2BCK8-V6Handheld Camera

Handheld Recorder V6 Instructions for Use Please be sure to read this instruction manual carefully before using this product. The contents of this manual are for reference only; please follow the actual product for specific operations. I.Product structure Description of product 1) Lens 2) Infrared lamp 3) Rotating column 4)Speaker 5) Back shoulder clip 6) Up key 7)OK key 8) Down key 9) Microphone hole 10) Reset key 11) Power button 12) Mode/menu key 13) TF card slot 14) Charging interface II.Introduction to buttons and interface functions 1. Power button Long press to turn on/off; 2. Mode/menu key 1）Click to switch the video recording, photo, recording and playback interface; 2）Long press to open the menu and click the exit menu. 3. OK key 1) Confirmation key; 2) Click to record/take photos/record; 3) When viewing video and recording files on the playback interface, click to play or pause. 4. Up key 1) Up selection key; 2) When taking photos and recording videos, click to reduce the focal length; 3) Click to switch the previous file in playback mode. 5. Down key 1) Down selection key; 2) When taking photos and recording videos, click to enlarge the focal length, and long press to turn on or off the infrared light; 3) Click to switch to the next file in the playback mode. 6. Recall button When the machine has a flower screen, abnormal shutdown, etc., you can force the shutdown by poking it with a pinhole-shaped thing. 7. USB interface 1）Interface type:Type-C; 2）It is used to connect an external power supply to charge the battery or provide working power; 3) Used to connect PC The terminal can perform the 'memory/video mode' operation. III.Basic operating instructions 1. Power on and shut down Long press'Power button'2 seconds to turn on or off the device. 2. Video recording mode 1)Long press the 'Power button' in the shutdown state to turn on the device and enter the video mode; 2) Click the 'OK key' to record the video, click again to stop the video recording and save it; (the rotating column can be rotated to adjust the lens); 3) Click the 'up/down key' to reduce/enlarge the focal length, and long press the 'down key' to turn on/off the infrared light; 4) Click 'Mode/Menu Key' to switch the mode; long press to change the system settings menu. 3. Photo mode 1)Long press the 'Power button' in the shutdown state to turn on the device and click 'mode/menu key' to enter the photo mode; 2) Click the 'OK key' to take photos; (the rotating column can be rotated to adjust the lens); 3) Click the 'up/down key' to reduce/enlarge the focal length, and long press the 'down key' to turn on/off the infrared light; 4) Click 'Mode/Menu Key' to switch the mode; long press to change the system settings menu. 4. Recording mode 1)Long press the 'Power button' in the shutdown state to turn on the device and click the mode/menu key' twice to enter the recording mode.; 2) Click the 'OK key' to record, and click again to stop recording and save; 3) Click 'Mode/Menu Key' to switch the mode; long press to set the system settings menu. 5. Replay mode 1)Long press the 'Power button' in the shutdown state to turn on the device, click 'mode/menu key' three times to enter the recording file, and click four times to enter the photo/video file; 2) Click the 'up/down key' to switch files; 3) Click the 'OK key' to play the video/recording file; 4) Click the 'mode/menu key' to switch the mode; long press to click the 'Delete' menu. 6. USB mode The device connects to the computer via a USB data connection. After the device is automatically powered on, two options are displayed on the screen: "Memory Mode" and "Video Mode". Memory Mode: Functions such as photographing, video recording, file access, and checking can be performed in this mode. Video Mode: It is only used for the computer to supply power to the device. 7. WiFi mode 1)Turn on WiFi:Long press the 'mode/menu key' to find 'wifi' and select 'on' to turn on WiFi; 2)Install and use WiFi: Before turning on the WiFi function, please download and install it on your smartphone.'Recorder' Application.Take notice of: Android,Please scan the QR code prompted in the device, or scan the QR code below; ios: canIn the Apple StoreSearch for 'wind recorder' to download. ULZ 000105 Connection steps: Connection steps: 1）After the device is turned on, find 'WiFi' in the settings menu to turn on the wifi, and the screen will show the wifi name and password of the device indicating that the wifi has been turned on; 2) Click the downloaded APP, find "Add Device" - enter the wifi settings to find the wifi name displayed by the device and enter the password to connect successfully. 3)Turn off WiFi:After turning on the WiFi function, click the 'mode/menu key' to confirm the shutdown according to the prompts. Note: It is forbidden to unplug and insert the card when the equipment is working! FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of…

Text truncated - open the document above for the full version.

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BCK8-V6 V6 We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. iv. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of Contact Applicant/Approval Holder Signature Date: 2025-9-1 Signature Date: 2025-9-1 Company Name: GLOCERTS TECHNOLOGY INC Shenzhen Hongkang Shengda Technology Co., LTD FRN: 0036339737 0034153825 Contact Name: Huiying Fan huaping yang Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 303, Building A, No.7, Lanqing 1st Road, Luhu Community, Guanhu Street, Longhua District, Shenzhen, Guangdong Province, China Phone: (626) 588-8039 +86-13828852415 Email: [email protected] [email protected]

Page1of2FCCID: 2BCK8-V6 Externalphotos Page2of2FCCID: 2BCK8-V6

FCCID:2BCK8-V6

Page1of4FCCID: 2BCK8-V6 Internalphotos Page2of4FCCID: 2BCK8-V6 WIFIANT Page3of4FCCID: 2BCK8-V6 Page4of4FCCID: 2BCK8-V6

Page 1 of 7 Report No.: AiTSZ-250820046FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. RF Exposure evaluation Product Name : Handheld Camera Brand Name : N/A Model : V6 Series Model : N/A FCC ID : 2BCK8-V6 Applicant : Shenzhen Hongkang Shengda Technology Co., LTD Address : 303, Building A, No.7, Lanqing 1st Road, Luhu Community, Guanhu Street, Longhua District, Shenzhen, Guangdong Province Manufacturer : Shenzhen Hongkang Shengda Technology Co., LTD Address : 303, Building A, No.7, Lanqing 1st Road, Luhu Community, Guanhu Street, Longhua District, Shenzhen, Guangdong Province Standard(s) : 47CFR §1.1310, 47CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 Date of Receipt : Aug. 20, 2025 Date of Test : Aug. 20, 2025~ Aug. 28, 2025 Issued Date : Aug. 28, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 7 Report No.: AiTSZ-250820046FW2 Report Revise Record Report Version Issued Date Notes M1 Aug. 28, 2025 Initial Release Page 3 of 7 Report No.: AiTSZ-250820046FW2 Contents 1 GENERAL INFORMATION .......................................................................................................................................... 4 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 4 1.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 METHOD OF MEASUREMENT ................................................................................................................................... 6 2.1 APPLICABLE STANDARD.................................................................................................................................................. 6 2.2 EVALUATION METHOD AND LIMIT .................................................................................................................................... 6 2.3 MANUFACTURING TOLERANCE ........................................................................................................................................ 7 2.4 EVALUATION RESULT ..................................................................................................................................................... 7 2.5 CONCLUSION ............................................................................................................................................................... 7 Page 4 of 7 Report No.: AiTSZ-250820046FW2 1 GENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.2 General Description of EUT Product Name: Handheld Camera Model/Type reference: V6 Serial Model: N/A Rating: Input: DC5V DC 3.7V 400mAh 1.48Wh From Battery Hardware Version: N/A Software Version: N/A Sample(s) Status: AiTSZ-250806063-1(Normal sample) AiTSZ-250806063-2(Engineer sample) 2.4G WIFI: Supported type: 802.11b/802.11g /802.11n(HT20)/802.11n(HT40) Modulation: 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM Operation frequency: 802.11b/802.11g/802.11n(H20): 2412MHz~2462MHz 802.11n(H40): 2422MHz~2452MHz Channel number: 802.11b/802.11g/802.11n(H20): 11 802.11n(H40): 7 Channel separation: 5MHz Antenna type: PCB antenna Antenna gain: 0.41 dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual.. Page 5 of 7 Report No.: AiTSZ-250820046FW2 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 251906 Designation Number: CN1376 Guangdong Asia Hongke Test Technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC —Registration No.: 31737 CAB identifier: CN0165 The 3m Semi-anechoic chamber of Guangdong Asia Hongke Test Technology Limited has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 31737 A2LA-Lab Cert. No.: 7133.01 Guangdong Asia Hongke Test Technology Limited …

Text truncated - open the document above for the full version.

Page 1 of 32 Report No.: AiTSZ-250820046FW1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : Handheld Camera Brand Name : N/A Model : V6 Series Model : N/A FCC ID : 2BCK8-V6 Applicant : Shenzhen Hongkang Shengda Technology Co., LTD Address : 303, Building A, No.7, Lanqing 1st Road, Luhu Community, Guanhu Street, Longhua District, Shenzhen, Guangdong Province Manufacturer : Shenzhen Hongkang Shengda Technology Co., LTD Address : 303, Building A, No.7, Lanqing 1st Road, Luhu Community, Guanhu Street, Longhua District, Shenzhen, Guangdong Province Standard(s) : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Receipt : Aug. 20, 2025 Date of Test : Aug. 20, 2025~ Aug. 28, 2025 Issued Date : Aug. 28, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 32 Report No.: AiTSZ-250820046FW1 Report Revise Record Report Version Issued Date Notes M1 Aug. 28, 2025 Initial Release Page 3 of 32 Report No.: AiTSZ-250820046FW1 Contents 1 TEST SUMMARY ....................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENERAL INFORMATION .......................................................................................................................................... 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 8 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 8 3 TEST CONDITIONS AND RESULTS ............................................................................................................................ 10 3.1 CONDUCTED EMISSIONS TEST ....................................................................................................................................... 10 3.2 RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... 13 3.3 MAXIMUM PEAK CONDUCTED OUTPUT POWER ............................................................................................................... 20 3.4 POWER SPECTRAL DENSITY .......................................................................................................................................... 21 3.5 6DB BANDWIDTH ....................................................................................................................................................... 22 3.6 OUT-OF-BAND EMISSIONS ........................................................................................................................................... 23 3.7 ANTENNA REQUIREMENT ............................................................................................................................................. 25 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 26 5 PHOTOS OF EUT ..................................................................................................................................................... 27 Page 4 of 32 Report No.: AiTSZ-250820046FW1 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 15.247 Meas Guidance v05r02: Guidance for Compliance Measurements on Dig…

Text truncated - open the document above for the full version.

Antenna Specification 专业的4G/3G/GPS/WIFI等天线方案设计及供应商 1 Shenzhen Shundacheng Technology Co., Ltd. Room 401A, Xinfu Industrial Park, Chongqing Road, Heping Community, Fuhai Subdistrict, Bao'an District, Shenzhen City Test system 2 天线电路 3 效率&增益 4 5 6

Page 1 of 15 Report No.: AiTSZ-250820046FW1 Maximum Peak Conducted Output Power Test Result Maximum Peak Conducted Output Power Mode Channel Ant. 0 (dBm) Total (dBm) Limit (dBm) Result IEEE 802.11b 1 8.30 N/A ≤30 PASS 6 8.26 N/A ≤30 PASS 11 8.05 N/A ≤30 PASS IEEE 802.11g 1 8.78 N/A ≤30 PASS 6 8.79 N/A ≤30 PASS 11 8.54 N/A ≤30 PASS IEEE 802.11n_20 1 8.70 N/A ≤30 PASS 6 8.66 N/A ≤30 PASS 11 8.46 N/A ≤30 PASS IEEE 802.11n_40 3 8.92 N/A ≤30 PASS 6 8.81 N/A ≤30 PASS 9 8.76 N/A ≤30 PASS Page 2 of 15 Report No.: AiTSZ-250820046FW1 99% Bandwidth Test Result Mode Channel Ant. Center Frequency (MHz) 99% BW (MHz) IEEE 802.11b 1 0 2412 11.339 6 2437 11.959 11 2462 11.609 IEEE 802.11g 1 2412 16.629 6 2437 16.640 11 2462 16.705 IEEE 802.11n_20 1 2412 17.677 6 2437 17.378 11 2462 17.665 IEEE 802.11n_40 3 2422 35.840 6 2437 35.470 9 2452 36.341 Test Graphs IEEE 802.11b_Channel 1_20MHz_Antenna 0 IEEE 802.11b_Channel 6_20MHz_Antenna 0 IEEE 802.11b_Channel 11_20MHz_Antenna 0 IEEE 802.11g_Channel 1_20MHz_Antenna 0 Page 3 of 15 Report No.: AiTSZ-250820046FW1 IEEE 802.11g_Channel 6_20MHz_Antenna 0 IEEE 802.11g_Channel 11_20MHz_Antenna 0 IEEE 802.11n_Channel 1_20MHz_Antenna 0 IEEE 802.11n_Channel 6_20MHz_Antenna 0 IEEE 802.11n_Channel 11_20MHz_Antenna 0 IEEE 802.11n_Channel 3_40MHz_Antenna 0 IEEE 802.11n_Channel 6_40MHz_Antenna 0 IEEE 802.11n_Channel 9_40MHz_Antenna 0 Page 4 of 15 Report No.: AiTSZ-250820046FW1 6dB Bandwidth Test Result Mode Channel Ant. Center Frequency (MHz) 6 dB Bandwidth (MHz) Limit (MHz) Result IEEE 802.11b 1 0 2412 9.050 ≥0.5 PASS 6 2437 9.060 PASS 11 2462 8.570 PASS IEEE 802.11g 1 2412 15.71 PASS 6 2437 16.33 PASS 11 2462 16.33 PASS IEEE 802.11n_20 1 2412 17.11 PASS 6 2437 15.87 PASS 11 2462 17.28 PASS IEEE 802.11n_40 3 2422 26.34 PASS 6 2437 30.04 PASS 9 2452 35.75 PASS Test Graphs IEEE 802.11b_Channel 1_20MHz_Antenna 0 IEEE 802.11b_Channel 6_20MHz_Antenna 0 IEEE 802.11b_Channel 11_20MHz_Antenna 0 IEEE 802.11g_Channel 1_20MHz_Antenna 0 Page 5 of 15 Report No.: AiTSZ-250820046FW1 IEEE 802.11g_Channel 6_20MHz_Antenna 0 IEEE 802.11g_Channel 11_20MHz_Antenna 0 IEEE 802.11n_Channel 1_20MHz_Antenna 0 IEEE 802.11n_Channel 6_20MHz_Antenna 0 IEEE 802.11n_Channel 11_20MHz_Antenna 0 IEEE 802.11n_Channel 3_40MHz_Antenna 0 IEEE 802.11n_Channel 6_40MHz_Antenna 0 IEEE 802.11n_Channel 9_40MHz_Antenna 0 Page 6 of 15 Report No.: AiTSZ-250820046FW1 Conducted Out Of Band Emission Test Result Mode Channel Ant. OOB Emission Frequency (MHz) OOB Emission Level (dBm) Limit (dBm) Over Limit (dB) Result IEEE 802.11b 1 0 2396.97 -46.786 -15.9 -30.886 PASS 2400.00 -47.310 -15.9 -31.410 PASS 24915.1 -38.903 -15.9 -23.003 PASS 6 24837.1 -39.723 -14.05 -25.673 PASS 11 2483.50 -53.440 -17.0 -36.440 PASS 24946.9 -39.584 -17.0 -22.584 PASS IEEE 802.11g 1 2398.27 -37.426 -21.78 -15.646 PASS 2400.00 -38.990 -21.78 -17.210 PASS 24932.0 -39.339 -21.78 -17.559 PASS 6 24989.4 -39.609 -20.42 -19.189 PASS 11 2483.50 -50.500 -26.8 -23.700 PASS 24926.3 -40.145 -26.8 -13.345 PASS IEEE 802.11n_20 1 2400.00 -35.410 -26.11 -9.300 PASS 24978.2 -39.889 -26.11 -13.779 PASS 6 24946.9 -39.810 -22.21 -17.600 PASS 11 2483.50 -50.730 -26.91 -23.820 PASS 24984.4 -39.404 -26.91 -12.494 PASS IEEE 802.11n_40 3 2397.10 -37.586 -24.09 -13.496 PASS 2400.00 -41.760 -24.09 -17.670 PASS 24349.5 -39.329 -24.09 -15.239 PASS 6 24344.5 -40.436 -24.29 -16.146 PASS 9 2483.50 -50.090 -24.11 -25.980 PASS 24967.5 -40.472 -24.11 -16.362 PASS Page 7 of 15 Report No.: AiTSZ-250820046FW1 Test Graphs In-Band Reference Level IEEE 802.11b_Channel 1_20MHz_Antenna 0 Out Of Band Emission IEEE 802.11b_Channel 1_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11b_Channel 1_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11b_Channel 6_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11b_Channel 6_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11b_Channel 11_20MHz_Antenna 0 Page 8 of 15 Report No.: AiTSZ-250820046FW1 Out Of Band Emission IEEE 802.11b_Channel 11_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11b_Channel 11_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11g_Channel 1_20MHz_Antenna 0 Out Of Band Emission IEEE 802.11g_Channel 1_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11g_Channel 1_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11g_Channel 6_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz In-Band Reference Level Page 9 of 15 Report No.: AiTSZ-250820046FW1 IEEE 802.11g_Channel 6_20MHz_Antenna 0 IEEE 802.11g_Channel 11_20MHz_Antenna 0 Out Of Band Emission IEEE 802.11g_Channel 11_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11g_Channel 11_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11n_Channel 1_20MHz_Antenna 0 Out Of Band Emission IEEE 802.11n_Channel 1_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11n_Channel 1_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11n_Channel 6_20MHz_Antenna 0 Page 10 of 15 Report No.: AiTSZ-250820046FW1 30.0 MHz - 25000.0 MHz IEEE 802.11n_Channel 6_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11n_Channel 11_20MHz_Antenna 0 Out Of Band Emission IEEE 802.11n_Channel 11_20MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11n_Channel 11_20MHz_Antenna 0 In-Band Reference Level IEEE 802.11n_Channel 3_40MHz_Antenna 0 Out Of Band Emission IEEE 802.11n_Channel 3_40MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11n_Channel 3_40MHz_Antenna 0 In-Band Reference Level IEEE 802.11n_Channel 6_40MHz_Antenna 0 Page 11 of 15 Report No.: AiTSZ-250820046FW1 30.0 MHz - 25000.0 MHz IEEE 802.11n_Channel 6_40MHz_Antenna 0 In-Band Reference Level IEEE 802.11n_Channel 9_40MHz_Antenna 0 Out Of Band Emission IEEE 802.11n_Channel 9_40MHz_Antenna 0 30.0 MHz - 25000.0 MHz IEEE 802.11n_Channel 9_40MHz_Antenna 0 Page 12 of 15 Report No.: AiTSZ-250820046FW1 Duty Cycle Test Result Mode Data rates Channel Antenna On Time (ms) Period (ms) Duty Cycle (%) Duty Cycle (linear) Duty Cycle Factor (dB) 1/T IEEE 802.11b 1 1 1 8.416 8.465 99.42 0.9942 0.0253 0.1188 6 8.416 8.464 99.44 0.9944 0.0244 0.1188 11 8.416 8.464 99.44 0.9944 0.0244 0.1188 IEEE 802.11g 1 1.4…

Text truncated - open the document above for the full version.

Page1of2FCCID: 2BCK8-V6 Page2of2FCCID: 2BCK8-V6