2BCI2-CF2071BTBluetooth Scale

FitGo - ldeas for health Health & fitness User Guide For First Use Users can set their own target weight to customize their own health plan. Target weight Attention Mobile&Device IOS 7.0 Android 4.3 Bluetooth 4.0 1. Battery lnstallation Open the battery door, put into batteries with correct polarity. 2. App Installation Scan the QR code on the above, or download “FitGo” from App Store or Android Google Play. 3. Registration Turn on bluetooth on mobile device, run the App“FitGo”, follow the App instructions. iOS AppAndroid App 8 users share one user account in the device. Multi UsersFCC Warning One-click sync with Apple Health 12 parameters in 1 measurment Body Fat MuscleWaterWeightBMIBone V-Fat AGEProteinBMRObesityLBW 1.Do not use the scale on people who have body implants such as a pacemaker, artificial limbs, contraceptive devices, or metal plates or screws. It may cause the device to malfunction or produce aninaccurate result. When in doubt, consult your physician. 2. Please make sure good contact between bare feet and the metal electrodes, otherwise it will display your weight only. 3. Ensure the scale is on a flat, even and firm surface. Avoid carpet or soft surfaces. 4. The surface of the scale will be slippery if wet. Please make sure both the glass and your feet are dry before use. 5. This scale is not water proof. Do not expose to moisture. 6. Clean the scale with a slightly damp cloth. DO not use any chemical/abrasive cleaning agents to clean the scale. 7. Please remove the batteries, if the scale is not to being used for a long time. 8. The appliance is intended solely for domestic use within the home. 9. Children should be supervised to ensure that they do not play with the appliance. 10. When weighing for the first time, there is a big difference in weight reading. The electronic scale will be automatically adjusted when it is used for the first time or after being moved. The weighed data includes the weight of the product itself, and accurate data can be obtained by weighing again. 11. Why are the weighing data different on different grounds? Because of the highly sensitive sensor systems of electronic scales, weighing needs to be placed on a flat and firm surface (such as uneven ground or placed on a carpet or foam floor mat will cause the weighing data to be inaccurate) 12. Reasons for inconsistent weighing data Unsteady posture: body shaking, etc. make it difficult to lock the data during weighing. It is recom- mended to stand steadily in the center of the electronic scale Ground factor: If the ground is uneven or placed on an unstable surface such as a carpet, foam pad, etc., the weighing data will be incorrect. An important point - It is recommended to stand steadily in the center of the electronic scale. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2BCI2-CF2071BT Bluetooth Scale

Oasis Compliance, Inc. CFR47§2.911(d)(7)FCCUSAgentLetterofAttestation Date:09-13-2023 FCCID:2BCI2-CF2071BT To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ToWhomItMayConcern, ThisletteristoconfirmthatwehaveacceptedtheresponsibilitytoactasUSAgentonbehalf of ZhongshanCannyElectronicsCo.,Ltd (“theapplicant”)fortheabovereferencedFCCID. Weareawareoftherequirementsandresponsibilitiesoftheapplicant’sagentforserviceof processasoutlinedintheFCCsection2.911(d)(7)andReportandOrderFCC22-84paragraph 63. U.S.AgentInformation: OasisCompliance,Inc. FRN:0033464157 JamesHe 3313VerdiDr,SanJose,CA95111 Cell:2026028330 Sincerelyyours, JamesHe GlobalMarketAccessManager OasisCompliance,Inc. Email:[email protected]

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Zhongshan Canny Electronics Co., Ltd Grantee code: 2BCI2 FCC ID: 2BCI2-CF2071BT Contact Name: Amilly Tang Address: Floor 2&3, Building 1, No.15 Huanmao 1 road, Torch development zone, Zhongshan, Guangdong, China Telephone No: +86-0760-85337631 Fax No: 0760-87600682 Email: [email protected] i. [Zhongshan Canny Electronics Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ Zhongshan Canny Electronics Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Zhongshan Canny Electronics Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 9.18.2023 Applicant’s Name: Amilly Tang Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Zhongshan Canny Electronics Co., Ltd Product Similarity Declaration Product name: Bluetooth Scale Model name: CF2071BT, CF570BT, CK652BT, CF370BT, CF372BT, CF375BT, CF470BT, CF472BT, CF473BT, CF573BT, CF575BT, CF579BT, CF770BT, CF771BT, CF772BT, CF773BT, CF775BT, CF871BT, CF2070BT, CF2072BT, CK2151BT, CK2152BT, CK2250BT, CK650BT, CF970BT, CK2352BT, CK2353BT, CF2371BT, CF2372BT, CB301BT, CB502BT, CK2550BT, CK2551BT, CK2552BT, CK2553BT, CK2450BT, CK2451BT, CK2452BT, CK2453BT, CF2470BT, CF2471BT, CF2472BT, CF2473BT, CF2570BT, CF2571BT, CF2572BT, CF2573BT, CK2255BT FCC ID: 2BCI2-CF2071BT We (Zhongshan Canny Electronics Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model No and color. Demonstrate the detail(descriptions and pictures) as to the difference list above. Signature: Name: Amilly Tang Title: Manager Date: 9.18.2023

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Zhongshan Canny Electronics Co., Ltd Address: Floor 2&3, Building 1, No.15 Huanmao 1 road, Torch development zone, Zhongshan, Guangdong, China Product Name: Bluetooth Scale Model Number: CF2071BT, CF570BT, CK652BT, CF370BT, CF372BT, CF375BT, CF470BT, CF472BT, CF473BT, CF573BT, CF575BT, CF579BT, CF770BT, CF771BT, CF772BT, CF773BT, CF775BT, CF871BT, CF2070BT, CF2072BT, CK2151BT, CK2152BT, CK2250BT, CK650BT, CF970BT, CK2352BT, CK2353BT, CF2371BT, CF2372BT, CB301BT, CB502BT, CK2550BT, CK2551BT, CK2552BT, CK2553BT, CK2450BT, CK2451BT, CK2452BT, CK2453BT, CF2470BT, CF2471BT, CF2472BT, CF2473BT, CF2570BT, CF2571BT, CF2572BT, CF2573BT, CK2255BT FCC Identifier: 2BCI2-CF2071BT We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Amilly Tang Date: 9/18/2023 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Zhongshan Canny Electronics Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 9/18/2023 Subject: Request for Confidentiality FCC ID: 2BCI2-CF2071BT To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Amilly Tang Title: Manager

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (External Photos) Model: CF2071BT Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

Label Location

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: CF2071BT Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] ANT Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi230808013-01E2 Date of issue: 2023-09-11 Applicant: Zhongshan Canny Electronics Co., Ltd Product: Bluetooth Scale Model(s): CF2071BT, CF570BT, CK652BT, CF370BT, CF372BT, CF375BT, CF470BT, CF472BT, CF473BT, CF573BT, CF575BT, CF579BT, CF770BT, CF771BT, CF772BT, CF773BT, CF775BT, CF871BT, CF2070BT, CF2072BT, CK2151BT, CK2152BT, CK2250BT, CK650BT, CF970BT, CK2352BT, CK2353BT, CF2371BT, CF2372BT, CB301BT, CB502BT, CK2550BT, CK2551BT, CK2552BT, CK2553BT, CK2450BT, CK2451BT, CK2452BT, CK2453BT, CF2470BT, CF2471BT, CF2472BT, CF2473BT, CF2570BT, CF2571BT, CF2572BT, CF2573BT, CK2255BT FCC ID: 2BCI2-CF2071BT Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 6- Report No.: MTi230808013-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 6- Report No.: MTi230808013-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Applicant: Zhongshan Canny Electronics Co., Ltd Address: Floor 2&3, Building 1, No.15 Huanmao 1 road, Torch development zone, Zhongshan, Guangdong, China Manufacturer: Zhongshan Canny Electronics Co., Ltd Address: Floor 2&3, Building 1, No.15 Huanmao 1 road, Torch development zone, Zhongshan, Guangdong, China Factory: Zhongshan Canny Electronics Co., Ltd Address: Floor 2&3, Building 1, No.15 Huanmao 1 road, Torch development zone, Zhongshan, Guangdong, China Product description Product name: Bluetooth Scale Trademark: N/A Model name: CF2071BT Serial Model: CF570BT, CK652BT, CF370BT, CF372BT, CF375BT, CF470BT, CF472BT, CF473BT, CF573BT, CF575BT, CF579BT, CF770BT, CF771BT, CF772BT, CF773BT, CF775BT, CF871BT, CF2070BT, CF2072BT, CK2151BT, CK2152BT, CK2250BT, CK650BT, CF970BT, CK2352BT, CK2353BT, CF2371BT, CF2372BT, CB301BT, CB502BT, CK2550BT, CK2551BT, CK2552BT, CK2553BT, CK2450BT, CK2451BT, CK2452BT, CK2453BT, CF2470BT, CF2471BT, CF2472BT, CF2473BT, CF2570BT, CF2571BT, CF2572BT, CF2573BT, CK2255BT Standards: N/A Test method: KDB 447498 D01 v06 Date of Test Date of test: 2023-08-11 to 2023-09-12 Test result: Pass Test Engineer : (Maleah Deng) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) - Page 4 of 6- Report No.: MTi230808013-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of Contents 1. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ............................................................................................ 5 2. SAR TEST EXCLUCSION THRESHOLDS ........................................................................................................................ 6 - Page 5 of 6- Report No.: MTi230808013-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions. a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3…

Text truncated - open the document above for the full version.

Page15of18CONFIDENTIAL 3.7ANTENNASPECIFICATION: 3.7.1RETURNLOSS BW(RL<10dB)：90 MHz CONFIDENTIAL FOR Miuix Page16of18CONFIDENTIAL 3.7.2PCBANTENNARADIATIONPATTERNS CONFIDENTIAL FOR Miuix

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi230808013-01E1 Date of issue: 2023-09-11 Applicant: Zhongshan Canny Electronics Co., Ltd Product: Bluetooth Scale Model(s): CF2071BT, CF570BT, CK652BT, CF370BT, CF372BT, CF375BT, CF470BT, CF472BT, CF473BT, CF573BT, CF575BT, CF579BT, CF770BT, CF771BT, CF772BT, CF773BT, CF775BT, CF871BT, CF2070BT, CF2072BT, CK2151BT, CK2152BT, CK2250BT, CK650BT, CF970BT, CK2352BT, CK2353BT, CF2371BT, CF2372BT, CB301BT, CB502BT, CK2550BT, CK2551BT, CK2552BT, CK2553BT, CK2450BT, CK2451BT, CK2452BT, CK2453BT, CF2470BT, CF2471BT, CF2472BT, CF2473BT, CF2570BT, CF2571BT, CF2572BT, CF2573BT, CK2255BT FCC ID: 2BCI2-CF2071BT Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 45 Report No.: MTi230808013-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 45 Report No.: MTi230808013-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 7 1.4 Description of support units ....................................................................................................................... 7 1.5 Measurement uncertainty .......................................................................................................................... 7 2 Summary of Test Result .................................................................................................................. 8 3 Test Facilities and accreditations ................................................................................................... 9 3.1 Test laboratory ........................................................................................................................................... 9 4 List of test equipment .................................................................................................................... 10 5 Evaluation Results (Evaluation) .................................................................................................... 11 5.1 Antenna requirement ............................................................................................................................... 11 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 11 6.1 Conducted Emission at AC power line .................................................................................................... 11 6.2 Occupied Bandwidth ................................................................................................................................ 12 6.3 Maximum Conducted Output Power ........................................................................................................ 13 6.4 Power Spectral Density ........................................................................................................................... 14 6.5 RF conducted spurious emissions and band edge measurement .......................................................... 15 6.6 Band edge emissions (Radiated) ............................................................................................................ 16 6.7 Radiated emissions (below 1GHz) .......................................................................................................... 21 6.8 Radiated emissions (above 1GHz) .......................................................................................................... 25 Photographs of the test setup ............................................................................................................. 32 Photographs of the EUT....................................................................................................................... 33 Appendix A: DTS Bandwidth ............................................................................................................... 34 Appendix B: Maximum conducted output power ............................................................................... 36 Appendix C: Maximum power spectral density .................................................................................. 38 Appendix D: Band edge measurements .....................................…

Text truncated - open the document above for the full version.

Page 1 of 1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the test setup Model: CF2071BT Radiated emissions (below 1GHz) Radiated emissions (above 1GHz)