2BD8CPM6100Patient Monitor

Patient Monitor Operation Manual PM6100/PM6100A/PM6100B/PM6100C Shanghai Berry Electronic Tech Co., Ltd. Release date: 02/15/2023 Version: 1.3 Shanghai Berry Electronic Tech Co., Ltd. PM6100 Series Patient Monitor I Version Information Version Date Content V1.0 2016/06/27 Create this document. V1.1 2017/10/12 Refined details. V1.2 2021/12/12 Refined details. V1.3 2023/02/15 Upgrade product. Shanghai Berry Electronic Tech Co., Ltd. PM6100 Series Patient Monitor II Preface Shanghai Berry Electronic Tech Co., Ltd (hereinafter called Berry) owns the copyright of this manual and Berry is entitled to deal with it as the confidential data. This manual is just used as the reference of operating, maintaining, repairing Berry’s products. Others have no right to make the content of the manual known to the public. This manual contains the proprietary information which is protected by copyright law. Without Berry’s written consent, it’s not allowed to take pictures, print or translate any part of this manual to other languages. Observance of this manual is a prerequisite for proper performance and correct operation, and ensures patient and operator safety. Berry doesn’t make a guarantee in any forms for this manual including (but not limited to) the guarantee of its implied marketability and suitability which is put forward for certain purpose. Berry isn’t responsible for the mistakes in this manual and the accidental or indirect damage caused by using this manual. Statement & Services Berry will be responsible for safety, reliability and performance of the device only under these circumstances: All installation operations, expansions, changes, modifications and repairs of this product are conducted by Berry or manufacturer authorized personnel; and The electrical installation of the relevant room complies with the applicable national and local requirements; and This product is operated under strict observance of this manual. If each hospital or organization which is responsible for using this device cannot make a satisfied repair plan, it may result in the abnormal equipment failure and threaten human health. Berry will be responsible for technical support and any services of setting up, using and maintaining, so for lay operator If need technical support in setting up, using, or maintaining the monitor, please contact Berry. Any unexpected operation or events, Any changes in the performance, please contact Berry for technical support and solutions. Shanghai Berry Electronic Tech Co., Ltd. PM6100 Series Patient Monitor III Guarantee Berry provides after-sales service in time for PM6100 which conforms to the warranty regulations. The warranty period of the main machine is 1 year and the accessories are 6 months since the sales date. Berry’s obligation under this assurance doesn’t include freight, other cost. Berry has no responsibility for direct, indirect or ultimate damage and delay under these circumstances: improper use, replace accessories not permitted by Berry or repaired by people Berry doesn’t authorize. This assurance is not applicable to these situations: non-normal use, without maintenance or broken device, Berry’s label and mark is changed or torn off. Safety, Reliability and Operation Berry will be not responsible for safety, reliability and running state of PM6100 series Patient Monitor under these circumstances:  Components are disassembled, stretched and reset.  PM6100 series Patient Monitor isn’t operated according to the operation manual. For home healthcare environment , the patient will be an intended operator, if not, the operator must be around the patient during the measurements. all measures include Heart Rate, SpO2, Pulse Rate, Body temperature, respiration rate and NIBP can be safely performed by operator. The operator can do some simple inspection and maintenance (refer Chapter 6 Maintenance and Cleaning), and any other complex inspection, calibration, maintenance and components replacement shall be preformed by Berry or a service personal authorized by Berry, if you need related services please contact with Berry’s customer service team. Shanghai Berry Electronic Tech Co., Ltd. PM6100 Series Patient Monitor IV Catalogue Version Information ........................................................................................................................... I Preface.............................................................................................................................................. II Statement & Services ............................................................................................................... II Guarantee ................................................................................................................................ III Safety, Reliability and Operation ............................................................................................ III Chapter 1 Safety Information ......................................................................................................... 6 1.1 WARNING .......................................................................................................................... 6 Chapter 2 Summary ..................................................................................................................... 10 2.1 Product Description ........................................................................................................... 10 2.2 Function and Features ....................................................................................................... 11 2.3 Product Appearance .......................................................................................................... 11 2.4 Components ...................................................................................................................... 12 2.5 Intended Use ...............................................................................................…

Text truncated - open the document above for the full version.

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID: 2BD8CPM6100 Model name: PM6100 PM6100A AM6200 We, applicant Company Name: Shenzhen D-Health Medical Technology Co., Ltd. Address: Unit 501, No. 1 Juyin Technology Industrial Plant, Jihua Street, Longgang District, Shenzhen, China Phone: 18697555528 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024/5/15 Signature Date Printed Name of Signee: Yan Xu Company: Shenzhen D-Health Medical Technology Co., Ltd. Address: Unit 501, No. 1 Juyin Technology Industrial Plant, Jihua Street, Longgang District, Shenzhen, China Phone: 18697555528 Email: [email protected]

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID: 2BD8CPM6100 Model name:PM6100 PM6100A AM6200 We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. US-American Point of Contact Applicant/Approval Holder Company Name: FCC US Agent, LLCShenzhen D-Health Medical Technology Co., Ltd. FRN: 0033402884 0034641100 Contact Name: Tim Payne Yan Xu Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Unit 501, No. 1 Juyin Technology Industrial Plant, Jihua Street, Longgang District, Shenzhen, China Phone: 708-571-3148 18697555528 Email: [email protected] [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID: 2BD8CPM6100 Model name: PM6100 PM6100A AM6200 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:  the Operational Description  the Block Diagram  the Schematics  the Parts Lists The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024/5/15 Signature Date Printed Name of Signee: Yan Xu Company: Shenzhen D-Health Medical Technology Co., Ltd. Address: Unit 501, No. 1 Juyin Technology Industrial Plant, Jihua Street, Longgang District, Shenzhen, China Email: [email protected]

Shenzhen D-Health Medical Technology Co., Ltd. POWER OF ATTORNEY DATE: May 30, 2024 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize Eurofins TA Technology (Shanghai) Co., Ltd./Elena Zhao on our behalf, to apply to FCC on our equipment for FCC ID: 2BD8CPM6100. Any and all acts carried out by Eurofins TA Technology (Shanghai) Co., Ltd. on our behalf shall have the same effect as acts of our own. Sincerely, Print name: Xu Yan Signature: Shenzhen D-Health Medical Technology Co., Ltd.

Date: 27/05/2024 Similarity Declaration From: Shenzhen D-Health Medical Technology Co., Ltd. Unit 501, No. 1 Juyin Technology Industrial Plant, Jihua Street, Longgang District, Shenzhen, China Shanghai Berry Electronic Tech Co., Ltd.as owner of the technology and manufacturer of the products, For the Patient Monitor tested in this application, the main test models are PM6100, and the covering models are PM6100A and AM6200 . Except for the differences in product models ， software and appearance (see the table below for specific differences), the structure and internacircuit of the three models are completely the same. The PM6100 patient monitor can monitor physiological signals including HR (Heart Rate), NIBP (non-invasive blood pressure), SpO2, PR (pulse rate), TEMP (body temperature) and RESP (Respiration rate).The PM6100A patient monitor can monitor physiological signals including NIBP (non-invasive blood pressure), SpO2, PR (pulse rate), and RESP (Respiration rate).The AM6200 series Veterinary monitor can monitor physiological signals including HR (Heart Rate), NIBP (non-invasive blood pressure), SpO2, PR (pulse rate), TEMP (body temperature) and RESP (Respiration rate). Therefore, PM6100 model was selected in the test to cover all models. Model Item PM6100 PM6100A AM6200 SW Version V2.53.00.00 V2.53.00.00 V1.55.00.00 Function SpO 2 ,PR/HR NIBP,TEMP, RESP measurement SpO 2 ,NIBP, RESP measurement SpO 2 ,PR/HR NIBP,TEMP, RESP measurement Communication Bluetooth Bluetooth Bluetooth Appearance The same Different Using objects Human Human Animals Attachment components 1. Patient monitor host 2. Heart rate and body temperature integrated lead 3. SpO 2 sensor 4. Blood pressure cuff 5. Charging cable 6. Charging base 7. Disposable ECG electrodes 1. Patient monitor host 2. SpO 2 sensor 3. Blood pressure cuff 4. Charging cable 5. Charging base 1. Patient monitor host 2. Heart rate and body temperature integrated lead 3. SpO 2 sensor 4. Blood pressure cuff 5. Charging cable 6. Charging base 7. Disposable ECG electrodes Label The same Different Regards, _______________________________ Full Name:Wuqiao Job title:RA E-mail:[email protected] Phone number:+86 18201831713

EUT Appearance Report No.: R2404A0388 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 1 of 5 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance EUT Appearance Report No.: R2404A0388 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 2 of 5 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R2404A0388 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 3 of 5 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R2404A0388 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 4 of 5 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R2404A0388 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 5 of 5 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Picture 1: Constituents of EUT

上海贝瑞电子科技有限公司 日 期 姓名 材料 比例 镀涂 页码 单位 1/1 设 计 审 核 批 准 mm V1.0 初 版 版 本 更改内容 1:1 AM6200动物监护仪 主机标签 AM6200_BQ_001 20231219 徐韩英 技术要求： ，用专用治具定位，在镭雕机上完成打印作业； 2，要求位置不偏斜；字迹清晰，颜色深浅一致，内容正确无误； V1.1 增加FCC ID: 20240329 徐韩英 2BD8CPM6100 FCC ID: 上海贝瑞电子科技有限公司 日 期 姓名 材料 比例 镀涂 页码 单位 1/1 设 计 审 核 批 准 mm V2.0 初 版 版 本 更改内容 1:1 PM6100系列多参数检测仪 主机标签 PM6100_BQ_101 20221107 徐韩英 Product Name: Patient Monitor Mxxxxxxx PM6100 xxxx-xx-xx Shanghai Berry Electronic Tech Co.,Ltd. Unit 104, 1st Floor, 7th Building, No.1188, Lianhang Road, Minhang District, Shanghai, China 201112 TEL: +86-21-5853 1958 FAX: +86-21-5853 0420 WEB: www.shberrymed.com Power Supply: DC 3.7V, 1800mAh built-in lithium-ion battery Battery Charging Rated Voltage: DC 5.0V Battery Charging Rated Current: 1000mA Temperature 5°C~40°C -10°C~50°C Relative Humidity Operation: 15%~85%(no condensation) Transport and storage: 10%~90%(no condensation) Atmosphere Pressure Operation: 800hPa~1050hPa Transport and storage: 700hPa~1060hPa Sxxxxxxxxxxx IPX1 技术要求： ，用专用治具定位，在镭雕机上完成打印作业； 2，要求位置不偏斜；字迹清晰，颜色深浅一致，内容正确无误； Operation: Transport and storage: Prolinx Gmbh Brehmstr. 56, 40239, Duesseldorf Germany 0123 20240125 徐韩英 增加欧代信息 V2.1 V2.2 增加FCC ID: 徐韩英 20240329 2BD8CPM6100 FCC ID: 上海贝瑞电子科技有限公司 日 期 姓名 材料 比例 镀涂 页码 单位 1/1 设 计 审 核 批 准 mm V2.0 初 版 版 本 更改内容 1:1 PM6100A系列多参数检测仪 主机标签 PM6100A_BQ_101 20240529 徐韩英 Product Name: Patient Monitor Mxxxxxxx PM6100A xxxx-xx-xx Shanghai Berry Electronic Tech Co.,Ltd. Unit 104, 1st Floor, 7th Building, No.1188, Lianhang Road, Minhang District, Shanghai, China 201112 TEL: +86-21-5853 1958 FAX: +86-21-5853 0420 WEB: www.shberrymed.com Power Supply: DC 3.7V, 1800mAh built-in lithium-ion battery Battery Charging Rated Voltage: DC 5.0V Battery Charging Rated Current: 1000mA Temperature 5°C~40°C -10°C~50°C Relative Humidity Operation: 15%~85%(no condensation) Transport and storage: 10%~90%(no condensation) Atmosphere Pressure Operation: 800hPa~1050hPa Transport and storage: 700hPa~1060hPa Sxxxxxxxxxxx IPX1 技术要求： ，用专用治具定位，在镭雕机上完成打印作业； 2，要求位置不偏斜；字迹清晰，颜色深浅一致，内容正确无误； Operation: Transport and storage: Prolinx Gmbh Brehmstr. 56, 40239, Duesseldorf Germany 0123 2BD8CPM6100 FCC ID:

Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 1 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 2 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 3 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 4 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 5 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 6 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 7 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 8 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2BD8CPM6100 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 9 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd.

Prepared by: Wei Fangying Approved by: Fan Guangchang Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 SAR Exemption Evaluation Applicant Shenzhen D-Health Medical Technology Co., Ltd. FCC ID 2BD8CPM6100 Product Patient Monitor Brand Model PM6100; PM6100A; AM6200 Report No. R2404A0388-S1 Issue Date May 28, 2024 SAR exemption evaluation Report No.: R2404A0388-S1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-008S Page 2 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ................................................................................................................................. 3 1.1 Notes of the Test Report ............................................................................................................ 3 1.2 Test Facility ................................................................................................................................ 3 1.3 Testing Location......................................................................................................................... 3 1.4 Laboratory Environment ............................................................................................................ 3 2 Description of Equipment Under Test ............................................................................................... 4 3 Test Specification, Methods and Procedures ................................................................................... 6 4 Output Power .................................................................................................................................... 7 5 Standalone SAR Test Exclusion Considerations .............................................................................. 8 ANNEX A: The EUT Appearance ............................................................................................................. 9 SAR exemption evaluation Report No.: R2404A0388-S1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-008S Page 3 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test Facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. 1.3 Testing Location Company: Eurofins TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: https://www.eurofins.com/electrical-and-electronics E-mail: [email protected] 1.4 Laboratory Environment Temperature Min. = 18  C, Max. = 25  C Relative humidity Min. = 20%, Max. = 80% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. SAR exemption evaluation Report No.: R2404A0388-S1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-008S Page 4 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment Under Test Client Information Applicant Shenzhen D-Health Medical Technology Co., Ltd. Applicant address Unit 501, No. 1 Juyin Technology Industrial Plant, Jihua Street, Longgang District, Shenzhen, China Manufacturer Shanghai Berry Electronic Tech Co., Ltd Manufacturer address Unit 104, 1st Floor, 7th Building, No.1188 Lianhang Road, Minhang District,Shanghai General Technologies EUT Stage Identical Prototype Model PM6100; PM6100A; AM6200 SN M6000451 Hardware Version V3.3 Software Version PM6100; PM6100A: V2.53.00.00 AM6200: V1.55.00.00 Antenna Type Ceramic Chip Antenna Date of Testing April 16, 2024 Date of Sample Received April 15, 2024 Note: The EUT is sent from the applicant to Eurofins TA and the information of the EUT is declared by the applicant. The differences between models are shown in the table below: Model Item PM6100 PM6100A AM6200 SW Version V2.53.00.00 V2.53.00.00 V1.55.00.00 SpO 2 (Arterial oxygen saturation in the blood) √ √ √ PR/HR (Heart Rate or Pulse Rate) √ √ √ NIBP (non-invasive blood pressure) √ √ √ TEMP (body temperature) √ × √ Communication (Bluetooth) √ √ √ RESP (Respiration rate) √ √ √ Appearance The same Different Others The same Note: This report only tests PM6100. SAR exemption evaluation Report No.: R2404A0388-S1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-008S Page 5 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Wireless Technology and Frequency Range Wireless Technology Modulation Operating Mode Tx (MHz) Bluetooth 2.4G Version 5.0 LE 2402 ~2480 SAR exemption evaluation Report No.: R2404A0388-S1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-008S Page 6 of 9 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 3 Test Specification, Methods and Procedures R…

Text truncated - open the document above for the full version.

DATA SHEET WIRELESS COMPONENTS Ceramic Chip Antenna ANT3216LL00R2400A 2.4 - 2.5 GHZ 3216 Serie s Product Specification – March 27, 2013 V.0 www.yageo.com Mar. 27, 2013 V0 WIRELESS COMPONENTS 2 6 Product specification Ceramic Chip Antenna FEATURES z Compact size z Omni-directional radiation z Tape & reel automatic mounting z Reflow process compatible z RoHS compliant APPLICATIONS z 2.4 GHz WiFi device z Bluetooth gadget z Zigbee device z ISM band equipment ORDERING INFORMATION All part numbers are identified by the series, packing type, material, size, antenna type, working frequency and packing quantity. PART NUMBER ANT 3216 L L00 R 2400A (1) (2) (3) (4) (5) (6) ( 1 ) PRODUCT ANT = Antenna ( 2 ) SIZE 3216 = 3.2 × 1.6 mm ( 3 ) ANTENNA TYPE L,F,A = Chip Antenna ( 4 ) SERIAL NO. L00 ( 5 ) PACKING TYPE R = Tape and Reel ( 6 ) WORKING FREQUENCY 2400 = 2.4GHz PHYCOMP CTC CAN4311712002453K 12NC 431171200245 www.yageo.com Mar. 27, 2013 V0 WIRELESS COMPONENTS 3 6 Product specification Ceramic Chip Antenna SPECIFICATION DESCRIPTION VALUE Working Frequency 2.4 - 2.5 GHz Bandwidth 160 MHz Polarization Linear Azimuth Beamwidth Omni-directional Peak Gain 5.05 dBi (Typ.) Impedance 50Ω Operating Temperature -40 ~105°C Maximum Power 1W Termination Ni / Sn (Environmentally-Friendly Leadless) Resistance to Soldering Heats 260°C , 10sec. NOTE 1. The specification is defined on Yageo evaluation board Ta b l e 1 O O U U T T L L I I N N E E S S YNH0010 Side ViewTop View Bot t om View T W L C S1S2 Fig. 1 Antenna outlines DIMENSIONS DIMENSION L (mm) 3.20 ±0.15 W (mm) 1.60 ±0.15 T (mm) 1.20 ±0.15 C (mm) 0.40 ±0.20 Table 2 Machinical Dimension TERMINAL NAME FUNCTION S1 Feeding Point S2 Soldering Point Table 3 Termination configuration www.yageo.com Mar. 27, 2013 V0 WIRELESS COMPONENTS 4 6 Product specification Ceramic Chip Antenna YNH0011 Bottom Layer Top Layer 2.5 2.0 3.5 0.4 Matching Circuit 1.8 Unit : mm Unit : mm 1030 18 Fig. 2 Outlook and dimension of evaluation board REFERENCE DESIGN OF EVALUATION BOARD Fig. 3 Details of soldering Pad www.yageo.com Mar. 27, 2013 V0 WIRELESS COMPONENTS 5 6 Product specification Ceramic Chip Antenna 2.0 2.13.0 f (GHz) Return loss (dB) −50 −30 −10 10 30 50 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 YNH0012 1 2 3 Fig. 4 Return loss ELECTRICAL PERFORMANCES YNH0013 Y X Z Z axle X axleY axle Gain (dBi) 5.00 − 0.00 − − 5.00 − − 10.00 − − 15.00 − − 20.00 − − 25.00 − − 30.00 − − 35.00 − Fig. 5 Radiation pattern Max gain = 5.05 dBi, at (180, 60) MEG (mean effective gain)= 0.45dBi Directivity (dB) = 7.15 Efficiency = -1.50dB, 70.74% Evaluation board and XYZ direction Marker data 1. 2.37GHz, -10dB 2. 2.45GHz, -27.3dB 3. 2.53GHz, -10dB www.yageo.com Mar. 27, 2013 V0 WIRELESS COMPONENTS 6 6 Product specification Ceramic Chip Antenna REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 0 Mar. 27, 2013 - - New datasheet for Ceramic Chip Antenna, 2.4-2.5 GHz application, size 3216 series

Prepared by: Zhu Chentao Approved by: Xu Kai Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Shenzhen D-Health Medical Technology Co., Ltd. FCC ID 2BD8CPM6100 Product Patient Monitor Brand Model PM6100; PM6100A; AM6200 Report No. R2404A0388-R1V1 Issue Date June 6, 2024 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2023). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2404A0388-R1V1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 2 of 51 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ............................................................................................................................... 5 1.1. Notes of the Test Report ......................................................................................................... 5 1.2. Test Facility ............................................................................................................................. 5 1.3. Testing Location ...................................................................................................................... 5 2. General Description of Equipment Under Test ............................................................................... 6 2.1. Applicant and Manufacturer Information ................................................................................ 6 2.2. General Information ................................................................................................................ 6 3. Applied Standards ........................................................................................................................... 8 4. Test Configuration ........................................................................................................................... 9 5. Test Case Results ......................................................................................................................... 10 5.1. Maximum output power ........................................................................................................ 10 5.2. 99% Bandwidth and 6dB Bandwidth .................................................................................... 12 5.3. Band Edge ............................................................................................................................ 18 5.4. Power Spectral Density ........................................................................................................ 21 5.5. Spurious RF Conducted Emissions .............................…

Text truncated - open the document above for the full version.