Diagram Of Test Setup .............................................................................. 10 6.2 Limit .................................................................................................................... 10 6.3 Test Procedure ................................................................................................... 10 6.4 EUT Operating Conditions .................................................................................. 10 6.5 Test Result .......................................................................................................... 10 7. Radiated Emissions ............................................................................................. 11 7.1 Block Diagram Of Test Setup .............................................................................. 11 7.2 Limit .................................................................................................................... 12 7.3 Test Procedure ................................................................................................... 13 7.4 EUT Operating Conditions .................................................................................. 14 7.5 Test Result .......................................................................................................... 15 8. Bandwidth Test .................................................................................................... 19 8.1 Block Diagram Of Test Setup .............................................................................. 19 8.2 Limit .................................................................................................................... 19 8.3 Test Procedure ................................................................................................... 19 8.4 EUT Operating Conditions .................................................................................. 19 8.5 Test Result .......................................................................................................... 20 9. Calculation Of Average Factor ............................................................................ 21 10. Dwell Time........................................................................................................... 24 10.1 Block Diagram Of Test Setup ............................................................................ 24 10.2 Limit .................................................................................................................. 24 10.3 Test Procedure ......................................................................................…

Text truncated - open the document above for the full version.

Radiated Measurement Photos