2BDWL2417249TELUS Indoor camera device

Howto pairyourTELUSIndoorcamera deviceto theSmartHome+app Step 1. Initiatedevice pairingprocess OnceinsidetheSmartHome+app,youwillbemet witha prompt to addyourdevices.ClicktheAddCamerabuttonto begin theCamerapairingprocess. SelecttheAddCamerabuttoninthepurpletexttobeginonboardingyourTELUScameradevice. Step 2. ScandeviceQR code Youwillbepromptedto scantheQR codeonyourdevice.AllowtheSmartHome+appto accessyourcamerabyfollowing th e onscreenprompts,andthenscantheQR codeonthebackof yourdeviceoronthepackaging. ScantheQRcodeonyourdeviceusingyourphone’scamera. Step3. Begininstallation Forphysicalinstallationinstructions(DIY),chooseBeginInstallation: Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 1 Step4. ConfirmPackage contents Verifythatyouhaveeverythingmentionedinthelistandhit“Continue” Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 2 Step5. Whatyou’llneed Verifythatyouhaveeverythingmentionedinthelistandhit“Continue” Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 3 Step6. Selectalocation Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 4 Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 5 Step7. OptionalMounting instructions Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 6 Step8. TestWi-Fi Requirements Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 7 Step9. Turnonthe camera Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 8 Step10. WaitforLEDlight Step11. Connectto Bluetooth Onceyourcamerahasbeeninstalled,youwillbepromptedtopairyourdeviceviaBluetooth.Followtheonscreenprompts todothis.EnsureyourcameraisonandreadytopairwithBluetooth.SuccessfulBluetoothpairingwillthenpromptyouto connectyourdeviceviaWiFi.SelecttheConnecttoWiFibuttontocontinue. Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 9 Step12. ConnecttoWi-Fi OncethedeviceispairedtoBluetooththenextstepistopairyourdeviceviaWiFi.TheappwillsearchforyourlocalWiFi networks.Selectyourpreferrednetworkandinputyournetworkaccesscredentials.Followingsuccessfulauthenticationto yourWiFinetwork,yourdevicewillnowbepaired.SelectcontinueatthebottomoftheDeviceConnectedscreento continue. Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 10 Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 11 Step23. Configureyour devicepreferences OnceyourdeviceisconnectedtoBluetoothandWiFi,itwillbeaddedtoyourSmartHome+app.Thisprocessmaytakea coupleofsecondstobefullyauthenticated.Uponsuccessfulauthentication,youwillbepromptedtoconfigureyourEvent Settingspreferences.Configureyourpreferences. Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 12 Thisdocumentisconfidentialandrestricted.Itisalivingdocumentandmaybemodifiedwithoutpriornotice. Lastupdate:08/28/2024 13

US FCC ID: 2BDWL2417249 Federal Communications Commission (FCC) Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Product Name: TELUS Indoor Camera device Model Number: ICF Hardware Version: A TELUS SKU Number: 2417249 FCC: 2BDWL2417249 Manufacturer: TELUS Communications Inc. Address: 510 West Georgia Street, Vancouver, BC, V6B 0M3, Canada 12 PN: XXXXX-XXX-XX CHANGE NOTE D esigner: SallyApprover: Keller IC Certification Insert: Material: 105g wood-free paperrecycled paper, 4C Size: 100×94mm,Dimensional tolerance: ±1mm Font: HelveticaNowDisplay Regular 5pt 2024/08/21 2024/09/05 First release. “TELUS Indoor Camera” device 94 mm 100 mm 5mm 5mm

(TELUS Communications Inc.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-09-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BDWL2417249 [TELUS Communications Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, TianHeng Consulting, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. [TELUS Communications Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. TianHeng Consulting, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Sincerely, Designated U.S. Agent Information: Name: TianHeng Consulting, LLC FRN: 0033401258 Contact Person: Yingzhi Chen Address: 30 N Gould St Ste 44116, Sheridan, WY 82801, United States Tel.: +1 307-291-9708 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: TELUS Communications Inc. Grantee Code: 2BDWL FRN: 0034571810 Contact Name: Roman Soltykevych Address: 7th Floor 510 West Georgia Street Vancouver V6B0M3 Canada Tel.: +1 (780) 499-0422 Email: [email protected] Applicant Signature:

TELUS Communications Inc. CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT Date:2024-09-04 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID: 2BDWL2417249 To Whom It May Concern: As required by section 2.911(d)(5)(i), [TELUS Communications Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii), [TELUS Communications Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely yours, Signature Printed Name: Roman Soltykevych Company: TELUS Communications Inc. Job Title: Manager of Technology Strategy Email: [email protected] Telephone: +1 (780) 499-0422

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (TELUS Communications Inc.) Declaration of Authorization We Name: <TELUS Communications Inc.> Address: 7th Floor 510 West Georgia Street Vancouver V6B0M3 Canada City: Vancouver Country: Canada Declare that: Name Representative of agent: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: TELUS Indoor camera device Type designation: ICF Trademark: TELUS Validity/ expiry date:2025-09-04 on our behalf. Date: 2024-09-04 City: Edmonton Name: Roman Soltykevych Function: Manager of Technology Strategy Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

TELUS Communications Inc. August 28, 2024 Power of Attorney To whom it may concern: I, the undersigned, Stephen Humpston , hereby authorize the person(s) listed below to act in place of myself to sign all related documents for FCC application of TELUS Communications Inc.. Name : Roman Soltykevych Title : Manager of Technology Strategy E-mai : [email protected] Fax : N/A Tel : +1 (780) 499-0422 Company Name : TELUS Communications Inc. Company Address : 7th Floor 510 West Georgia Street Vancouver V6B0M3 Canada Fax : N/A Authorization peroid: August 28, 2024 ~ August 28, 2025 Should you have any question regarding this power of attorney, please don’t hesitate to contact me. Sincerely, Name: Stephen Humpston Company Name: TELUS Communications Inc. Title: Senior Technical Product Manager Tel: +1(778)873-5111 Fax: NA E-mail: [email protected]

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: TELUS Communications Inc. Address: 7th Floor 510 West Georgia Street City: Vancouver Country: Canada To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2BDWL2417249 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2024-09-04 Name and signature of applicant: Roman Soltykevych Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Statement Declaration Letter We, the undersigning company Company Name: TELUS Communications Inc. Address: 7th Floor 510 West Georgia Street Vancouver V6B0M3 Canada Hereby confirm that the following products: Product description: TELUS Indoor camera device Type designation: ICF Trademark: TELUS That This product turns off the BT function through software. Date: 2024-09-04 City: Edmonton AB T5J 0E5 Name: Roman Soltykevych Function: [email protected] Signature: .

Input | Alimentation: 20W USB-PD Model | Modèle: ICF IC:31809-2417249 FCC ID:2BDWL2417249 SKU | UGS:2417249 Made in Vietnam | Fabriqué au Vietnam IC:31809-2417249 FCC ID:2BDWL2417249 SKU | UGS:2417249 Made in Vietnam | Fabriqué au Vietnam Input | Alimentation: 20W USB-PD Model | Modèle: ICF MAC: 01:02:03:04:05:06 Serial | En Série: 123456789012345678 12x12mm Sally 2 0 2 4/09/06 keller X 4 Notes: 1.material：Acrylic 50#black PET + matte PP printable, (T: -40 to 50°C) 2.Dimensions：29.6×32.35mm Graphics and text are pre printed by the supplier!MAC & SN & 2D codes are variable information and are printed at the factory. After printingBefore printing 1.3mm1.3mm 0.95mm 0.95mm 1mm 1mm 1mm 0.57mm Helvetica Regular 3pt ∅7.85+0.3mm 29. 7 mm-0. 3mm 14.7mm 32.45 mm-0.3mm 10.92 mm 13.67 mm X1 X2 X3 X4 首版发布 增加标签文字内容 变更刀模，和标签左右距离底纸边缘各2mm 基于安规要求，添加FCC ID Indoor camera Product label 3mm 2mm

Appendix No.: EP-2407E003-1 APPENDIX-EUT PHOTOS Project No.: 2407E003 Page 5 of 9 Aux Ant. Main Ant. Appendix No.: EP-2407E003-1 APPENDIX-EUT PHOTOS Project No.: 2407E003 Page 6 of 9 Appendix No.: EP-2407E003-1 APPENDIX-EUT PHOTOS Project No.: 2407E003 Page 7 of 9 Appendix No.: EP-2407E003-1 APPENDIX-EUT PHOTOS Project No.: 2407E003 Page 8 of 9 Appendix No.: EP-2407E003-1 APPENDIX-EUT PHOTOS Project No.: 2407E003 Page 9 of 9

Report No.: BTL-FCCP-5-2407E003 Project No.: 2407E003 Page 1 of 8 Report Version: R01 FCC RF Exposure Report FCC ID: 2BDWL2417249 Report No. : BTL-FCCP-5-2407E003 Equipment : TELUS Indoor camera device Model Name : ICF Brand Name : TELUS Applicant : TELUS Communications Inc. Address : 7th Floor,510 West Georgia Street,Vancouver, BC,V6B0M3 Canada Standard(s) : 47 CFR § 2.1091 FCC Guidelines for Human Exposure IEEE C95.1 Date of Receipt : 2024/8/12 Date of Test : 2024/8/12 ~ 2024/8/24 Issued Date : 2024/9/9 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Poken Huang, Engineer Approved by : Peter Chen, Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-5-2407E003 Project No.: 2407E003 Page 2 of 8 Report Version: R01 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-5-2407E003 R00 Original Report. 2024/9/6 Invalid BTL-FCCP-5-2407E003 R01 Only the Part number of the antenna was added. 2024/9/9 Valid Report No.: BTL-FCCP-5-2407E003 Project No.: 2407E003 Page 3 of 8 Report Version: R01 1. LIMITS According to § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. (e) Limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields (Table 1). Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1.500 f/300 <6 1.500-100.000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1.500 f/1500 <30 1.500-100.000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent power density. Report No.: BTL-FCCP-5-2407E003 Project No.: 2407E003 Page 4 of 8 Report Version: R01 2. APPLIED EXEMPTION CRITERIA Refer to KDB 447498 D04, ticked item is applied: For RF Exposure Test Exemptions for Single Source: ☐ 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. ☐ SAR-Based Exemption A more comprehensive exemption, considering a variable power threshold that depends on both the separation distance and power, is provided in § 1.1307(b)(3)(i)(B). This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. Accordingly, a RF source is considered an RF exempt device if its available maximum time-averaged (matched conducted) power or its effective radiated power (ERP), whichever is greater, are below a specified threshold. This exemption threshold was derived based on general population 1-g SAR requirements and is detailed in Appendix C. § 1.1307(b)(3)(i)(B): Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by: Report No.: BTL-FCCP-5-2407E003 Project No.: 2407E003 Page 5 of 8 Report Version: R01 ☒ MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-averaged power.10 For this …

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 1 of 321 Report Version: R01 FCC Radio Test Report FCC ID: 2BDWL2417249 Report No. : BTL-FCCP-3-2407E003 Equipment : TELUS Indoor camera device Model Name : ICF Brand Name : TELUS Applicant : TELUS Communications Inc. Address : 7th Floor,510 West Georgia Street,Vancouver, BC,V6B0M3 Canada Radio Function : RLAN 5 GHz (U-NII 1, U-NII 2A, U-NII 2C, U-NII 3) FCC Rule Part(s) : FCC CFR Title 47, Part 15, Subpart E (15.407) Measurement Procedure(s) : ANSI C63.10-2013 Date of Receipt : 2024/8/12 Date of Test : 2024/8/12 ~ 2024/8/24 Issued Date : 2024/9/9 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Poken Huang, Engineer Approved by : Peter Chen, Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 2 of 321 Report Version: R01 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the Customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 3 of 321 Report Version: R01 CONTENTS REVISION HISTORY 5 1 SUMMARY OF TEST RESULT S 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 1.4 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 8 1.5 DUTY CYCLE 10 2 GENERAL INFORMATION 13 2.1 DESCRIPTION OF EUT 13 2.2 TEST MODES 16 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 18 2.4 SUPPORT UNITS 19 3 AC POWER LINE CONDUCTED EMISSIONS TEST 20 3.1 LIMIT 20 3.2 TEST PROCEDURE 20 3.3 DEVIATION FROM TEST STANDARD 20 3.4 TEST SETUP 21 3.5 TEST RESULT 21 4 RADIATED EMISSIONS TEST 22 4.1 LIMIT 22 4.2 TEST PROCEDURE 23 4.3 DEVIATION FROM TEST STANDARD 23 4.4 TEST SETUP 24 4.5 EUT OPERATING CONDITIONS 25 4.6 TEST RESULT – BELOW 30 MHZ 25 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 25 4.8 TEST RESULT – ABOVE 1 GHZ 25 5 BANDWIDTH TEST 26 5.1 LIMIT 26 5.2 TEST PROCEDURE 26 5.3 DEVIATION FROM TEST STANDARD 26 5.4 TEST SETUP 26 5.5 EUT OPERATING CONDITIONS 26 5.6 TEST RESULT 26 6 MAXIMUM OUTPUT POWER TEST 27 6.1 LIMIT 27 6.2 TEST PROCEDURE 27 6.3 DEVIATION FROM TEST STANDARD 27 6.4 TEST SETUP 27 6.5 EUT OPERATING CONDITIONS 27 6.6 TEST RESULT 27 7 POWER SPECTRAL DENSITY 28 7.1 LIMIT 28 7.2 TEST PROCEDURE 28 7.3 DEVIATION FROM TEST STANDARD 28 7.4 TEST SETUP 28 7.5 EUT OPERATING CONDITIONS 28 Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 4 of 321 Report Version: R01 7.6 TEST RESULT 28 8 LIST OF MEASURING EQUIPMENTS 29 9 EUT TEST PHOTO 31 10 EUT PHOTOS 31 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 32 APPENDIX B RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 35 APPENDIX C RADIATED EMISSIONS - ABOVE 1 GHZ 38 APPENDIX D BANDWIDTH 211 APPENDIX E MAXIMUM OUTPUT POWER 248 APPENDIX F POWER SPECTRAL DENSITY 285 Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 5 of 321 Report Version: R01 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-3-2407E003 R00 Original Report. 2024/9/6 Invalid BTL-FCCP-3-2407E003 R01 Only the Part number of the antenna was added. 2024/9/9 Valid Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 6 of 321 Report Version: R01 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.407(b) Radiated Emissions APPENDIX C APPENDIX D APPENDIX E Pass ------ 15.407(a) 15.407(e) Bandwidth APPENDIX E Pass ------ 15.407(a) Maximum Output Power APPENDIX F Pass ------ 15.407(a) Power Spectral Density APPENDIX G Pass ------ 15.407(g) Frequency Stability ------ PA SS NOTE (5) 15.203 Antenna Requirement ------ Pass NOTE (4) 15.407(c) Automatically Discontinue Transmission ------ Pass NOTE (3) NOTE: (1) ”N/A” denotes test is not applicable in this Test Report. (2) The report format version is TP.1.1.1. (3) During no any information transmission, the EUT can automatically discontinue transmission and become standby mode for power saving. the EUT can detect the controlling signal of ACK message transmitting from remote device …

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 214 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11n (HT40)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 38 5190 56.600 37.400 46 5230 63.990 37.800 CH38 CH46 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 215 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11ac (VHT20)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 36 5180 24.690 18.000 40 5200 22.850 18.100 48 5240 21.750 18.000 CH36 CH40 CH48 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 216 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11ac (VHT40)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 38 5190 76.208 39.800 46 5230 76.790 42.000 CH38 CH46 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 217 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11ac (VHT80)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 42 5210 90.000 78.000 CH42 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 218 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11ax (HE20)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 36 5180 21.950 19.200 40 5200 21.799 19.200 48 5240 22.050 19.200 CH36 CH40 CH48 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 219 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11ax (HE40)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 38 5190 76.405 39.200 46 5230 61.390 38.400 CH38 CH46 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 220 of 321 Report Version: R01 Test Mode UNII-1_TX IEEE 802.11ax (HE80)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 42 5210 86.390 78.000 CH42 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 221 of 321 Report Version: R01 Test Mode UNII-2A_TX IEEE 802.11a_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 52 5260 27.400 17.300 60 5300 25.298 17.300 64 5320 24.809 17.400 CH52 CH60 CH64 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 222 of 321 Report Version: R01 Test Mode UNII-2A_TX IEEE 802.11n (HT20)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 52 5260 23.990 18.200 60 5300 24.690 18.100 64 5320 23.100 18.100 CH52 CH60 CH64 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 223 of 321 Report Version: R01 Test Mode UNII-2A_TX IEEE 802.11n (HT40)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 54 5270 58.190 37.400 62 5310 61.700 37.400 CH54 CH62 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 224 of 321 Report Version: R01 Test Mode UNII-2A_TX IEEE 802.11ac (VHT20)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 52 5260 21.550 18.000 60 5300 21.589 18.000 64 5320 22.050 18.000 CH52 CH60 CH64 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 225 of 321 Report Version: R01 Test Mode UNII-2A_TX IEEE 802.11ac (VHT40)_Main Ant. Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 54 5270 66.790 38.400 62 5310 77.300 38.000 CH54 CH62 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-3-2407E003 Project No.: 2407E003 Page 226 of 321 Report Version: R01 Test Mode UNII-2A_TX IEEE…

Text truncated - open the document above for the full version.