2BDPR-ZP-SP-EVoutdoor TV

Shenzhen Meidewei Precision Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [March 27, 2026] U.S. Agent Designation [Shenzhen Meidewei Precision Technology Co.,Ltd] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BDPR-ZP-SP-EV Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Meidewei Precision Technology Co.,Ltd]. [Shenzhen Meidewei Precision Technology Co.,Ltd] with the FRN [0034520759] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Joey Huang] [Huiying Fan] [Manager] [Director] [Shenzhen Meidewei Precision Technology Co.,Ltd] [GLOCERTS TECHNOLOGY INC]

Shenzhen Meidewei Precision Technology Co.,Ltd Model Difference Data：March 26, 2026 Product description: outdoor TV Model name: ZP55FSGHD, EVOTV55UHD, EVOTV65UHD, EVOTV75UHD, SPB55UHD, SPB65UHD, SPB75UHD, ZP55FSGHD, ZP65FSGHD, ZP75FSGHD Trade Name:N/A FCC ID: 2BDPR-ZP-SP-EV All the model are the same circuit and RF module, only the model names are different. Regards Sincerely Client’s signature : Client’s name / title : Joey Huang（Manager） Contact information / address： Room 101, Building A, Taishun Industrial Park. No. 569, Honghu Village, Xinqiang Community, Xinhu Street, Guangming District, Shenzhen

Shenzhen Meidewei Precision Technology Co.,Ltd (March 25, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BDPR-ZP-SP-EV [Shenzhen Meidewei Precision Technology Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Joey Huang Shenzhen Meidewei Precision Technology Co.,Ltd (March 25, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BDPR-ZP-SP-EV [Shenzhen Meidewei Precision Technology Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Joey Huang

Shenzhen Meidewei Precision Technology Co.,Ltd (March 25, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (outdoor TV / ZP55FSGHD, EVOTV55UHD, EVOTV65UHD, EVOTV75UHD, SPB55UHD, SPB65UHD, SPB75UHD, ZP55FSGHD, ZP65FSGHD, ZP75FSGHD / FCC ID: 2BDPR-ZP- SP-EV) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Joey Huang Title: Manager

Shenzhen Meidewei Precision Technology Co.,Ltd (March 25, 2026) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Joey Huang Title: Manager

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 5 Model: ZP55FSGHD External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 5 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 5

FCC ID LABEL: Label Location: FCC ID: 2BDPR-ZP-SP-EV Model No.: ZP55FSGHD This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2BDPR-ZP-SP-EV Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result EDR GFSK&LC H 5±1 6 3.9811 1.2078 (0.82dBi) 0.001 1 Pass BLE GFSK& LCH 2±1 3 1.9953 1.2078 (0.82dBi) 0.0005 1 Pass 2.4G WIFI ANT1 802.11b&2 412 16±1 17 50.1187 1.2078 (0.82dBi) 0.0121 1 Pass 2.4G WIFI ANT2 802.11n(H T20)&241 2 16±1 17 50.1187 1.2078 (0.82dBi) 0.0121 1 Pass 5.2GWIFI ANT1 802.11a&5 240 14±1 15 31.6228 1.4060 (1.48dBi) 0.0088 1 Pass 5.2GWIFI ANT2 802.11a&5 180 13±1 14 25.1189 1.4060 (1.48dBi) 0.007 1 Pass 5.8GWIFI ANT1 802.11a&5 825 17±1 18 63.0957 1.8072 (2.57dBi) 0.0227 1 Pass 5.8GWIFI ANT2 802.11ac2 0&5825 12±1 13 19.9526 1.8072 (2.57dBi) 0.0072 1 Pass For the Max simultaneous transmission MPE: When a number of sources at different frequencies, and/or broadband sources, contribute to the total exposure, it becomes necessary to weigh each contribution relative to the MPE in accordance with the provisions of Table (A) and Table (B). To comply with the MPE, the fraction of the MPE in terms of E2, H2 (or power density) incurred within each frequency interval should be determined and the sum of all such fractions should not exceed unity. In order to ensure compliance with the MPE for a controlled environment, the sum of the ratios of the power density to the corresponding MPE should not exceed unity. That is BT+WIFI supported simultaneous transmission: BT +2.4GWIFI MIMO: ∑MPE Ratio =0.001/1+0.0242/1=0.0252≤1, So passed. BT +5GWIFI MIMO: ∑MPE Ratio =0.001/1+0.0299/1=0.0309≤1, So passed. Tech nolo gy Tune up Produce power(dBm) Maximum Tune-up (dBm) Antenna Gain(ANT 1/ANT 2) (numeric) Power Density (S) (mW/ cm2) MPE Limit (mW/ cm2) ∑ MPE Ratio ∑ MPE Ratio Limit Result ANT 1 ANT 2 ANT 1 ANT 2 ANT 1 ANT 2 2.4G WIFI MIM O 16 ±1 16 ±1 17 17 1.2078 (0.82dBi) 0.0121 0.0121 1 0.0242 1 Pass Tech nolo gy Tune up Produce power(dBm) Maximum Tune-up (dBm) Antenna Gain(ANT 1/ANT 2) (numeric) Power Density (S) (mW/ cm2) MPE Limit (mW/ cm2) ∑ MPE Ratio ∑ MPE Ratio Limit Result ANT 1 ANT 2 ANT 1 ANT 2 ANT 1 ANT 2 5G WIFI MIM O 17 ±1 12 ±1 18 13 1.8072 (2.57dBi) 0.0227 0.0072 1 0.0299 1 Pass

6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFVFR/7' 7(/˖)$;˖  ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ ⡸ᵜ˖$ ᇒᡧ %7561/'4 ૱਽㿴Ṭ '(6&5,37,21 ᯉ ਧ 3$5712˖ ᇒ ᡧᯉਧ &863$5712˖ ᰕ ᵏ '$7 (˖ ੾ṭㆴㄖ ⶍ䦳 (1*,1((5,1*'(3$570(17 ⑩ᾅ 4 & '(3$570(17 ъ࣑ 6$/(6'(3$570(17 ᇘᡭᢵ䇚ㆴㄖ ⶍ䦳 (1*,1((5,1*'(3$570(17 ⑩ᾅ 4 & '(3$570(17 䟷䍝 385&+$6,1*'(3$570(17 áᇒᡧ⺞䇔ṧ૱䱴᜿ḿ˖ ᢯䇔Җ $33529$/ * * * *޵㖞)3& )3& )3& )3&ཙ㓯PP PP PP PP <6  深圳市壹创商显科技有限公司 YC030-0063 2025-06-01 6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFV FR/7' 7(/˖ )$;˖   ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ 䓝 鼠 傥 ㊯ 㞯 (OHFWULFDO6SHFLILFDWLRQV 根䌯劫⚜ 0+=)UHTXHQF\ 5DQJH0+= 䓝⌳樣㲊㭼 İ 96:5 İ ໎⳺ '%,*$,1'%, 弻ℍ旣(協)  ƻ,QSXW,PSHGDQFH ƻ 㛢 㡘 ㊯ 㞯 0HFKDQLFDO6SHFLILFDWLRQV ཙ㓯桄刚唁㢢 $QWHQQD&RORU%/$&. ㍍⎋入⺷ ,3(;,QSXWFRQQHFWRULSH[ ⶍἄ㷑⹎ ɗaɗ :RUNLQJ7HPSHUDWXUH ɗa ɗ ⶍἄ㸧⹎ a :RUNLQJ +XPLGLW\a ӗ૱മ⡷ Product image: 深圳市壹创商显科技有限公司 Electrical technical parameters 6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFV FR/7' 7(/˖ )$;˖   ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ 㿴Ṭമ˖ ⧟ໍາᙗ㜭⍻䈅    ProjectTest conditions Specification ۘᆈ⧟ໍາ ൘⋑ᴹᤷᇊⲴᛵߥл⍻䈅⑙ᓖǃ(t)ᓖǃ≄঻ྲл˖  ⑙ᓖѪć̚ć ⴨ሩ(t)ᓖѪ ≄঻ѪNSDNSD ⭥≄ᵪỠᙗ㜭↓ᑨ 儈վ⑙䈅傼 ൘ćоćѻ䰤䘋㹼⅑ᗚ⧟ˈ❦ਾ൘↓ᑨᶑԦл +ˈỰḕཆ㿲䍘䟿DŽ ቪረᓄ┑䏣㿴ᇊᒦᓄ ┑䏣┑䏣 ҾᵪỠǃ⭥≄ᙗ㜭 㙀ᚂᇊ(t)✝ 䈅傼 ⴨ሩ(t)ᓖfˈ䈅傼⑙ᓖ˖ćᤱ㔝+֌⭘ਾˈ 䈅૱ਆࠪਾPLQѻ޵⍻ᇊ⭥≄ᙗ㜭ˈ䈅૱൘↓ᑨᶑ Ԧл+ˈỰḕཆ㿲䍘䟿 ቪረᓄ┑䏣㿴ᇊᒦᓄ ┑䏣┑䏣 ҾᵪỠǃ⭥≄ᙗ㜭 ᥟࣘ䈅傼 ᥟ仁㤳ത+=ˈս〫ᑵ٬˖00ˈ࣐䙏ᓖᑵ٬˖ 06ˈᢛ仁ᗚ⧟⅑ᮠ˖⅑ ⭥≄ᵪỠᙗ㜭↓ᑨ 䏼㩭䈅傼0儈オ᤹➗ӂ⴨඲ⴤⲴ䖤ᯩੁ㠚⭡䏼㩭⅑⭥≄ᵪỠᙗ㜭↓ᑨ PP 深圳市壹创商显科技有限公司 深圳市壹创商显科技有限公司 YC030-0063 FPC 天线-L200 2025-6-1 Specification drawing: Environmental performance testing 6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFV FR/7' 7(/˖ )$;˖   ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ ṧ૱⍻䈅 Sample testing 㖁㔌࠶᷀⍻䈅˄ *˅Network analysis and testing(2.4G) 㖁㔌࠶᷀⍻䈅˄*˅Network analysis and testing(5.8G) 深圳市壹创商显科技有限公司 6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFVFR/7' 7(/˖)$;˖  ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ 深圳市壹创商显科技有限公司 6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFVFR/7' 7(/˖)$;˖  ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ 深圳市壹创商显科技有限公司 6KHQ]KHQ<X6KHQJ &RPPXQLFDWLRQV(OHFWURQLFV FR/7' 7(/˖ )$;˖   ᐕলൠ൰˖␡ൣᐲ嗉዇४⁚዇䭷ඣ㛼аᶁඣ㾯䐟ਧᾬ ␡ൣᐲ ␡ൣᐲ 䴘ⴋ䙊䇟⭥ᆀ 䴘ⴋ䙊䇟⭥ᆀ ᴹ䲀ޜਨ ᴹ䲀ޜਨ ⧟ໍາᙗ㜭⍻䈅   Environmental performance testing 亩ⴞ⍻䈅ᶑԦ㿴Ṭ ۘᆈ⧟ໍາ ൘⋑ᴹᤷᇊⲴᛵߥл⍻䈅⑙ᓖǃ(t)ᓖǃ≄঻ྲл˖  ⑙ᓖѪć̚ć ⴨ሩ(t)ᓖѪ ≄঻ѪNSDNSD ⭥≄ᵪỠᙗ㜭↓ᑨ 儈վ⑙䈅傼 ൘ćоćѻ䰤䘋㹼⅑ᗚ⧟ˈ❦ਾ൘↓ᑨᶑԦл +ˈỰḕཆ㿲䍘䟿DŽ ቪረᓄ┑䏣㿴ᇊᒦᓄ ┑䏣┑䏣 ҾᵪỠǃ⭥≄ᙗ㜭 㙀ᚂᇊ(t)✝ 䈅傼 ⴨ሩ(t)ᓖfˈ䈅傼⑙ᓖ˖ćᤱ㔝+֌⭘ਾˈ 䈅૱ਆࠪਾPLQѻ޵⍻ᇊ⭥≄ᙗ㜭ˈ䈅૱൘↓ᑨᶑ Ԧл+ˈỰḕཆ㿲䍘䟿 ቪረᓄ┑䏣㿴ᇊᒦᓄ ┑䏣┑䏣 ҾᵪỠǃ⭥≄ᙗ㜭 ᥟࣘ䈅傼 ᥟ仁㤳ത+=ˈս〫ᑵ٬˖00ˈ࣐䙏ᓖᑵ٬˖ 06ˈᢛ仁ᗚ⧟⅑ᮠ˖⅑ ⭥≄ᵪỠᙗ㜭↓ᑨ 䏼㩭䈅傼0儈オ᤹➗ӂ⴨඲ⴤⲴ䖤ᯩੁ㠚⭡䏼㩭⅑⭥≄ᵪỠᙗ㜭↓ᑨ 深圳市壹创商显科技有限公司

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 56 TEST REPORT Compiled by: Reviewed by: Approved by: Kai Chen Martin Feng Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Test item description: outdoor TV FCC ID: 2BDPR-ZP-SP-EV Trademark(s): N/A Model/Type reference: ZP55FSGHD, EVOTV55UHD, EVOTV65UHD, EVOTV75UHD, SPB55UHD, SPB65UHD, SPB75UHD, ZP65FSGHD, ZP75FSGHD Applicant’s name: Shenzhen Meidewei Precision Technology Co.,Ltd Address: Room 101, Building A, Taishun Industrial Park. No. 569, Honghu Village, Xinqiang Community, Xinhu Street, Guangming District, Shenzhen Manufacturer: Shenzhen Meidewei Precision Technology Co.,Ltd Address: Room 101, Building A, Taishun Industrial Park. No. 569, Honghu Village, Xinqiang Community, Xinhu Street, Guangming District, Shenzhen Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jan. 23, 2026 Sample tested Date: Jan. 23, 2026 to Mar. 13, 2026 Issue Date: Mar. 13, 2026 Report No.: CTB26012314601RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.:CTB26012314601RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 56 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................... 4 2. TEST SUMMARY ................................................................... 5 3. MEASUREMENT UNCERTAINTY ..................................................... 6 4. PRODUCT INFORMATION AND TEST SETUP .......................................... 7 4.1 Product Information .................................................................... 7 4.2 Test Setup Configuration ............................................................... 7 4.3 Support Equipment .................................................................... 7 4.4 Channel List .......................................................................... 8 4.5 Test Mode ............................................................................ 8 4.6 Test Environment ...................................................................... 8 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................... 9 5.1 Test Facility ........................................................................... 9 5.2 Test Instrument Used .................................................................. 9 6. AC POWER LINE CONDUCTED EMISSION ............................................ 12 6.1 Block Diagram Of Test Setup .......................................................... 12 6.2 Limit ................................................................................ 12 6.3 Test procedure ....................................................................... 12 6.4 Test Result .......................................................................... 14 7. RADIATED SPURIOUS EMISSION ................................................... 16 7.1 Block Diagram Of Test Setup .......................................................... 16 7.2 Limit ................................................................................ 16 7.3 Test procedure ....................................................................... 17 7.4 Test Result .......................................................................... 18 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS .......................... 27 8.1 Block Diagram Of Test Setup .......................................................... 27 8.2 Limit ................................................................................ 27 8.3 Test procedure ....................................................................... 27 8.4 Test Result .......................................................................... 28 9. COUDUCTED PEAK OUTPUT POWER ............................................... 35 9.1 Block Diagram Of Test Setup .......................................................... 35 9.2 Limit ................................................................................ 35 9.3 Test procedure ....................................................................... 35 9.4 Test Result .......................................................................... 35 10. 20DB OCCUPIED BANDWIDTH...................................................... 39 10.1 Block Diagram Of Test Setup ......................................................... 39 10.2 Limit ............................................................................... 39 10.3 Test procedure ...................................................................... 39 10.4 Test Result ......................................................................... 39 11. CARRIER FREQUENCIES SEPARATION ............................................. 43 11.1 Block Diagram Of Test Setup ......................................................... 43 11.2 Limit ............................................................................... 43 11.3 Test procedure ...................................................................... 43 11.4 Test Result ......................................................................... 43 12. HOPP…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: ZP55FSGHD Radiated Emission Below 1G Above 1G Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions RF Conducted