2BDSW-LOVETAGLovetag

LOVE Ta g User Manual Love Tag Index 01 02 03 04 05 06 07 08 Getting Started Add Your LoveTag Locate Your LoveTag Notifications When Your LoveTag Is Lost Resetting LoveTag Extras The Fine Print User Manual 2-3 LoveTag 01 01.1 01.2 Getting Started Check For Updates: To use the Apple® Find My® app to locate this item, the latest version of iOS®, iPadOS®, or macOS® is recommended. The Find Items app on Apple Watch® Power On / Off: Remove the cover and remove the battery. Insert the battery, it should a ringring chime indicating it is powered on. To power off,open the case and remove the battery. requires the latest version of watchOS®. User Manual 4 Love Tag User Manual 02 02.1 02.2 Add Your LoveTag Start The App Open Find My app on your supported iPhone®. Connect Your LoveTag Remove the cover to power on your LoveTag. Tap+, then “Add Other ltem” . Once your LoveTag is located, tap "connect" Enter a name and choose an emoji for your LoveTag and tap "Continue''. Find My will ask for confirmation to add your LoveTag to your Apple ID Tap "Agree" Tap "Finish" and your LoveTag will be set up and ready to be used. 5 LoveTag 03 03.1 03.2 Locate Your LoveTag Find LoveTag When It's Nearby: Open Find My app and select the "Items" tab or open the Find ltems app on your Apple Watch. Tap on your LoveTag from the list. Tap "Play Sound" to make your LoveTag beep. Tap "Stop Sound" to stop the beeps once you find. Find LoveTag's Location: Open Find My app and select the "Items" tab or open the Find ltems app on your Apple Watch. Tap on your LoveTag from the list. Your LoveTag's location will appear on the Map with a time stamp of when the iterm was located. To navigate to the LoveTag's location, tap “ Directions" to open Apple Maps . User Manual 6 LoveTag User Manual 04 04.1 04.2 Notifications Enabling "Notify When Left Behind": Open Find My app and select the "Items" tab or open the Find ltems app on your Apple Watch. Tap on your LoveTag from the list. Under "Notifications" enable the "Notify When Left Behind" toggle. You will receive a notification when you leave your LoveTag behind and it's no longer in range of your device. Enabling "Notify When Found": Under "Notifications", enable the "Notify When Found" toggle. When your LoveTag is seen by another Find My network device, you will receive a notification of its location. Note :" Notify When Found" can only be activated when your LoveTag is out of range. 7 LoveTag 05 05.1 When Your LoveTag ls Lost Enabling "Lost Mode": Open Find My app and select the "Items" tab or open the Find ltems app on your Apple Watch. Tap on your LoveTag from the list. Under "Lost Mode" tap "Enable” A screen detailing Lost Mode will pop up, tap "Continue" Enter your phone number or email address and tap "Next". You may enter a message that will be shared with the person that finds your item. Tap "Activate" to enable "Lost Mode” Note: When "Lost Mode" is enabled, "Notify When Found" is automatically enabled. Note: When" Lost Mode'' is enabled, your LoveTag is locked and cannot be paired to a new device. User Manual 8 LoveTag User Manual 06 06.1 Resetting 06.2 LoveTag Remove The LoveTag From Find My App: Open Find My app and select the "Items" tab. Tap on your LoveTag from the list. please ensure "Lost Mode" is disabled. Scroll to the bottom of the screen and tap "Remove ltem". A summary will open, tap "Remove" to confirm. Factory Reset Your LoveTag: After successfully removing the LoveTag from Find My app, Open the case and remove the battery.Insert the battery and hear a sound. This sound indicates that the battery is connected. When you hear a sound, repeat the operation for four more times: remove the battery, Insert it. You should hear a sound every time you Insert the battery; A total of five sounds will be heard during the whole process. The fifth tone is different from the first four, which indicates that the accessory is now ready for pairing. The LoveTag is now reset and ready to be paired to a new Apple ID. 9 LoveTag 07 07.1 07.2 Extras Unwanted tracking: If any Find My network accessory separated from its owner is seen moving with you over time, you'll be Replace The Battery: lide the opening slider on the back of your LoveTag to carefully open the shells. Replace the battery with a new CR1632 battery placing it positive side up (text facing up). Carefully close the LoveTag by aligning the top hole on both sides. notified in one of two ways: 1. lf you have an iPhone, iPad®, Find My will send a notification to your Apple device.This feature is available on iOS or iPadOS 14.5 or later. 2. lf you don't have an ios device or a smartphone, a Find My network accessory that isn't with its owner for a period of time will emit a sound when it's moved. These features were created specifically to discourage people from trying to track you without your knowledge. User Manual 10 LoveTag User Manual 08The Fine Print This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user's authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure conditions without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential install…

Text truncated - open the document above for the full version.

-Guangzhou Zhouxing Electronic Technology Co., Ltd - Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7 435 Oakland Mills Road Columbia, MD 21046 11/24/2023 U.S. �nation Guangzhou Zhouxing E lectronic Technology Co., Ltd acknowledges thei「 consent fo「 the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2BDSW-LOVETAG1): Name and company of U.S. agent: Linkwld LLC Physical U.S. address of agent: 1942 Broadway St. STE 314C, Boulder, CO, 80302, US FRN of U.S. agent: 0033625682 Email address of U.S. agent: [email protected] Linkwld LLC acknowledges their obligation to accept service of process on behalf of Guangzhou Zhouxing Electronic Technology Co., Ltd Guangzhou Zhouxing Electronic Technology Co., Ltd with the FRN (0034542241] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either t he grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any C ommission-related administrative or 丿udicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under§ 2.911 (d)(7). Since「ely, Signature [Name]Chengfu Wu [Title]CEO [Company]Guangzhou Zhouxing Elect「onicTechnology Co., Ltd 「 {}2 . } ，已百一言弓梦 己 － l 爷 ( lllll 孚 飞十 多 丛 Signaiu「e [Name of U.S. agent] Timothy Zhu [Title of U.S. agent]Manager [Company of U.S. agent] Linkwld LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DOI An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB

C5266091_X24_Ed.2 1/1 Guangzhou Zhouxing Electronic Technology Co., Ltd “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Guangzhou Zhouxing Electronic Technology Co., Ltd Grantee code: 2BDSW FCC ID: 2BDSW-LOVETAG Contact Name: ChengFu Wu Address: B411, Building 1, Helenberg Creative Park, Yuxi Road, Panyu District, Guangzhou, China Telephone No: +86 18602076642 Fax No: +86 22091096 Email: [email protected] FRN: 0034542241 i. [Guangzhou Zhouxing Electronic Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Guangzhou Zhouxing Electronic Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Guangzhou Zhouxing Electronic Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2023/12/15 Applicant’s Name: ChengFu Wu Title: CEO Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Guangzhou Zhouxing Electronic Technology Co., Ltd Letter of Authorization Company: Guangzhou Zhouxing Electronic Technology Co., Ltd Address: B411, Building 1, Helenberg Creative Park, Yuxi Road, Panyu District, Guangzhou, China Product Name: Lovetag Model Number: LOVETAG FCC Identifier: 2BDSW-LOVETAG We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: ChengFu Wu Date: 2023.12.15 Title: CEO Signature of applicant:

C5266091_X10_Ed.2 1/1 Guangzhou Zhouxing Electronic Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023.12.15 Subject: Request for Confidentiality FCC ID: 2BDSW-LOVETAG To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: ChengFu Wu Title: CEO

ProjectNo.:18220WC302500Page 1 of 3 AppendixII--ExternalPhotograph ProjectNo.:18220WC302500Page 2 of 3 ProjectNo.:18220WC302500Page 3 of 3

LabelLocation: lovetag FCC:2BDSW-LOVETAG

ProjectNo.:18220WC302500Page 1 of 4 AppendixIII--InternalPhotograph ProjectNo.:18220WC302500Page 2 of 4 ProjectNo.:18220WC302500Page 3 of 4 ANT ProjectNo.:18220WC302500Page 4 of 4

RFEXPOSUREEVALUATION FCCID:2BDSW-LOVETAG AccordingtoKDB447498D01MobileandPortableDevicesRFExposure ProceduresandEquipmentAuthorizationPoliciesv06. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiationas specifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnotrequired, portabletransmitterswithoutputpowergreaterthantheapplicablelowthresholdrequire SARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 24024.164.16 ±1 5.160 5 1.017 3 GFSK 24404.654.65 ±15.650 5 1.148 3 24804.144.14 ±15.14051.0293 24024.394.39 ±1 5.390 5 1.072 3 24404.674.67 ±15.670 5 1.153 3 24804.084.08 ±15.08051.0153 Result:NoStandaloneSARtestisrequired.

Shenzhen Kuruijie Communication Technologies Co.,Ltd Customer: Project:lovetag Antenna Test Report SHENZHEN KURUIJIE RF Engineer: 安增侠 Testing Date:2023.11.27 Shenzhen Kuruijie Communication Technologies Co.,Ltd Index: 1. Testing Item & Equipments 2. Matching Circuits 3. 4. Test Data 5. GPS / WIFI / BT Test Shenzhen Kuruijie Communication Technologies Co.,Ltd 1: Anechoic Chamber 7x4x3 m (3D) 2: Rohde & Schwarz CMW500 3: AGILENT 8960 5515C 4: Network Analyzer-AGILENT ENA5071B 1. The Equipment of Active Test Shenzhen Kuruijie Communication Technologies Co.,Ltd 2. Matching Circuits Shenzhen Kuruijie Communication Technologies Co.,Ltd 3. Shenzhen Kuruijie Communication Technologies Co.,Ltd 4 天线效率和增益 Passive Test For wifi2.4 FreqEffiGain (MHz)(%)(dBi) 240021.7-0.12 241023.03-0.1 242023.79-0.02 243024.83-0.01 244025.40.22 245027.680.33 246028.580.41 247027.090.22 248026.720.26 249026.770.21 250025.370.12 Shenzhen Kuruijie Communication Technologies Co.,Ltd 4.8. 苹果图

ReportNo.:18220WC30250001FCCID:2BDSW-LOVETAGPage1of31 FCCTestReport Applicant: GuangzhouZhouxingElectronicTechnology Co.,Ltd Address: B411,Building1,HelenbergCreativePark,Yuxi Road,PanyuDistrict,Guangzhou,China ProductName:lovetag ReportDate:Dec.14,2023 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC30250001FCCID:2BDSW-LOVETAGPage2of31 Contents 1.GeneralInformation.................................................................................................................................6 1.1.ClientInformation...........................................................................................................................6 1.2.DescriptionofDevice(EUT)..........................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest..........................................................................................7 1.4.Operationchannellist....................................................................................................................8 1.5.DescriptionofTestModes.............................................................................................................8 1.6.MeasurementUncertainty.............................................................................................................8 1.7.TestSummary................................................................................................................................9 1.8.DescriptionofTestFacility...........................................................................................................10 1.9.Disclaimer....................................................................................................................................10 1.10.TestEquipmentList....................................................................................................................11 2.Antennarequirement..............................................................................................................................13 2.1.Conclusion...................................................................................................................................13 3.ConductedEmissionatACpowerline..................................................................................................14 3.1.EUTOperation.............................................................................................................................14 3.2.TestSetup....................................................................................................................................14 3.3.TestData......................................................................................................................................14 4.OccupiedBandwidth..............................................................................................................................15 4.1.EUTOperation.............................................................................................................................15 4.2.TestSetup....................................................................................................................................15 4.3.TestData......................................................................................................................................15 5.MaximumConductedOutputPower......................................................................................................16 5.1.EUTOperation.............................................................................................................................16 5.2.TestSetup....................................................................................................................................16 5.3.TestData......................................................................................................................................16 6.PowerSpectralDensity..........................................................................................................................17 6.1.EUTOperation.............................................................................................................................17 6.2.TestSetup....................................................................................................................................17 6.3.TestData......................................................................................................................................17 7.Emissionsinnon-restrictedfrequencybands.......................................................................................18 7.1.EUTOperation.............................................................................................................................18 7.2.TestSetup....................................................................................................................................18 7.3.TestData......................................................................................................................................18 8.Bandedgeemissions(Radiated)..........................................................................................................19 8.1.EUTOperation.............................................................................................................................19 8.2.TestSetup....................................................................................................................................20 8.3.TestData......................................................................................................................................21 9.Emissionsinfrequencybands(below1GHz).......................................................................................22 9.1.EUTOperation.............................................................................................................................22 9.2.TestSetup..............................…

Text truncated - open the document above for the full version.

Page1of33 AppendixTestData ReportNo.:18220WC30250001TestSampleNo.:1-2-2 StartTestDate: 2023.12.01 FinishTestDate:2023.12.13 TestEngineer:Auditor: Temperature:25.6 °C RelativeHumidity:43% Pressure:101kPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24020.6402401.6442402.2840.5PASS 24400.6482439.6402440.2880.5PASS 24800.6802479.6002480.2800.5PASS BLE_2MAnt1 24021.0762401.4442402.5200.5PASS 24401.0802439.4362440.5160.5PASS 24801.0922479.4242480.5160.5PASS Page2of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page3of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page4of33 BLE_2M_Ant1_2480 Page5of33 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] BLE_1MAnt1 24021.07892401.45322402.5321 24401.08462439.44272440.5273 24801.07692479.43852480.5154 BLE_2MAnt1 24022.09482400.95112403.0459 24402.08042438.94852441.0289 24802.09692478.94112481.0380 Page6of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page7of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page8of33 BLE_2M_Ant1_2480 Page9of33 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt1 24024.16≤30PASS 24404.65≤30PASS 24804.14≤30PASS BLE_2MAnt1 24024.39≤30PASS 24404.67≤30PASS 24804.08≤30PASS Page10of33 TestGraphsPeak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page11of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page12of33 BLE_2M_Ant1_2480 Page13of33 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-4.97≤8.00PASS 2440-4.87≤8.00PASS 2480-4.06≤8.00PASS BLE_2MAnt1 2402-8.59≤8.00PASS 2440-8.44≤8.00PASS 2480-7.94≤8.00PASS Page14of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page15of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page16of33 BLE_2M_Ant1_2480 Page17of33 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 Low24020.35-50.99≤-19.65PASS High24801.36-58.11≤-18.64PASS BLE_2MAnt1 Low2402-2.29-32.12≤-22.29PASS High24800.78-57.89≤-19.22PASS Page18of33 TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 BLE_2M_Ant1_Low_2402 Page19of33 BLE_2M_Ant1_High_2480 Page20of33 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 2402 Reference1.011.01---PASS 30~10001.01-69.37≤-18.99PASS 1000~2650 0 1.01-54.07≤-18.99PASS 2440 Reference1.141.14---PASS 30~10001.14-69.3≤-18.86PASS 1000~2650 0 1.14-53.01≤-18.86PASS 2480 Reference1.941.94---PASS 30~10001.94-68.84≤-18.06PASS 1000~2650 0 1.94-53.6≤-18.06PASS BLE_2MAnt1 2402 Reference0.110.11---PASS 30~10000.11-69.57≤-19.89PASS 1000~2650 0 0.11-54.06≤-19.89PASS 2440 Reference0.290.29---PASS 30~10000.29-68.25≤-19.71PASS 1000~2650 0 0.29-53.67≤-19.71PASS 2480 Reference0.790.79---PASS 30~10000.79-69.22≤-19.21PASS 1000~2650 0 0.79-55.07≤-19.21PASS Page21of33 TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Page22of33 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 Page23of33 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference Page24of33 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Page25of33 BLE_2M_Ant1_2402_0~Reference BLE_2M_Ant1_2402_30~1000 Page26of33 BLE_2M_Ant1_2402_1000~26500 BLE_2M_Ant1_2440_0~Reference Page27of33 BLE_2M_Ant1_2440_30~1000 BLE_2M_Ant1_2440_1000~26500 Page28of33 BLE_2M_Ant1_2480_0~Reference BLE_2M_Ant1_2480_30~1000 Page29of33 BLE_2M_Ant1_2480_1000~26500 Page30of33 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt1 24020.380.6360.322.20 24400.380.6360.322.20 24800.380.6360.322.20 BLE_2MAnt1 24020.190.6330.165.21 24400.190.6230.655.14 24800.200.6331.754.98 Page31of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page32of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page33of33 BLE_2M_Ant1_2480 ---End---

ProjectNo.:18220WC302500Page 1 of 1 AppendixI--TestSetupPhotograph_RF Emissionsinfrequencybands(below1GHz) Emissionsinfrequencybands(above1GHz)