2BD3U-X-9Multi-function wireless charger

3. When the product is turned over, the iPhone can be placed horizontally or vertically to charge. 1. Do not immerse the product in water to avoid short circuit of the internal circuit. 2. Do not disassemble or break the product by yourself, so as not to cause product damage. 3. Please keep the product away from flammable and explosive liquids, gases or explosives. 4. Do not place magnetic cards, magnetic strip media and precision machinery too close to the product. 5. To better experience this product, please use a legitimate wall charger and cable. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 1. When wireless charging other devices, please first power the product through the equipped charging cable. 2. When charging a device such as a iPhone, iWatch or Airpods, place the iPhone, iWatch or Airpods flat in the charging area, start charging the device; When fully charged, you can directly remove the device; During charging, if the device needs to terminate charging, it can be removed directly. Three. Operation Steps Four. Precautions Dear users, thank you for purchasing our products. In order to better serve you, please carefully read, fill in and properly keep this warranty card after purchasing the product. 1. Since the date of your purchase of the product, if it is not artificially damaged or damaged, our company will provide free maintenance service within one year. 2. During product maintenance, please properly send (mail) this warranty card together with the purchased products back to our after-sales service department for maintenance. 3. For maintenance not caused by product quality, such as damage caused by improper use, man-made collision, falling and other reasons, our company will charge the cost of maintenance and replacement parts. User name User address Product name Email Date Maintenance and treatment Maintenance record Contacts Product model Purchase date Product Warranty Card Warranty Description: After the product is connected to the power supply, the iPhone, iWatch and Airpods can be charged after being put down Product Name3 in 1 Wireless Charging Station Horizontally,Vertically Aluminum Alloy,Metallic Paint,Silicone & PC Panel etc White, Black 120*106.5*13mm Mode of Use Material Color Interface Input Current iPhone Output iWatch Output Airpods Dimension CompatiblityiPhone,iWatch,Airpods iPhone wireless charging area One. Product Introduction Two. Specification Parameters This product is a 3-in-1 fast wireless charger that simultaneously wirelessly charges iPhones, iWatch, Airpods . This product is a convenient and practical intelligent electronic device. This product easy to store and carry; Open the charging panel state can charge multiple devices at the same time. You can charge your device wirelessly by placing it in the charging zone. You can put the phone vertically or horizontally, without affecting the charging of the phone. You can also video chat or watch your favorite movie or TV while charging. iWatch wireless charging area Type-C power port input: ≥9V-2A Airpods wireless charging area Multi-function wireless charger Instruction Manual FR ETUI *Our company has the final right to interpret this instruction

Shenzhen shangzhu technology co., ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-01-04 FCC ID: 2BD3U-X-9 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen shangzhu technology co., ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen shangzhu technology co., ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Shenzhen shangzhu technology co., ltd Address: 3F, Building#3, Youcheng Industrial Zone, Guanlan, Longhua District, Shenzhen, China Contact Person: LUO ZHUXIAN Tel.: +86 15059790086 Email: [email protected] Sincerely, Signature:

1/1 TO: Office Feder 7435 Colum US A Com p FRN:0 Conta Addre Telep Email EIN:9 This l a loca The U outlin § 2.9 Appl Comp Produ FRN:0 Grant FCC I Conta Addre Telep Email The A Equip This Date Appl Title Signa US Age e of Enginee ral Commun 5 Oakland Mi mbia, MD 21 Agent for Se pany Name: 0033489683 act Name: Da ess: 1312 17 phone No: (9 l:market@clf 98-1720547 letter is to co al representa US Agent fo ned in the FC 11. icant: pany name:S uct Descriptio 0034609131 tee code:2BD ID:2BD3U-X- act Name:LUO ess:3F, Buildi phone No: +8 l:123085536 Applicant is pment Autho A greement e: 2024/01/ icant’s Nam :Project:Ge ature ent for Se ering Techno ications Com lls Road 1046 ervice of Pr CLF Import a avid chen 7th Street #6 949) 254-256 fimportexpor onfirm that t ative on beha r Service of CC Equipmen Shenzhen sha on: Multi-func D3U 9 O ZHUXIAN ing#3, Youch 86150597900 @qq.com aware of a rization Pro g t is valid un /08 me:LUO ZHU eneral Manag ervice of P ology mmission rocess: and Export L 692，Denver 65 rt.com the US Agent alf of Shenzh Process is a nt Authorizat angzhu techno ction wireless heng Industri 086 nd agrees to gram, Report ntil (Perman XIAN ger Process L Limited r, CO 80202, t for Service hen shangzhu aware of and tion Program ology co., ltd s charger ial Zone, Gua o comply w t and Order F nently valid US Ag Title: Signa LETTER OF United State of Process a u technology d agrees to c , Report and d anlan, Longhu ith the requ FCC 22-84, a d). gent for Se Manager ature F ATTEST es accepts resp y co., ltd. comply with d Order FCC ua District, S uirements ou and clause § rvice of Pr o TATION onsibility to the require 22-84, and c Shenzhen, Ch utlined in the 2.911. ocess’s Nam act as ments clause ina e FCC me:

Shenzhen Little Apple Technology Electronics Co., Ltd Product Specification Coil specification sheet Part No Customer Shenzhen Little Apple Technology Co., Ltd A11 Descriptio 2023-08-18 Date Manufacturer: Shenzhen Little Apple Technology Electronics Co., Ltd Address: 301, Building 3, Building 11, Anlan Avenue, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen 1、Coil specifications PCB board FR4 PCB board thickness 1.0mm PCB layers2nd floor Electronic materialsunleaded ProcessLead-free process Airpods coil specifications A11 coil 6.3uH ± 0.2uH 24 strand enameled wire length 50mm magnetic disc diameter 43mm ± 0.5mm coil total thickness ≤ 1.5mm

Shenzhen Little Apple Technology Electronics Co., Ltd Product Specification Coil specification sheet Part No Customer Shenzhen Little Apple Technology Co., Ltd A11 Descriptio 2023-08-18 Date Manufacturer: Shenzhen Little Apple Technology Electronics Co., Ltd Address: 301, Building 3, Building 11, Anlan Avenue, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen 1、Coil specifications PCB board FR4 PCB board thickness 1.0mm PCB layers2nd floor Electronic materialsunleaded ProcessLead-free process Phone coil specifications A11 coil 6.6uH ± 0.2uH 100 strand silk wrapped wire with a length of 20mm (welding 180mm long and outer diameter of 1.2mm electronic wire) magnetic plate thickness of 0.6mm, diameter of 43mm ± 0.5mm, with small magnetic plates added in the middle. The total thickness of the coil is ≤ 1.6mm 4

Shenzhen Little Apple Technology Electronics Co., Ltd Product Specification Coil specification sheet Part No Customer Shenzhen Little Apple Technology Co., Ltd A11 Descriptio 2023-08-18 Date Manufacturer: Shenzhen Little Apple Technology Electronics Co., Ltd Address: 301, Building 3, Building 11, Anlan Avenue, Zhangkengjing Community, Guanhu Street, Longhua District, Shenzhen 1、Coil specifications PCB board FR4 PCB board thickness 1.0mm PCB layers2nd floor Electronic materialsunleaded ProcessLead-free process Watch coil specifications Hard magnetic die-casting 7.6uH ± 0.2uH 24 strand enameled wire with a wire length of 150mm ± 2mm, tin on the wire head within 3mm, 3200 Gauss H=2mm

Family models declaration letter Jan. 04, 2024 We Shenzhen shangzhu technology co., ltd Of 3F, Building#3, Youcheng Industrial Zone, Guanlan, Longhua District, Shenzhen, China Declare under our sole responsibility that the product Product: Multi-function wireless charger Model Number: X-9, M-52, X-10, X-11, X-12 Except for the model and appearance color, all models have the same circuits and modules. Sincerely, LUO ZHUXIAN/ General Manager E-mail: : [email protected] Phone: +86 15059790086 Fax: +86 15059790086 Address : 3F, Building#3, Youcheng Industrial Zone, Guanlan, Longhua District, Shenzhen, China

Shenzhen shangzhu technology co., ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 4, 2024 Subject; Request for Confidentiality FCC ID: 2BD3U-X-9 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: LUO ZHUXIAN Title: General Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen shangzhu technology co., ltd Date：Jan. 04, 2023 Product Model Number: X-9, M-52, X-10, X-11, X-12 FCC ID：2BD3U-X-9 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: General Manager Email: [email protected] Telephone: +86 15059790086 On behalf of: Shenzhen shangzhu technology co., ltd

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

FR ETUI Label size: 43mm * 32mm. The rounded corners should be close to the actual product Multi-function wireless charger, FCC ID: 2BD3U-X-9 Label: Label Location: 3W 10W

Int Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Phone: ANT Watch: ANT AirPods: ANT

- Page 1 of 12 - Report No.: HB20231211006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Multi-function wireless charger Trade Mark: N/A Model Number: X-9 FCC ID: 2BD3U-X-9 Prepared for Shenzhen shangzhu technology co., ltd 3F, Building#3, Youcheng Industrial Zone, Guanlan, Longhua District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20231211006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ........................................... 10 4.1.4. Test Setup .................................................................................................................................................. 10 4.1.5. Test Result ................................................................................................................................................. 11 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 12 - Page 3 of 12 - Report No.: HB20231211006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen shangzhu technology co., ltd Address ................................. : 3F, Building#3, Youcheng Industrial Zone, Guanlan, Longhua District, Shenzhen, China Manufacturer's Name .......... : Shenzhen shangzhu technology co., ltd Address ................................. : 3F, Building#3, Youcheng Industrial Zone, Guanlan, Longhua District, Shenzhen, China Product description Product name ........................ : Multi-function wireless charger Model Number ....................... : X-9 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 11, 2023~Jan. 04, 2024 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : (G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20231211006E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz…

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted Emission MPE