2BDEB-GSTPMS Sensor

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Shenzhen Hanyang Semiconductor Co. LTD Address: Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Phone: +86-755-21536945 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-12-18 Name / Title: Zhen Li / Manager Company: Shenzhen Hanyang Semiconductor Co. LTD Address: Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Phone: +86-755-21536945 Fax: N/A Email: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BDEB-GS GS02, GS03, GS07, GS08 We, applicant Company Name: Shenzhen Hanyang Semiconductor Co. LTD Address: Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Phone: +86-755-21536945 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-12-22 Name / Title: Zhen Li / Manager Company: Shenzhen Hanyang Semiconductor Co. LTD Address: Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Phone: +86-755-21536945 Fax: N/A Email: [email protected]

Shenzhen Hanyang Semiconductor Co. LTD Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Date: December 18, 2023 FCC ID: 2BDEB-GS Model Number: GS02, GS03, GS07, GS08 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Hanyang Semiconductor Co. LTD hereby declare that our product (TPMS Sensor) Model Number: GS02, GS03, GS07, GS08 board, Schematic, Hardware version, Software version, structure and internal photos are same, named and appearance differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Zhen Li / Manager Company: Shenzhen Hanyang Semiconductor Co. LTD Address: Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Tel: +86-755-21536945 Fax: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BDEB-GS GS02, GS03, GS07, GS08 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-12-22 Name / Title: Zhen Li / Manager Company: Shenzhen Hanyang Semiconductor Co. LTD Address: Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Phone: +86-755-21536945 Fax: N/A Email: [email protected]

Page1of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7

Page1of1FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L0.5cmx0.5cm) LabelLocation TPMSSensor Model:GS02 FCCID:2BDEB-GS

Page1of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity InternalPhotosoftheEUT Fig.1 Fig.2 Page2of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Antenna Page4of4FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 Fig.8

Page1of3FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCRFExposureEvaluation 1.ProductInformation EUT:TPMSSensor TestModel: GS02 AdditionalModelNo.: GS03,GS07,GS08 ModelDeclaration : PCBboard,structureandinternalofthesemodel(s)arethesame, Sonoadditionalmodelsweretested Hardwareversion: V1.0 Softwareversion: V1.0 PowerSupply: DC3VByCR2032Battery 433MHzOperationfrequency:433.92MHz ModulationType:ASK ChannelNumber:1 AntennaType:SpringAntenna,0.5dBi(Max) Exposurecategory:Generalpopulation/uncontrolledenvironment EUTType:ProductionUnit DeviceType : PortableDevice Page2of3FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity 2.EvaluationmethodandLimit AccordingtoKDB447498D01GeneralRFExposureGuidancev06Section4.3.1Standalone SARtestexclusionconsiderations:“UnlessspecificallyrequiredbythepublishedRFexposure KDBprocedures,standalone1-gheadorbodyand10-gextremitySARevaluationforgeneral populationexposureconditions,bymeasurementornumericalsimulation,isnotrequiredwhen thecorrespondingSARTestExclusionThresholdcondition,listedbelow,issatisfied.Thesetest exclusionconditionsarebasedonsource-basedtime-averagedmaximumconductedoutput poweroftheRFchannelrequiringevaluation,adjustedfortune-uptolerance,andtheminimum testseparationdistancerequiredfortheexposureconditions.22Theminimumtestseparation distanceisdeterminedbythesmallestdistancefromtheantennaandradiatingstructuresor outersurfaceofthedevice,accordingtothehostformfactor,exposureconditionsandplatform requirements,toanypartofthebodyorextremityofauserorbystander(see5)ofsection4.1). ToqualifyforSARtestexclusion,thetestseparationdistancesappliedmustbefullyexplained andjustifiedbytheoperatingconfigurationsandexposureconditionsofthetransmitterand applicablehostplatformrequirements,typicallyintheSARmeasurementorSARanalysisreport, accordingtotherequiredpublishedRFexposureKDBprocedures.WhennootherRFexposure testingorreportingisrequired,astatementofjustificationandcompliancemustbeincludedin theequipmentapproval,inlieuoftheSARreport,toqualifyfortheSARtestexclusion.When required,thedevicespecificconditionsdescribedintheotherpublishedRFexposureKDB proceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusionprovisions;forexample, handheldPTTtwo-wayradios,handsets,laptops&tabletsetc.“ [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,where: •f(GHz)istheRFchanneltransmitfrequencyinGHz •PoweranddistanceareroundedtothenearestmWandmmbeforecalculation •Theresultisroundedtoonedecimalplaceforcomparison •3.0and7.5arereferredtoasthenumericthresholdsinthestep2below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm andfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmaccordingtof)insection4.1isappliedto determineSARtestexclusion. Whenoneofthefollowingtestexclusionconditionsissatisfiedforallcombinationsof simultaneoustransmissionconfigurations,furtherequipmentapprovalisnotrequiredto incorporatetransmittermodulesinhostdevicesthatoperateinthemixedmobileandportable hostplatformexposureconditions.Thegranteeisresponsiblefordocumentingthisaccording toClassIpermissivechangerequirements.AntennasthatqualifyforstandaloneSARtest exclusionmustapplytheestimatedstandaloneSARtodeterminesimultaneoustransmission testexclusion. a)The[∑of(thehighestmeasuredorestimatedSARforeachstandaloneantenna configuration,adjustedformaximumtune-uptolerance)/1.6W/kg]+[∑ofMPEratios]is≤1.0. b)TheSARtopeaklocationseparationratiosofallsimultaneouslytransmittingantennapairs operatinginportabledeviceexposureconditionsareall≤0.04,andthe[∑ofMPEratios]is≤1.0. 3.ReferEvaluationMethod ANSIC95.1–1999:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoRadioFrequency ElectromagneticFields,3kHzto300GHz. FCCKDBpublication447498D01General1RFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1093:Radiofrequencyradiationexposureevaluation:portabledevices Page3of3FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity 4.TestResults Note:1.PoutEIRP(dBm)=FieldstrengthofFundamental(dBuV/m@3)-95.2 2.ERP=EIRP-2.15dB 5.EvaluationResults Band/Modef(GHz) Antenna Distance (mm) RFoutputpowerSARTest Exclusion Threshold SARTest Exclusion dBmmW ASK 0.433925 -340.0004 0.0001<3.0Yes Remark: 1.Outputpowerincludingtuneuptolerance; 2.Whentheminimumtestseparationdistanceis<5mm,adistanceof5mmaccordingtof)in section4.1isappliedtodetermineSARtestexclusion. 6.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1093fortheuncontrolledRFExposureand SARExclusionThresholdperKDB447498v06. .......................THEENDOFREPORT......................... ModeFrequency(MHz)Fieldstrength(dBuV/m@3)TransmitPowerindBm ASK433.9261.45-35.9 Frequency(MHz) 433.92 Target(dBm) -35 Tolerance±(dB) 1.0

Gain:0.5dBi Shenzhen Hanyang Semiconductor Co. LTD Rm 401, Building 18, Wangtang Industrial Zone, Xili Street, Nanshan District, Shenzhen, Guangdong, China Model: GS02 Product Name: TPMS Sensor We statement all measurements were performed radiated and therefore additional antenna gain documentation is not required.

Page1of27FCCID:2BDEB-GSReportNo.:LCSA11033051EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT For ShenzhenHanyangSemiconductorCo.LTD TPMSSensor TestModel:GS02 AdditionalModelNo.:GS03,GS07,GS08 Preparedfor:ShenzhenHanyangSemiconductorCo.LTD Address:Rm401,Building18,WangtangIndustrialZone,XiliStreet,Nanshan District,Shenzhen,Guangdong,P.R.China Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330 Fax:(+86)755-82591332 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:November03,2023 Numberoftestedsamples:A11033051-1,A11033051-2 Serialnumber:Prototype DateofTest:November03,2023~November21,2023 DateofReport:November21,2023 Page2of27FCCID:2BDEB-GSReportNo.:LCSA11033051EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT FCCCFR47PART15C15.231(e) ReportReferenceNo. .................. :LCSA11033051EA DateofIssue .................................... :November21,2023 TestingLaboratoryName...........:ShenzhenLCSComplianceTestingLaboratoryLtd. Address.............................................: 101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China TestingLocation/Procedure......... :FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName..........................:ShenzhenHanyangSemiconductorCo.LTD Address.............................................:Rm401,Building18,WangtangIndustrialZone,XiliStreet, NanshanDistrict,Shenzhen,Guangdong,P.R.China TestSpecification Standard...........................................:FCCCFR47PART15SubpartC,ANSIC63.10-2013 TestReportFormNo...................:LCSEMC-1.0 TRFOriginator.................................:ShenzhenLCSComplianceTestingLaboratoryLtd. MasterTRF ...................................... :Dated2011-03 ShenzhenLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceof thematerial.ShenzhenLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnot assumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialdueto itsplacementandcontext. TestItemDescription..................:TPMSSensor TradeMark.......................................:N/A TestModel.......................................:GS02 Ratings..............................................:DC3VByCR2032Battery Result................................................:Positive Compiledby:Supervisedby:Approvedby: LiHuan/AdministratorCaryLuo/TechniqueprincipalGavinLiang/Manager Page3of27FCCID:2BDEB-GSReportNo.:LCSA11033051EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCC--TESTREPORT EUT.........................................:TPMSSensor TestModel...........................:GS02 Applicant...............................:ShenzhenHanyangSemiconductorCo.LTD Address..................................: Rm401,Building18,WangtangIndustrialZone,XiliStreet, NanshanDistrict,Shenzhen,Guangdong,P.R.China Telephone...............................:/ Fax..........................................:/ Manufacturer.......................:ShenzhenHanyangSemiconductorCo.LTD Address...................................:Rm401,Building18,WangtangIndustrialZone,XiliStreet, NanshanDistrict,Shenzhen,Guangdong,P.R.China Telephone...............................:/ Fax..........................................:/ Factory....................... :ShenzhenHanyangSemiconductorCo.LTD Address...................................:Rm401,Building18,WangtangIndustrialZone,XiliStreet, NanshanDistrict,Shenzhen,Guangdong,P.R.China Telephone...............................:/ Fax..........................................:/ TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. TestReportNo.:LCSA11033051EA November21,2023 Dateofissue Page4of27FCCID:2BDEB-GSReportNo.:LCSA11033051EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity RevisionHistory ReportVersionIssueDateRevisionContentRevisedBy 000November21,2023InitialIssue-- Page5of27FCCID:2BDEB-GSReportNo.:LCSA11033051EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TABLEOFCONTENTS 1.GENERALINFORMATION.....................................................................................................................................6 1.1.DESCRIPTIONOFDEVICE(EUT).........................................................................................................................6 1.2.OBJECTIVE ............................................................................................................................................................ 6 1.3.ENVIRONMENTALCONDITIONS..................…

Text truncated - open the document above for the full version.

Page1of1FCCID:2BDEB-GS ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestSetupPhotosoftheEUT TestSetupPhoto(s)ofRadiatedEmissionsMeasurement Fig.1 Fig.2