2BCWG-LY9960Rpet Wireless Charging Mouse Pad

26750 RPET Mousepad with Wireless Charger User Manual Product Overview: Type C Port Specica�ons: Input: 5V/2A, 9V/2A Output: 9V/1.1A Power: 5W,7.5W,10W 1m cable with Type-C connector is included. Opera�on: 1. Connect the Type C cable to the Type C port on the wireless charger and the other end of the cable into a USB port or into a USB AC adapter. 2. Place your device on top of the wireless charger, ensuring that it is face up and centrally posi�oned. Note: If your phone has a protec�ve case you may need to remove it for a successful connec�on when using the wireless charger. Warnings: MADE IN CHINA 70mm 100mm 70mm 1. Do not expose this product to rain or damp condi�ons. 2. Prevent this ítem from falling as it could cause serious damage. 3. Do not dismantle, repair or modify this product by yourself, contact an authorized specialist. 4. In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire. 5. Clean it with a dry cloth. 6. Do not place this ítem near sources of heat or expose to direct sunlight. 7. Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit. 8. To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process. 9. Do not use mobile devices with a metal case. It is recommended to read this user manual carefully and keep it for future reference. This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separa�on between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifica�ons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC/ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

NINGBO LEYOND IMP. & EXP. CO., LTD. Section 2.911(d)(5)(i) Certification – Equipment Type Company name: NINGBO LEYOND IMP. & EXP. CO., LTD. Address: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000, China Product Name: Rpet Wireless Charging Mouse Pad FCC ID: 2BCWG-LY9960 Model(s): LY9960/26750 2.911(d)(5)(i) Equipment Type We, [NINGBO LEYOND IMP. & EXP. CO., LTD.] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Name: Tina xu Date: 2023-09-21 Title and Company name: manager and NINGBO LEYOND IMP. & EXP. CO., LTD. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

NINGBO LEYOND IMP. & EXP. CO., LTD. Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: NINGBO LEYOND IMP. & EXP. CO., LTD. Address: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000, China Product Name: Rpet Wireless Charging Mouse Pad FCC ID: 2BCWG-LY9960 Model(s): LY9960/26750 2.911(d)(5)(ii) Applicant filing We, [NINGBO LEYOND IMP. & EXP. CO., LTD.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature: Name: Tina xu Date: 2023-09-21 Title and Company name: manager and NINGBO LEYOND IMP. & EXP. CO., LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

NINGBO LEYOND IMP. & EXP. CO., LTD. Section 2.911(d)(7) USA Agent for Service of Process Company name: NINGBO LEYOND IMP. & EXP. CO., LTD. Address: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000, China Product Name: Rpet Wireless Charging Mouse Pad FCC ID: 2BCWG-LY9960 Model(s): LY9960/26750 2.911(d)(7) USA Designated Agent for Service of Process We, [NINGBO LEYOND IMP. & EXP. CO., LTD.] designate [Baihetian Innovative Solutions] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email add ress for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. NINGBO LEYOND IMP. & EXP. CO., LTD. USA Agent Company name: Baihetian Innovative Solutions Address: 6837 Chase Rd, Dearborn, MI 48126, USA FRN: 0033401605 Contact Name: Kenneth Young Telephone No: 313-395-3113 Email: [email protected] Applicant Company name: NINGBO LEYOND IMP. & EXP. CO., LTD. Address: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000,China FCC Grantee Code: 2BCWG Contact Name: manager Telephone No: +86-0574-87103883 Email: [email protected] Signature: Title: Manager Signature: Title: manager Date: 2023-09-21 Date: 2023-09-21 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

NINGBO LEYOND IMP. & EXP. CO., LTD. Agent Authorization Company: NINGBO LEYOND IMP. & EXP. CO., LTD. Address: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000,China Product Name: Rpet Wireless Charging Mouse Pad Model Number(s): LY9960/26750 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-09-21 Name: Tina xu Title: manager Company: NINGBO LEYOND IMP. & EXP. CO., LTD.

NINGBO LEYOND IMP. & EXP. CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-09-21 Subject; Request for Confidentiality FCC ID: 2BCWG-LY9960 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Tina xu Title: manager

Page 1 of 5 Test Model No.: LY9960/26750 Page 2 of 5 Page 3 of 5 Page 4 of 5 Page 5 of 5

51.40 mm 25.00 m m 2BCWG-LY9960

Label location

Page 1 of 2 Test Model No.: LY9960/26750 Page 2 of 2

Global United Technology Services Co., Ltd. Report No.: GTS2023090091F02 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 9 RF Exposure Report Applicant: NINGBO LEYOND IMP. & EXP. CO., LTD. Address of Applicant: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000,China Equipment Under Test (EUT) Product Name: Rpet Wireless Charging Mouse Pad Model No.: LY9960/26750 FCC ID: 2BCWG-LY9960 Applicable standards : FCC CFR Title 47 Part 1 §1.1307 FCC CFR Title 47 Part 1 §1.1310 FCC CFR Title 47 Part 2 §2.1091 KDB 680106 D01 RF Exposure Wireless Charging App v03r01 Date of sample receipt: September 07, 2023 Date of Test: September 08-14, 2023 Date of report issued: September 14, 2023 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2023090091F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 9 2 Version Version No. Date Description 00 September 14, 2023 Original Prepared By: Date: September 14, 2023 Project Engineer Check By: Date: September 14, 2023 Reviewer Report No.: GTS2023090091F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 9 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 GENERAL INFORMATION ...................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST FACILITY .................................................................................................................................... 5 4.3 TEST LOCATION ................................................................................................................................. 5 4.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 5 4.5 DEVIATION FROM STANDARDS ............................................................................................................. 5 4.6 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 5 4.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 5 5 REQUIREMENTS ..................................................................................................................................... 6 6 TEST SETUP PHOTO .............................................................................................................................. 9 Report No.: GTS2023090091F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 9 4 General Information 4.1 General Description of EUT Product Name: Rpet Wireless Charging Mouse Pad Model No.: LY9960/26750 Serial No.: N/A Test sample(s) ID: GTS2023090091-1 Sample(s) Status Engineer sample Operation Frequency: 110kHz~205kHz Modulation type: ASK Antenna Type: Inductance Coil Antenna Antenna gain: 0dBi (Max) Power supply: USB input: DC 5V Wireless charging: DC 5V, 1A/1.5A/2A, 5W/7.5W/10W Remark: 1. Antenna gain information provided by the customer 2. The relevant information of the sample is provided by the entrusting company, and the laboratory is not responsible for its authenticity. Report No.: GTS2023090091F02 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 9 4.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: ● FCC—Registration No.: 381383 Designation Number: CN5029 Global United Technology Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in files. ● ISED—Registration No.: 9079A CAB identifier: CN0091 The 3m Semi-anechoic chamber of Global United Technology Services Co., Ltd. has been registered by Certification and Engineering Bureau of ISED for radio equipment testing ● NVLAP (LAB CODE:600179-0) Global United Technology Services Co., Ltd., is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP). 4.3 Test Location All tests were performed at: Global United Technology Services Co., Ltd. Address: No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518…

Text truncated - open the document above for the full version.

深圳市宸兴电子技术有限公司 ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenzhenChenxingElectronicTechnologyCo,Ltd. Address：Room510 ，BuildingNO.4，Xinkechengindustrialpark,51 DabaoRoadBaoanDistrictShenzhenCity 第 1 页 产 品 规 格 书 PRODUCTSPECIFICATIONFORAPPROVAL 二维四象 PowerTransmitterA11 客 户 名 称： CUSTOMER 产 品 名 称： PRODUCT NAME 天线增益： Max gain： 产 品 规 格： PRODUCT SPEC Inductance:6. 3uH ±10% Shieldingspec: 50 *5.3* 1 with two grooves Silk coveredwire spec：2 UEW/1550.08* 105* 10Ts SegmentLength：30 mm Doubleside Type 日期： DATE 2023/09/18 版 本 型 号： VERSION REV 1.0 版本 Revision 变更内容 ModifiedContent 责任人 Principle 日期 Date 备注 Note RE V 1.0首次发布薛 磊20 23 -9-18 制定/PREPAREDBY审核/CHECKEDBY核准/APPROVEDBY 李小云周小菊 客户认可签名及盖章 Authorizedsignature& companychop 附上的是产品规格书，有任何疑问，请及时反馈给我们，谢谢 ! 0dbi 深圳市宸兴电子技术有限公司 ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenzhenChenxingElectronicTechnologyCo,Ltd. Address：Room510，BuildingNO.4，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 第 2 页 产品规格 SPECIFICATION 一、MechanicalSpecification: ShieldingOuter Diameter(A) 49.5±0.5mm ShieldingInner Diameter(G) 5±0.3mm CoilOuterDiameter （B） 42±1mm CoilInnerDiameter （C） 20.5±0.5mm TotalThickness（D）<2.3mm SegmentLength（E）30mm±3mm PinLength（F） 3 ± 2mm Shielding Thickness 0.95±0.05mm ShieldingShape Circlewithtwo grooves AdhesiveTapeDoublesideType 深圳市宸兴电子技术有限公司 ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenzhenChenxingElectronicTechnologyCo,Ltd. Address：Room510，BuildingNO.4，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 第 3 页 二、Schematic: 三、CoilParameter: 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection SF 2UEW/1550.08*105 10TsCCW ELECTRICALSPECIFICATIONS 四、ElectricalSpecification： 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS IND.S-F 6.3uH±10% 100KHz/1.0VLCZMETER1062B

Global United Technology Services Co., Ltd. Report No.: GTS2023090091F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 18 TEST REPORT Applicant: NINGBO LEYOND IMP. & EXP. CO., LTD. Address of Applicant: 24th Floor, No.1 Building, No.55 Yidu Cultural Plaza, Liyuan North Road, Ningbo, 315000,China Equipment Under Test (EUT) Product Name: Rpet Wireless Charging Mouse Pad Model No.: LY9960/26750 FCC ID: 2BCWG-LY9960 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Date of sample receipt: September 07, 2023 Date of Test: September 08-14, 2023 Date of report issued: September 14, 2023 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2023090091F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 18 2 Version Version No. Date Description 00 September 14, 2023 Original Prepared By: Date: September 14, 2023 Project Engineer Check By: Date: September 14, 2023 Reviewer Report No.: GTS2023090091F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 18 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 6 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 6 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 6 5.6 TEST FACILITY .................................................................................................................................... 6 5.7 TEST LOCATION ................................................................................................................................. 6 5.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 8 7.1 ANTENNA REQUIREMENT: .................................................................................................................... 8 7.2 CONDUCTED EMISSIONS ..................................................................................................................... 9 7.3 RADIATED EMISSION METHOD ........................................................................................................... 12 7.4 20DB OCCUPY BANDWIDTH .............................................................................................................. 17 8 TEST SETUP PHOTO ............................................................................................................................ 18 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 18 Report No.: GTS2023090091F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 18 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass AC Power Line Conducted Emission 15.207 Pass Radiated Emission 15.209 Pass 20dB Bandwidth 15.215 Pass Pass: The EUT complies with the essential requirements in the standard. 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz 3.44dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Report No.: GTS2023090091F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Gua…

Text truncated - open the document above for the full version.

Report No.: GTS2023090091 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 5 Product Name: Rpet Wireless Charging Mouse Pad Test Model No.: LY9960/26750 Test Setup Photo Radiated Emission Report No.: GTS2023090091 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 5 Conducted Emission RF Exposure Report No.: GTS2023090091 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 5 Report No.: GTS2023090091 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 5 Report No.: GTS2023090091 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 5 ------End------