2BDUK-MODEL6Tecdesk Model 6

2 3 4 Standard SIM Card Slot 5 6 7 8 9 10 11 12 13 14 Hearing Protection Adjust the volume to a moderate level. Continuous exposure to high volume may impair your hearing. Environmental Recycling 1. Never dispose of the phone with household waste. 2. Ask your governing authority about suitable methods of disposal which minimize the risk to the environment. The cardboard box, the plastic contained in the packaging and the pieces in the mobile phone can be recycled in accordance with the rules in force on recycling. 3. Always follow the existing rules on the subject. 4. Violators are subject to sanctions and measures established by law. The bin symbol and cross, located on the device means that when the equipment has reached the end of its useful life, it must be brought to collection centers, and that treatment must be separated from urban waste. To protect the environment, when you replace the batteries, remember to use public recycling bins specified for batteries. For more information, please visit www.tecdesk.com. 15 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - -Reorient or relocate the receiving antenna. - -Increase the separation between the equipment and receiver. - -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This Tecdesk Model 6 meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: AI Companion (FCC ID: 2BDUK-MODEL6 ) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for worn on the body is 1.279W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. CE Maintenance 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.The product shall only be connected to a USB interface of USB2.0. 3.Adapter shall be installed near the equipment and shall be easily accessible. 4.EUT Operating temperature range: -10° C to 55°C . 5.Adapter: The plug considered as disconnect device of adapter Power supply and ADP(rating): Input: DC 5V 1.0A 6.The device complies with RF specifications when the device used at 5mm you’re your body. 7.To prevent possible hearing damage. Do not listen at high volume levels for long periods. Declaration of Conformity Tecdesk (UK) Ltd. hereby declares that this Tecdesk Model 6 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10),This product is allowed to be used in all EU member states. June 2022 tecdesk.com 16

Tecdesk (UK) Ltd. 2024-01-17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BDUK-MODEL6) Tecdesk (UK) Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Cornel Calin Tecdesk (UK) Ltd. 2024.1.17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BDUK-MODEL6) Tecdesk (UK) Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Cornel Calin

Attestation Statements 2024-03-22 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2BDUK-MODEL6) Tecdesk (UK) Ltd., the undersigned, hereby authorize HOPEK CORPORATION INC to act as our designated U.S. agent for service of process, Tecdesk (UK) Ltd. accepts to maintain an agent for no less than three years after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. HOPEK CORPORATION INC accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: Tecdesk (UK) Ltd. Contact Name: Cornel Calin Address: Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK FRN: 0034548255 Telephone No: 86-186 8215 1582 Email: [email protected] Signature: Cornel Calin U.S. Agent Information: Company Name: HOPEK CORPORATION INC Address:4358 S BANNOCK ST ENGLEWOOD, CO 80110 United States FRN: 0034562900 Contact Name: Peter Davis Tel.: 561-235-6113 Email: [email protected] Signed by (printed name): Peter Davis Signature:

Tecdesk (UK) Ltd. 2024-01-17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen LGT Test Service Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Date: 2024-01-17 Name: Cornel Calin Title: Head of Production Company: Tecdesk (UK) Ltd.

Tecdesk (UK) Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-01-17 Subject; Request for Confidentiality FCC ID: 2BDUK-MODEL6 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure Part List PCB Layout SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cornel Calin/Tecdesk (UK) Ltd. Title: Head of Production

Page 1 of 5 Report No.: LGT23K114 Appendix - External Photographs of EUT Constructional Details Model: Model 6 Photo 1 Photo 2 Page 2 of 5 Report No.: LGT23K114 Photo 3 Photo 4 Page 3 of 5 Report No.: LGT23K114 Photo 5 Photo 6 Page 4 of 5 Report No.: LGT23K114 Photo 7 Photo 8 Page 5 of 5 Report No.: LGT23K114 Photo 9 Photo 10

Smart Tecdesk Model 6 Model: Model 6 FCC ID: 2BDUK-MODEL6 Input: 5V, 1.0A (by adapter); 3.8V, 2100mAh (by Li-ion battery pack) Tecdesk (UK) Ltd. Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK Importer: XXXXXXXXXXX XXXXXXXXXXXXXX

Page 1 of 8 Report No.: LGT23K114 Appendix - Internal Photographs of EUT Constructional Details Model: Model 6 Photo 1 Photo 2 Page 2 of 8 Report No.: LGT23K114 Photo 3 Photo 4 Page 3 of 8 Report No.: LGT23K114 Photo 5 Photo 6 Page 4 of 8 Report No.: LGT23K114 Photo 7 Photo 8 Page 5 of 8 Report No.: LGT23K114 Photo 9 Photo 10 Page 6 of 8 Report No.: LGT23K114 Photo 11 Photo 12 GSM/WCDMA/LTE DIV ANT Wi-Fi ANT Page 7 of 8 Report No.: LGT23K114 Photo 13 Photo 14 LTE MAIN ANT Page 8 of 8 Report No.: LGT23K114 Photo 15

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory.The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China EMC TEST REPORT Product Name: Tecdesk Model 6 Model Name: Model 6 FCC ID: 2BDUK-MODEL6 Issued For : Tecdesk (UK) Ltd. Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT23K114EM03 Sample Received Date: Nov. 27, 2023 Date of Test: Nov. 27, 2023 – Jan. 12, 2024 Date of Issue: Jan. 12, 2024 Report No.: LGT23K114EM03 Page 2 of 19 TEST REPORT CERTIFICATION Applicant: Tecdesk (UK) Ltd. Address: Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK Manufacturer: Tecdesk (UK) Ltd. Address: Santok House, Unit L, Braintree Industrial Estate, Braintree Road, Ruislip, HA4 0EJ, UK Product Name: Tecdesk Model 6 Trademark: Tecdesk Model Name: Model 6 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR Part 15 Subpart B ANSI C63.4-2014 PASS Prepared by: Approved by: Terry Zhao Vita Li Engineer Technical Director Report No.: LGT23K114EM03 Page 3 of 19 Table of Contents 1. TEST SUMMARY 5 1.1 TEST LABORATORY 6 1.2 MEASUREMENT UNCERTAINTY 6 2. GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF THE EUT 7 2.2 DESCRIPTION OF THE TEST MODES 8 2.3 DESCRIPTION OF THE SUPPORT UNITS 8 2.5 MEASUREMENT INSTRUMENTS LIST 9 3. EMC EMISSION TEST 10 3.1 CONDUCTED EMISSION MEASUREMENT 10 3.2 RADIATED EMISSION MEASUREMENT 14 APPENDIX I - TEST SETUP 18 Report No.: LGT23K114EM03 Page 4 of 19 Revision History Rev. Issue Date Revisions 00 Jan. 12, 2024 Initial Issue Report No.: LGT23K114EM03 Page 5 of 19 1. TEST SUMMARY EMC Emission Standard Test Item Limit Judgement Remark FCC 47 CFR Part 15 Subpart B ANSI C63.4-2014 Conducted Emissions Class B PASS Radiated Emissions Below 1GHz Class B PASS Radiated Emissions Above 1GHz Class B PASS Note 1 Note 2 Note: 1 “N/A” denotes test is not applicable in this Test Report 2 If the highest frequency of the internal sources of the EUT is less than 108 MHz, the measurement shall only be made up to 1 GHz. If the highest frequency of the internal sources of the EUT is between 108 MHz and 500 MHz, the measurement shall only be made up to 2 GHz. If the highest frequency of the internal sources of the EUT is between 500 MHz and 1 GHz, measurement shall only be made up to 5 GHz. If the highest frequency of the internal sources of the EUT is above 1 GHz, the measurement shall be made up to 5 times the highest frequency or 40 GHz, whichever is less. Report No.: LGT23K114EM03 Page 6 of 19 1.1 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate A2LA Certificate No.: 6727.01 FCC Registration No.: 746540 CAB ID: CN0136 1.2 MEASUREMENT UNCERTAINTY Test Item Measurement Frequency Range MHz Uncertainty dB Conducted Emissions at AC mains power port 0.009 ~ 30 2.80 Radiated Emissions 0.009 ~ 30 2.16 Radiated Emissions 30 ~ 1000 4.40 Radiated Emissions 1000 ~ 18000 5.49 Note: 1. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. 2. The measurement uncertainty is not included in the test result. Report No.: LGT23K114EM03 Page 7 of 19 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name: Tecdesk Model 6 Trademark: Tecdesk Model Name: Model 6 Series Model: N/A Model Difference: N/A Adapter: Model: KA1602-0501000DEU Input: AC 100-240V, 50/60Hz, 0.35A Output: 5.0V,1.0A Battery: Capacity: 2100mAh Rated Voltage: 3.8 V Test Voltage: AC: 120V/60Hz Battery: 3.8V Hardware Version: Model 6 Software Version: MODEL6_SW_V2.0_HW_V1.0_VOWFVLTE_240424 Note: For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Report No.: LGT23K114EM03 Page 8 of 19 2.2 DESCRIPTION OF THE TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possibly have effect on EMI emission level. Each of these EUT operating mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Test Mode Description Mode 1 Charging+GSM link+BT+Wi-Fi+Camera recording+LAN+earphone Mode 2 Charging+WCDMA link+BT+Wi-Fi+Camera recording+LAN+earphone Mode 3 Charging+LTE link+BT+Wi-Fi+Camera recording+LAN+earphone Note: Only the data of worst-case mode 1 was recorded in this report. 2.3 DESCRIPTION OF THE SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Accessories Equipment Description Manufacturer Model S/N Rating Adapter Tecdesk (UK) Ltd. KA1602-0501 000DEU N/A Input: 100-240V ~ 50/60Hz 0.35A Output: 5V, 1A USB-A to USB-C Cable N/A N/A N/A 1.5m Auxiliary Equipment Description Manufacturer Model S/N Rating Laptop Lenovo HKF-16 N/A N/A Earphone VESAFE 39630078 N/A N/A RJ45 Cable N/A N/A N/A 1m Wireless router NETIS NX3-T N/A N/A Note: (1) For detachable type I/O cable should be specified the length in cm in『Length』column. Report No.: LGT23K114EM03 Page 9 of 19 2.5 …

Text truncated - open the document above for the full version.

Report No.: LGT23K114EM03Page 18 of 19 APPENDIX I - TEST SETUP Set-up for Conducted Emission on AC Mains (CE) Set-up for Radiated Emission (RE), Below 1GHz Report No.: LGT23K114EM03Page 19 of 19 Set-up for Radiated Emission (RE), ABOVE 1GHZ END OF THE REPORT