2BCWP-KORAV3Scanner

Size-Matching Made Easy™ Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September, 15, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BCWP-KORAV3 BodiData, Inc (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Albert J Charpentier For BodiData, Inc Size-Matching Made Easy™ Rev 1/26/2023 (APPLICANT’S COMPANY LETTERHEAD) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: mm-dd-yyyy Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: (place FCC ID here) [Insert applicant name] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name)

Size-Matching Made Easy™ ●Saratoga,CA ● St Petersburg, FL ● Paoli,PA ● Halifax, NS ● Ghent, BE● HCMC, VN ● ● 610-724-4770● [email protected]● Albert Charpentier Co-Founder & Chief Architect - Hardware Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-15-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BCWP-KORAV3 BodiData, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0034246488 Name: BodiData, Inc. Address: 183 West Lancaster Ave, Lower Suite, Paoli, Pa, 19301 Contact Person: Albert J Charpentier Tel.: 610-724-4770 Email: [email protected] Sincerely, Albert J Charpentier Chief Hardware Architect

Size-Matching Made Easy™ ●Saratoga,CA ● St Petersburg, FL ● Paoli,PA ● Halifax, NS ● Ghent, BE● HCMC, VN ● ● 610-724-4770● [email protected]● Albert Charpentier Co-Founder & Chief Architect - Hardware March 7, 2024 This document attest that the Kora BodiData Scanning device is rely solely on Bluetooth LE (BLE) The Wi-Fi modes, other Bluetooth modes and all other radio communication options are locked out by the firmware configurations in the ESP. This cannot be modified by the user. Sincerely, Albert J Charpentier Chief Hardware Architect [email protected] 610 724 4770

September 15, 2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Albert J Charpentier Senior Engineer BodiData, Inc

Size -Matching Made Easy™ ●Saratoga,CA ● St Petersburg, FL ● Paoli,PA ● Halifax, NS ● Ghent, BE● HCMC, VN ● ● 610-724-4770● [email protected]● Albert Charpentier Co- Founder & Chief Architect - Hardware September 15, 2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: Long-Term Confidentiality Request for KORA3 ID#2BCWP-KORAV3 To Whom It May Concern: This letter serves as an official request for confidentiality under § 0.457(d) and § 0.459 of CFR 47.We have requested that the following documents required to be submitted with this application be permanently withheld from public review. •Block Diagram •Schematics •Theory of Operation •Parts List/BOM These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Albert J Charpentier Chief Hardware Architect

Size-Matching Made Easy™ ●Saratoga,CA ● St Petersburg, FL ● Paoli,PA ● Halifax, NS ● Ghent, BE● HCMC, VN ● ● 610-724-4770● [email protected]● Albert Charpentier Co-Founder & Chief Architect - Hardware September 15, 2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short-Term Confidentiality Request for: ID: 2BCWP-KORAV3 To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, BodiData, Inc requests Short-Term Confidentiality for the following exhibits of this application for a period of 180 days after grant is issued: • Test setup photos • External photos • Internal photos • User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which manufacturer/applicant considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, manufacturer/applicant feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Grantee will not market or distribute product during the Short-Term Confidentiality period requested. When the device is ready to be marketed the grantee will inform the TCB to release the Short-Term Confidentiality. Please contact me if there is any information you may need. Sincerely, Albert J. Charpentier Chief Hardware Architect

PCB Embedded 60Ghz antenna datasheet Antenna Characteristics The following are antenna characteristics, based on the simulation of a single antenna over an infinite ground plane: Table 1: Antenna and RF Characteristics Parameter Value Comment Gain 4 dBi @62 GHz At 0 ̊ Elevation, 0 ̊ Azimuth Antenna -5dB beamwidth 160 deg. @62 GHz (E-plane) 120 deg. @62 GHz (H-plane) Polarization Linear Figure 1: PCB embedded antenna simulated gain, using CST 3D EM solver. Figure 21: Antenna Pattern

Toll-free: (866) 311-3268 Fax: (480) 926-3598 www.ComplianceTesting.com [email protected] P2380001_FCC_Part 1.1310_Rev 2.0 Page 4 of 4 Test Report Prepared for: Bodidata Model: Kora Description: Handheld device used to scan body giving 3d image for clothing. Serial Number: N/A FCC ID: 2BCWP-KORAV3 To FCC Part 1.1310 Date of Issue: March 7, 2024 On the behalf of the applicant: Bodidata 4905 34th St S, Unit 296 St. Petersburg, FL, 33711 Attention of: Albert Charpentier, Chief Architect Ph: (610)724-4770 E-Mail: [email protected] Prepared By Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p2380001 John Michalowicz Project Test Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing All results contained herein relate only to the sample tested P2380001_FCC_Part 1.1310_Rev 2.0 Page 4 of 4 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 March 7, 2024 John Michalowicz Original Document 2.0 April 22, 2024 John Michalowicz Removed simultaneous transmission P2380001_FCC_Part 1.1310_Rev 2.0 Page 4 of 4 ANAB Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to the joint ISO-ILAC-IAF Communiqué dated January 2009). The tests results contained within this test report all fall within our scope of accreditation, unless noted below. Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. FCC Site Reg. #349717 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A EUT Description Model: Kora Description: Handheld device used to scan body giving 3d image for clothing. Firmware: 0.3.00 Software :Kora Scanner Serial Number: N/A Additional Information: The largest dimension of the antenna is 2.08 mm far-field boundary distance is 2D2/λ. Which equals 0.0018 m. The EUT does not transmit simultaneously. P2380001_FCC_Part 1.1310_Rev 2.0 Page 4 of 4 Duty cycle correction = 10log(Ton/T) On time = 13.1 * 3 = 39.3 ms 39.3/230 = 0.17087 10*Log (0.17087) = 7.67dB The peak EIRP measured was 9.03 dBm The time-averaged power is 9.03 – 7.67 = 1.36dBm The closest distance between the radiating elements of the 60 GHz radio and the edge of the device is more than 1.5cm P2380001_FCC_Part 1.1310_Rev 2.0 Page 4 of 4 MPE Evaluation This is a portable device used in Uncontrolled Exposure environment. Limits Controlled Exposure 47 CFR 1.1310 Table 1, (A) 0.3-3.0 MHz: Limit [mW/cm²] = 100 3.0-30 MHz: Limit [mW/cm²] = (900/f²) 30-300 MHz: Limit [mW/cm²] = 1.0 300-1500 MHz: Limit [mW/cm²] = f/300 1500-100,000 MHz Limit [mW/cm²] = 5 Limits Uncontrolled Exposure 47 CFR 1.1310 Table 1, (B) 0.3-1.234 MHz: Limit [mW/cm²] = 100 1.34-30 MHz: Limit [mW/cm²] = (180/f²) 30-300 MHz: Limit [mW/cm²] = 0.2 300-1500 MHz: Limit [mW/cm²] = f/1500 1500-100,000 MHz Limit [mW/cm²] = 1.0 Test Data 63 GHz radio: Formula S = P*G / 4*PI*r 2 Power Density (S) mw/cm 2 Power mW (P) Neumaric Gain (G) Distance (r 2 ) cm Duty Cycle 0.7424797071 9.33 1 1 1 2.4 BLE radio: Formula S = P*G / 4*PI*r 2 Power Density (S) mw/cm 2 Power mW (P) Neumaric Gain (G) Distance (r 2 ) cm Duty Cycle 0.6684704759 1 2.1 0.5 1 Note: Max output power value is obtained from associated report. And grant of BLE module The EUT is exempt from routine evaluation. END OF TEST REPORT

P2380001_FCC_Part 15.255_Rev 1.0 Page 1 of 21 Test Report Prepared for: Bodidata Model: Kora Serial Number: N/A Project No: p2380001 Test Results: Pass To FCC Part 15.255 and RSS-210: Issue 10 (December 2019) Date of Issue: January 23, 2024 On the behalf of the applicant: Bodidata 4905 34th St S, Unit 296 St. Petersburg, FL, 33711 Attention of: Albert Charpentier, Chief Architect Ph: (610)724-4770 E-Mail: [email protected] Prepared By: Compliance Testing, LLC Mesa, AZ 85204 (480) 926-3100 phone / (480) 926-3598 fax www.compliancetesting.com ANAB Cert#: AT-2901 FCC Site Reg. #US2901 ISED Site Reg. #2044A-2 Reviewed / Authorized By: John Michalowicz, Test Engineer This report may not be reproduced, except in full, without written permission from Compliance Testing. All results contained herein relate only to the sample tested. All samples were selected by the customer. P2380001_FCC_Part 15.255_Rev 1.0 Page 2 of 21 Test Results Summary Specification Test Name Pass, Fail, N/A Comments 15.255 (e) RSS-210 Annex J Output Power Pass 15.255 (e) RSS-GEN 4.6.1 Occupied Bandwidth Pass 15.255 (c) RSS-210 Annex J Radiated Spurious` Pass 15.255 (f) RSS-210 Annex J Frequency Stability Pass 15.207 RSS-GEN 7.1.4 AC Powerline Conducted Emission N/A The EUT does not connect to the AC mains while in operation References/Methods Description ANSI C63.4-2014 Method and Measurements of Radio-Noise Emissions from low-Voltage Electrical and Electronic Equipment in the range 9kHz to 40GHz. ANSI C63.10:2020 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices 558074 D01 15.247 Meas Guidance v05r02 Guidance for Compliance Measurements on DTS, FHSS, and Hybrid System Devices Operating Under Section 15.247 of the FCC Rules ISO/IEC 17025:2017 General requirements for the Competence of Testing and Calibrations Laboratories Standard Engineering Practices Unless otherwise indicated, the procedures contained in ANSI C63.10 and ANSI C63.4 were observed during testing. Prior to testing, the EUT was tuned up in accordance with the manufacturer’s alignment procedures. All external gain controls were maintained at the position of maximum and/or optimum gain throughout the testing. Measurement results, unless otherwise noted, are worst case measurement. Standard Test Conditions and Engineering Practices Unless otherwise indicated in the specific measurement results, the ambient temperature was maintained within the range of 10º to 40ºC (50º to 104ºF) and the relative humidity levels were in the range of 10% to 90%. Environmental Conditions Temperature (ºC) Humidity (%) Barometric Pressure (mbar) 21.2 – 22.7 27.1 – 32.5 961 - 972 P2380001_FCC_Part 15.255_Rev 1.0 Page 3 of 21 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 January 23, 2024 John Michalowicz Original Document P2380001_FCC_Part 15.255_Rev 1.0 Page 4 of 21 Table of Contents Description Page TEST RESULTS SUMMARY .................................................................................................................................................. 2 EUT DESCRIPTION .............................................................................................................................................................. 7 TEST SETUP AND MODES OF OPERATION .......................................................................................................................... 8 RADIATED OUTPUT POWER ............................................................................................................................................... 9 OCCUPIED BANDWIDTH................................................................................................................................................... 12 RADIATED SPURIOUS EMISSIONS .................................................................................................................................... 14 FREQUENCY STABILITY ..................................................................................................................................................... 19 TEST EQUIPMENT UTILIZED ............................................................................................................................................. 20 MEASUREMENT UNCERTAINTY ....................................................................................................................................... 21 P2380001_FCC_Part 15.255_Rev 1.0 Page 5 of 21 ILAC / A2LA Compliance Testing, LLC, has been accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer joint ISO-ILAC-IAF Communiqué dated January 2009) The tests results contained within this test report all fall within our scope of accreditation, unless noted below. Please refer to http://www.compliancetesting.com/labscope.html for current scope of accreditation. Testing Certificate Number: 2152.01 FCC Site Reg. #349717 IC Site Reg. #2044A-2 Non-accredited tests contained in this report: N/A P2380001_FCC_Part 15.255_Rev 1.0 Page 6 of 21 The applicant has been cautioned as to the following 15.21 - Information to User The user’s manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.27(a) - Special Accessories Equipment marked to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However…

Text truncated - open the document above for the full version.