2BCTM-BDH200Stick Logger

1/8页 BDH200-WU Data Acquisition Terminal(Stick Logger) User Manual This document describes the product information of the BDH200-WU data acquisition terminal(Stick Logger), including product features, performance specifications, electrical characteristics, and external dimensions. 2/8页 Directory 1 Product description ................................................................................................. 3 1.1 Overview ....................................................................................................... 3 1.2 Product features ........................................................................................... 3 1.3 Applications .................................................................................................. 4 2 Technical indicators ................................................................................................. 4 2.1 Performance indicators ................................................................................ 4 2.2 Direct current characteristic ......................................................................... 5 2.3 Temperature characteristic ........................................................................... 5 2.4 Indicator light description ............................................................................ 5 3 Structure block diagram .......................................................................................... 6 4 Interface Instructions .............................................................................................. 6 4.1 Connection interface with DAT ..................................................................... 6 4.2 Software Interface Description ..................................................................... 7 1 Product description Figure 1 BDH200-WU Frontal view of the data acquisition terminal 1.1 Overview BDH200-WU Data acquisition terminal(Stick Logger) (Hereinafter referred to DAT) is our independent development,specially designed for inverter data acquisition, processing, storage and remote transmission.. It adopts the integrated design of antenna host,, integrates WiFi communication, Bluetooth communication, RF transceiver circuit, baseband circuit, etc., with high integration degree and low power consumption, and is equipped with special fixed structure. Install and use is very convenient. In order to adapt to the inconvenient environment such as outdoor and bad weather, the design of the DAT fully considers the requirements of waterproof, anti-fall and anti-corrosion. 1.2 Product features  WiFi communication function  Bluetooth communication function  The cloud remote upgrade  WiFi near field upgrade  NTP timing function  Remote maintenance function  Data remote transmission function  Multi-master station (platform) connection function  Data acquisition, processing and storage functions  Dimensions: 70mm*46mm*29mm  Protection grade: IP65  Data interface:USB Type-A3.0(Default)  Protocol version: modbus communication protocol,、MQTT communication protocol, etc  Color: Black (default) 1.3 Applications  Inverter data acquisition and transmission  Data acquisition and transmission of other smart devices 2 Technical indicators 2.1 Performance indicators Table 1 performance indicators Indicator Parameter WiFi Operating frequency 2412-2462MHz for 802.11b/g/n(HT20) 2422-2452MHz for 802.11n(HT40) Protocol version IEEE 802.11 b/g/n protocol Modulation mode CCK, OFDM, QPSK, BPSK, 16QAM, 64QAM work pattern AP + STA Bluetooth Operating frequency 2.402~2.480 GHz Protocol version V5.2 Modulation mode GFSK work pattern Bluetooth low energy（Bluetooth LE） 2.2 Direct current characteristic Table 2 direct current characteristic Parameter Symbol Min Standard Max Unit Condition Supply voltage VCC 5 12 24 V 12V power supply Emission open current I TX 165 250 400 mA 12V power supply Single receiving current I RX 110 120 140 A 12V power supply *The test conditions were all at room temperature of 25°C; *The power supply must meet the power supply capacity of more than 10W. 2.3 Temperature characteristic Table 3 temperature characteristic Parameter Min Standard Max Unit Operating temperature -30 25 70 °C Storage temperature -45 25 90 °C 2.4 Indicator light description There are 3 indicators on the front of the terminal, refer to the table below for definition: Table 4 led definition Function Color Definition READY green In normal operation, the green light is flashing, and the abnormal light is often off or on; COM green In normal operation, the green is always bright, and the abnormal is often off; NET green In normal operation, the green is always bright, and the abnormal is often off； 3 Structure block diagram Terminal can complete implementation of the bluetooth communication and WiFi communication function, its internal basic block diagram is shown in figure 2. Figure 2 Overall block diagram of DAT 4 Interface Instructions 4.1 Connection interface with DAT The DAT adopts USB Type-A3.0 interface, and the pin is defined as follows: Table 5 pin definition PIN Description Network name Types Notes 1 Power supply VCC VCC Power Power supply from 4.5 V to 5.5 V 3.5 W 2 NC NC NC 3 NC NC NC 4 The power GND GND Power The power GND 5 data communication RS485-B I/O RS485-B line 6 data communication RS485-A I/O RS485-A line 7 NC NC NC 8 NC NC NC 9 NC NC NC The pin diagram is shown in FIG 3: Figure 3 DAT interface pin diagram 4.2 Software Interface Description Table 6 software protocol Serial number Protocol version 1 Modbus Communication protocol 2 Master communication protocol（MQTT or custom protocols） 5 FCC Radiation Exposure Statement: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety o…

Text truncated - open the document above for the full version.

Reference No.: WTH23X08177917W001/002 Page 2 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Reference No.: WTH23X08177917W001/002 Page 3 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTH23X08177917W001/002 Page 4 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTH23X08177917W001/002 Page 5 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 7

Reference No.: WTH23X08177917W001/002 Page 1 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTH23X08177917W001/002 Page 5 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Solder Board-Component View 1 Reference No.: WTH23X08177917W001/002 Page 6 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 2 Solder Board-Component View 3 Reference No.: WTH23X08177917W001/002 Page 7 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 4 Solder Board-Component View 5 Reference No.: WTH23X08177917W001/002 Page 8 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 6 Solder Board-Component View 7 Reference No.: WTH23X08177917W001/002 Page 9 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Antenna View WIFI and BT Antenna

Page: 1/13 Ref : ACR.104.1.23.SATU.A Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 08/20/2023 Accreditations #2-6789 and #2-6814 Scope available on www.cofrac.fr The use of the Cofrac brand and the accreditation references is prohibited from any reproduction. Summary: This document presents the method and results from an accredited SAR reference dipole calibration performed in MVG using the COMOSAR test bench. All calibration results are traceable to nationa l metrology institutions. SAR Reference Dipole Calibration Report Waltek Testing Group (Shenzhen) Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2 nd Road BAO'AN DISTRICT SHENZHEN, P.R.C. (518101) MVG COMOSAR REFERENCE DIPOLE FREQUENCY: 2450 MHZ SERIAL NO.: SN 13/15 DIP 2G450-364 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.104.1.23.SATU.A Page: 2/13 Template_ACR.DDD.N.YY.MVGB.ISSUE_SAR Reference Dipole vJ This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. NameFunctionDateSignature Prepared by :Jérôme LucTechnical Manager 08/20/2023 Checked by :Jérôme LucTechnical Manager 08/20/2023 Approved by:Yann ToutainLaboratory Director 08/20/2023 Customer Name Distribution : IssueNameDateModifications AJérôme Luc 08/20/2023 Initial release 2023.08.20 11:56:55 +01'00' Waltek Testing Group (Shenzhen) Co., Ltd. SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.104.1.23.SATU.A Page: 3/13 Template_ACR.DDD.N.YY.MVGB.ISSUE_SAR Reference Dipole vJ This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Introduction ................................................................................................................ 4 2 Device Under Test ..................................................................................................... 4 3 Product Description ................................................................................................... 4 3.1 General Information _______________________________________________________ 4 4 Measurement Method ................................................................................................ 5 4.1 Return Loss Requirements __________________________________________________ 5 4.2 Mechanical Requirements ___________________________________________________ 5 5 Measurement Uncertainty .......................................................................................... 5 5.1 Return Loss ______________________________________________________________ 5 5.2 Dimension Measurement ___________________________________________________ 5 5.3 Validation Measurement ____________________________________________________ 5 6 Calibration Measurement Results .............................................................................. 6 6.1 Return Loss and Impedance In Head Liquid ____________________________________ 6 6.2 Return Loss and Impedance In Body Liquid ____________________________________ 6 6.3 Mechanical Dimensions ____________________________________________________ 7 7 Validation measurement ............................................................................................ 7 7.1 Head Liquid Measurement __________________________________________________ 8 7.2 SAR Measurement Result With Head Liquid ____________________________________ 8 7.3 Body Liquid Measurement _________________________________________________ 11 7.4 SAR Measurement Result With Body Liquid __________________________________ 12 8 List of Equipment .................................................................................................... 13 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.104.1.23.SATU.A Page: 4/13 Template_ACR.DDD.N.YY.MVGB.ISSUE_SAR Reference Dipole vJ This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 INTRODUCTION This document contains a summary of the requirements set forth by the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards for reference dipoles used for SAR measurement system validations and the measurements that were performed to verify that the product complies with the fore mentioned standards. 2 DEVICE UNDER TEST Device Under Test Device Type COMOSAR 2450 MHz REFERENCE DIPOLE Manufacturer MVG Model SID2450 Serial Number SN 13/15 DIP 2G450-364 Product Condition (new / used) New 3 PRODUCT DESCRIPTION 3.1 GENERAL INF ORMATION MVG’s COMOSAR Validation Dipoles are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. The product is designed for use with the COMOSAR test bench only. Figure 1 – MVG COMOSAR Validation Dipole SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.104.1.23.SATU.A Page: 5/13 Template_ACR.DDD.N.YY.MVGB.ISSUE_SAR Reference Dipole vJ This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 4 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide requirements for reference dipoles used for system validation measurements. The following measurements were performed to verify that the product complies with the fore mentioned standards. 4.1 RETURN LOSS REQUIREMENTS The dipole used for SAR system validati…

Text truncated - open the document above for the full version.

Phone：0755-23205219Officialwebsite：http://www.hxrf-antenna.com/ Address：Address:2ndand5thFloor,WestofBuildingC10,Xin'anSecondIndustrialZone, GuxingCommunity,XixiangStreet,Bao'anDistrict,Shenzhen PassISO9001QualityManagement SystemCertification CertificateNumber：06520Q01851ROM 1 ShenzhenHXAntennaCo.,Ltd. SPECIFICATIONFORAPPROVAL Nameofthecompany ： Nameofanarticle ： 2.4GGluestickantenna Materialcode ： HX-AP24-10511-D5 Customeritemnumber ： Specifications:Seethespecification Date ： 2023-09-05 Customercountersignature: DepartmentofEngin eering QualitydepartmentApprove ShenzhenhongxintechnologyelectronicsCo.Ltd: DepartmentofEngin eering QualitydepartmentApprove HuangXiaoyuZhangHuanZhuangWeifeng Phone：0755-23205219Officialwebsite：http://www.hxrf-antenna.com/ Address：Address:2ndand5thFloor,WestofBuildingC10,Xin'anSecondIndustrialZone, GuxingCommunity,XixiangStreet,Bao'anDistrict,Shenzhen PassISO9001QualityManagement SystemCertification CertificateNumber：06520Q01851ROM 2 一： Antennaparameter DesignSpecificationsTypicalUnits 天线形式(Antennaform)GluerodantennaN/A 工作频率（workingFrequency）2400-2500MHZ 增益(Gain)3DBi 天线效率（Antennaefficiency）35~80% 电压驻波比（VSWR）<1.8N/A 极化方式（Polarization）VerticalpolarizationN/A 辐射方向（Radiationpattern）360°N/A 馈电阻抗（impedance）50ohm 功率容量（Powerhandling）33dbm 天线尺寸（Antennasize）105*11mm 天线接口（Interface）Fixedandnon-removable 重量（Weight）NorequirementN/A 工作温度（OperatingTemp）-30-70°C 储存温度（StoringTemp）-30-70°C Phone：0755-23205219Officialwebsite：http://www.hxrf-antenna.com/ Address：Address:2ndand5thFloor,WestofBuildingC10,Xin'anSecondIndustrialZone, GuxingCommunity,XixiangStreet,Bao'anDistrict,Shenzhen PassISO9001QualityManagement SystemCertification CertificateNumber：06520Q01851ROM 3 Fill: 1.Theantennaparametersaretestedaccordingtothesimulatedenvironment, andtherewillbeperformancedeviationsfordifferentproducts. 2.Thefunctionoftheantennaissensitive.Pleaseinformustoevaluateif thereisanychangeintheperipheralstructureofthemainbody. 3.Sincetheuseenvironmentoftheproductisoutdoor,itmaybeinahightemperature,humidity, corrosiveenvironment,theantennausingthegluedroppingprocesscaneffectivelypreventthe humidandcorrosiveairfromenteringtheshell,ensurethattheantennaispermanentlyconnected tonon-removableaccessories,andistheonlyconnectorantenna,therebyimprovingtheoverall performanceoftheproduct. 二、VSWR（电压驻波比）/ReturnLoss（回波损耗）/SmithChart （史密斯圆图） Phone：0755-23205219Officialwebsite：http://www.hxrf-antenna.com/ Address：Address:2ndand5thFloor,WestofBuildingC10,Xin'anSecondIndustrialZone, GuxingCommunity,XixiangStreet,Bao'anDistrict,Shenzhen PassISO9001QualityManagement SystemCertification CertificateNumber：06520Q01851ROM 4 三：Storageenvironment Workingtemperature:-30to70ºC Reservetemperature:-30to70ºC 四：Radiationpattern Phone：0755-23205219Officialwebsite：http://www.hxrf-antenna.com/ Address：Address:2ndand5thFloor,WestofBuildingC10,Xin'anSecondIndustrialZone, GuxingCommunity,XixiangStreet,Bao'anDistrict,Shenzhen PassISO9001QualityManagement SystemCertification CertificateNumber：06520Q01851ROM 5 五： D imensions

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 38 TEST REPORT Reference No. ....................: WTH23X08177917W002 FCC ID ............................... .: 2BCTM-BDH200 Applicant .......................... .: Guangzhou Bonzn Power Technology Co.,Ltd. Address ............................ .: Floor 1,No. 3 Xiangshan Road,High-tech Development Zone,Guangzhou Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: Stick Logger Model No.. ......................... .: BDH200 Series Standards ......................... .: FCC Part 15.247 Date of Receipt sample ... .: 2023-08-14 Date of Test....................... .: 2023-08-14 to 2023-08-30 Date of Issue .................... .: 2023-08-30 Test Report Form No. ...... . : WTX_Part 15_247W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Gala Wang Silin Chen Reference No.: WTH23X08177917W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 38 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................... 5 1.4 TEST FACILITY ...................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE .............................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 11 3. ANTENNA REQUIREMENT ................................................................................................................................. 12 3.1 STANDARD APPLICABLE ..................................................................................................................................... 12 3.2 EVALUATION INFORMATION ................................................................................................................................ 12 4. POWER SPECTRAL DENSITY ........................................................................................................................... 13 4.1 STANDARD APPLICABLE ..................................................................................................................................... 13 4.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 13 4.3 TEST PROCEDURE .............................................................................................................................................. 13 4.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 13 5. DTS BANDWIDTH ................................................................................................................................................. 14 5.1 STANDARD APPLICABLE ..................................................................................................................................... 14 5.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 14 5.3 TEST PROCEDURE .............................................................................................................................................. 14 5.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 14 6. RF OUTPUT POWER ............................................................................................................................................ 15 6.1 STANDARD APPLICABLE ..................................................................................................................................... 15 6.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 15 6.3 TEST PROCEDURE .............................................................................................................................................. 15 6.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 15 7. FIELD STRENGTH OF SPURIOUS EMISSIONS ......................................................…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 59 TEST REPORT Reference No. ....................: WTH23X08177917W001 FCC ID ............................... .: 2BCTM-BDH200 Applicant .......................... .: Guangzhou Bonzn Power Technology Co.,Ltd. Address ............................ .: Floor 1,No. 3 Xiangshan Road,High-tech Development Zone,Guangzhou Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: Stick Logger Model No... ........................ .: BDH200 Series Standards ......................... .: FCC Part 15.247 Date of Receipt sample ... .: 2023-08-14 Date of Test....................... .: 2023-08-14 to 2023-08-30 Date of Issue .................... .: 2023-08-30 Test Report Form No. ...... . : WTX_Part 15_247W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Gala Wang Silin Chen Reference No.: WTH23X08177917W001 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 59 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................... 5 1.4 TEST FACILITY ...................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE .............................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 11 3. ANTENNA REQUIREMENT ................................................................................................................................. 12 3.1 STANDARD APPLICABLE ..................................................................................................................................... 12 3.2 EVALUATION INFORMATION ................................................................................................................................ 12 4. POWER SPECTRAL DENSITY ........................................................................................................................... 13 4.1 STANDARD APPLICABLE ..................................................................................................................................... 13 4.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 13 4.3 TEST PROCEDURE .............................................................................................................................................. 13 4.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 13 5. DTS BANDWIDTH ................................................................................................................................................. 14 5.1 STANDARD APPLICABLE ..................................................................................................................................... 14 5.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 14 5.3 TEST PROCEDURE .............................................................................................................................................. 14 5.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 14 6. RF OUTPUT POWER ............................................................................................................................................ 15 6.1 STANDARD APPLICABLE ..................................................................................................................................... 15 6.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 15 6.3 TEST PROCEDURE .............................................................................................................................................. 15 6.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 15 7. FIELD STRENGTH OF SPURIOUS EMISSIONS ......................................................…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 33 TEST REPORT Reference No. .................... : WTH23X08192045W FCC ID ................................ : 2BCTM-BDH200 Applicant ........................... : Guangzhou Bonzn Power Technology Co.,Ltd. Address ............................. : Floor 1,No. 3 Xiangshan Road,High-tech Development Zone,Guangzhou Manufacturer ..................... The same as Applicant Address ............................. The same as Applicant Product Name ................... : Stick Logger Model No.. .......................... : BDH200 Series Standards .......................... : FCC Part 2.1093 IEEE Std C95.1: 2019 IEEE Std C95.3: 2002 + Rev. 2008 Date of Receipt sample .... : 2023-08-31 Date of Test........................ : 2023-08-31 to 2023-09-01 Date of Issue ..................... : 2023-09-01 Test Report Form …

Text truncated - open the document above for the full version.