2BD3HLYDD-001RSilicone penis

1.中文英文双面说明书 尺寸：130*105mm/单面印单黑 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Leyi Industry (Shenzhen) Co., Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Leyi Industry (Shenzhen) Co., Ltd Address: 7-6, No. 9, Industrial Second Road, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen, China Product Name: Silicone penis FCC ID: 2BD3HLYDD-001R Model(s): LYDD-001R, LYDD-001K, LYDD-001H, LYSD-001K, LYSD-001R, LYSD-001H, LYDD-002K, LYDD-002R, LYDD-002H, LYSD-002K, LYSD-002R, LYSD-002H, LYDD-003K, LYDD-003R, LYDD-003H, LYSD-003K, LYSD-003R, LYSD-003H, LYDDU-001K, LYDDU-001R, LYDDU-001H, LYDDU-002K, LYDD-002R, LYDDU-002H, LYDDU-003K, LYDDU-003R, LYDDU-003H, LYDD-004R, LYDD-004K, LYDD-004H, LYDDU-004R, LYDDU-004K, LYDDU-004H, LYSD-004R, LYSD-004K, LYSD-004H, LYDD-005R, LYDD-005K, LYDD-005H, LYDDU-005R, LYDDU-005K, LYDDU-005H, LYSD-005R, LYSD-005K, LYSD-005K, LYDD-006R, LYDD-006K, LYDD-006H, LYDDU-006R, LYDDU-006K, LYDDU-006H, LYSD-006R, LYSD-006K, LYSD-006H, LYDD-007R, LYDD-007K, LYDD-007H, LYDDU-007R, LYDDU-007K, LYDDU-007H, LYSD-007R, LYSD-007K, LYSD-007H 2.911(d)(5)(i) Equipment Type We, [Leyi Industry (Shenzhen) Co., Ltd] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: luke lu Date:2023.12.13 Title and Company name: Sales manager / Leyi Industry (Shenzhen) Co., Ltd NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; Leyi Industry (Shenzhen) Co., Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Leyi Industry (Shenzhen) Co., Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Leyi Industry (Shenzhen) Co., Ltd Address: 7-6, No. 9, Industrial Second Road, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen, China Product Name: Silicone penis FCC ID: 2BD3HLYDD-001R Model(s): LYDD-001R, LYDD-001K, LYDD-001H, LYSD-001K, LYSD-001R, LYSD-001H, LYDD-002K, LYDD-002R, LYDD-002H, LYSD-002K, LYSD-002R, LYSD-002H, LYDD-003K, LYDD-003R, LYDD-003H, LYSD-003K, LYSD-003R, LYSD-003H, LYDDU-001K, LYDDU-001R, LYDDU-001H, LYDDU-002K, LYDD-002R, LYDDU-002H, LYDDU-003K, LYDDU-003R, LYDDU-003H, LYDD-004R, LYDD-004K, LYDD-004H, LYDDU-004R, LYDDU-004K, LYDDU-004H, LYSD-004R, LYSD-004K, LYSD-004H, LYDD-005R, LYDD-005K, LYDD-005H, LYDDU-005R, LYDDU-005K, LYDDU-005H, LYSD-005R, LYSD-005K, LYSD-005K, LYDD-006R, LYDD-006K, LYDD-006H, LYDDU-006R, LYDDU-006K, LYDDU-006H, LYSD-006R, LYSD-006K, LYSD-006H, LYDD-007R, LYDD-007K, LYDD-007H, LYDDU-007R, LYDDU-007K, LYDDU-007H, LYSD-007R, LYSD-007K, LYSD-007H 2.911(d)(5)(ii) Applicant filing We, [Leyi Industry (Shenzhen) Co., Ltd] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: luke lu Date:2023.12.13 Title and Company name: Sales manager / Leyi Industry (Shenzhen) Co., Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 Leyi Industry (Shenzhen) Co., Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Leyi Industry (Shenzhen) Co., Ltd Agent Authorization Company: Leyi Industry (Shenzhen) Co., Ltd Address: 7-6, No. 9, Industrial Second Road, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen, China Product Name: Silicone penis Model Number(s): LYDD-001R, LYDD-001K, LYDD-001H, LYSD-001K, LYSD- 001R, LYSD-001H, LYDD-002K, LYDD-002R, LYDD-002H, LYSD-002K, LYSD- 002R, LYSD-002H, LYDD-003K, LYDD-003R, LYDD-003H, LYSD-003K, LYSD- 003R, LYSD-003H, LYDDU-001K, LYDDU-001R, LYDDU-001H, LYDDU-002K, LYDD-002R, LYDDU-002H, LYDDU-003K, LYDDU-003R, LYDDU-003H, LYDD- 004R, LYDD-004K, LYDD-004H, LYDDU-004R, LYDDU-004K, LYDDU-004H, LYSD-004R, LYSD-004K, LYSD-004H, LYDD-005R, LYDD-005K, LYDD-005H, LYDDU-005R, LYDDU-005K, LYDDU-005H, LYSD-005R, LYSD-005K, LYSD- 005K, LYDD-006R, LYDD-006K, LYDD-006H, LYDDU-006R, LYDDU-006K, LYDDU-006H, LYSD-006R, LYSD-006K, LYSD-006H, LYDD-007R, LYDD-007K, LYDD-007H, LYDDU-007R, LYDDU-007K, LYDDU-007H, LYSD-007R, LYSD- 007K, LYSD-007H Product Description: Silicone penis We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: December 13, 2023 Name: luke lu Title: Sales manager Company: Leyi Industry (Shenzhen) Co., Ltd

Leyi Industry (Shenzhen) Co., Ltd Model Difference Data：December 20, 2023 Product description: Silicone penis Model name: LYDD-001R, LYDD-001K, LYDD-001H, LYSD-001K, LYSD-001R, LYSD-001H, LYDD-002K, LYDD-002R, LYDD-002H, LYSD-002K, LYSD-002R, LYSD-002H, LYDD-003K, LYDD-003R, LYDD-003H, LYSD-003K, LYSD-003R, LYSD-003H, LYDDU-001K, LYDDU-001R, LYDDU-001H, LYDDU-002K, LYDD-002R, LYDDU-002H, LYDDU-003K, LYDDU-003R, LYDDU-003H, LYDD-004R, LYDD-004K, LYDD-004H, LYDDU-004R, LYDDU-004K, LYDDU- 004H, LYSD-004R, LYSD-004K, LYSD-004H, LYDD-005R, LYDD-005K, LYDD-005H, LYDDU-005R, LYDDU-005K, LYDDU-005H, LYSD-005R, LYSD- 005K, LYSD-005K, LYDD-006R, LYDD-006K, LYDD-006H, LYDDU-006R, LYDDU-006K, LYDDU-006H, LYSD-006R, LYSD-006K, LYSD-006H, LYDD- 007R, LYDD-007K, LYDD-007H, LYDDU-007R, LYDDU-007K, LYDDU-007H, LYSD-007R, LYSD-007K, LYSD-007H Trade Name: LY FCC ID: 2BD3HLYDD-001R All the model are the same circuit and RF module, only for model name and colour. Regards Sincerely Client’s signature : Client’s name / title : luke lu（Sales manager） Contact information / address：7-6, No. 9, Industrial Second Road, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen, China

Leyi Industry (Shenzhen) Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 13, 2023 Subject; Request for Confidentiality FCC ID: 2BD3HLYDD-001R To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: luke lu Title: Sales manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: LYDD-001R External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2BD3HLYDD-001R Model No.: LYDD-001R

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: LYDD-001R Internal Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 ANT Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

Shenzhen CTB Testing Co., Ltd. FCC ID: 2BD3HLYDD-001R Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 433.92MHz: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion FSK 0.4492 -23.99 0.00 -23±1 -22.00 0.01 <5 0.00085 3.00 YES Note:dbm=dbuv/m-95.2+4.7=67.51-95.2+4.7=-22.99dBm(ERP), so the conduct peak power=- 22.99-1=-23.99dBm Conclusion: For the max result : 0.00085≤ FCC Limit 3.0 for 1g SAR.

ANT PHTOT ANT size: length 76mm All measurements were performed radiated and therefore additional antenna gain documentation is not required.

TEST REPORT Compiled by: Reviewed by: Approved by: Zhou Kui Arron Liu Bin Mei / Director The test report is effective only with both signature and specialized stamp. This result(s) shown in this report r Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Silicone penis FCC ID: 2BD3HLYDD-001R Trademark: LY Model Number: LYDD-001R, See the next page for other series models. Prepared For: Leyi Industry (Shenzhen) Co., Ltd Address: 7- 6, No. 9, Industrial Second Road, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen Manufacturer: Leyi Industry (Shenzhen) Co., Ltd Address: 7- 6, No. 9, Industrial Second Road, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Nov. 09, 2023 Sample tested Date: Nov. 09, 2023 to Nov. 15, 2023 Issue Date: Nov. 15, 2023 Report No.: CTB231113054RFX Test Standards FCC Part15.231 ANSI C63.10:2013 Test Results PASS Remark: This is 433MHz radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231113054RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 26 Other series models: LYDD-001K, LYDD-001H, LYSD-001K, LYSD-001R, LYSD-001H, LYDD-002K, LYDD-002R, LYDD-002H, LYSD-002K, LYSD-002R, LYSD-002H, LYDD-003K, LYDD-003R, LYDD-003H, LYSD-003K, LYSD-003R, LYSD-003H, LYDDU-001K, LYDDU-001R, LYDDU-001H, LYDDU-002K, LYDD-002R, LYDDU-002H, LYDDU-003K, LYDDU-003R, LYDDU-003H, LYDD-004R, LYDD-004K, LYDD-004H, LYDDU-004R, LYDDU-004K, LYDDU-004H, LYSD-004R, LYSD-004K, LYSD-004H, LYDD-005R, LYDD-005K, LYDD-005H, LYDDU-005R, LYDDU-005K, LYDDU-005H, LYSD-005R, LYSD-005K, LYSD-005K, LYDD-006R, LYDD-006K, LYDD-006H, LYDDU-006R, LYDDU-006K, LYDDU-006H, LYSD-006R, LYSD-006K, LYSD-006H, LYDD-007R, LYDD-007K, LYDD-007H, LYDDU-007R, LYDDU-007K, LYDDU-007H, LYSD-007R, LYSD-007K, LYSD-007H Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231113054RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 26 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................ 4 2. TEST SUMMARY ........................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY ................................................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................ 7 4.1 Product Information .......................................................................................................................... 7 4.2 Test Setup Configuration .................................................................................................................. 7 4.3 Support Equipment........................................................................................................................... 7 4.4 Test Mode ........................................................................................................................................ 8 4.5 Test Environment ............................................................................................................................. 8 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 9 5.1 Test Facility ...................................................................................................................................... 9 5.2 Test Instrument Used ....................................................................................................................... 9 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 11 6.1 Block Diagram Of Test Setup ......................................................................................................... 11 6.2 Limit ................................................................................................................................................ 11 6.3 Test procedure ............................................................................................................................... 11 6.4 Test Result ..................................................................................................................................... 12 7. RADIATED EMISSION ................................................................................................................. 13 7.1 Block Diagram Of Test Setup ......................................................................................................... 13 7.2 Limit ................................................................................................................................................ 13 7.3 Test procedure ............................................................................................................................... 14 7.4 Test Result ..................................................................................................................................... 15 8. DWELL TIME .................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 1 Model: LYDD-001R Radiated Emission Below 1G Above 1G