2BCNR-YRS1000MyForm

TTC, NHT, ILM 23/11/2023 MyForm Product Specification (Project Span) 9 January 2024 2 THROUGH MOUNT VARIATION Pairing Button Bluetooth and low battery Status LED (Blue and Red) Battery Status LED (Red and Green) Battery Charging Port 9 January 2024 3 FRONT MOUNT VARIATION Pairing Button Bluetooth Status LED (Blue and Red) Battery Status LED (Red and Green) Battery Charging Port 9 January 2024 4 902 HOUSING UPPER THROUGH SPAN-013_HOUSING_UPPER_THROUGH_Light_Pipe SPAN-008_HOUSING_UPPER_THROUGH_Button SPAN-012_HOUSING_UPPER_THROUGH_Button_Insert SPAN-P01-MAIN-BD SPAN-006_HOUSING_UPPER_Base SPAN-005_HOUSING_UPPER_THROUGH_Body 9 January 2024 5 903 HOUSING UPPER FRONT SPAN-011_HOUSING_FRONT_Custom_LED_Light_Pipe SPAN-009_HOUSING_UPPER_FRONT_Button SPAN-010_HOUSING_UPPER_FRONT_Insert SPAN-P01-MAIN-BD SPAN-006_HOUSING_UPPER_Base SPAN-007_HOUSING_UPPER_FRONT_Body 9 January 2024 6 901 BATTERY MODULE SPAN-014_BATTERY_MODULE_Light_Pipe SPAN-P02-BATTERY-BD_E2 BATTERY_HJBP LP523450-10-1S1P SPAN-001_BATTERY_MODULE_Housing_Main SPAN-002_BATTERY_MODULE_Housing_Top BATTERY_Isolation_Foam 9 January 2024 7 MAIN PCB – TOPLAYER BLE module SW2 : Tact switch LED2 : Blue LED Secondary Tact Switch (for alternate implementation) LED 1 : Secondary Blue LED (for alternate implementation) U2 : BMI270 Accelerometer J3 : TC2030 for J-link Reserved connectors for internal test purpose 1VINV input (3-5V) 2SWDIOSWDIO 3Vref3.0V (V out) 4SWDCLKSWDCLK 5GNDGROUND 6ResetReserved 1 2 3 4 5 6 9 January 2024 8 MAIN PCB – BOTTOM LAYER J2 : Battery contacts ISP Connector 1N/C- 2GNDGround 3VCCVBAT (3.0 – 4.2V) 123 TP9GNDGROUND TP16SCLKSWDCLK TP17SWDSWDIO TP103V0Vref (V out : 3V0) TP12VINV input (3 -5V) 1VINVBAT (3.0 – 4.2V) 2GNDGround Input voltage 13V03.0V output 2GNDGround Regulator output voltage 1TXDUART-TX 2RXDUART-RX 3GNDGround J1 : UART 9 January 2024 9 BATTERY PCB – TOP LAYER LED1 : Battery status LED Green : Fully charged Red : Being charged J2 : Battery connector J3 : Mainboard contacts 123 1VBATBattery + 2NTCNTC (10k, B=3435) 3GNDBattery - 1VBATBattery + 2GNDGround 3N/C- 1VINV input to U1 2STATU1 Status Test points for U1 charger IC 9 January 2024 10 BATTERY PCB – BOTTOM LAYER U1 : MP26029 Battery Charger IC Max 1A (Setting : 0.5A) J1 : SMD USB-C Connector (Power only) ICP Connector TP5GNDGROUND TP1VBUSUSB input voltage (5V) 9 January 2024 11 USER INTERFACE - THROUGH MOUNT VARIATION Battery Status LED Shows red when plugged in and charging Shows green plugged in and fully charged Bluetooth Status LED •Turns on for 1 second when battery connected •In pairing mode Blinks once every 500ms in pairing mode for 1 minute, or until successfully paired •Blinks SOS pattern when hardware error detected (cannot access accelerometer) Pairing Button Manually activates pairing mode 9 January 2024 12 USER INTERFACE - FRONT MOUNT VARIATION Battery Status LED Shows red when plugged in and charging Shows green plugged in and fully charged Bluetooth Status LED •Turns on for 1 second when battery connected •In pairing mode Blinks once every 500ms in pairing mode for 1 minute, or until successfully paired •Blinks SOS pattern when hardware error detected (cannot access accelerometer) Pairing Button Manually activates pairing mode 9 January 2024 13 SPECIFICATIONS Attribute Value Remark Power Charging input Voltage / Current5V / 0.5AUSB-C connector Digital I/O voltage3.0V Charger ICMP26029GQ-XXXX-ZLi-ion charger (Max 1A) Battery capacity Battery voltage range3.0 – 4.2V Battery cut-off threshold3.0V Battery capacity1000mAh Current consumption SleepLess than 0.05mA Advertising0.05 – 0.08mA Connection1.7 – 2.2mA Main platform BLE ModuleBM832-PFanstel BLE SoCnRF52832Nordic Semiconductor Flash512KB RAM64KB Core64 MHz Cortex-M4 with FPU ConnectivityBluetooth Low Energy2.4GHz ISM band Battery pack IndicatorGreen / Red dual LED Green : Vf = max 2.5V, If = 30mA Red : Vf = max 2.5V, If = 30mA Iv = 80 – 200mcd Main module indicatorBlue / Red dual LED Blue : Vf = max 3.4V, If = 2mA, Red : Vf = max 2.5V, f = 2mA Iv = 20 -36mcd 9 January 2024 14 FIRMWARE PROGRAMMING 0 - Preparation 1) SEGGER J-LINK 2) 5PIN – 2.5mm pitch Pogo probe (or TAC2030) 3) Firmware package 4) Laptop and nRF Connect for Desktop (Programmer) 1. Option 1 : Tag connect TAC2030 1) The main board has the Tag connect interface on the top layer. 2) Before connecting TAC2030, check the pin description of J3 and J-Link 3) Refer to the below example wiring diagram. J3 for TAC2030 connect TOP LAYER 1VINV input (3-5V) 2SWDIOSWDIO 3Vref3.0V (V out) 4SWDCLKSWDCLK 5GNDGROUND 6ResetReserved 1 2 3 4 5 6 PinDescription 19VIN 7SWDIO 1Vref 9SWDCLK 20GND 15Reset 9 January 2024 15 2. Option 2 : contacts for ISP 1) The bottom layer also has the ISP contact for firmware programming. 2) They are designed for ICT jig. 3) If ICT jig doesn’t have the programming feature, Pogo probe can be used. 3) Refer to the below example wiring diagram. FIRMWARE PROGRAMMING Pogo probe PinDescription 20Ground 9SWDCLK 7SWDIO 1VTref 195V-Supply BOTTOM LAYER ISP Connector TPSignalDescro[topm 9GNDGROUND 16SCLKSWDCLK 17SWDSWDIO 103V0Vref (V out : 3V0) 12VINV input (3 -5V) 9 January 2024 16 3 – Running nRF Connect for Desktop and Programmer 1) Connect the Segger J-Link to the device 2) Run nRF Connect for Desktop and run Programmer FIRMWARE PROGRAMMING 9 January 2024 17 4 – Generating Identity-out file 1) Check the “identity-base.bin” file if it is the latest version. 2) Check if “identity-out.bin” and “identity-out.hex” exist in the same folder. If yes, check the bin file if it was generated before and delete them. 3) Run identityMain.exe 4) Then, identity-out.bin and identity-out.hex will be generated. 5) For the serial data format, refer to the word file “SPAN_SN_CB_SPEC.docx” FIRMWARE PROGRAMMING Identity-base.bin Template file for the output IdentityMain.exe Executable file to generate the identity- out.bin and identity-out.hex file. Identity-out.bin / identity-out.hex Output file with serial data. The information can be viewed wi…

Text truncated - open the document above for the full version.

SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD 601,Building1,YibaolaiIndustrialCity,QiaotouCommunity,FuhaiStreet,Bao'anDistrict,Shenzhen City,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-15 To whom it may concern: We,SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD, hereby certify that the equipment for which authorization is sought FCC ID: 2BCNR-YRS1000is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist ) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature mingshen zhang SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD 62_[model]CoveredEqu_2.911(d)(5)(i)and(ii)-U,V03

SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD 601,Building1,YibaolaiIndustrialCity,QiaotouCommunity,FuhaiStreet,Bao'anDistrict,Shenzhen City,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-15 U.S. Agent Designation SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD.acknowledges their consent for the following contact located in the United States to act as their agent for service of process forthe equipment for which authorization is sought FCC ID:2BCNR-YRS1000 Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: [email protected] ACT Lab LLCacknowledges their obligation to accept service of process on behalf of SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD. SHENZHEN EESTANDARD TECHNOLOGY CO.,LTDwith the FRN0034169987accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature mingshen zhang SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD Signature Scott Huber Senior Technical Director ACT Lab LLC 48_[model]US_Agent_2.911(d)(7)-U,V05

SHENZHENEESTANDARDTECHNOLOGYCO.,LTD Add:601,Building1,YibaolaiIndustrialCity,QiaotouCommunity,FuhaiStreet,Bao 'anDistrict,ShenzhenCity,China Date:2024-3-15 FCCID:2BCNR-YRS1000 DearSir/Madam, We,SHENZHENEESTANDARDTECHNOLOGYCO.,LTDHerebydeclaresthefollowing statementforFederalCommunicationsCommission,PCBboard,circuit,structureandinternal ofthesemodel(s)arethesame,OnlyappearanceButtonandcolorisdifferentforthesemodel: Productname:MyForm Modelno.:YRS-1000,YRS-1001,YRS-1002 Sincerely, Name/Title： mingshenzhang/ Company: SHENZHENEESTANDARDTECHNOLOGYCO.,LTD Address: 601,Building1,YibaolaiIndustrialCity,Qiaotou Community,FuhaiStreet,Bao'anDistrict,ShenzhenCity, China Phone: 008615818750927 Fax: 020-26509195 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-3-15> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BCNR-YRS1000YRS-1000 For the product stated above, we request that the following information beheld confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： mingshen zhang/ Company: SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD Address: 601, Building 1, Yibaolai Industrial City, Qiaotou Community, Fuhai Street, Bao 'an District, Shenzhen City, China Phone: 0086 15818750927 Fax: 020-26509195 E-Mail: [email protected]

SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD 601, Building 1, Yibaolai Industrial City, Qiaotou Community, Fuhai Street, Bao 'an District, Shenzhen City, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-15 To whom it may concern: We,SHENZHEN EESTANDARDTECHNOLOGY CO.,LTDthe undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BCNR-YRS1000including the signing of all documents relatedtothesematters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed onfollowing website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title ： mingshen zhang/ Company: SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD Address: 601, Building 1, Yibaolai Industrial City, Qiaotou SHENZHEN EESTANDARD TECHNOLOGY CO.,LTD 601, Building 1, Yibaolai Industrial City, Qiaotou Community, Fuhai Street, Bao 'an District, Shenzhen City, China Community, Fuhai Street, Bao 'an District, Shenzhen City, China Phone: 0086 15818750927 Fax: 020-26509195 E-Mail: [email protected]

FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Appendix II EUT External Photographs Model: YRS-1000 Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 11 Appearance of EUT Photo 12 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 13 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Model:YRS-1002 Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 11 Appearance of EUT Photo 12 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 13 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 HVIN/Model:YRS-1000 Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT

FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Appendix IID Label and Label Location Material: Tagboard Glue: adhesive sticker Font color: Black Label color: Yellow HVIN/Model: YRS-1001 FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Material: Tagboard Glue: adhesive sticker Font color: Black Label color: Yellow HVIN/Model: YRS-1002 FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Material: Tagboard Glue: adhesive sticker Font color: Black Label color: Yellow HVIN/Model: YRS-1000

FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Appendix III EUT Internal Photographs Model: YRS-1000 Photo 14 Internal of EUT Photo 15 Appearance of PCB & Battery FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 16 Appearance of PCB & Battery Photo 17 Internal of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 18 Appearance of PCB Photo 19 Appearance of PCB FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 20 Appearance of PCB Photo 21 Appearance of PCB BLE Antenna FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Model: YRS-1002 Photo 14 Internal of EUT Photo 15 Appearance of PCB & Battery FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 16 Appearance of PCB & Battery Photo 17 Internal of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 16 Internal of EUT Photo 17 Appearance of PCB FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 18 Appearance of PCB BLE Antenna FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 HVIN/Model: YRS-1000 Photo 11 Internal of EUT Photo 12 Internal of EUT FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 13 Appearance of PCB & Battery Photo 14 Appearance of PCB & Battery FCC ID:2BCNR-YRS1000 TB-RF-074-1.0 Photo 15 Appearance of PCB Photo 16 Appearance of PCB BLE Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202401-0361-8 Page: 1 of 3 TB-RF-074-1.0 1 A/F., Building.6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao’an, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2BCNR-YRS1000 1. Client Information Applicant : SHENZHEN EESTANDARD TECHNOLOGY CO., LTD Address : 601, Building 1, Yibaolai Industrial City, Qiaotou Community, Fuhai Street, Bao 'an District, Shenzhen City, China Manufacturer : SHENZHEN EESTANDARD TECHNOLOGY CO., LTD Address : 601, Building 1, Yibaolai Industrial City, Qiaotou Community, Fuhai Street, Bao 'an District, Shenzhen City, China 2. General Description of EUT EUT Name : MyForm Models No. : YRS-1000, YRS-1001, YRS-1002 Model Different : All PCB boards and circuit diagrams are the same, the only difference is that appearance Button and color. Product Description : Operation Frequency: Bluetooth 5.2(BLE): 2402MHz~2480MHz Antenna Gain: 0.24dBi PCB Antenna Power Supply : Input: DC 5V/1A Li-ion Polymer Battery : 3.7V by 1000mAh Rechargeable Li-ion battery Software Version : V1.0 Hardware Version : 1.0, 1.0 Connecting I/O Port(S) : : Please refer to the User's Manual Remark: (1) The antenna gain provided by the applicant, the verified for the RF conduction test provided by TOBY test lab. (2) The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202401-0361-8 Page: 2 of 3 TB-RF-074-1.0 MPE Calculations for WIFI 1. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 2. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 3. Simultaneous transmission MPE Considerations According to KDB447498: All transmitters and antennas in the host must be either evaluated for MPE compliance, by measurement or computational modeling, or qualify for the standalone MPE test exclusion in section 7.1. Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. This means that: ∑ of MPE ratios ≤ 1.0 4. Test Result: worst reported. BLE MPE Result Mode N TX Freq. (MHz) Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/cm 2 ) [S] BLE (1Mbps) 1 2402 -0.095 0±1 1 0.24 20 0.0003 2440 -0.039 0±1 1 0.24 20 0.0003 2480 0.183 0±1 1 0.24 20 0.0003 BLE (2Mbps) 1 2402 -0.017 0±1 1 0.24 20 0.0003 2440 0 0±1 1 0.24 20 0.0003 2480 0.223 0±1 1 0.24 20 0.0003 Note: N TX = Number of Transmit Antennas RF Output power specifies that Maximum Conducted Peak Output Power. Report No.: TBR-C-202401-0361-8 Page: 3 of 3 TB-RF-074-1.0 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 For Bluetooth LE MPE limit S: 1mW/cm 2 The MPE is calculated as 0.0003mW/cm2 < limit 1mW / cm 2 . So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. 6. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. -----END OF REPORT-----

V . S .W . R < 1.4 Polarization Type V ertical & Horizontal Frequenc Range2400 ~ 2500GHz Input Impendence(ohm)50 Efficiency (dB) 6 0.2 % 6 0.2 %-3.6 0.24-1.2 Maximum Power (dBm)1.7 (XY-plane) Gain (dBi) 0.24 Peak EIRP(dBm)1.2 Tot. Rad. Pwr. (dBm)-1.2 (Input pwr – loss pwr) Product specification Quick Re ference Date Antenna module on the system board Ant. Port Input Pwr. (dBm)0 (Typ. BT class 2 output power) Directivity (dBi)1 (all direction antenna) Minimum Power (dBm)-4(XY-plane) Avg. Power (dBm)-0.5(XY-plane) All the technical data and information contained herein are subject to change without prior notice Antenna Gain Gain Table Unit in dBi @2.44GHzXY-planeXZ-planeYZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Module Board -2.0-1.1 -3.0 深 圳市千目通讯科技有限公司 Shenzhen Qianmu Communication Technology Co.,Ltd. Return Loss The Environment of Antenna Radiation Pattern 3D radiation pattern diagram

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 1 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 RF Test Data for Bluetooth LE (Conducted Measurements) General Description of EUT Product Name: MyForm Test Model: YRS-1000 Sample ID: 202401-0361-5-2# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 3.7V Test Engineer: Mike Yan Note: For a more detailed features description, please refer to the report TBR-C-202401-0361-9 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 2 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 7 3. -6dB Bandwidth ................................................................................................................................................................................ 11 4. Occupied Channel Bandwidth ......................................................................................................................................................... 15 5. Maximum Power Spectral Density Level ......................................................................................................................................... 19 6. Band Edge ........................................................................................................................................................................................ 23 7. Conducted RF Spurious Emission .................................................................................................................................................. 28 8. Restrict Band .................................................................................................................................................................................... 35 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 3 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT BLE 1Mbps 2402 Ant1 62.9 2.01 2.56 NVNT BLE 1Mbps 2440 Ant1 62.9 2.01 2.56 NVNT BLE 1Mbps 2480 Ant1 62.9 2.01 2.56 NVNT BLE 2Mbps 2402 Ant1 33.87 4.7 4.76 NVNT BLE 2Mbps 2440 Ant1 33.33 4.77 4.76 NVNT BLE 2Mbps 2480 Ant1 33.87 4.7 4.76 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 4 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT BLE 1Mbps 2402MHz Ant1 Duty Cycle NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 5 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Duty Cycle NVNT BLE 1Mbps 2480MHz Ant1 Duty Cycle NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 6 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Duty Cycle NVNT BLE 2Mbps 2440MHz Ant1 Duty Cycle NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 7 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT BLE 1Mbps 2402 Ant1 -0.095 30 Pass NVNT BLE 1Mbps 2440 Ant1 -0.039 30 Pass NVNT BLE 1Mbps 2480 Ant1 0.183 30 Pass NVNT BLE 2Mbps 2402 Ant1 -0.017 30 Pass NVNT BLE 2Mbps 2440 Ant1 0 30 Pass NVNT BLE 2Mbps 2480 Ant1 0.223 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 8 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Test Graphs Power NVNT BLE 1Mbps 2402MHz Ant1 Power NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 9 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Power NVNT BLE 1Mbps 2480MHz Ant1 Power NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 10 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 Power NVNT BLE 2Mbps 2440MHz Ant1 Power NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0361-9 Page: 11 of 39 FCC ID: 2BCNR-YRS1000 TB-RF-074-1.0 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict …

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202401-0361-9 Page: 1 of 44 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2BCNR-YRS1000 Report No. : TBR-C-202401-0361-9 Applicant : SHENZHEN EESTANDARD TECHNOLOGY CO., LTD Equipment Under Test (EUT) EUT Name : MyForm Model No. : YRS-1000 Series Model No. : YRS-1001, YRS-1002 Brand Name : YourReformer Sample ID : 202401-0361-5-1# & 202401-0361-5-2# Receipt Date : 2024-02-22 Test Date : 2024-02-22 to 2024-03-15 Issue Date : 2024-03-15 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Mike Yan Reviewed By : Camille Li Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202401-0361-9 Page: 2 of 44 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility ........................................................................................................................... 9 2. TEST SUMMARY ..................................................................................................................... 10 3. TEST SOFTWARE ................................................................................................................... 10 4. TEST EQUIPMENT AND TEST SITE ................................................................................... 11 5. CONDUCTED EMISSION ........…

Text truncated - open the document above for the full version.