2BDXE-2606086Ergonomic 2.4Ghz Mouse

Ergonomic 2.4Ghz Mouse Model: 2606086 USER MANUAL Thank you for choosing the RadioShack Ergonomic 2.4Ghz Mouse 2606086! We appreciate your purchase and hope you enjoy its quality. To get the most out of your device, please read these instructions carefully and keep this guide for future reference. Table of Contents 1. Product Description 2. Safety Information 3. Package Contents 4. Specifications 5. Quick Start Guide o 5.1 Know your mouse o 5.2 Mode Connectivity o 5.3 Charging and Battery Management 6. Maintenance and Care 7. Troubleshooting Guide 8. FCC Part 15 Compliance 1) Product Description The RadioShack Ergonomic 2.4Ghz Mouse is a high-performance, ergonomic mouse designed. It has a high-precision sensor, and programmable macro functionality for professional use. Key highlights: • Connectivity: 2.4 GHz wireless • Sensor: Hunter Sun + PAW3212 high-precision sensor • DPI: 800-1200-1600-2400-3200- 4800 DPI • Polling rate: up to 125 Hz • Battery: Built-in 500 mA lithium-ion • Battery life: Up to ~38 hours (typical), standby up to ~300 days • Switches: > 5 million silent clicks switch 2) Safety Information • Read all instructions before use. • Do not expose to liquids or excessive moisture. • Keep away from heat sources and direct sunlight. • Use on stable surfaces; ensure adequate ventilation around the device. • Avoid opening or modifying internal components; seek authorized service if needed. • If servicing is required, use authorized personnel. 3) Package Contents • 1x Gaming mouse • 1x USB receiver (plugged into the mouse) • 1x User manual • 1x Type-C cable 4) Specifications • Modes: Wired, 2.4 GHz wireless • Key count: 6 • Material: ABS • Color: Black • Chipset: Hunter Sun + PAW3212 • DPI settings: 800-1200-1600-2400-3200-4800 • Light: None (N/A) • Switch lifetime: > 5 million silent clicks switch • Polling rate: 125 Hz • Interface: USB-C • Working distance (wireless): up to 10 m • Battery: 500 mA (built-in) • Charging: USB-C, 1–2 hours • Operating current: ~13 mA • Operating time: ~38 hours • Standby time: ~300 days • Weight: ~118 ± 5g (including receiver) (±3 g). • Dimensions: 108L X 71W X 69Hmm 5) Quick Start Guide 5.1Know your Mouse: Left Key Right Key Scroll Whell DPI Key Forward Backward On/ Off 5.2 Mode Connectivity 2.4Ghz 1. Remove the mouse from the packaging. 2. Turn the mouse switch to the ON position. The red indicator light on the bottom will illuminate and then turn off. 3. Insert the receiver into a USB port on your computer. Once the connection is established, the mouse is ready to use. Note • If the cursor does not move correctly during use, please check the battery level. • If the battery is low, charge the mouse promptly. 5.3 Charging and Battery Management • When charging, the red LED indicator is on. • When charging completes, the red LED indicator will turn off. 6) Maintenance and Care • Clean with a dry or slightly damp cloth; avoid harsh chemicals. • Do not attempt to disassemble. • Store in a cool, dry place. 7) Troubleshooting Guide • The table below provides a quick reference for common symptoms, probable causes, and recommended remedies. Symptom Probable Cause Troubleshooting / Remedy Device won’t power on Battery depleted; power switch off - Verify power switch is ON - Charge battery with the supplied cable - Check for visible damage 2.4G receiver not recognized Missing driver; USB port issues; receiver not seated - Re-seat receiver - Try a different USB port (prefer USB 2.0/2.4G support) - Update OS/driver if needed DPI not changing DPI cycle not registering; sensor issue - Press D DPI button to cycle; verify cursor speed matches setting - Re-seat battery if possible Cursor skips or stalls Dirty sensor or surface; battery low - Clean optical sensor area; recharge or replace battery - Use a clean, flat surface Buttons not registering Debris under buttons - Clean around button edges; check for obstruction Indicator LEDs not lighting LED fault; power issue - Check power supply and battery; inspect connections Connectivity intermittently drops Interference; range limit; driver issues - Move closer to host or away from interference sources (microwave ovens, routers) - Re-pair and ensure drivers updated 8) FCC Part 15 Compliance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ratón ergonómico de 2,4 GHz Modelo: 2606086 MANUAL DE USUARIO ¡Gracias por elegir el ratón ergonómico RadioShack de 2,4 GHz 2606086! Apreciamos su compra y esperamos que disfrute de su calidad. Para aprovechar al máximo su dispositivo, lea atentamente estas instr…

Text truncated - open the document above for the full version.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: RADIOSHACK WORLDWIDE CORP. Address: AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 FCC ID: 2BDXE-2606086 Date: April 13, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [RADIOSHACK WORLDWIDE CORP.] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: RADIOSHACK WORLDWIDE CORP. Address: AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 FRN: 0034578112 Contact Name: BILLY PORTILLO Telephone No: (503) 2205 3301 Email: [email protected] Signature: Signature:

RADIOSHACK WORLDWIDE CORP. AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: April 13, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BDXE-2606086 RADIOSHACK WORLDWIDE CORP. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: BILLY PORTILLO Title: Purchasing manager Address: AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 Tel.: (503) 2205 3301 Email: [email protected]

RADIOSHACK WORLDWIDE CORP. AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Apr. 13, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BDXE-2606086 Product Name: [Ergonomic 2.4Ghz Mouse] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Applicant Signature Printed Name: BILLY PORTILLO Title: Purchasing manager Address: AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 Tel.: (503) 2205 3301 Email: [email protected] RADIOSHACK WORLDWIDE CORP. AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

RADIOSHACK WORLDWIDE CORP. AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 27, 2025 Subject; Request for Confidentiality FCC ID: 2BDXE-2606086 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: BILLY PORTILLO Title: Purchasing manager

RADIOSHACK WORLDWIDE CORP. AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/P.O Box 0816-01085 Panama 5 April 14, 2026 ) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BDXE-2606086 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (RADIOSHACK WORLDWIDE CORP.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Printed Name: BILLY PORTILLO Title: Purchasing manager Tel.: (503) 2205 3301 Email: [email protected]

Report No.: AGC00806251102AP02 Page 1 of 4 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC00806251102AP02 Page 2 of 4 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC00806251102AP02 Page 3 of 4 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC00806251102AP02 Page 4 of 4 PORT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location FCC ID: 2BDXE-2606086 10mm*10MM

Report No.: AGC00806251102AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC00806251102AP02 Page 2 of 4 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC00806251102AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC00806251102AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 5) BATTERY VIEW OF EUT ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC00806251102FH01 FCC ID : 2BDXE-2606086 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Ergonomic 2.4Ghz Mouse BRAND NAME : N/A MODEL NAME : 2606086 APPLICANT : RADIOSHACK WORLDWIDE CORP. DATE OF ISSUE : Dec. 18, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00806251102FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 18, 2025 Valid Initial Release Report No.: AGC00806251102FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC00806251102FH01 Page 4 of 10 1. General Information Applicant RADIOSHACK WORLDWIDE CORP. Address AFRA building Ave. Samuel Lewis and 54 th Street Panama City Postal BOX/PO Box 0816-01085 Panama 5 Manufacturer Shenzhen Star Sources Electronic Technology Co., Ltd. Address Room 2102, Block 1 st, Yi Luan Building, Xixiang Road 230, BaoAn District, Shenzhen, China Factory Shenzhen Star Sources Electronic Technology Co., Ltd. Address Room 2102, Block 1 st, Yi Luan Building, Xixiang Road 230, BaoAn District, Shenzhen, China Product Designation Ergonomic 2.4Ghz Mouse Brand Name N/A Test Model 2606086 Series Model(s) N/A Difference Description N/A Date of receipt of test item Nov. 28, 2025 Date of Test Nov. 28, 2025 to Dec. 18, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Dec. 18, 2025 Reviewed By Bibo Zhang (Reviewer) Dec. 18, 2025 Approved By Angela Li (Authorized Officer) Dec. 18, 2025 Report No.: AGC00806251102FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) 2.402GHz ~ 2.480GHz Hardware Version 1.0 Software Version 1.0 Maximum Transmitter Power -1.967dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 2.48dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC00806251102FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC00806251102FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.7V by battery or DC 5V by adapter Note: The Extreme Temperature and Extreme Voltages declared by the manufacturer. Report No.: AGC00806251102FH01 Page 8 of 10…

Text truncated - open the document above for the full version.

Page 1 of 51 FCC Test Report Report No.: AGC00806251102FR01 FCC ID : 2BDXE-2606086 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Ergonomic 2.4Ghz Mouse BRAND NAME : N/A MODEL NAME : 2606086 APPLICANT : RADIOSHACK WORLDWIDE CORP. DATE OF ISSUE : Dec. 18, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00806251102FR01 Page 2 of 51 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 18, 2025 Valid Initial Release Report No.: AGC00806251102FR01 Page 3 of 51 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................. 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used In Tested System ........................................................................................................ 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. Duty Cycle Measurement ............................................................................................................................. 16 7. RF Output Power Measurement .................................................................................................................. 17 7.1 Provisions Applicable .............................................................................................................................. 17 7.2 Measurement Procedure ......................................................................................................................... 17 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 7.4 Measurement Result ............................................................................................................................... 18 8. 6dB Bandwidth Measurement ...................................................................................................................... 21 8.1 Provisions Applicable .............................................................................................................................. 21 8.2 Measurement Procedure ......................................................................................................................... 21 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 21 8.4 Measurement Results ............................................................................................................................. 22 9. Power Spectral Density Measurement ........................................................................................................ 26 9.1 Provisions Applicable .............................................................................................................................. 26 9.2 Measure…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2450121-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2024-02-22) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Boyi Innovation Technology Co., Ltd Address: North, 5 / F, Building 3, Tea West, Zone A, Huafeng First Science Park, Hangcheng Street, Baoan District, Shenzhen Equipment Type: BYKC68MS-AK Model Name: BYKC-FRS8X-VER1.2 Brand Name: Boyi scientific and technological innovation Test Standard: IEEE Std 149-2021 Sample Arrival Date: Test Date: Date of Issue: May 08, 2024 May 08, 2024 May 09, 2024 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Xia Long Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2450121-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2024-02-22) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 May 09, 2024 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory ..................................................................................................................... 3 1.2 Test Location ........................................................................................…

Text truncated - open the document above for the full version.