2BDLT-R7SRobotic Vacuum Cleaner

ROBOTIC VACUUM CLEANER INSTRUCTIONS MANUAL T1 Email：[email protected] Email：[email protected] Operating and Programming Please clean all the obstacles and cable before turning on the machine, and remove all the unstable, fragile, and dangerous items. Avoiding the machine is twine or stuck or dragged causing personal or property damage. Note: During the first cleaning process, please follow the robot vacuum for the entire process to assist in handling some possible small problems. After handling, the robot vacuum can smoothly do autonomous cleaning in future cleaning. personal or property damage caused by the machine falling. Before using this product, please read the following safety instructions and follow all standard safety precautions. Please read this instructions manual carefully and keep it properly. Safety Introduction Any operation that does not comply with this instructions manual may result in damage to the product. 1.Only authorized technicians are allowed to disassemble the product, and users are not recommended to disassemble it themselves. 2.The product only applies the original power adapter provided by the manufacturer; otherwise, it may cause damage to the product. 3.Do not touch the power cord, socket or power adapter with wet hands. 4.Please do not allow curtains or any part of your body to get caught in the product's driving wheels during use. 5.Please keep the product away from cigarettes, lighters, and other open flames. 6.Please clean the product after charging is complete. 7.Please do not bend the wire, or put weight or sharps on the machine. 8.The product is for indoor use instead of outdoor. 9.Please do not sit on the product. 10.Do not use the product in damp environments, such as bathrooms. 11.Before using the product, please remove all vulnerable and fragile items on the floor, such as glass cups and lamps, etc as well as any objects that may entangle the side brush or block the fan port, such as electrical wires, paper scraps, and curtains. 12.Please do not put the product on the place where it tends to fall, for example, on the table or chair. 13.Please carefully check if the power adapter is properly connected to the socket before use, otherwise it may cause damage to the battery. 14.Please notify other members in the house before using the product to prevent tripping. 15.Please empty the dust box before using the product. 16.The product is designed to operate at a temperature of 0 to 40 °C. 17.Please do not use the product in high-temperature environments. 18.Please remove the battery from the machine before discarding the product. 19.Please make sure that the product is not connected to a power supply when removing the batteries. 20.Please recycle the used batteries safely. Notice: 1.Only use the manufacturer's original rechargeable battery and docking station. It is strictly prohibited to use non-rechargeable batteries. Please refer to the "Product Parameters" for battery specifications. 2.Do not use the product in an environment with open flames or fragile items. 3.Do not use the product in extremely hot (above 40°C) or cold (below 0°C) environments. 4.Do not allow human hair, clothing, fingers, or any other body parts to come close to the product's openings and operating parts. 5.Do not use the product on wet or flooded ground. 6.Do not allow the product to suck up any items that may clog the product, such as stones or waste paper. 7.Do not allow the product to suck up any flammable materials, such as gasoline, toner used in printers or copiers. Do not use the product in a cleaning area with flammable materials. 8.Do not allow the product to suck up any burning items, such as cigarettes, matches, ashes, or other items that may cause a fire. 9.Do not place anything at the suction port. Do not use the product when the suction port is blocked. Clean the dust, cotton, hair, etc. from the suction port to ensure smooth air flow. 10.Handle the power cord with care to avoid damage. Do not drag or pull the product or charging dock using the power cord. Do not use the power cord as a handle, clip the power cord in a door seam, or pull the power cord around sharp corners. Do not operate the product on the power cord and keep the power cord away from heat sources. 11.Do not use a damaged docking station. 12.Even if the product is severely damaged, it is prohibited to burn it, as the product battery may cause an explosion. 13.Users are not allowed to replace the lithium battery inside the machine at will. If a battery replacement is needed, please contact the after-sales department. 14.Only use the original manufacturer's power adapter GQ12-190060-VC and DBS012A-1900600C. Warning: 12 3.1 Appliance Charging...................................................................................................................................05 3.2 Pause, Wake up and Power off...............................................................................................................07 3.3 Start Cleaning...............................................................................................................................................08 4.1 Dust Box.........................................................................................................................................................10 4.2 Charging Contacts, Anti-drop Sensors, Driving Wheels and Universal Wheel ...................... 5 13 Troubleshooting 6 14 Product Parameters 7 15 Accessories Introduction 202 Preparation 304 Equipment Installation 410 Product Contents 101 Table of Contents Instruction 01 1 x Docking station 2 x AAA Batteries 2 x Side brush 1 x Remote control (without battery) 1 x Dust box (In the machine) 1 x Appliance 1 x Power adapter 1 x Cleaning brush 1.Product Contents Infrared sensor Infrared sensor 02 Bottom View Front View Dust box Anti-drop sensors Side brush Driving wheels Charging contacts Universal wheel Battery Power button Top cover Docking 2.…

Text truncated - open the document above for the full version.

Zhongshan jianduan intelligent robot Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/13/2024 U.S. Agent Designation Zhongshan jianduan intelligent robot Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BDLT-R7S): Name and company of U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Zhongshan jianduan intelligent robot Co.,Ltd. Zhongshan jianduan intelligent robot Co.,Ltd with the FRN 0034489229 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. S incerely, Signature Jiaying Li Project manager Zhongshan jianduan intelligent robot Co.,Ltd Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Zhongshan jianduan intelligent robot Co., Ltd Address: 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Phone: +86-13924210913 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-13 Name / Title: Jiaying Li / Product Manager Company: Zhongshan jianduan intelligent robot Co., Ltd Address: 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Phone: +86-13924210913 Fax: N/A E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BDLT-R7S R7S, T1, T1C, T1S, T1pro, T2, T2C, T2S, T2pro, T3, T3C, T3S, T3pro, T4, T4C, T4S, T4pro, T5, T5C, T5S, T5pro, T6, T6C, T6S, T6pro, T7, T7S, T7c, T7pro, T8, T8C, T8S, T8pro, T9, T9C, T9S, T9pro, T10, T10C, T10S, T10pro, T11, T11C, T11S, T11pro, T12, T12C, T12S, T12pro, T13, T13C, T13S, T13pro, T14, T14C, T14S, T14pro, T15, T15C, T15S, T15pro, T16, T16C, T16S, T16pro, T17, T17C, T17S, T17pro, T18, T18C, T18S, T18pro, T19, T19C, T19S, T19pro, T20, T20C, T20S, T20pro We, applicant Company Name: Zhongshan jianduan intelligent robot Co., Ltd Address: 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Phone: +86-13924210913 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-13 Name / Title: Jiaying Li / Product Manager Company: Zhongshan jianduan intelligent robot Co., Ltd Address: 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Phone: +86-13924210913 Fax: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BDLT-R7S R7S, T1, T1C, T1S, T1pro, T2, T2C, T2S, T2pro, T3, T3C, T3S, T3pro, T4, T4C, T4S, T4pro, T5, T5C, T5S, T5pro, T6, T6C, T6S, T6pro, T7, T7S, T7c, T7pro, T8, T8C, T8S, T8pro, T9, T9C, T9S, T9pro, T10, T10C, T10S, T10pro, T11, T11C, T11S, T11pro, T12, T12C, T12S, T12pro, T13, T13C, T13S, T13pro, T14, T14C, T14S, T14pro, T15, T15C, T15S, T15pro, T16, T16C, T16S, T16pro, T17, T17C, T17S, T17pro, T18, T18C, T18S, T18pro, T19, T19C, T19S, T19pro, T20, T20C, T20S, T20pro For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-13 Name / Title: Jiaying Li / Product Manager Company: Zhongshan jianduan intelligent robot Co., Ltd Address: 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Phone: +86-13924210913 Fax: N/A E-Mail: [email protected]

Page 1 of 1 Rev.2.0 Zhongshan jianduan intelligent robot Co., Ltd WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BDLT-R7S Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Jiaying Li / Project Manager Signature: Phone: +86-13924210913 Email: [email protected] Date: 2024-05-13

Zhongshan jianduan intelligent robot Co., Ltd 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Date: May 13, 2024 FCC ID: 2BDLT-R7S Model Number: R7S, T1, T1C, T1S, T1pro, T2, T2C, T2S, T2pro, T3, T3C, T3S, T3pro, T4, T4C, T4S, T4pro, T5, T5C, T5S, T5pro, T6, T6C, T6S, T6pro, T7, T7S, T7c, T7pro, T8, T8C, T8S, T8pro, T9, T9C, T9S, T9pro, T10, T10C, T10S, T10pro, T11, T11C, T11S, T11pro, T12, T12C, T12S, T12pro, T13, T13C, T13S, T13pro, T14, T14C, T14S, T14pro, T15, T15C, T15S, T15pro, T16, T16C, T16S, T16pro, T17, T17C, T17S, T17pro, T18, T18C, T18S, T18pro, T19, T19C, T19S, T19pro, T20, T20C, T20S, T20pro To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Zhongshan jianduan intelligent robot Co., Ltd hereby declare that our product (Robotic Vacuum Cleaner) Model Number: R7S, T1, T1C, T1S, T1pro, T2, T2C, T2S, T2pro, T3, T3C, T3S, T3pro, T4, T4C, T4S, T4pro, T5, T5C, T5S, T5pro, T6, T6C, T6S, T6pro, T7, T7S, T7c, T7pro, T8, T8C, T8S, T8pro, T9, T9C, T9S, T9pro, T10, T10C, T10S, T10pro, T11, T11C, T11S, T11pro, T12, T12C, T12S, T12pro, T13, T13C, T13S, T13pro, T14, T14C, T14S, T14pro, T15, T15C, T15S, T15pro, T16, T16C, T16S, T16pro, T17, T17C, T17S, T17pro, T18, T18C, T18S, T18pro, T19, T19C, T19S, T19pro, T20, T20C, T20S, T20pro board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Jiaying Li / Product Manager Company: Zhongshan jianduan intelligent robot Co., Ltd Address: 3rd Floor, No 3 Jiangong 3rd Street, South District, Zhongshan, Guangdong, China Tel: +86-13924210913 Fax: N/A E-Mail: [email protected]

Page1of6FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of6FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of6FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of6FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 Fig.8 Page5of6FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.9 Fig.10 Page6of6FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.11

FCC ID:2BDLT-R7S Made in China Robotic Vacuum Cleaner Rated Voltage:14.4V Power input:19V 0.6A Battery:2550mAh Mode:R7S Zhongshan jianduan intelligent robot Co.,Ltd Rated Power:35W

Page1of5FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity MaximumPermissibleExposureReport 1.ProductInformation EUT:RoboticVacuumCleaner TestModel:R7S AdditionalModelNo.:T1,T1C,T1S,T1pro,T2,T2C,T2S,T2pro,T3,T3C,T3S,T3pro,T4, T4C,T4S,T4pro,T5,T5C,T5S,T5pro,T6,T6C,T6S,T6pro,T7,T7S, T7c,T7pro,T8,T8C,T8S,T8pro,T9,T9C,T9S,T9pro,T10,T10C, T10S,T10pro,T11,T11C,T11S,T11pro,T12,T12C,T12S,T12pro, T13,T13C,T13S,T13pro,T14,T14C,T14S,T14pro,T15,T15C, T15S,T15pro,T16,T16C,T16S,T16pro,T17,T17C,T17S,T17pro, T18,T18C,T18S,T18pro,T19,T19C,T19S,T19pro,T20,T20C, T20S,T20pro ModelDeclaration:PCBboard,structureandinternalofthesemodel(s)arethesame,Sono additionalmodelsweretested PowerSupply:Input:19V0.6A35W ForAdapterModel:XHD15-190060-A Input:100-240V~,50/60Hz,0.8A Output:19V0.6A ForAdapterModel:BZ015-190060-AU Input:100-240V~,50/60Hz,0.35AMax Output:19.0V0.6A Battery:14.4V,2550mAh HardwareVersion:R7S-M-V1.0-2024-03-22 SoftwareVersion:V1.5.5 Bluetooth FrequencyRange:2402MHz~2480MHz ChannelNumber:40channelsforBluetoothV4.2(DTS) ChannelSpacing:2MHzforBluetoothV4.2(DTS) ModulationType:GFSKforBluetoothV4.2(DTS) BluetoothVersion:V4.2 AntennaDescription:InternalAntenna,2.5dBi(Max.) WIFI(2.4GBand) FrequencyRange:2412MHz~2462MHz ChannelSpacing:5MHz ChannelNumber:11Channelsfor20MHzbandwidth(2412~2462MHz) ModulationType:IEEE802.11b:DSSS(CCK,DQPSK,DBPSK) IEEE802.11g:OFDM(64QAM,16QAM,QPSK,BPSK) IEEE802.11n:OFDM(64QAM,16QAM,QPSK,BPSK) AntennaDescription:InternalAntenna,2.5dBi(Max.) Exposurecategory : Generalpopulation/uncontrolledenvironment EUTType : ProductionUnit Page2of5FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity DeviceType : MobileDevices 2.EvaluationMethod SystemsoperatingundertheprovisionsofFCC47CFRsectionshallbeoperatedinamannerthatensures thatthepublicisnotexposedtoradiofrequencyenergylevelinexcessoftheCommission’sguidelines. Inaccordancewith47CFRFCCPart2SubpartJ,section2.1091thisdevicehasbeendefinedasmobile devicewherebyadistanceof0.2mnormallycanbemaintainedbetweentheuserandthedevice,andbelow RFPermissibleExposurelimitshallcomplywith. InaccordancewithKDB447498D01forSimultaneoustransmissionMPEtestexclusionapplieswhenthe sumoftheMPEratiosforallsimultaneoustransmittingantennasincorporatedinahostdevice,basedonthe calculated/estimated,numericallymodelledormeasuredfieldstrengthsorpowerdensity,is≤1.0.TheMPE ratioofeachantennaisdeterminedattheminimumtestseparationdistancerequiredbytheoperating configurationsandexposureconditionsofthehostdevice,accordingtotheratiooffieldstrengthsorpower densitytoMPElimit,atthetestfrequency.Eitherthemaximumpeakorspatiallyaveragedresultsfrom measurementsornumericalsimulationsmaybeusedtodeterminetheMPEratios.Spatialaveragingdoes notapplywhenMPEisestimatedusingsimplecalculationsbasedonfar-fieldplane-waveequivalent conditions.Theantennainstallationandoperatingrequirementsforthehostdevicemustmeettheminimum testseparationdistancesrequiredbyallantennas,inbothstandaloneandsimultaneoustransmission operations,tosatisfycompliance. 3.Limit 3.1ReferEvaluationMethod ANSIC95.1–2019:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoElectric,Magnetic, andElectromagneticFields,0Hzto300GHz FCCKDBpublication447498D01General1RFExposureGuidancev06:MobileandPortableDevicesRF ExposureProceduresandEquipmentAuthorizationPolicies. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1091:Radiofrequencyradiationexposureevaluation:mobiledevices. 3.2Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100)* (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/UncontrolledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100)* (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 Page3of5FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity F=frequencyinMHz *=Plane-waveequivalentpowerdensity 4.MPECalculationMethod PredicationofMPElimitatagivendistance Equationfrompage18ofOETBulletin65,Edition97-01 S=PG/4πR² Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator R=distancetothecenterofradiationoftheantenna 5.AntennaInformation EUTcanonlyuseantennascertificatedasfollowsprovidedbymanufacturer; Internal/External Identification Antennatypeand antennanumber Operatefrequencyband Maximumantenna gain Notes InternalInternalAntenna2400-2500MHz2.5dBi BT/WIFI Antenna 6.ConductedPower [BLE] ModeChannel Frequency (MHz) PeakConductedOutputPower (dBm) GFSK 0024020.39 1924400.72 3924800.87 [2.4GWLAN] ModeChannelFrequency(MHz) PeakConductedOutput Power(dBm) IEEE802.11b 1241215.89 6243715.68 11246215.31 IEEE802.11g 1241214.69 6243714.13 11246214.85 IEEE802.11n HT20 1241213.11 6243713.35 11246213.2 Page4of5FCCID:2BDLT-R7S ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|…

Text truncated - open the document above for the full version.

Page 1 SHANGHAI DEMAN INFORMATION TECHNOLOGY CO.,LTD. A ddress: Roo m 701, Building 3, More Center, No.87 GuDun Road, Hangzhou, Zhejiang, China PRODUCT NAME:WBR3 ANTENNA ANTENNA TYPE:PCB WRITED: Long Wang DATE:20190520 VERSIONS:A MAN U FA C T U RER: Hangzhou Tuya Information Technolohgy Co., Ltd. Page 2 Measurement data Frequency (MHz) 240024502500 Return Loss-8.73-11.76-11.21 VSWR 2.161.711.77 Page 3 Antenna Size Test SetupAntenna Size Page 4 Directivity Diagram 2D YZ XY XZ Page 5 Radiation pattern 3D Page 6 Freq.（MHz）Effi(%)Gain (dBi) 2400 52.29 1.62 2410 52.17 1.71 2420 53.14 1.93 2430 54.16 1.98 2440 57.62 2.00 2450 59.64 2.17 2460 61.55 2.45 2470 60.64 2.38 2480 62.86 2.50 2490 59.85 2.30 2500 60.41 2.49 Efficiency&Gain

Page1of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity AppendixA RFTestDataforBTLE(ConductedMeasurement) ProductName:RoboticVacuumCleaner TestModel:R7S EnvironmentalConditions Temperature: 23.8  C RelativeHumidity:52.3% ATMPressure:100.0kPa TestEngineer:EasonZhou Supervisedby:NickPeng Page2of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity A.1-6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTBLE1M2402Ant10.705>=0.5Pass NVNTBLE1M2440Ant10.706>=0.5Pass NVNTBLE1M2480Ant10.699>=0.5Pass Page3of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestGraphs -6dBBandwidthNVNTBLE1M2402MHzAnt1 -6dBBandwidthNVNTBLE1M2440MHzAnt1 Page4of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity -6dBBandwidthNVNTBLE1M2480MHzAnt1 Page5of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity A.2MaximumPeakConductedOutputPower ConditionModeFrequency(MHz)AntennaConductedPower(dBm)Limit(dBm)Verdict NVNTBLE1M2402Ant10.3930Pass NVNTBLE1M2440Ant10.7230Pass NVNTBLE1M2480Ant10.8730Pass Page6of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestGraphs PowerNVNTBLE1M2402MHzAnt1 PowerNVNTBLE1M2440MHzAnt1 Page7of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity PowerNVNTBLE1M2480MHzAnt1 Page8of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity A.3MaximumPowerSpectralDensityLevel ConditionModeFrequency(MHz)AntennaConductedPSD(dBm/3kHz)Limit(dBm/3kHz)Verdict NVNTBLE1M2402Ant1-14.638Pass NVNTBLE1M2440Ant1-14.458Pass NVNTBLE1M2480Ant1-14.248Pass Page9of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestGraphs PSDNVNTBLE1M2402MHzAnt1 PSDNVNTBLE1M2440MHzAnt1 Page10of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity PSDNVNTBLE1M2480MHzAnt1 Page11of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity A.4BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-56.5-20Pass NVNTBLE1M2480Ant1-57.16-20Pass Page12of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TestGraphs BandEdgeNVNTBLE1M2402MHzAnt1Ref BandEdgeNVNTBLE1M2402MHzAnt1Emission Page13of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity BandEdgeNVNTBLE1M2480MHzAnt1Ref BandEdgeNVNTBLE1M2480MHzAnt1Emission Page14of23FCCID:2BDLT-R7SReportNo.:LCSA04174029EA ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755…

Text truncated - open the document above for the full version.