2BCUQ-W601WPortable Wi-Fi Phone

FanvilLinkTechnologyCo.,LTD A03,A08,3rdFloor,Building2,DaqianIndustrialPlant,Zone67,XingdongCommunity,Xin'anStreet, Bao'anDistrict,Shenzhen,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Jul.15,2024 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BCUQ-W601W FRN:0034227223 [FanvilLinkTechnologyCo.,LTD](“theapplicant”)certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. Sincerely, (Applicantsignature) (mengjiao.hu)

FanvilLinkTechnologyCo.,LTD A03,A08,3rdFloor,Building2,DaqianIndustrialPlant,Zone67,XingdongCommunity,Xin'anStreet, Bao'anDistrict,Shenzhen,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Jul.15,2024 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BCUQ-W601W FRN:0034227223 [FanvilLinkTechnologyCo.,LTD](“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing“covered” equipment. Sincerely, (Applicantsignature) (mengjiao.hu)

Fanvil Link Technology Co., LTD A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, China 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2BCUQ-W601W 2.911(d)(7) USA Designated Agent for Service of Process We, [Fanvil Link Technology Co., LTD] (“the applicant”) designate [ EMCTEK] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: EMCTEK Address:11788 Big Canyon Ln, San Diego CA 92131 USA FRN: 0033401829 Contact Name: Fang Liu Telephone No: / Email: [email protected] Applicant Company name: Fanvil Link Technology Co., LTD Address: A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen， China FRN：0034227223 Contact Name: Mengjiao Hu Telephone No:15089240223 Email: [email protected] Signature: Signature: Date: 7/10/2024 Date: NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 Fanvil Link Technology Co., LTD A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, China 2.911 (d)(7)USA Agent v1.2 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-communications-supply- chain-through-the

Fanvil Link Technology Co., LTD A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 15, 2024 Subject; Request for Confidentiality FCC ID: 2BCUQ-W601W To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.4 59, we are reques ting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure Software Security Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, × × × × × Signature: Name: mengjiao.hu Title: General Manager

Fanvil Link Technology Co., LTD A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, China Letter of Authorization Company: Fanvil Link Technology Co., LTD Address: A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street,Bao'an District, Shenzhen, China Product Name: Portable Wi-Fi Phone Model Number(s): W601W Product Description: Portable Wi-Fi Phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 15, 2024 Name: mengjiao.hu Title: General Manager Company: Fanvil Link Technology Co., LTD

FCC ID Label Location 10mm*20mm FCC ID: 2BCUQ-W601W

CALIBRATION DATA PROBE CALIBRATION DATA DIPOLE CALIBRATION DATA

Page 1 of 75 SAR Test Report Report No.: AGC14499240502FH01 FCC ID : 2BCUQ-W601W APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Wi-Fi Phone BRAND NAME : MODEL NAME : W601W APPLICANT : Fanvil Link Technology Co., LTD DATE OF ISSUE : Jul. 02, 2024 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC14499240502FH01 Page 2 of 75 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 02, 2024 Valid Initial Release Report No.: AGC14499240502FH01 Page 3 of 75 Test Report Applicant Name Fanvil Link Technology Co., LTD Applicant Address A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, China Manufacturer Name Fanvil Link Technology Co., LTD Manufacturer Address A03, A08, 3rd Floor, Building 2, Daqian Industrial Plant, Zone 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, China Factory Name N/A Factory Address N/A Product Designation Portable Wi-Fi Phone Brand Name Model Name W601W Series model N/A Different Description N/A EUT Voltage DC3.8V by battery Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 Date of receipt of test item May 24, 2024 Test Date Jun. 17, 2024 to Jun. 21, 2024 Report Template AGCRT-US-5G/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Reviewed By Bibo Zhang (Reviewer) Jul. 02, 2024 Reviewed By Calvin Liu (Reviewer) Jul. 02, 2024 Approved By Max Zhang (Authorized Officer) Jul. 02, 2024 Report No.: AGC14499240502FH01 Page 4 of 75 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 7 3.1. THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 7 3.2. COMOSAR E-FIELD PROBE .......................................................................................................................... 8 3.3. ROBOT .......................................................................................................................................................... 8 3.4. VIDEO POSITIONING SYSTEM .......................................................................................................................... 9 3.5. DEVICE HOLDER ............................................................................................................................................ 9 3.6. SAM TWIN PHANTOM ................................................................................................................................... 10 4. SAR MEASUREMENT PROCEDURE .............................................................................................................. 11 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 11 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 12 4.3. RF EXPOSURE CONDITIONS ......................................................................................................................... 14 5. TISSUE SIMULATING LIQUID ......................................................................................................................... 15 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 15 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 15 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 16 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 17 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 17 6.2. SAR SYSTEM CHECK ................................................................................................................................... 18 7. EUT TEST POSITION ...................................................................................................................................... 20 7.1. DEFINE TWO IMAGINARY LINES ON THE HANDSET ........................................................................................... 20 7.2. CHEEK POSITION ......................................................................................................................................... 21 7.3. TILT POSITION .............................................................................................................................................. 21 7.4. BODY WORN POSITION ................................................................................................................................ 22 8. SAR EXPOSURE LIMITS ............................................................................................................................... 23 9. TEST FACILITY .............................................................................................................................................. 24 10. TEST EQUIPMENT LIS…

Text truncated - open the document above for the full version.

东莞市一佳电子通讯科技有限公司 Dongguan YiJia Electronics Communication Technology Co.,Ltd. 规格承认书 SPECIFICATION FOR APPROVAL 日期 Date 2024/07/10 编号 File No 24071001 版本 Revision 1.0 客户 CUSTOMER: 客户料号 CUSTOMER NO: W601W 品名品名 PART NAME: Integral Antenna 供方料号 SUPPLIER NO: YJL01.106.065.301A 送样日期 Date: 送样数量Q‘TY: 客户确认CUSTOMER APPROVED BY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIER SIGNATURE APPROVALCHECKDESIGN add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong APPROVALCHECKDESIGN ChenGuoqiangXieLiChenXingyi YJ-RD-F04-A 承认书项目表 NO . 内容 （Contents） 页数 （Number of Page） 页码 （Page Code） 1 承认书封面（Spec Cover） 11 承认书封面（p） 2 承认书项目表（Spec Item ） 12 3 工程成品图（Drawing） 13 4 天线规格（Antenna Specification） 14 5 S参数测试（S Parameter ） 15 6 无源测试（Passive Test ） 36 ~ 8 7 方向图（Radiation Pattern ） 39 ~ 11 8 有源测试（Active Test ） 312 ~ 14 9 天线装配图（At P fil） 215 169 天线装配图（Antenna Profile） 215 ~ 16 10 材质证明（Material Certificate ） 2517 ~ 41 11 RoHS报告（RoHS Test Report ） **** add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong 12N/AN/AN/A 13--- Wiring area Solder joint zone 天线规格 Antenna Specification Electrical Properties Frequency 2.4-2.5GHz 5.15-5.85GHz Impedance50 Ohm Nominal V.S.W.R2.0 Max Gain 5.4 [email protected] 33dBi@5155 85GH G 3.3 [email protected] RadiationOmni-directional PolarizationLinear Physical Properties ConnectorNone Cable TypeNone Cable LengthNone Cable ColorNone add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Operating Temp.-40 ~ +85 ̊C Storage Temp / Humidity 25±5 ̊C / <70% Antenna Performance TestAntenna Performance Te s t AgilentAgilent E5071B S11 ParameterParameter Test // WiFi AntennaAntenna add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Antenna Passive TestAntenna Passive Te s t Z Y X X Z Y add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Passive Test For WiFi Antenna （ 2.4G ） FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 62.1-2.14.9 2410 61.9-2.14.9 2420 59.8-2.24.7 2430 60.3-2.24.8 2440 60.7-2.24.7 2450 64.1-1.95.0 2460 61.4-2.14.7 2470 64.6-1.95.3 2480 62.3-2.15.0 add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong 2490 64.3-1.95.4 2500 60.2-2.25.0 Passive Test For WiFi Antenna (5.8G) FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5150 54.0-2.72.4 5200 58.4-2.32.7 5250 56 72526 5250 56.7-2.52.6 5300 54.1-2.72.2 5350 55.3-2.62.2 5400 60.0-2.22.5 5450 57.6-2.42.3 5500 52.4-2.82.2 5550 57.5-2.43.0 5600 59.5-2.33.2 5650 52.4-2.83.1 5700 51.2-2.93.0 5750 58 62333 add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong 5750 58.6-2.33.3 5800 55.2-2.63.2 5850 54.1-2.73.3 Radiation Pattern For WIFI Antenna （ 2.4G ） 2400MHz 2450MHz 2500MHz add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Radiation Pattern For WIFI Antenna （ 5.8G ） 5500MHz 5150MHz 5850MHz add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Phi 0° Phi 90° Theta 90° add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong eta90 Antenna Active TestAntenna Active Te s t Z Y X X Z Y add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Active Test For WIFI Band Channel Data Rate TRP EIRP Data Rate TIS EIS 1 13.9 17.9-85.5 -89.5 WIFI 2.4G 802.11b 11Mbps11Mbps6 13.8 18.9-85.6 -89.6 11 13 818 3-86 2-90 2 11 13.818.3-86.2-90.2 36 12.9 18.5-72.4 -80.6 WIFI 5G 802.11a 6Mbps54Mbps100 12.9 19.3-72.6 -80.8 add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong 165 13.7 20.8-73.3 -80.7 Active Test For BT Band Channel TRP EIRPTISEIS 0 2.96.6 -86.8 -89.5 BT39 3.77.4 -86.4 -90.1 78 3177-86 7-90 4 add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong 3.17.786.790.4 DeviceDevice add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong WiFi Antenna add：Yuanfu Industrial Park, No.59, Muyu Road, Shatou Community, Chang'an Town, Dongguan, Guangdong Material safety data (MSDS) 1、 Item and manufacturer information page: 1 / 2 Item name: FPC antenna electroplated nickel and gold (flexible printed circuit) Other names: FPC nickel gold coating Recommended use and restricted use: communication products Name of manufacturer or supplier: Dongguan Xiaoge Electronic Technology Co., Ltd Address of manufacturer or supplier: 1 / 2 / F, Sanxing Road, Fenghuang Middle Road, Shajiao community, Humen Town, Dongguan City Emergency contact / Fax: 2、 Hazard identification data Hazard classification: other dangerous substances, acute toxic substances, grade 4 (swallowing, skin, inhalation) Label content: Symbols: other dangerous objects, exclamation marks Warning: warning Hazard warning message: harmful if swallowed, harmful if inhaled Hazard prevention measures: put the container in a well ventilated place; avoid contact with skin and eyes; in case of accide nt or discomfort, consult medical treatment immediately Other hazards:- 3、 Component identification data mixture Chinese and English Name: nickel CAS no.7440-02-0 percentage 98.95% Gold CAS no.7440-57-5 percentage 1% Brightener CAS no.6155-57-3 percentage 0.05% Synonymous Name: gold finger nickel gold layer Case No Composition of hazardous substances (percentage of components) 4、 First aid measures First aid methods for different exposure routes: Inhalation: - irritates respiratory tract Skin contact: wash the contact area with soap and water Eye contact: flush with plenty of water for more than 15 minutes and seek medical assistance Ingestion: drink plenty of water and seek medical assistance The most important symptom and harmful effect: irritant. Protection of first-aid personnel: wear class C protective equipment to implement first aid in s…

Text truncated - open the document above for the full version.

Page 1 of 83 FCC Test Report Report No.: AGC14499240502FR01 FCC ID : 2BCUQ-W601W APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Portable Wi-Fi Phone BRAND NAME : MODEL NAME : W601W APPLICANT : Fanvil Link Technology Co., LTD DATE OF ISSUE : Jul. 04, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC14499240502FR01 Page 2 of 83 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 04, 2024 Valid Initial Release Report No.: AGC14499240502FR01 Page 3 of 83 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour. ............................................................................. 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 24 7.4 Measurement Results ............................................................................................................................. 25 8. Conducted Band Edge and Out-of-Band Emissions ....................................…

Text truncated - open the document above for the full version.

Report No.: AGC14499240502FR01 Page 70 of 83 Test Graphs of Number of Hopping Frequency Test_Graph_BR_HOP_ANT1_NA_1Mbps_Number of Hopping Note: All mode rates are tested and evaluated, GFSK modulated DH5 mode is the worst case and documented in the report Report No.: AGC14499240502FR01 Page 71 of 83 11. Time of Occupancy (Dwell Time) Measurement 11.1 Provisions Applicable The maximum permissible time of occupancy is 400ms within a period of 400ms multiplied by the number of hopping channels employed. 11.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span = Zero span, centered on a hopping channel. 2. RBW shall be ≤ channel spacing and where possible RBW should be set >> 1 / T, where T is the expected dwell time per channel. 3. VBW ≥ RBW 4. Sweep time = As necessary to capture the entire dwell time per hopping channel 5. Detector = Peak 6. Trace mode = Free Run 7. Use the marker-delta function to determine the transmit time per hop. If this value varies with different modes of operation (data rate, modulation format, number of hopping channels, etc.), then repeat this test for each variation in transmit time. An oscilloscope may be used instead of a spectrum analyzer. The EUT shall show compliance with the appropriate regulatory limit for the number of hopping channels. A plot of the data shall be included in the test report. 11.3 Measurement Setup (Block Diagram of Configuration) 11.4 Measurement Result Test Data of Dwell Time Channel Time of Pulse for DH5 (ms) Number of hops in the period specified in the requirements Dwell Time (ms) Limit (ms) Pass or Fail 2402 2.885 24.0*4 276.960 400 Pass 2441 2.885 29.0*4 334.660 400 Pass 2480 2.884 34.0*4 392.224 400 Pass Report No.: AGC14499240502FR01 Page 72 of 83 Test Graphs of Dwell Time Test_Graph_BR_HOP_ANT1_NA_1Mbps_2402_Number of Busrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2402_Time per Burst Report No.: AGC14499240502FR01 Page 73 of 83 Test_Graph_BR_HOP_ANT1_NA_1Mbps_2441_Number of Busrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2441_Time per Burst Report No.: AGC14499240502FR01 Page 74 of 83 Test_Graph_BR_HOP_ANT1_NA_1Mbps_2480_Number of Busrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2480_Time per Burst Note: All mode rates are tested and evaluated, GFSK modulated DH5 mode is the worst case and documented in the report. Report No.: AGC14499240502FR01 Page 75 of 83 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail GFSK 1.041 0.69 Pass Report No.: AGC14499240502FR01 Page 76 of 83 Test Graphs of Number of Hopping Frequency Test_Graph_BR_HOP_ANT1_NA_1Mbps_Hopping Separation Note: All mode rates are tested and evaluated, GFSK modulated DH5 mode is the worst case and documented in the report. Report No.: AGC14499240502FR01 Page 77 of 83 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC14499240502FR01 Page 78 of 83 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test progr…

Text truncated - open the document above for the full version.