2BCZP-SDAD30Pet feeder

15 SPECIFICATIONS Product name: Smart petfeeder Model: Capacity: 3L Working power: SV = lA/2A Connection: Wi-Fi (2.4GHz) Distance No distance limit restrictions: Productsize: 395Xl83X275mm Product net 1.6Kg weight: Battery: 3 x D-size alkaline batteries (Not included )) 肝oductmate「ial: ABS/304 stainless steel bowl NOTICE • Please be aware that the feeder only supports 2.4GHz Wi-Fi networks with password protection. • Recommended to use pet food with a diameter of 5-15mm, any shape is acceptable. Do not place wet food or other types of food. • Please place the device correctly to prevent pets from knocking it over; it is recommended to place it in a corne「 or against a wall. • Regularly replace the desiccant in the moisture-proof box and other items with moistu「e-p「ooffunctionsif they are stored; otherwise, no need to replace • Regularly check and ensure that the grain bin is in a dry and sealed state. In case of problems such as damp or spoiled pet food, deal with it promptly • Regularly clean the feeding bowl to prevent the growth of bacteria. If cleaning is needed, wipe the feeding bowl dry before putting it back in the bowl holder. • Do not put substances other than pet food in the grain bin to avoid abnormal device operation, food spoilage, and harm to pet health. • The product's power cord should be hidden as much as possible to p「eventpets from chewing or scratching it, causing damage. • If the feeder is without powe「fora long time, you may need to reset the time or feeding schedule after reconnecting the power. • This device is not recommended for use with young pets within three months. • Children should not use it alone. 16 SD-AD30 17 • The feeder must be used with a standard power socket and should be kept separate from other electrical appliances. • Ensure that the voltage used matches the relevant power para mete「sindicated for the feeder. • Avoid forcefully pulling the power cord; if the power cord or plug is damaged, stop using it immediately • Avoid subjecting the feeder to strong impacts *Please carefully read the warnings and precautions; failure to comply will be at your own risk. WARRANTY • 12-month warranty. • For guidance on product use, please contact our customer service team via email: [email protected] 18 F CC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of t he FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, u ses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful i nterference to radio communications. How ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Re orient or relocate the receiving antenna. —Incre ase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject t o the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party re sponsible for compliance could void the user's authority to operate t he equipment. FCC Radiation Exposure Statement This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all p ersons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure com

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Electronic Mac, Inc. FRN: 0033414541 Contact Name:Ray Sia Address: 6525 Crown Blvd, # 20805, San Jose, CA 95120 Telephone No: 408-332-2399 Email: [email protected] Applicant: Company name: shenzhenshihuachengjieguangxuekejiyouxiangongsi Product Description: Pet feeder Grantee code: 2BCZP FCC ID: 2BCZP-SDAD30 FRN：0034280610 Contact Name: wenmingzhou Address:guangdongshengshenzhenshinanshanquxilijiedaoshuguangshequTCLguojiEchengG2don g404B Telephone No: 13698069765 Email: [email protected] [shenzhenshihuachengjieguangxuekejiyouxiangongsi] certifies that, as of the date of this filing of the application with the TCB, [Electronic Mac, Inc.] is our designated US agent for service of process for the above referenced FCC ID. [shenzhenshihuachengjieguangxuekejiyouxiangongsi] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Electronic Mac, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/09/27 Applicant’s Name: shenzhenshihuachengjieguangxuekejiyouxia ngongsi US Agent’s Name: Electronic Mac, Inc. Title: Manager Title: General Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: shenzhenshihuachengjieguangxuekejiyouxiangongsi Grantee code: 2BCZP FCC ID: 2BCZP-SDAD30 Contact Name: wenmingzhou Address: guangdongshengshenzhenshinanshanquxilijiedaoshuguangshequTCLguojiEc hengG2dong404B Telephone No: 13698069765 Fax No: [email protected] Email: i. [shenzhenshihuachengjieguangxuekejiyouxiangongsi](“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [shenzhenshihuachengjieguangxuekejiyouxiangongsi] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [shenzhenshihuachengjieguangxuekejiyouxiangongsi] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2023/09/29 Applicant’s Name: shenzhenshihuachengjieguangxuekejiyouxiangongsi Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

shenzhenshihuachengjieguangxuekejiyouxiangongsi Product Similarity Declaration Product name: Pet feeder Model name: SD-AD30,SD-AD50,SD-KD30,SD-KD50,SD-A30,SD- A50,SD-K30,SD-K50 We (shenzhenshihuachengjieguangxuekejiyouxiangongsi) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model names and colors. Signature: Name: wenmingzhou Title: Manager Date: 2023.9.29

C5266091_X8_Ed.1 1/1 Letter of Authorization shenzhenshihuachengjieguangxuekejiyouxiangongsi Company: shenzhenshihuachengjieguangxuekejiyouxiangongsi Address: guangdongshengshenzhenshinanshanquxilijiedaoshuguangsh equTCLguojiEchengG2dong404B Product Name: Pet feeder Model Number: SD-AD30,SD-AD50,SD-KD30,SD-KD50,SD-A30,SD-A50,SD-K30, SD-K50 FCC Identifier: 2BCZP-SDAD30 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: wenmingzhou Date: 2023.9.27 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 shenzhenshihuachengjieguangxuekejiyouxiangongsi Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023.9.27 Subject: Request for Confidentiality FCC ID: 2BCZP-SDAD30 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, C5266091_X10_Ed.2 1/1 Signature: Name: wenmingzhou Title: Manager

- Page 1 of 5 - ET-23091056 Product Name: Pet feeder Test Model No.: SD-AD30 Ext Photos - Page 2 of 5 - ET-23091056 - Page 3 of 5 - ET-23091056 - Page 4 of 5 - ET-23091056 - Page 5 of 5 - ET-23091056 -----END-----

size :80mm*30mm label

- Page 1 of 6 - ET-23091056 Product Name: Pet feeder Test Model No.: SD-AD30 Internal photos - Page 2 of 6 - ET-23091056 - Page 3 of 6 - ET-23091056 - Page 4 of 6 - ET-23091056 - Page 5 of 6 - ET-23091056 - Page 6 of 6 - ET-23091056 ------END----- ANT

FCC ID: 2BCZP-SDAD30 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: 2BCZP-SDAD30 Test Result of RF Exposure Evaluation The source of the evaluation data results is based on the test report ET-23091056E01/02 Antenna gain=2.54dBi FOR BLE Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK 1.31 1.35 1.79 0.0005 1.0 PASS FOR 2.4GWIFI Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 12.72 18.71 1.79 0.0067 1.0 PASS 802.11g 15.54 35.81 1.79 0.0128 1.0 PASS 802.11n20 15.54 35.81 1.79 0.0128 1.0 PASS Then SAR evaluation is not require .

AntennaSpecification Manufacture：TUYA ProductName：WBR3Antenna AntennaType：PCB TestDate：2019.05.20 Testedby：LongWang Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameWBR3Antenna Productmodel WBR3 AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 1.6252.29 2410 1.7152.17 2420 1.9353.14 2430 1.9854.16 2440 2.0057.62 2450 2.1759.64 2460 2.4561.55 2470 2.3860.64 2480 2.5462.86 2490 2.3059.85 2500 2.4960.41 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 5.EUTPhoto 7 6.TestSetupPhoto

Report No.: ET-23091056E01 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd. TEST REPORT Applicant: shenzhenshihuachengjieguangxuekejiyouxiangongsi Address of Applicant: guangdongshengshenzhenshinanshanquxilijiedaoshuguangshequTCL guojiEchengG2dong404B Manufacturer/Factory: Shenzhen Huachengjie Optical Technology Co.,Ltd. Address of Manufacturer 404B,Building G2,TCL International E City,Shuguang Community,Xili Street,Nanshan District,Shenzhen Product Name: Pet feeder Model No.: SD-AD30,SD-AD50,SD-KD30,SD-KD50,SD-A30,SD-A50,SD-K30,SD- K50 Trade Mark: SURDY FCC ID: 2BCZP-SDAD30 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Test: Sep.22, 2023- Sep.27, 2023 Date of report issued: Oct.08, 2023 Test Result : PASS * Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 33 - Report No.: ET-23091056E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-23091056E01 Original Oct.08, 2023 - Page 3 of 33 - Report No.: ET-23091056E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1. TEST SUMMARY ......................................................................................................................................4 2. GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT .................................................................................................................5 2.2 TEST MODE ................................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................7 2.4 DEVIATION FROM STANDARDS .....................................................................................................................7 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 2.6 TEST FACILITY ............................................................................................................................................7 2.7 TEST LOCATION ..........................................................................................................................................7 2.8 ADDITIONAL INSTRUCTIONS .........................................................................................................................7 3. TEST INSTRUMENTS LIST ......................................................................................................................8 4. TEST RESULTS AND MEASUREMENT DATA .......................................................................................9 4.1 ANTENNA REQUIREMENT .............................................................................................................................9 4.2 CONDUCTED EMISSIONS ...........................................................................................................................10 4.3 DUTY CYCLE .............................................................................................................................................13 4.4 CONDUCTED OUTPUT POWER ...................................................................................................................15 4.5 6DB BANDWIDTH ......................................................................................................................................16 4.6 POWER SPECTRAL DENSITY ......................................................................................................................18 4.7 BAND EDGES ............................................................................................................................................20 Conducted Emission Method ...................................................................................................................20 Radiated Emission Method ......................................................................................................................21 4.8 SPURIOUS EMISSION .................................................................................................................................23 Conducted Emission Method ...................................................................................................................23 Radiated Emission Method ......................................................................................................................25 5. TEST SETUP PHOTO .............................................................................................................................33 6. EUT CONSTRUCTIONAL DETAILS .......................................................................................................33 - Page 4 of 33 - Report No.: ET-23091056E01 …

Text truncated - open the document above for the full version.

Report No.: ET-23091056E02 Tel: +86 755 85259392 Email: [email protected] No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China TEST REPORT Applicant: shenzhenshihuachengjieguangxuekejiyouxiangongsi Address of Applicant: guangdongshengshenzhenshinanshanquxilijiedaoshuguangshequTCL guojiEchengG2dong404B Manufacturer/Factory: Shenzhen Huachengjie Optical Technology Co.,Ltd. Address of Manufacturer 404B,Building G2,TCL International E City,Shuguang Community,Xili Street,Nanshan District,Shenzhen Product Name: Pet feeder Model No.: SD-AD30,SD-AD50,SD-KD30,SD-KD50,SD-A30,SD-A50,SD-K30,SD- K50 Trade Mark: SURDY FCC ID: 2BCZP-SDAD30 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Test: Sep.22, 2023- Sep.27, 2023 Date of report issued: Oct.08, 2023 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Remark: The results shown in this test report refer only to the sample(s) tested , this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 49 - Report No.: ET-23091056E02 Report Revision History Report No. Description Issue Date ET-23091056E02 Original Oct.08, 2023 - Page 3 of 49 - Report No.: ET-23091056E02 Tel: +86 755 85259392 Email: [email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1. TEST SUMMARY ......................................................................................................................................4 2. GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT .................................................................................................................5 2.2 TEST MODE ................................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................7 2.4 DEVIATION FROM STANDARDS .....................................................................................................................7 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 2.6 TEST FACILITY ............................................................................................................................................7 2.7 TEST LOCATION ..........................................................................................................................................7 2.8 ADDITIONAL INSTRUCTIONS .........................................................................................................................7 3. TEST INSTRUMENTS LIST ......................................................................................................................8 4. TEST RESULTS AND MEASUREMENT DATA .......................................................................................9 4.1 ANTENNA REQUIREMENT .............................................................................................................................9 4.2 CONDUCTED EMISSIONS ...........................................................................................................................10 4.3 DUTY CYCLE .............................................................................................................................................13 4.4 CONDUCTED OUTPUT POWER ...................................................................................................................16 4.5 6DB BANDWIDTH & 99% CHANNEL BANDWIDTH ........................................................................................17 4.6 POWER SPECTRAL DENSITY ......................................................................................................................22 4.7 BAND EDGES ............................................................................................................................................25 Conducted Emission Method ...................................................................................................................25 Radiated Emission Method ......................................................................................................................27 4.8 SPURIOUS EMISSION .................................................................................................................................31 Conducted Emission Method ...................................................................................................................31 Radiated Emission Method ......................................................................................................................35 5. TEST SETUP PHOTO .............................................................................................................................49 6. EUT CONSTRUCTIONAL DETAILS .......................................................................................................49 - Page 4 of 49 - Report No.: ET-23091056E02 Tel: +86 755 85259392 Email: [email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 1. Test Summary Tes…

Text truncated - open the document above for the full version.

ET-23091056 Page 1 of 2 Product Name: Pet feeder Test Model No.: SD-AD30 Test Setup Photo Radiated emissions 30MHz to1GHz Above 1GHz ET-23091056 Page 2 of 2 Conducted Emission ------End------