2BDW6XB-WL3053-in-1 Wireless Charger

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.- - Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment compl ies with FCC radiation exposure limits set forth for an uncontr olled environment. This equipment should be installed and o perated with a minimum distance of 20 cm between the radia tor and your body.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofDongguanXianbangIntelligentTechnologyCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:DongguanXianbangIntelligentTechnologyCo.,Ltd ProductDescription:3-in-1WirelessCharger FRN:0034574525 GranteeCode:2BDW6 FCCID:2BDW6XB-WL305 ContactName:QunTong Address:Room303,No.9,YuchengRoad,Chang’anTown,DongguanCity,Guangdong Province,China TelephoneNo:158183124562 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/11/28 Applicant’sName: DongguanXianbangIntelligentTechnology Co.,Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ManagerTitle:Manager SignatureSignature

Rev 1/26/2023 Dongguan Xianbang Intelligent Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BDW6XB-WL305 [Dongguan Xianbang Intelligent Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Dongguan Xianbang Intelligent Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Qun Tong Rev 1/26/2023 Dongguan Xianbang Intelligent Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Nov. 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BDW6XB-WL305 [Dongguan Xianbang Intelligent Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Qun Tong

Dongguan city DFL Electronic Technology Co.,LTD No. 107, Xinfeng West Road, Shige Town, Dongguan City TEL：0769-86016320 FAX：0769-86372427 CUSTOMER: PART NO.: DESCRIPTION: SPECIFICATION: DATE: 20240815 SPECIFICATION FOR APPROVEAL TRX APPROVAL make audit CUSTOMER APPROVAL Result: qualifieddisqualification Others Acknowledgment Date engineering approve Acknowledgment Date Pan Ximing Qiu Zhihui 20240815 Coil + Magnetic Plate 0.08 x 10^5 P wire coil, ∅ 38.5 x 15, inductance 6.8uH, magnetic spacer ∅44 x 1.0 (with open slot) magnetic edge 100mm SPECIFICATION 二、schematic diagram: PREPARED BY/DATE CHECKED BY/DATE Dongguan city DFL Electronic Technology Co.,LTD DESC Rev:A Customer: Date: Description: 一、DIMENSION:(mm) A B C D G H I Note: 三、WindingSpecification: NO.TERMINALWIRETurns Winding Direction 四、ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. CUSTOMEU/DATE TERMINALITEMSPECIFICATION TEST FREQUENCYTEST EQUIPMENTS 1 2 3 4 IND. IND. Q值 DCR 20 240815 44.0±1.5 15.0±1.0 38.5 2.0 1 6.8UH 100KHZ/1.0V 1. The coil is placed against the hard magnet with the magnetic sheet having holes and double-slot coils positioned in the center. 2. The back of the magnetic sheet is covered with white double-sided adhesive tape with ears. 3. An 8mm heat-resistant adhesive tape is wound at the exit position of the coil. 4. The coil must not be loose. J K L SH DA 1062 Coil + Magnetic Plate .0 3.0 0.08 × 10^5 P wire mesh fabric 12TS anticlockwise 3.5±1.5 B C A E D E F 0-15 38.5 -100 -FR + 100 ±

Dongguan city DFL Electronic Technology Co.,LTD ProductSpecification No. 107, Xinfeng West Road, Shige Town, Dongguan City TEL ：0769-86016320 FAX ：0769-86372427 CUSTOMER: PART NO.: DESCRIPTION: SPECIFICATION: DATE: CUSTOMER VALIDATE: DATE: JYC-F19.5X25.5-90-FR 20251121 Double coil + double-layer magnetic sheet 101.0217 产品੟号: SPECIFICATION 二、原理图（schematic diagram:） 拟制/日期PREPARED BY/DATE 审核/日期CHECKED BY/DATE 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD DESC Rev:A 版本 Customer: Date: Description: 一、尺寸DIMENSION:(mm) A B C D E F G H I 注: 三、绕线参数(WindingSpecification:) 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 四、电气特性 ELECTRICAL CHARACTERISTICS: 温度 TEMPERATURE:25±10°C,湿度 RELATIVE HUMIDITY:65±20% 序号 NO. 客户/日期CUSTOMEU/DATE 端子 TERMINAL 项目 ITEM 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 2 3 4 IND. IND. Q值 DCR 20210521 41.0±1.5 19.5±0.5 27.5±0.5 1 0.08X105P丝包线 9TS 逆时针 7.1uH±10%加磁片 100KHZ/1.0V 双线圈+硬磁 48.0±1.5 1.磁片厚度正公差,磁 片外径为负公差 2.线圈出线位置缠5MM 高温胶带 3.线圈不可松线 4.带耳朵双面胶 5.中性包装 J K L 48.0±1.5 JYC 27.5±0.5 19.5±1.5 SHDA 1062 JYC-F19.5X27.5-70-FR(CC05) 41.0±1.5 8.0±1.5 70.0±2.0 0.8±0.2 3.5±1.5 M N O P 93.0±1.0 51.5±1.0 46.5±1.0 K F E G H B A C D I J P L N M O 40.0±0.5 7.3uH±10%加磁片 100KHZ/1.0V SHDA 1062 SPECIFICATION 二、schematic diagram: PREPARED BY/DATE CHECKED BY/DATE Dongguan city DFL Electronic Technology Co.,LTD DESC Rev:A Customer: Date: Description: 一、DIMENSION:(mm) A B C D E F G H I Note: 三、WindingSpecification: NO.TERMINALWIRETurns Winding Direction 四、ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. CUSTOMEU/DATE TERMINALITEMSPECIFICATION TEST FREQUENCYTEST EQUIPMENTS 1 2 3 4 IND. IND. Q值 DCR 20251121 40.0±1.5 17.5±0.5 27.5±0.5 1 0.08 × 10^5 P wire mesh fabric 9TS anticlockwise 6.8uH ± 10% with magnetic sheet 100KHZ/1.0V Double coil + hard magnetic material 50.0±1.5 1. The thickness of the magnetic sheet is within the tolerance range, while the outer diameter of the magnetic sheet is within the negative tolerance range. 2. A 5mm high-temperature adhesive tape is wound at the outlet position of the coil. 3. The coil must not be loosened. 4. Double-sided adhesive tape with ears is provided. 5. Neutral packaging is used. J K L 47.0±1.5 25.5±0.5 19.5±1.5 SHDA 1062 JYC-F19.5X25.5-90-FR 41.0±1.5 5.0±2.5 90.0±2.0 0.8±0.2 3.5±1.5 M N O P 93.0±1.0 51.5±1.0 46.5±1.0 K F E G H B A C D I J P L N M O 7.0uH ± 10% with magnetic sheet 100KHZ/1.0V SHDA 1062

一、Plan view diagram: Unit: MM 二、Product Parameter： foot position wire diameter number of turns Note 1-20.05* 75P7+7T silk-covered wire 審核 III. Technical Requirements: 1. Attach 3MM high-temperature adhesive tape to the corresponding position of the coil, secure the wire ends to prevent them from loosening. 2. According to the customer's requirements, cut the excessively long wire ends, tin them, and ensure that the tin coating depth is uniformly 2±1MM. 3. Apply appropriate white glue on the magnetic plate, attach the coil, and during the process, keep the product surface clean and tidy. 4. The used hard magnetic plates are perforated and without any damage. 四、electrical parameter： No.Name materials SupplierNote 1 silk-covered wire 0.05* 75P 2 magnetic sheet G27 Hard Base Material 3 high-temperature adhesive tape 3MM 4 tin High-temperature environmental protection 5 white emulsion BY882 6 magnet 8*2.7*3800100GS 7 gum Diameter 20MM 1.Inductance value: PIN 1 - 2 = 9.3 ± 0.5 uH The above inductance values are based on the Quanhua 1062 instrument, with a frequency of 100 KHz and a peak voltage of 1 Vrms, or equivalent instruments. 五、bill of materials ： 我司型號 审核 Dongguan city DFL Electronic Technology Co.,LTD No. 107, Xinfeng West Road, Shige Town, Dongguan City

Dongguan Xianbang Intelligent Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 1, 2025 Subject; Request for Confidentiality FCC ID: 2BDW6XB-WL305 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Qun Tong Title: Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Dongguan Xianbang Intelligent Technology Co., Ltd Date: Nov. 28, 2025 Product Model Number: WL305 FCC ID: 2BDW6XB-WL305 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 158183124562 On behalf of: Dongguan Xianbang Intelligent Technology Co., Ltd

Ext Photos Model: WL305 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

FCC ID:2BDW6XB-WL305

Int Photos Model: WL305 Photo 1 Photo 2 Photo 3 Photo 4 Phone ANT Earbuds ANT Watch ANT Photo 5 Photo 6 Photo 7 Photo 8 Photo 9

- Page 1 of 11 - Report No.: HB20251117056E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 3-in-1 Wireless Charger Trade Mark: N/A Model Number: WL305 FCC ID: 2BDW6XB-WL305 Prepared for Dongguan Xianbang Intelligent Technology Co., Ltd Room 303, No.9, Yucheng Road, Chang’an Town, Dongguan City, Guangdong Province, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20251117056E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 11 - Page 3 of 11 - Report No.: HB20251117056E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Dongguan Xianbang Intelligent Technology Co., Ltd Address ................................. : Room 303, No.9, Yucheng Road, Chang’an Town, Dongguan City, Guangdong Province, China Manufacturer's Name .......... : Dongguan Xianbang Intelligent Technology Co., Ltd Address ................................. : Room 303, No.9, Yucheng Road, Chang’an Town, Dongguan City, Guangdong Province, China Product description Product name ........................ : 3-in-1 Wireless Charger Model Number ....................... : WL305 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Nov. 17, 2025~Nov. 28, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20251117056E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Nov. 28, 2025 Origi…

Text truncated - open the document above for the full version.

- Page 1 of 33 - Report No.: HB20251117056E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 3-in-1 Wireless Charger Trade Mark: N/A Model Number: WL305 FCC ID: 2BDW6XB-WL305 Prepared for Dongguan Xianbang Intelligent Technology Co., Ltd Room 303, No.9, Yucheng Road, Chang'an Town, Dongguan City, Guangdong Province, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 33 - Report No.: HB20251117056E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 24 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 26 - Page 3 of 33 - Report No.: HB20251117056E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Dongguan Xianbang Intelligent Technology Co., Ltd Address ................................. : Room 303, No.9, Yucheng Road, Chang'an Town, Dongguan City, Guangdong Province, China Manufacturer's Name .......... : Dongguan Xianbang Intelligent Technology Co., Ltd Address ................................. : Room 303, No.9, Yucheng Road, Chang'an Town, Dongguan City, Guangdong Province, China Product description Product name ........................ : 3-in-1 Wireless Charger Model Number ....................... : WL305 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Nov. 17, 2025~Nov. 28, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 33 - Report No.: HB20251117056E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: WL305 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted Emission MPE