2BDQY-TA2C-CS8Tablet PC

1 Tablet PC Model: TA2C-CS8 2 Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the tablet PC. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. Reproduction in any manner whatsoever without the written permission from the manufacture is strictly forbidden. Product images in this manual are for your reference only. 3 Contents Directions ......................................................................... 2 Safety Precautions .......................................................... 5 1 Know Your Tablet PC .................................................. 9 2 Connect the Power Adapter ........................................ 8 3 Turn on the Tablet PC.................................................. 9 4 Get to Know Your System ......................................... 10 4-1 Add screen shortcuts ............................................ 13 4-2 Delete screen shortcuts/widgets .......................... 13 4-3 On-screen Keyboard ............................................ 14 5 Setting ......................................................................... 15 5-1 Network & Internet ................................................ 15 5-2 Connected Devices .............................................. 16 5-3 Apps & Notifications .................. 错误!未定义书签。 5-4 Battery .................................................................. 19 5-5 Display .................................................................. 19 5-6 Sound .................................................................... 19 4 5-7 Storage ................................................................. 19 5-8 DuraSpeed ............................................................ 19 5-9 Security & location................................................ 19 5-10 Users & accounts ............................................... 19 5-11 Accessibility ........................................................ 19 5-12 System ................................................................ 19 6 Chrome ........................................................................ 21 7 Fun ............................................................................... 22 7-1 Camera ................................................................. 22 7-2 Music..................................................................... 25 8 Appendix ..................................................................... 26 8-1 Troubleshooting .................................................... 26 8-2 Specifications ....................................................... 28 5 Safety Precautions 1. DO NOT press the Screen. DO NOT place the Tablet PC with small items, they may scratch the Screen. 2. DO NOT expose the Tablet PC to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place the Tablet PC on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of the Tablet PC. DO NOT shove any foreign objects into the Tablet PC. DO NOT cover the Screen strongly. 5. DO NOT expose the Tablet PC to strong magnetic or electrical fields; DO NOT place the floppy disk near or on the Tablet PC, that may loss the data of the floppy disk. 6. DO NOT leave the Tablet PC facing the sun as it can damage the Screen, especially in the car. 7. SAFE TEMP: This Tablet PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F). 8. DO NOT expose the Tablet PC to or use near liquids, rain, or moisture. Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 9. DO NOT throw the Tablet PC in municipal waste. Check local regulations for disposal of electronic products. 10. The Tablet PC and the Adapter may occur some heat during operating or charging. DO NOT leave the Tablet PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure. 11. INPUT RATING: Refer to the rating label on the Tablet PC and be sure that the Power Adapter complies with the rating. Only use attachments or accessories specified by the manufacturer. 6 12. Checking the connections between the main unit and attachments before turning on the Tablet PC. 13. DO NOT use the Tablet PC during eating food avoid dirtying the Tablet PC. 14. DO NOT insert anything into the Tablet PC that may result in short circuit or damage the circuit. 15. Power off the Tablet PC, if you want to install or remove some external devices which are not support hot-plug. 16. Disconnect the Tablet PC from the electrical outlet and remove any installed batteries before cleaning. And Keep it away from children. 17. DO NOT disassemble the Tablet PC, only a certified service technician should perform repairs on your computer. Otherwise, problem may result and the manufacturer should not hold responsibility for the damage. 18. The Tablet PC has some little metal flake to disperse heat. DO NOT place the Tablet PC on soft objects (e.g.: bed, sofa, your lap), or else the Tablet PC may become hot and halt the system operation. 19. The socket-outlet shall be installed near the equipment and shall be easily accessible. 20. To prevent possible hearing damage, do not listen at high volume levels for long periods. 21. If an equipment is provided with a replaceable battery, and if replacement by an incorrect type could result in an explosion (for example, with some lithium batteries). 7 This device complies with part 15 of the FCC Rules. Operation is subject to the following tw…

Text truncated - open the document above for the full version.

东莞市一佳电子通讯科技有限公司 Dongguan YiJia Electronics Communication Technology Co.,Ltd. 规格承认书 SPECIFICATION FOR APPROVAL 日期 Date 2023/06/21 编号 File No 23062102 版本 Revision 1.0 客户 CUSTOMER: 万利达 客户料号 CUSTOMER NO: SMB-P1006 品名 WIFI 1 Antenna L 193 0mm MHF 品名 PART NAME: WIFI 1 Antenna L=193.0mm MHF 供方料号 SUPPLIER NO: YJS01.005.064.302 送样日期 Date: 送样数量Q“TY: 客户确认CUSTOMER APPROVED BY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIER SIGNATURE APPROVALCHECKDESIGN add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 APPROVALCHECKDESIGN ChenGuoqiangXieLiChenXingyi YJ-RD-F04-A 承认书项目表 NO . 内容 （Contents） 页数 （Number of Page） 页码 （Page Code） 1 承认书封面（Spec Cover） 11 承认书封面（p） 2 承认书项目表（Spec Item ） 12 3 工程成品图（Drawing） 13 4 天线规格（Antenna Specification） 14 5 S参数测试（S Parameter ） 15 6 无源测试（Passive Test ） 26 ~ 7 7 方向图（Radiation Pattern ） 88 ~ 15 8 天线装配图（Antenna Profile） 316 ~ 18 9 材质证明（Mt ilC tifi t） 3919 579 材质证明（Material Certificate ） 3919 ~ 57 10 RoHS报告（RoHS Test Report ） **** 11N/AN/AN/A add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 12--- 13--- 天线规格 Antenna Specification Electrical Properties Frequency 2.4-2.5GHz 5155 85GHz5.15-5.85GHz Impedance50 Ohm Nominal V.S.W.R 2.0 [email protected] 4.0 [email protected] 41dBi@2425GH Gain 4.1 [email protected] 2.3 [email protected] RadiationOmni-directional PolarizationLinear Physical Properties Connector 4代原厂IPEX Cable TypeO.D.0.81mm Cable Length193mm Cable Colo rGray add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 y Operating Temp.-40 ~ +85 ̊C Storage Temp / Humidity 25±5 ̊C / <70% Antenna Performance TestAntenna Performance Te s t AgilentAgilent E5071B S11 ParameterParameter Test // WiFi1 AntennaAntenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Passive Test For WiFi1 Antenna(2.4G) FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 65.5 -1.8 3.7 2410 66.1 -1.8 3.8 2420 64.7 -1.9 3.7 2430 64.1 -1.9 3.8 2440 63.2 -2.0 3.7 2450 65.5 -1.8 3.8 2460 62.1 -2.1 3.7 2470 62.8 -2.0 3.8 2480 60.7 -2.2 3.9 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 2490 61.7 -2.1 4.1 2500 58.8 -2.3 4.0 Passive Test For WiFi1 Antenna(5.8G) FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5150 54.1 -2.7 2.1 5200 52.1 -2.8 1.9 5250 52 22821 5250 52.2 -2.8 2.1 5300 53.5 -2.7 2.3 5350 50.7 -3.0 1.9 5400 53.2 -2.7 1.9 5450 49.8 -3.0 1.5 5500 45.2 -3.5 1.5 5550 46.9 -3.3 1.7 5600 40.9 -3.9 1.2 5650 36.2 -4.4 1.3 5700 37.0 -4.3 1.8 5750 33 14814 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 5750 33.1 -4.8 1.4 5800 31.2 -5.1 1.3 5850 35.0 -4.6 1.8 Radiation Pattern For WiFi1 Antenna （ 2400MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi1 Antenna （ 2450MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi1 Antenna （ 2500MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi1 Antenna Phi 0° Phi 90° Theta 90° add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 eta 90 Radiation Pattern For WiFi1 Antenna （ 5150MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi1 Antenna （ 5500MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi1 Antenna （ 5850MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi1 Antenna Phi 0° Phi 90° Theta 90° add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 eta 90 DeviceDevice add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 WiFi1 Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 GNSS天线WiFi0天线 WiFi1天线 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Material safety data (MSDS) 1、 Item and manufacturer information page: 1 / 2 Item name: FPC antenna electroplated nickel and gold (flexible printed circuit) Other names: FPC nickel gold coating Recommended use and restricted use: communication products Name of manufacturer or supplier: Dongguan Xiaoge Electronic Technology Co., Ltd Address of manufacturer or supplier: 1 / 2 / F, Sanxing Road, Fenghuang Middle Road, Shajiao community, Humen Town, Dongguan City Emergency contact / Fax: 2、 Hazard identification data Hazard classification: other dangerous substances, acute toxic substances, grade 4 (swallowing, skin, inhalation) Label content: Symbols: other dangerous objects, exclamation marks Warning: warning Hazard warning message: harmful if swallowed, harmful if inhaled Hazard prevention measures: put the container in a well ventilated place; avoid contact with skin and eyes; in case of accide nt or discomfort, consult medical treatment immediately Other hazards:- 3、 Component identification data mixture Chinese and English Name: nickel CAS no.7440-02-0 percentage 98.95% Gold CAS no.7440-57-5 percentage 1% Brightener CAS no.6155-57-3 percentage 0.05% Synonymous Name: gold finger nickel gold layer Case No Composition of hazardous substances (percentage of components) 4、 First aid measures First aid methods for different exposure routes: Inhalation: - irritates respiratory tract Skin contact: wash the contact area with soap and water Eye contact: flush with plenty of water for more than 15 minutes and seek medical assistance Ingestion: drink plenty of water and seek medical assistance The most important symptom and harmful effect: irritant. Protection of first-aid personnel: wear class C protective equipment to implement first aid in safe area Tips for doctors: patients should be given oxygen when inhaled.When swallowing, consider gastric lavage. 5、 Fire fighting measures Suitable extinguishing agent: Carbon dioxide, chemical powder, water mist, alcohol foam. Special hazards that may be encountered during fire fighting: When heated to dry, the salt will decompose to produce carbon monoxide and carbon dioxide. Special fire fighting procedures: 1.Spray water mist to cool containers exposed to fire.2. Spray water to wash away the leakage to avoid exposure. Special protective equipment for fire fighters: If necessary,…

Text truncated - open the document above for the full version.

东莞市一佳电子通讯科技有限公司 Dongguan YiJia Electronics Communication Technology Co.,Ltd. 规格承认书 SPECIFICATION FOR APPROVAL 日期 Date 2023/06/21 编号 File No 23062101 版本 Revision 1.0 客户 CUSTOMER: 万利达 客户料号 CUSTOMER NO: SMB-P1006 品名 WIFI 0 Antenna L 151 0mm MHF 品名 PART NAME: WIFI 0 Antenna L=151.0mm MHF 供方料号 SUPPLIER NO: YJS01.005.064.301 送样日期 Date: 送样数量Q“TY: 客户确认CUSTOMER APPROVED BY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIER SIGNATURE APPROVALCHECKDESIGN add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 APPROVALCHECKDESIGN ChenGuoqiangXieLiChenXingyi YJ-RD-F04-A 承认书项目表 NO . 内容 （Contents） 页数 （Number of Page） 页码 （Page Code） 1 承认书封面（Spec Cover） 11 承认书封面（p） 2 承认书项目表（Spec Item ） 12 3 工程成品图（Drawing） 13 4 天线规格（Antenna Specification） 14 5 S参数测试（S Parameter ） 15 6 无源测试（Passive Test ） 26 ~ 7 7 方向图（Radiation Pattern ） 88 ~ 15 8 天线装配图（Antenna Profile） 316 ~ 18 9 材质证明（Mt ilC tifi t） 3919 579 材质证明（Material Certificate ） 3919 ~ 57 10 RoHS报告（RoHS Test Report ） **** 11N/AN/AN/A add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 12--- 13--- 天线规格 Antenna Specification Electrical Properties Frequency 2.4-2.5GHz 5155 85GHz5.15-5.85GHz Impedance50 Ohm Nominal V.S.W.R 2.0 [email protected] 2.5 [email protected] 47dBi@2425GH Gain 4.7 [email protected] 4.5 [email protected] RadiationOmni-directional PolarizationLinear Physical Properties Connector 4代原厂IPEX Cable TypeO.D.0.81mm Cable Length151mm Cable Colo rBlack add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Operating Temp.-40 ~ +85 ̊C Storage Temp / Humidity 25±5 ̊C / <70% Antenna Performance TestAntenna Performance Te s t AgilentAgilent E5071B S11 ParameterParameter Test // WiFi0 AntennaAntenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Passive Test For WiFi0 Antenna(2.4G) FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 60.5 -2.2 4.7 2410 61.2 -2.1 4.7 2420 61.1 -2.1 4.6 2430 62.2 -2.1 4.7 2440 62.2 -2.1 4.6 2450 63.5 -2.0 4.6 2460 61.2 -2.1 4.5 2470 61.5 -2.1 4.5 2480 59.0 -2.3 4.5 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 2490 59.0 -2.3 4.6 2500 55.2 -2.6 4.2 Passive Test For WiFi0 Antenna(5.8G) FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5150 57.8 -2.4 2.0 5200 59.2 -2.3 2.4 5250 63 72024 5250 63.7 -2.0 2.4 5300 64.4 -1.9 2.4 5350 64.4 -1.9 2.4 5400 68.1 -1.7 2.9 5450 66.2 -1.8 2.7 5500 59.8 -2.2 3.0 5550 65.9 -1.8 3.6 5600 70.2 -1.5 3.9 5650 65.6 -1.8 4.0 5700 63.4 -2.0 3.8 5750 69 81643 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 5750 69.8 -1.6 4.3 5800 72.3 -1.4 4.5 5850 65.2 -1.9 3.9 Radiation Pattern For WiFi0 Antenna （ 2400MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi0 Antenna （ 2450MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi0 Antenna （ 2500MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi0 Antenna Phi 0° Phi 90° Theta 90° add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 eta 90 Radiation Pattern For WiFi0 Antenna （ 5150MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi0 Antenna （ 5500MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi0 Antenna （ 5850MHz ） add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi0 Antenna Phi 0° Phi 90° Theta 90° add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 eta 90 DeviceDevice add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 WiFi0 Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 GNSS天线WiFi0天线 WiFi1天线 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Material safety data (MSDS) 1、 Item and manufacturer information page: 1 / 2 Item name: FPC antenna electroplated nickel and gold (flexible printed circuit) Other names: FPC nickel gold coating Recommended use and restricted use: communication products Name of manufacturer or supplier: Dongguan Xiaoge Electronic Technology Co., Ltd Address of manufacturer or supplier: 1 / 2 / F, Sanxing Road, Fenghuang Middle Road, Shajiao community, Humen Town, Dongguan City Emergency contact / Fax: 2、 Hazard identification data Hazard classification: other dangerous substances, acute toxic substances, grade 4 (swallowing, skin, inhalation) Label content: Symbols: other dangerous objects, exclamation marks Warning: warning Hazard warning message: harmful if swallowed, harmful if inhaled Hazard prevention measures: put the container in a well ventilated place; avoid contact with skin and eyes; in case of accide nt or discomfort, consult medical treatment immediately Other hazards:- 3、 Component identification data mixture Chinese and English Name: nickel CAS no.7440-02-0 percentage 98.95% Gold CAS no.7440-57-5 percentage 1% Brightener CAS no.6155-57-3 percentage 0.05% Synonymous Name: gold finger nickel gold layer Case No Composition of hazardous substances (percentage of components) 4、 First aid measures First aid methods for different exposure routes: Inhalation: - irritates respiratory tract Skin contact: wash the contact area with soap and water Eye contact: flush with plenty of water for more than 15 minutes and seek medical assistance Ingestion: drink plenty of water and seek medical assistance The most important symptom and harmful effect: irritant. Protection of first-aid personnel: wear class C protective equipment to implement first aid in safe area Tips for doctors: patients should be given oxygen when inhaled.When swallowing, consider gastric lavage. 5、 Fire fighting measures Suitable extinguishing agent: Carbon dioxide, chemical powder, water mist, alcohol foam. Special hazards that may be encountered during fire fighting: When heated to dry, the salt will decompose to produce carbon monoxide and carbon dioxide. Special fire fighting procedures: 1.Spray water mist to cool containers exposed to fire.2. Spray water to wash away the leakage to avoid exposure. Special protective equipment for fire fighters: If necessary, …

Text truncated - open the document above for the full version.

1.00 0.50 0.10 0.05 0.050.02 0.10 0.20 0.10 0.50 0.20 2023/11/30 01DC1213-03BLABEL RATING MODEL NO.DESCRIPTIONDWG NO. CHKDCHKDCHKD DGNR G.DWN SRL NO. ART NO. ODS Corporation N.Iwamoto DC1213-03B_ LABEL RATING %TA2C-CS8 K.Sano TA2C-CS8 A.Ichikawa T.Oike W46×H26mm 3-R:1.2mm C:3mm When printing, add color outside the cutting line. Barcord : Size=W35 x H3 mm, Format=Code128 “S/N” : Font=Arial Regular, Size=6pt, LetterSpace=100, Barcode-head alignment “No.” : Font=Arial Regular, Size=6pt, LetterSpace=300, Barcode-end alignment Barcode Area ML123456789012 ML123456789012 S/N        
                 

TABLET PC with two alternative CPU which is identical with each other except for model number.

Page: 1 of 42 TEST REPORT For SAR Report No. ...................................... : CHTEW23120015 Report verification: Project No. ...................................... : SHT2311058901EW FCC ID ............................................. : 2BDQY-TA2C-CS8 Applicant’s name ........................... : ODS Corporation Address ............................................. : 2-5 Kanda suda cho, Chiyoda ku, Tokyo 101-0041, Japan Test item description .................... : TABLET PC Trade Mark ....................................... : - Model/Type reference ....................... : TA2C-CS8 Listed Model(s) ................................. : - Standard ......................................... : FCC 47 CFR Part2.1093 IEEE Std C95.1: 1999 Edition IEEE Std 1528: 2013 Date of receipt of test sample..........: Nov. 21, 2023 Date of testing..............................: Dec. 06, 2023- Dec. 20, 2023 Date of issue...............................: Dec. 28, 2023 Result .................. ........................: PASS Compiled by ( position+printedname+signature) ... : File administrators:Xiaodong Zhao Supervised by ( position+printedname+signature) ... : Test Engineer: Xiaodong Zhao Approved by ( position+printedname+signature) ... : Manager: Xu Yang Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : Building 7, Baiwang Idea Factory, No.1051, Songbai Road, Yangguang Community, Xili Subdistrict, Nanshan District, Shenzhen, Guangdong, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely correspond to the test sample. Report No.: CHTEW23120015 Page: 2 of 42 Issued: 2023-12-28 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) Contents 1. Statement of Compliance 3 2. Test Standards and Report version 4 2.1. Test Standards 4 2.2. Report version 4 3. Summary 5 3.1. Client Information 5 3.2. Product Description 5 3.3. RF Specification Description 5 3.4. Testing Laboratory Information 6 3.5. Environmental conditions 6 4. Equipments Used during the Test 7 5. Measurement Uncertainty 8 6. SAR Measurement System Configuration 9 6.1. SAR Measurement Set-up 9 6.2. DASY5 E-field Probe System 10 6.3. Phantoms 11 6.4. Device Holder 11 7. SAR Test Procedure 12 7.1. Scanning Procedure 12 7.2. Data Storage and Evaluation 14 8. Position of the wireless device in relation to the phantom 16 8.1. Body Position 16 9. Dielectric Property Measurements & System Check 17 9.1. Tissue Dielectric Parameters 17 9.2. System Check 18 10. SAR Exposure Limits 24 11. Conducted Power Measurement Results and Tune-up 25 12. RF Exposure Conditions (Test Configurations) 26 12.1. Antenna Location 26 12.2. Standalone SAR test exclusion considerations 27 12.3. Required Test Configurations 28 13. Measured and Reported SAR Results 29 14. SAR Measurement Variability 31 15. Simultaneous Transmission analysis 32 15.1. Simultaneous Transmission 32 16. Test Setup Photos 33 17. External and Internal Photos of the EUT 35 Report No.: CHTEW23120015 Page: 3 of 42 Issued: 2023-12-28 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) 1. Statement of Compliance Maximum Reported SAR (W/kg @1g) Type Test setting WIFI 2.4G WIFI 5G BT Simultaneous TX Body Dist.= 0mm 1.258 1.323 0.162 1.485 Note: 1. This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6 W/kg@1g) specified in FCC 47 CFR part 2 (2.1093) and IEEE Std C95.1, 2. This device had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and FCC KDB publications. Report No.: CHTEW23120015 Page: 4 of 42 Issued: 2023-12-28 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) 2. Test Standards and Report version 2.1. Test Standards The tests were performed according to following standards: FCC 47 Part 2.1093: Radiofrequency radiation exposure evaluation: portable devices. IEEE Std C95.1, 1999 Edition: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE Std 1528™-2013: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. FCC published RF exposure KDB procedures: 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04: SAR Measurement Requirements for 100 MHz to 6 GHz 865664 D02 RF Exposure Reporting v01r02: RF Exposure Compliance Reporting and Documentation Considerations 447498 D04 Interim General RF Exposure Guidance v01: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies 248227 D01 802 11 Wi-Fi SAR v02r02: SAR Measurement Proceduresfor802.11 a/b/g Transmitters 616217 D04 SAR for laptop and tablets v01r02: describes the SAR evaluation requirements for laptop, notebook, netbook and tablet computers TCB workshop April, 2019; Page 19, Tissue Simulating Liquids (TSL) 2.2. Report version Revision No. Date of issue Description N/A 2023-12-28 Original Report No.: CHTEW23120015 Page: 5 of 42 Issued: 2023-12-28 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V05 (2023-03) 3. Summary 3.1. Client Information Applicant: ODS Corporation Address: 2-5 Kanda suda cho, Chiyoda ku, Tokyo 101-0041, Japan Manufacturer: ODS Corporation Address: 2-5 Kanda su…

Text truncated - open the document above for the full version.

Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 12/20/2023 WIFI 5G U-NII-3 MIMO Body Communication System: UID 0, Generic WIFI (0); Frequency: 5795 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5795 MHz; σ = 5.285 S/m; ε r = 36.237; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(5.14, 5.14, 5.14) @ 5795 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Rear 0mm/CH159/Area Scan (191x181x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 2.19 W/kg Rear 0mm/CH159/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 2.192 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 4.23 W/kg SAR(1 g) = 0.854 W/kg; SAR(10 g) = 0.201 W/kg Maximum value of SAR (measured) = 2.27 W/kg Rear 0mm/CH159/Zoom Scan (8x8x7)/Cube 1: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 2.192 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 2.38 W/kg SAR(1 g) = 0.696 W/kg; SAR(10 g) = 0.176 W/kg Maximum value of SAR (measured) = 1.74 W/kg 0 dB = 1.74 W/kg = 1.44 dBW/kg Appendix D: SAR Test Data Plots Plot No.5 Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR LabDate: 12/6/2023 BT ANT1 Body Communication System: UID 0, Generic BT (0); Frequency: 2441 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2441 MHz; σ = 1.803 S/m; ε r = 40.148; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.7°C;Liquid Temperature:22.2°C DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(8.01, 8.01, 8.01) @ 2441 MHz; Calibrated: 4/17/2023 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/27/2023 lPhantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Rear 0mm/CH39/Area Scan (61x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (interpolated) = 0.211 W/kg Rear 0mm/CH39/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.674 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.332 W/kg SAR(1 g) = 0.119 W/kg; SAR(10 g) = 0.050 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.237 W/kg 0 dB = 0.237 W/kg = -6.25 dBW/kg Appendix D: SAR Test Data Plots Plot No.6 Appendix E: DAE and Probe Calibration Certificate 1 of 12 1. DAE4 Calibration Certificate Appendix E: DAE and Probe Calibration Certificate 2 of 12 Appendix E: DAE and Probe Calibration Certificate 3 of 12 Appendix E: DAE and Probe Calibration Certificate 4 of 12 2. Probe Calibration Certificate Appendix E: DAE and Probe Calibration Certificate 5 of 12 Appendix E: DAE and Probe Calibration Certificate 6 of 12 Appendix E: DAE and Probe Calibration Certificate 7 of 12 Appendix E: DAE and Probe Calibration Certificate 8 of 12 Appendix E: DAE and Probe Calibration Certificate 9 of 12 Appendix E: DAE and Probe Calibration Certificate 10 of 12 Appendix E: DAE and Probe Calibration Certificate 11 of 12 Appendix E: DAE and Probe Calibration Certificate 12 of 12 Appendix F: Dipole Calibration Certificate 1 of 16 1.1. D2450V2 Dipole Calibration Certificate Appendix F: Dipole Calibration Certificate 2 of 16 Appendix F: Dipole Calibration Certificate 3 of 16 Appendix F: Dipole Calibration Certificate 4 of 16 Appendix F: Dipole Calibration Certificate 5 of 16 Appendix F: Dipole Calibration Certificate 6 of 16 Appendix F: Dipole Calibration Certificate 7 of 16 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Head-2450 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2021-01-25 -27.4 53.9 2.04 2022-01-17 -27.9 1.82 53.5 0.4 2.34 0.3 2023-01-15 -27.3 -0.36 53.7 0.2 2.16 0.12 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix F: Dipole Calibration Certificate 8 of 16 1.2. D5GHzV2 Dipole Calibration Certificate Appendix F: Dipole Calibration Certificate 9 of 16 Appendix F: Dipole Calibration Certificate 10 of 16 Appendix F: Dipole Calibration Certificate 11 of 16 Appendix F: Dipole Calibration Certificate 12 of 16 Appendix F: Dipole Calibration Certificate 13 of 16 Appendix F: Dipole Calibration Certificate 14 of 16 Appendix F: Dipole Calibrati…

Text truncated - open the document above for the full version.