2BD9X-FOX-MT95Smart Watch

Shenzhen Fuxuntong Electronics Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [November 19, 2025] U.S. Agent Designation [Shenzhen Fuxuntong Electronics Co.,Ltd] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BD9X-FOX-MT95 Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Fuxuntong Electronics Co.,Ltd]. [Shenzhen Fuxuntong Electronics Co.,Ltd] with the FRN [0034656231] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Yechao Zhang] [Huiying Fan] [General Manager] [Director] [Shenzhen Fuxuntong Electronics Co.,Ltd] [GLOCERTS TECHNOLOGY INC]

Shenzhen Fuxuntong Electronics Co.,Ltd (November 18, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BD9X-FOX-MT95 [Shenzhen Fuxuntong Electronics Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Yechao Zhang Shenzhen Fuxuntong Electronics Co.,Ltd (November 18, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BD9X-FOX-MT95 [Shenzhen Fuxuntong Electronics Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Yechao Zhang

Shenzhen Fuxuntong Electronics Co.,Ltd Model Difference Data：November 18, 2025 Product description: Smart Watch Model name: MT95, MT110, MT120, MT130, MT140 Trade Name: N/A FCC ID: 2BD9X-FOX-MT95 All the model are the same circuit and RF module, only the name and appearance are different. Regards Sincerely Client’s signature : Client’s name / title : Yechao Zhang（General Manager） Contact information / address：619.6/F, Xingzhan Business Distriet, Building C2, Zhonghao New Town, Bantian Street, Longgang District, Shenzhen

Shenzhen Fuxuntong Electronics Co.,Ltd (November 18, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Smart Watch / MT95, MT110, MT120, MT130, MT140 / FCC ID: 2BD9X-FOX-MT95) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Yechao Zhang Title: General Manager

Shenzhen Fuxuntong Electronics Co.,Ltd (November 18, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Yechao Zhang Title: General Manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 External Photos Model: MT95 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4

FCC ID LABEL: Label Location: FCC ID: 2BD9X-FOX-MT95

Shenzhen CTB Testing Co., Ltd. FCC ID:2BD9X-FOX-MT95 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. EDR: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 3.568 2.27 3±1 4.00 2.51 <5 0.77860 3.00 YES 2.441 4.12 2.58 4±1 5.00 3.16 <5 0.98813 3.00 YES 2.480 2.747 1.88 2±1 3.00 2.00 <5 0.62843 3.00 YES 2.402 3.935 2.47 3±1 4.00 2.51 <5 0.77860 3.00 YES 2.441 4.404 2.76 4±1 5.00 3.16 <5 0.98813 3.00 YES 2.480 2.955 1.97 2±1 3.00 2.00 <5 0.62843 3.00 YES 2.402 4.048 2.54 4±1 5.00 3.16 <5 0.98020 3.00 YES 2.441 4.489 2.81 4±1 5.00 3.16 <5 0.98813 3.00 YES 2.480 3.029 2.01 3±1 4.00 2.51 <5 0.79114 3.00 YES GFSK π /4DQPSK 8DQPSK BLE:1M Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 3.448 2.21 3±1 4.00 2.51 <5 0.77860 3.00 YES 2.44 4.057 2.55 4±1 5.00 3.16 <5 0.98793 3.00 YES 2.480 2.815 1.91 2±1 3.00 2.00 <5 0.62843 3.00 YES GFSK BLE:2M Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 3.54 2.26 3±1 4.00 2.51 <5 0.77860 3.00 YES 2.44 4.175 2.62 4±1 5.00 3.16 <5 0.98793 3.00 YES 2.480 2.93 1.96 2±1 3.00 2.00 <5 0.62843 3.00 YES GFSK Conclusion: For the max result : 0.98813≤ FCC Limit 3.0 for 1g SAR.

深圳市一线通线缆有限公司 地址：深圳市宝安区沙井街道万丰98工业城21栋 天线规格承认书 Antenna Specification for Approval 客户名称 CustomerName：深圳市魔样科技有限公司 产品名称： ProductName： 2.4G天线 全长25mm红色 客户型号： ProductName: 产品料号： Part NO.: C10- 35- 2.5 制 表 ： WriteBy：庄杰彬 日 期： IssuedDate: 2021- 10-08 客 户: 工程R& D Dept 采购Business Dept 承认 Approved By 一线通 研发R& D Dept 工程 Engineer Dept 审核 Approval 庄彩虹 庄杰彬 庄杰彬 Product Specification A. ElectricalCharacteristics Frequency 2400MHz ~2500MHz VSWR<3.0 Efficiency >30% Impedance 50 Ohm Polarization Line Gain 0DBi B. Material & MechanicalCharacteristics Material of Radiator Cu Cable Type 1.0 19P 红 Connector Type : NO Dimension C. Environmental Operation Temperature - 30 °C ~ + 80 ° CStorage Temperature - 30 ° C~+ 85 °C Test Equipment & Conditions 1. NetworkAnalyzers: Agilent 8753D 5071C 2. Communications TestSet: Agilent E5525C 3. 3D Chamber TestSystem Effiency& Gain Radiation Pattern:

Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 56 TEST REPORT Compiled by: Reviewed by: Approved by: Zhou Kui Arron Liu Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Smart Watch FCC ID: 2BD9X-FOX-MT95 Trademark: N/A Model Number: MT95, MT110, MT120, MT130, MT140 Prepared For: Shenzhen Fuxuntong Electronics Co.,Ltd Address: 619.6/F, Xingzhan Business Distriet, Building C2, Zhonghao New Town, Bantian Street, Longgang District, Shenzhen Manufacturer: Shenzhen Fuxuntong Electronics Co.,Ltd Address: 619.6/F, Xingzhan Business Distriet, Building C2, Zhonghao New Town, Bantian Street, Longgang District, Shenzhen Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Oct. 16, 2025 Sample tested Date: Oct. 16, 2025 to Nov. 03, 2025 Issue Date: Nov. 03, 2025 Report No.: CTB25101608001RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25101608001RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 56 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ....................................................................................................................... 4 2. TEST SUMMARY .......................................................................................................... 5 3. MEASUREMENT UNCERTAINTY .............................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ....................................................... 7 4.1 Product Information ................................................................................................................. 7 4.2 Test Setup Configuration ....................................................................................................... 7 4.3 Support Equipment .................................................................................................................. 7 4.4 Channel List ............................................................................................................................... 8 4.5 Test Mode .................................................................................................................................. 8 4.6 Test Environment ..................................................................................................................... 8 5. TEST FACILITY AND TEST INSTRUMENT USED .................................................. 9 5.1 Test Facility................................................................................................................................ 9 5.2 Test Instrument Used ............................................................................................................. 9 6. AC POWER LINE CONDUCTED EMISSION ......................................................... 12 6.1 Block Diagram Of Test Setup ............................................................................................. 12 6.2 Limit ........................................................................................................................................... 12 6.3 Test procedure ........................................................................................................................ 12 6.4 Test Result ............................................................................................................................... 14 7. RADIATED SPURIOUS EMISSION ......................................................................... 16 7.1 Block Diagram Of Test Setup ............................................................................................. 16 7.2 Limit ........................................................................................................................................... 16 7.3 Test procedure ........................................................................................................................ 17 7.4 Test Result ............................................................................................................................... 18 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ....................... 27 8.1 Block Diagram Of Test Setup ............................................................................................. 27 8.2 Limit ........................................................................................................................................... 27 8.3 Test procedure ........................................................................................................................ 27 8.4 Test Result ............................................................................................................................... 28 9. CONDUCTED PEAK OUTPUT POWER ................................................................. 35 9.1 Block Diagram Of Test Setup ............................................................................................. 35 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25101608001RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 56 9.2 Limit ..........................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: MT95 Radiated Emission Below 1G Above 1G Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions RF Conducted