2BCYB-0003743NAIL DRILL

Description: Wireless charger for smartphones under the Ql-standard. Easy to charge your phone without cables, just put your phone on the charging plate. Specifications: Input: According to the printing on the back of the charging plate. Input: DC5V-2A Output: DC5V-1A Working Frequency: 110KHZ-220KHZ Operating Temperature Range: -0~45°C Storage Temperature Range: -10 ~50°C Storage Humidity: 45% ~ 85% RH Compatible with the Ql-standard. Package contents: Wireless charging plate Adapter or Power cable Power supply: The charger is recommended to power by a qualified AC adapter. Operation: Connect the wireless charger to an outlet such as a qualified AC adapter, then a Led light is lit. Put your phone on the charging plate and the battery starts to charge, the Ledlight blinks during charging. If the phone dessn't start to charge,please try to reposition it. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired FCC Warning operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user 's authority to operate the equipment. Refer to KDB 784748 Anner A section A.5: (a) Max. Electric Field Emissions: 6 .06V/m Max. Magnetic Field Emissions : 0.54A/m (b) The maintenance of the system is the responsibility of the manufacturer. (c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible. FCC ID: 2BCYB-0003743

BELMAXLIMITED B403.235#,LIGUANGRD,LISHUITOWN,FOSHAN,GUANGDONG528000,CHINA Date:2023-10-07 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing SUBJECT:FCCApplicationforFCCID:2BCYB-0003743 ToWhomItMayConcern: BELMAXLIMITEDcertifiesthattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, Signatory [JackLuo,Salesmanager]

BELMAXLIMITED B403.235#,LIGUANGRD,LISHUITOWN,FOSHAN,GUANGDONG528000,CHINA Date:2023-10-07 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing SUBJECT:FCCApplicationforFCCID:2BCYB-0003743 ToWhomItMayConcern: BELMAXLIMITEDcertifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedon theCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asanentityproducing “covered”equipment. Sincerely, Signatory [JackLuo,Salesmanager]

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ĞĂĞŶƚĞŶŽ 7LWOH6DOHV PDQDJHU7LWOH'LUHFWRU RI 5HJXODWRU\ $IIDLUV

BELMAXLIMITED B403.235#,LIGUANGRD,LISHUITOWN,FOSHAN,GUANGDONG528000,CHINA Date:2023-10-07 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 SUBJECT:FCCApplicationforFCCID:2BCYB-0003743 ConfidentialityRequest Towhomitmayconcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,wearerequestingthe Commissiontowithholdthefollowingattachment(s)asconfidentialdocumentsfrompublicdisclosureindefinitely. ☒ BlockDiagram ☐ Tune-UpInformation ☒ OperationalDescription ☐ SecurityInformation ☒ Schematics ☐ SoftwareDefinedRadio(SDR)Information ☐ PartsList Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoits competitors. Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulationsinTitle47CFR §2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthatbusinesssensitiveinformation remainsconfidentialuntiltheactualmarketingofnewlyauthorizeddevices,werequestShortTermConfidentiality ofthefollowingattachment(s); ☐ ExternalPhotos ☐ TestSetupPhotos ☐ InternalPhotos ☐ UserManual ☐For45days,pursuanttoPublicNoticeDA04-1705. or ☐For180dayspursuanttoKDB726920D01. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthisapplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, Signatory [JackLuo,Salesmanager]

BELMAXLIMITED B403.235#,LIGUANGRD,LISHUITOWN,FOSHAN,GUANGDONG528000,CHINA Date:2023-10-07 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 SUBJECT:FCCApplicationforFCCID:2BCYB-0003743 POWEROFATTORNEY ToWhomItMayConcern: We,theundersigned,herebyauthorizeWaltekTestingGroup(Shenzhen)Co.,Ltd.JandySoonourbehalf,to applytotheFederalCommunicationsCommissiononourequipment.AnyandallactscarriedoutbyWaltek TestingGroup(Shenzhen)Co.,Ltd.JandySoonourbehalfshallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,BELMAXLIMITEDarenot subjecttoadenialoffederalbenefitspursuanttoSection5301oftheAnti-DrugActof1988,21USC853a,and nopartytotheapplicationissubjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, Signatory [JackLuo,Salesmanager]

Reference No.: WTF23X08181041W001/002 Page 2 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 1 Reference No.: WTF23X08181041W001/002 Page 3 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 2 EUT View 3 Reference No.: WTF23X08181041W001/002 Page 4 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 4 EUT View 5 Reference No.: WTF23X08181041W001/002 Page 5 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 6

Reference No.: WTF23X08181041W001/002 Page 1 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2BCYB-0003743 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTF23X08181041W001/002 Page 6 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Solder Board-Component View 8 Reference No.: WTF23X08181041W001/002 Page 7 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 9 Antenna View Coil Antenna

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 13 TEST REPORT Reference No. ................... .: WTF23X08181041W002 FCC ID ............................... .: 2BCYB-0003743 Applicant .......................... .: BELMAX LIMITED Address ............................ .: B403.235#,LIGUANG RD,LISHUI TOWN,FOSHAN,GUANGDONG,CHINA. Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: NAIL DRILL Model No... ........................ .: BM1609 Standards ......................... .: KDB 680106 D01 V03 Date of Receipt sample ... .: 2023-08-17 Date of Test....................... .: 2023-08-17 to 2023-09-11 Date of Issue .................... .: 2023-09-11 Test Report Form No. ...... . : WTX_KDB 680106_D01_V03W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Gala Wang Silin Chen Reference No.: WTF23X08181041W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 13 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 AUXILIARY EQUIPMENT LIST AND DETAILS ........................................................................................................... 5 1.3 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 6 2. RF EXPOSURE TEST REPORT ............................................................................................................................ 7 2.1 STANDARD APPLICABLE ......................................................................................................................................... 7 2.2 TEST CONDITIONS .................................................................................................................................................. 7 2.3 TEST PROCEDURE ................................................................................................................................................... 8 2.4 TEST RESULT.......................................................................................................................................................... 9 2.5 MEASUREMENT UNCERTAINTY ............................................................................................................................ 11 2.6 TEST PHOTOS ....................................................................................................................................................... 12 APPENDIX PHOTOGRAPHS ................................................................................................................................... 13 Reference No.: WTF23X08181041W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 3 of 13 Report version Version No. Date of issue Description Rev.00 2023-09-11 Original / / / Reference No.: WTF23X08181041W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 4 of 13 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) General Description of EUT Product Name: NAIL DRILL Trade Name: BELMAX Model No.: BM1609 Adding Model(s): BM1615, BM1617, BM1623, BM1625, BM1630, BM1631, BM1632, BM1633, BM1634, BM1635, BM1636, BM1637, BM1638, BM1639, BM1640, BM1641, BM1642, BM1643, BM1644, BM1645, BM1646 Battery Capacity / Note: The test data is gathered from a production sample, provided by the manufacturer. The appearance of others models listed in the report is different from main-test model BM1609, but the circuit and the electronic construction do not change, declared by the manufacturer. Technical Characteristics of EUT Frequency Range: 110-220kHz Modulation Type: / Antenna Type: Coil Antenna Rated Voltage: Input: DC5V Output: DC5V Rated Current: Input: 2A Output: 1A Rated Power: Output: 5W Reference No.: WTF23X08181041W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 5 of 13 1.2 Auxiliary Equipment List and Details Auxiliary Equipment List and Details Description Manufacturer Model Serial Number Adapter HOLOTO ADS-6RA-06 -05050EPCU / EUT Cable List and Details Cable Description Length (M) Shielded/Unshielded With Core/Without Core USB Cable 1.0 Unshielded Without Ferrite Reference No.: WTF23X08181041W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 6 of 13 1.3 Test Equipment List and Details Description Manufacturer Model Serial No. Cal Date Due Date ELECTRIC AND MAGNETIC FIELD ANALYZER Narda EHP-200AC 180ZX10226 2021-05-20 2024-05-19 Note: The deviation response is 0.8dB. Reference No.: WTF23X08181041W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 7 of 13 2. RF Exposure Test Report 2.1 Standard Applicable According to§1.1310 system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. 2.2 Test Conditions Test Mode Description Remark Power Supply Mode TM1 Wireless Charging Output 5W Input: DC5V 2A Note: The EUT was tested with empty load, half load, …

Text truncated - open the document above for the full version.

一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A B C D E F G 95mm±1 7mm±0.5 64mm±1 20mm±0.5 20mm±1 5mm±0.2 9mm±0.5

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 25 TEST REPORT Reference No. ................... .: WTF23X08181041W001 FCC ID ............................... .: 2BCYB-0003743 Applicant .......................... .: BELMAX LIMITED Address ............................ .: B403.235#,LIGUANG RD,LISHUI TOWN,FOSHAN,GUANGDONG,CHINA. Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: NAIL DRILL Model No... ........................ .: BM1609 Standards ......................... .: FCC Part 15C Date of Receipt sample ... .: 2023-08-17 Date of Test....................... .: 2023-08-17 to 2023-09-11 Date of Issue .................... .: 2023-09-11 Test Report Form No. ...... . : WTX_Part 15CW Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Gala Wang Silin Chen Reference No.: WTF23X08181041W001 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 25 ABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND OPERATION MODE ...................................................................................................................... 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 10 3. RF EXPOSURE ....................................................................................................................................................... 11 3.1 STANDARD APPLICABLE ....................................................................................................................................... 11 3.2 TEST RESULT........................................................................................................................................................ 11 4. ANTENNA REQUIREMENT ................................................................................................................................ 12 4.1 STANDARD APPLICABLE ....................................................................................................................................... 12 4.2 EVALUATION INFORMATION ................................................................................................................................ 12 5. CONDUCTED EMISSIONS .................................................................................................................................. 13 5.1 TEST PROCEDURE ................................................................................................................................................. 13 5.2 BASIC TEST SETUP BLOCK DIAGRAM ................................................................................................................... 13 5.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 13 5.4 TEST RECEIVER SETUP ......................................................................................................................................... 14 5.5 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 14 6. FIELD STRENGTH OF SPURIOUS EMISSIONS ............................................................................................. 17 6.1 STANDARD APPLICABLE ....................................................................................................................................... 17 6.2 TEST PROCEDURE ................................................................................................................................................. 17 6.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................ 18 6.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 19 6. REFERENCE MEASUREMENT AT OPEN FIELD SITE ................................................................................................... 19 6.5 SUMMARY OF TEST RESULTS/PLOTS ...............................................................................................…

Text truncated - open the document above for the full version.

Reference No.: WTF23X08181041W001/002 Page 8 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Conducted Emission Test Setup Radiation Emission Test Setup (Below 30MHz) Reference No.: WTF23X08181041W001/002 Page 9 of 9 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Radiation Emission Test Setup (30MHz to 1GHz) ***** END OF REPORT *****