2BDSK-LYNX-SElectric unicycle

Lynx-S FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Guangzhou Coyote Intelligent Equipment Co., Ltd. Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2026/01/15 U.S. Agent Designation Guangzhou Coyote Intelligent Equipment Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BDSK-LYNX-S): Name and company of U.S. agent: GLOCERTS TECHNOLOGY INC Physical U.S. address of agent: 19784 SUNKISSED RIDGE DR RIVERSIDE, CA 92507 United States FRN of U.S. agent: 0036339737 Email address of U.S. agent: [email protected] GLOCERTS TECHNOLOGY INC acknowledges their obligation to accept service of process on behalf of Guangzhou Coyote Intelligent Equipment Co., Ltd. Guangzhou Coyote Intelligent Equipment Co., Ltd. with the FRN [0034537894] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. An expiration date for this letter does not exist. Sincerely, Signature Weiwei Lin Manager Guangzhou Coyote Intelligent Equipment Co., Ltd. Signature Huiying Fan Director GLOCERTS TECHNOLOGY INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

FCC ID:2BDSK-LYNX-S External Photos of the EUT FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S

Label and Location Size: L: 4.0cm*W: 3.0cm Label and Location FCC ID : 2BDSK-LYNX-S

FCC ID:2BDSK-LYNX-S Internal Photos of the EUT FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S BT ANT FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S FCC ID:2BDSK-LYNX-S

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure evaluation Report Reference No. ..................... : FCC ID. ............................................ : CTA26010600602 2BDSK-LYNX-S Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue ..................................... : Jan. 14, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Guangzhou Coyote Intelligent Equipment Co., Ltd. Address ............................................ : Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Standard ........................................... : 47CFR §1.1310 47CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Electric unicycle Trade Mark ....................................... : Leaperkim Manufacturer .................................... : Guangzhou Coyote Intelligent Equipment Co., Ltd. Model/Type reference ...................... : Lynx-S Listed Models ................................... : N/A Rating ............................................... : DC 129.6V From battery and DC 151.2V From external circuit Result ............................................... : PASS Report No.: CTA26010600602 Page 2 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Electric unicycle Model /Type : Lynx-S Listed Models : N/A Applicant : Guangzhou Coyote Intelligent Equipment Co., Ltd. Address : Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Manufacturer : Guangzhou Coyote Intelligent Equipment Co., Ltd. Address : Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26010600602 Page 3 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ............................................................................................................ 4 2 SUMMARY .......................................................................................................................... 5 2.1 General Remarks ..................................................................................................... 5 2.2 Product Description ................................................................................................. 5 2.3 Special Accessories ................................................................................................. 5 2.4 Modifications ............................................................................................................ 5 3 TEST ENVIRONMENT ....................................................................................................... 6 3.1 Address of the test laboratory .................................................................................. 6 3.2 Test Facility .............................................................................................................. 6 3.3 Statement of the measurement uncertainty ............................................................. 6 4 Test limit .............................................................................................................................. 7 4.1 Requirement ............................................................................................................ 7 4.2 Conducted Power Results ....................................................................................... 7 4.3 Manufacturing tolerance .......................................................................................... 7 4.4 Evaluation Result ..................................................................................................... 8 4.5 Simultaneous Transmission for SAR Exclusion ...................................................... 8 5 Conclusion ........................................................................................................................... 8 Report No.: CTA26010600602 Page 4 of 8 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] We…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type PCB antenna Model Lynx-S Frequency range 2400-2500MHz Manufacturer Guangzhou Coyote Intelligent Equipment Co., Ltd. Address Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village,Baiyun Guangzhou, China ANT Peak Gain 1.92 dBi 2. Antenna Photo: Length :11.88mm Width:3.74mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ...................: FCC ID. ......................................... : CTA26010600601 2BDSK-LYNX-S Compiled by ( position+printed name+signature) : File administrators Zoey Cao Supervised by ( position+printed name+signature) : Project Engineer Ace Chai Approved by ( position+printed name+signature) : RF Manager Eric Wang Date of issue ...................................: Jan. 14, 2026 Testing Laboratory Name .............: Shenzhen CTA Testing Technology Co., Ltd. Address ..........................................: Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name...........................: Guangzhou Coyote Intelligent Equipment Co., Ltd. Address ...........................................: Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Test specification ......................... : Standard ..........................................: FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description ................ : Electric unicycle Trade Mark ......................................: Leaperkim Manufacturer ...................................: Guangzhou Coyote Intelligent Equipment Co., Ltd. Model/Type reference .....................: Lynx-S Listed Models ..................................: N/A Modulation ......................................: GFSK Frequency .......................................: From 2402MHz to 2480MHz Ratings ............................................: DC 129.6V From battery and DC 151.2V From external circuit Result ..............................................: PASS Report No.: CTA26010600601 Page 2 of 46 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Electric unicycle Model /Type : Lynx-S Listed Models : N/A Applicant : Guangzhou Coyote Intelligent Equipment Co., Ltd. Address : Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Manufacturer : Guangzhou Coyote Intelligent Equipment Co., Ltd. Address : Part 1 of 3rd floor, No. 45-2, Northern Industrial Road, Xinlou village, Baiyun Guangzhou, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26010600601 Page 3 of 46 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ...................................................................................................................................... 4 2 SUMMARY .................................................................................................................................................... 5 2.1 General Remarks .............................................................................................................................. 5 2.2 Product Description* .......................................................................................................................... 5 2.3 Equipment Under Test ....................................................................................................................... 5 2.4 Short description of the Equipment under Test (EUT) ...................................................................... 5 2.5 EUT configuration .............................................................................................................................. 5 2.6 EUT operation mode ......................................................................................................................... 5 2.7 Block Diagram of Test Setup ............................................................................................................. 6 2.8 Related Submittal(s) / Grant (s) ......................................................................................................... 6 2.9 Modifications ...................................................................................................................................... 6 3 TEST ENVIRONMENT ................................................................................................................................. 7 3.1 Address of the test laboratory ........................................................................................................... 7 3.2 Test Facility........................................................................................................................................ 7 3.3 Environmental conditions .................................................................................................................. 7 3.4 Summary of measurement results …

Text truncated - open the document above for the full version.

1 FCC Appendix RF Test Data for BLE FCC ID : 2BDSK-LYNX-S Company : Guangzhou Coyote Intelligent Equipment Co., Ltd. EUT : Electric unicycle Model Number : Lynx-S Report No. : CTA26010600601 Reviewed By : Eric Wang 2 Appendix A: DTS Bandwidth Test Result TestMode Antenna Freq(MHz) DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.632 2401.696 2402.328 0.5 PASS 2440 0.640 2439.700 2440.340 0.5 PASS 2480 0.664 2479.680 2480.344 0.5 PASS 3 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 4 5 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Freq(MHz) OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0024 2401.5203 2402.5227 --- --- 2440 1.0132 2439.5169 2440.5301 --- --- 2480 1.0142 2479.5161 2480.5303 --- --- 6 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 7 8 Appendix C: Maximum conducted output power Test Result Peak TestMode Antenna Freq(MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict BLE_1M Ant1 2402 -3.09 ≤30 PASS 2440 -3.64 ≤30 PASS 2480 -3.97 ≤30 PASS 9 Appendix D: Maximum power spectral density Test Result TestMode Antenna Freq(MHz) Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -18.96 ≤8.00 PASS 2440 -19.56 ≤8.00 PASS 2480 -19.82 ≤8.00 PASS 10 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 11 12 Appendix E: Band edge measurements Test Result TestMod e Antenn a ChNam e Freq(MHz ) RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1M Ant1 Low 2402 -3.25 -53.9 ≤-23.25 PASS High 2480 -4.61 -56.7 ≤-24.61 PASS 13 Test Graphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 14 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Freq(MHz) FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 Reference -3.81 -3.81 --- PASS 30~1000 -3.81 -67.92 ≤-23.81 PASS 1000~26500 -3.81 -46.93 ≤-23.81 PASS 2440 Reference -5.24 -5.24 --- PASS 30~1000 -5.24 -67.45 ≤-25.24 PASS 1000~26500 -5.24 -48.39 ≤-25.24 PASS 2480 Reference -6.09 -6.09 --- PASS 30~1000 -6.09 -67.68 ≤-26.09 PASS 1000~26500 -6.09 -40.02 ≤-26.09 PASS 15 Test Graphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 16 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 17 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference BLE_1M_Ant1_2480_30~1000 18 BLE_1M_Ant1_2480_1000~26500 19 Appendix G: Duty Cycle Test Result TestMode Antenna Freq(MHz) ON Time [ms] Period [ms] X DC [%] xFactor Limit Verdict BLE_1M Ant1 2402 0.41 0.62 0.6613 66.13 1.80 --- --- 2440 0.41 0.62 0.6613 66.13 1.80 --- --- 2480 0.41 0.62 0.6613 66.13 1.80 --- --- 20 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 21 22 Appendix H: Emissions in Restricted Bands Test Result TestMod e Antenn a ChNam e Freq(MH z) Detector Freq [MHz] Result [dBm] Gain [dB] DC Factor [dB] Result [dBuV/m ] Limit [dBuV/m] Verdict BLE_1M Ant1 Low 2402 AV 2310.000 -59.58 2.00 1.80 39.42 ≤54 PASS AV 2384.945 -58.4 2.00 1.80 40.60 ≤54 PASS AV 2390.000 -58.94 2.00 1.80 40.06 ≤54 PASS Peak 2310.000 -52.48 2.00 0.00 44.72 ≤74 PASS Peak 2344.415 -48.38 2.00 0.00 48.82 ≤74 PASS Peak 2390.000 -50.76 2.00 0.00 46.44 ≤74 PASS High 2480 AV 2483.500 -58.88 2.00 1.80 40.12 ≤54 PASS AV 2485.360 -57.92 2.00 1.80 41.08 ≤54 PASS AV 2500.000 -59.14 2.00 1.80 39.86 ≤54 PASS Peak 2483.500 -50.68 2.00 0.00 46.52 ≤74 PASS Peak 2485.120 -46.93 2.00 0.00 50.27 ≤74 PASS Peak 2500.000 -50.77 2.00 0.00 46.43 ≤74 PASS Note：The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. 23 Test Graphs BLE_1M_Ant1_Low_2402_AV BLE_1M_Ant1_Low_2402_Peak BLE_1M_Ant1_High_2480_AV 24 BLE_1M_Ant1_High_2480_Peak

FCC ID:2BDSK-LYNX-S Test Setup Photos of the EUT FCC ID:2BDSK-LYNX-S