2BCYK-M001Mist

Size: 80*80mm Instructions 3.1 Find items at close range- Play sound function for the paired Mist, within the short range of the owner's Apple device, you can click “Play Sound” in the Find My app, or say “Hey Siri, Find my wallet” to play sound, and the device will play sound to indicate the location. If it’s hiding nearby, such as under a cupboard or in the next room, you can easily follow the sound to find it. 3.2 Mist is away from the owner The owner can see the location of the lost Mist on Apple device, navigate by the map to find Mist and items. 3.3 Lost Mode- Find thing easier Mist can be set as Lost mode. Open the "Find My" app, select and added "Mist", click on the "Lost mode", following the instruction of the app, enter the phone number, then setting is successful. In Lost Mode,You'll automatically get a notification when it's detected by other devices in the Find My network. So if others pick up your Bluehive Item Finder, they can know how to contact you by following the learn more instructions in Find My app. People nearby also can identify this lost Mist, and get the contact info if you have set in lost mode, and send a message to the owner, help the owner find the lost items. Find My Network will help you find your belongings when they are left behind, Bluehive Item Finder will send out a secure Bluetooth signal that can be detected by nearby iOS devices in Find My Network, these devices send the location of your Mist device to iCloud, then you can go to the Find My app and see it on the map. The whole process is anonymous and encrypted to protect your privacy. And it’s effcient, so there is no need to worry about the battery life and data usage. To prevent unwanted tracking, when someone else’s Mist is seen travelling with you for a period of time, your iOS device will find it and send you an alert notification. If you haven’t found this device after a while, it will play a sound so you can find it. But don’t worry, if someone next to you has a Mist device, as long as the device is near it’s owner, you will not receive a notification. Only you can see where your Mist is. No location data or location history is physically stored inside Mist. Communication with the Find My network is end-to-end encrypted so that only the owner of a device has access to its location data, and no one including Apple knows the identity or location of any device that helped find it. * Mist is a precision device. Don't discard it, and don't let it be overly affected. * Keep away from all heat and fire sources, such as heating equipment, heaters, ovens, flames and exposure to sunlight. * Do not repair or disassemble the equipment by yourself. * Avoid use or storage in high humidity or temperatures above 60 , otherwise it may cause failure. * Dispose of products in accordance with local government regulations on waste disposal. FCC Warning statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 2.1 Add Mist with factory setting state 1) Update to the latest version of iOS or iPadOS. Turn on Bluetooth of your phone, then pull the mylar out of Mist. 2) Open the Apple Find My app, tap +, then tap Add Other Item , search for Mist, and follow the onscreen instructions. 2.2 Add Mist in other state 1) Resetting If Mist is not added to the Apple ID after ten minutes, Bluetooth will stop transmitting to save power. You need to power off/on the battery five times to reset it again. Reset is successful if hear a different power-on sound. Then you can start adding to Find My again. The method is the same as 2.1. 2) If order to pair Mist with another Apple ID, first remove it from Find My by tapping on the Items tab, tapping the name on the Mist item, scrolling down to the bottom of the detail card, and then tapping Remove Item. It can then be added again by following the instructions in 2.1. To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find items app on Apple Watch requires the latest version of watchOS. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compl…

Text truncated - open the document above for the full version.

Showa Mirai LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 23, 2023 FCC ID: 2BCYK-M001 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Showa Mirai LLC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Showa Mirai LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Showa Mirai LLC Address: 1216 Calle Del Sol, Santa Barbara, California, 93101 United States Contact Person: Christopher Herbert Tel.: (858) 663-2577 Email: [email protected] Sincerely, Signature:

Report No.: BL-SZ2290602-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Reflying Electronic Co., Ltd. Address: 2F, Bldg. 4, 201-501, Bldg. B6, Gaoxinjian Industrial Area, Fuyuan 1 Rd., Heping Shequ, Fuhai St., Baoan Dist., Shenzhen City, China. Equipment Type: MyTag Model Name: KJ-187 Brand Name: Kashimura Test Standard: ANSI/IEEE Std 149-1979 Test Date: Sep. 19, 2022 Date of Issue: Sep. 21, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Tolan Tu Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2290602-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 21, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory ..................................................................................................................... 3 1.2 Test Location ......................................................................................................................... 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ............................................................................................................ 4 2.2 Manufacturer Information ...................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) .......................................................... 4 2.4 Ancillary Equipment .............................................................................................................. 4 2.5 Technical Information ............................................................................................................ 4 3 SUMMARY OF TEST RESULTS ................................................................................................. 5 3.1 Test Standards ...................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................... 5 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 6 4.1 Test Condition ....................................................................................................................... 6 4.2 Test Equipment List .............................................................................................................. 6 4.3 Test Setup ............................................................................................................................. 7 ANNEX A TEST RESULTS ............................................................................................................. 8 A.1 Gain and Efficiency ............................................................................................................... 8 ANNEX B RADIATION PATTERN .................................................................................................. 9 ANNEX C TEST SETUP PHOTOS ............................................................................................... 12 ANNEX D EUT PHOTO ................................................................................................................ 12 Report No.: BL-SZ2290602-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2290602-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen Reflying Electronic Co., Ltd. Address 2F, Bldg. 4, 201-501, Bldg. B6, Gaoxinjian Industrial Area, Fuyuan 1 Rd., Heping Shequ, Fuhai St., Baoan Dist., Shenzhen City, China. 2.2 Manufacturer Information Manufacturer Shenzhen Xunsiwei Circuit Co., Ltd Address Floor 3, Building B, No. 57, Houting Second Industrial Zone, Shajing Street, Bao'an District, Shenzhen City, China. 2.3 General Description for Equipment under Test (EUT) EUT Name MyTag Model Name Under Test KJ-187 Antenna Type PCB Antenna Dimensions 10.5*2.6 mm 2.4 Ancillary Equipment Note: Not applicable. …

Text truncated - open the document above for the full version.

Showa Mirai LLC Date: October 23, 2023 Product Model Number: Mist M001 FCC ID: 2BCYK-M001 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Christopher Herbert Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: (858) 663-2577 On behalf of: Showa Mirai LLC

Showa Mirai LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 23, 2023 Subject; Request for Confidentiality FCC ID: 2BCYK-M001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Christopher Herbert Title: Manager

FCC ID: 2BCYK-M001 External

Page 1 of 1 Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

FCC ID: 2BCYK-M001 Internal BT ANT

FCC ID: 2BCYK-M001 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093， Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit -5.74 -5(±1) -4 0.40 2480 5 0.125984 3.0 So a SAR test is not required

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 53 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Showa Mirai LLC Address: 1216 Calle Del Sol, Santa Barbara, California, 93101 United States EUT Name: Mist Brand Name: / Model Number: Mist M001 Series Model Number: / Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF231018R00101 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2BCYK-M001 Test Date: 2023-10-10 to 2023-10-18 Date of Issue: 2023-10-20 Prepared By: Chris Liu / Project Engineer Date: 2023-10-20 Approved By: Ryan.CJ / EMC Manager Date: 2023-10-20 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF231018R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 53 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-10-20 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF231018R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 53 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ..........................................................................................................................................5 1.1 Identification of Testing Laboratory ...............................................................................................5 1.2 Identification of the Responsible Testing Location ......................................................................5 1.3 Announcement .................................................................................................................................5 2 PRODUCT INFORMATION ..........................................................................................................................6 2.1 Application Information ...................................................................................................................6 2.2 Manufacturer Information ................................................................................................................6 2.3 Factory Information .........................................................................................................................6 2.4 General Description of Equipment under Test (EUT) ...................................................................6 2.5 Technical Information ......................................................................................................................6 3 SUMMARY OF TEST RESULTS .................................................................................................................8 3.1 Test Standards ..................................................................................................................................8 3.2 Uncertainty of Test ...........................................................................................................................8 3.3 Summary of Test Result ..................................................................................................................8 4 TEST CONFIGURATION .............................................................................................................................9 4.1 Test Equipment List .........................................................................................................................9 4.2 Test Auxiliary Equipment ............................................................................................................. 13 4.3 Test Modes ..................................................................................................................................... 13 5 EVALUATION RESULTS (EVALUATION) ................................................................................................ 14 5.1 Antenna requirement .................................................................................................................... 14 5.1.1 Conclusion: .......................................................................................................................... 14 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 15 6.1 Conducted Emission at AC power line ....................................................................................... 15 6.1.1 E.U.T. Operation: ................................................................................................................. 15 6.1.2 Test Setup Diagram: ............................................................................................................ 15 6.1.3 Test Data: ............................................................................................................................ 15 6.2 Occupied Bandwidth ...........................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2BCYK-M001 RF radiated test setup below 1GHz Above 1GHz