2BDXTPR1512Motion detect Radar module

Pollux Technologies, Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Pollux Technologies, Inc., (Grantee Code: 2BDXT, FRN: 0034579466) certifies that, as of the date of the filing of application, Americas Compliance Consulting LLC dba iCertifi is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address, email for the designated agent are: Physical U.S. address: 2445 NE Division St. Ste 202 Bend, OR 97703 USA Email: [email protected] FRN: 0033399411 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Annie Li Name: Paul Preston Email: [email protected] Email: [email protected] Date: 2024/3/6 Date: 03/15/2024

PolluxTechnologies,Inc. FederalCommunicationsCommission 7435OaklandMillsRoad ColumbiaMD21046 Date:January4,2024 Subject:Certificationsconcerning“covered”equipmentpursuanttoPart2.911(d)(5)(i)and(ii) Towhomitmayconcern, PolluxTechnologies,Inc.certifiesthattheequipmentFCCID:2BDXTPR1512forwhichauthorizationissought isnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. PolluxTechnologies,Inc.certifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnot identifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asanentity producing“covered”equipment. Sincerely, ___________________ Name: AnnieLi E-mail: [email protected]

PolluxTechnologies,Inc. Date:January4,2024 FederalCommunicationsCommission OfficeofEngineeringandTechnologyLaboratoryDivision 7435OaklandMillsRd ColumbiaMD21046-1609 Subject:RequestforConfidentiality FCCID:2BDXTPR1512 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission’srules(47CFR§§0.457, 0.459),wearerequestingtheCommissiontowithholdthefollowingattachment(s)as confidentialdocumentfrompublicdisclosureindefinitely. SchematicDiagram BlockDiagram PartList OperationalDescription Tune-upProcedure Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublicdisclosureof abovedocumentsmightbeharmfultoourcompanyandwouldgivecompetitoranunfair advantageinthemarket. Inadditionaltoabovementioneddocuments,pursuanttoPublicNoticeDA04-1705ofthe Commission’spolicy,inordertocomplywiththemarketingregulationsin47CFT§2.803and theimportationrulesin47CFR§2.1204,whileensuringthatbusinesssensitiveinformation remainsconfidentialuntiltheactualmarketingofnewlyauthorizeddevices.Wearerequesting thecommissiontograntshort-termconfidentialityrequestonthefollowingattachment(s)for 180daysafterthegrantasoutlinedinPublicNoticeDA04-1705. ExternalPhotos InternalPhotos TestSetupPhotos UserManual Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatandcorrespondent duringcertificationreviewprocesscannotbegrantedasconfidentialdocumentsandthose informationwillbeavailableforpublicreviewoncethegrantofequipmentauthorizationisissued. BestRegards, ___________________ Name:AnnieLi E-mail:[email protected]

PolluxTechnologies,Inc. Date:January4,2024 PowerofAttorney Towhomitmayconcern, PleasebenotifiedthatI,AnnieLi,havedesignatedJimTsaiinSportonInternationalInc.asthe personbeingresponsibleforthisprojectandtosigntheform731andotherdocumentation. AnyandallactscarriedoutbyJimTsaiinSportonInternationalInc.,onthemattersofrelatingto allprocessesrequiredintheFCCapprovalandanycommunicationneededwiththenational authority,shallhavethesamelegalauthorityasactsonourownbehalf. Wefurthercertifiesthatneithertheapplicantnoranypartytothisapplication,asdefinedin47CFR Ch.1.2002(b),issubjecttoadenialtoFederalbenefits,thatincludeFCCbenefits,pursuantto section5301oftheAnti-DrugAbuseActof1998,21U.S.C.835(a). Thisauthorizationislimitedtotheproductofasfollowing: FCCID:2BDXTPR1512 Ifyouhaveanyacknowledgementandresponse,pleasesendittoSportonInternationalInc. directly. Shouldyouhaveanyquestionsorcommentsregardingthismatter,pleasehavemybestattention. Sincerelyyours, Name:AnnieLi E-mail:[email protected]

Applicant/GranteePolluxTechnologies,Inc. FCCID:2BDXTPR1512 Section15.212ModularTransmitters RequestforModularApprovalRequestforLimitedModularApproval RequirementsEUTConditionsComply(Y/N) SingleModularApprovalRequirements 1Theradioelementsofthemodular transmittermusthavetheirown shielding.Thephysicalcrystaland tuningcapacitorsmaybelocated externaltotheshieldedradioelements. Theradioportionofthismoduleisnot shielded,pleaseseeexhibitionexternal photos. N 2Themodulartransmittermusthave bufferedmodulation/datainputs(ifsuch inputsareprovided)toensurethatthe modulewillcomplywithPart15 requirementsunderconditionsof excessivedataratesorover-modulation. Themodulehasbuffermodulation/data inputs. Y 3Themodulartransmittermusthaveits ownpowersupplyregulation. Themodulehasitsownpowersupply regulation.Pleaseseetheschem.pdf Y 4Themodulartransmittermustcomply withtheantennaandtransmission systemrequirementsofSections15.203, 15.204(b)and15.204(c).Theantenna musteitherbepermanentlyattachedor employa“unique”antennacoupler(at allconnectionsbetweenthemoduleand theantenna,includingthecable).The “professionalinstallation”provisionof Section15.203isnotapplicableto modulesbutcanapplytolimited modularapprovalsunderparagraph(b) ofthissection. Therequirementsofantennaconnector andspuriousemissionhavebeen fulfilled.PleaserefertotheTestReport exhibition. Y 5Themodulartransmittermustbetested inastand-aloneconfiguration,i.e.,the modulemustnotbeinsideanother deviceduringtestingforcompliance withPart15requirements.Unlessthe transmittermodulewillbebattery powered,itmustcomplywiththeAC lineconductedrequirementsfoundin Section15.207.ACorDCpowerlines anddatainput/outputlinesconnectedto themodulemustnotcontainferrites, unlesstheywillbemarketedwiththe module(seeSection15.27(a)).The lengthoftheselinesshallbethelength typicalofactualuseor,ifthatlengthis unknown,atleast10centimetersto insurethatthereisnocouplingbetween thecaseofthemoduleandsupporting PleaserefertotheSetupPhoto exhibitionforthestand-alonetest configuration. Y equipment.Anyaccessories,peripherals, orsupportequipmentconnectedtothe moduleduringtestingshallbe unmodifiedandcommerciallyavailable (seeSection15.31(i)). 6Themodulartransmittermustbe equippedwitheitherapermanently affixedlabelormustbecapableof electronicallydisplayingitsFCC identificationnumber. (A)Ifusingapermanentlyaffixedlabel,the modulartransmittermustbelabeledwithitsown FCCidentificationnumber,and,iftheFCC identificationnumberisnotvisiblewhenthe moduleisinstalledinsideanotherdevice,then theoutsideofthedeviceintowhichthemoduleis installedmustalsodisplayalabelreferringto theenclosedmodule.Thisexteriorlabelcanuse wordingsuchasthefollowing:“Contains TransmitterModule FCCID:XYZMODEL1”or“ContainsFCCID: XYZMODEL1.”Anysimilarwording thatexpressesthesamemeaningmaybeused. TheGranteemayeitherprovidesuchalabel,an exampleofwhichmustbeincludedinthe applicationforequipment authorization,or,mustprovideadequate instructionsalongwiththemodulewhichexplain thisrequirement.Inthelattercase,acopyof theseinstructionsmustbeincludedinthe applicationforequipmentauthorization. (B)Ifthemodulartransmitterusesanelectronic displayoftheFCCidentificationnumber,the informationmustbereadilyaccessibleand visibleonthemodulartransmitteroronthe deviceinwhichitisinstalled.Ifthemoduleis installedinsideanotherdevice,thentheoutside ofthedeviceintowhichthemoduleisinstalled mustdisplayalabelreferringtotheenclosed module.Thisexteriorlabelcanusewordingsuch asthefollowing: “ContainsFCCcertifiedtransmittermodule(s).” Anysimilarwordingthatexpressesthesame meaningmaybeused.Theusermanualmust includeinstructionsonhowtoaccessthe electronicdisplay.Acopyoftheseinstructions mustbeincludedintheapplicationfor equipmentauthorization. TheModulewillbelabeledwithitsown FCCID,andtheinstructiononthe labelingruleoftheendproducthasbeen statedintheUserManualofthis module.PleaserefertotheLabeland UserManualexhibition. Y 7Themodulartransmittermustcomply withanyspecificrulesoroperating requirementsthat ordinarilyapplytoacomplete transmitterandthemanufacturermust provideadequateinstructionsalongwith themoduletoexplainanysuch requirements.Acopyofthese instructionsmustbeincludedinthe applicationforequipmentauthorization. TherequiredFCCrulehasbeenfulfilled andalltheinstructionsformaintaining compliancehavebeenclearlystatedin theUserManual. Y 8Themodulartransmittermustcomply withanyapplicableRFexposure requirementsinitsfinalconfiguration. PleasereferexhibitionRFExposurefor thecomplianceofMPERFexposure rule. Y _________________________________ Name:AnnieLi E-mail:[email protected]

Sporton International Inc. (Shenzhen) Page Number : 1 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 RF Exposure Evaluation Report APPLICANT : Pollux technologies, Inc EQUIPMENT : Motion detect Radar module BRAND NAME : Pollux MODEL NAME : PR1512 FCC ID : 2BDXTPR1512 STANDARD : 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 The product evaluation date was started from Jan. 08, 2024 and completed on Jan. 08, 2024. We, Sporton International Inc. (Shenzhen), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Shenzhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (Shenzhen) Page Number : 2 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Standalone Power Density Calculation ............................................................................................. 8 Sporton International Inc. (Shenzhen) Page Number : 3 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA3D0106 Rev. 01 Initial issue of report. Jan. 11, 2024 Sporton International Inc. (Shenzhen) Page Number : 4 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Shenzhen) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Testing Laboratory Test Firm Sporton International Inc. (Shenzhen) Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-SZ CN1256 421272 Applicant Company Name Pollux technologies，Inc Address Unit06,16F，ZhuhaiTower，No.1663,YinWan Road,Wanzai,XiangZhou Disttric,Zhuhai,China Manufacturer Company Name Haoweida technologies，Inc Address 301, Unit 1, Building 2, No.1 Keji 7th Road, Tangjiawan Town, High tech Zone, Zhuhai City Sporton International Inc. (Shenzhen) Page Number : 5 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Motion detect Radar module Brand Name Pollux Model Name PR1512 FCC ID 2BDXTPR1512 Wireless Technology and Frequency Range Radar: 5785 MHz ~ 5815 MHz Mode CW Antenna Gain 4.00 dBi Antenna Type Patch Antenna HW Version PR1512 R2D SW Version PR1512_CE_V1.0.2.725F_20231130 EUT Stage Production Unit Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Comments and Explanations: 1. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 2. The maximum RF output tune up power, antenna gain also the safe distance used for evaluate RF exposure were declared by manufacturer. Sporton International Inc. (Shenzhen) Page Number : 6 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 3. Maximum RF average output tune up power among production units < Radar > Mode Maximum Average Power (dBm) Radar 5.8GHz 2.5 Sporton International Inc. (Shenzhen) Page Number : 7 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Jan. 11, 2024 FCC ID : 2BDXTPR1512 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA3D0106 4. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: = Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna Sporton International Inc. (Shenzhen) Page Number : 8 of 8 TEL : 86-755-86379589 / FAX : 86-…

Text truncated - open the document above for the full version.

Sporton International Inc. (ShenZhen) Page Number : 1 of 16 TEL : +86-755-8637-9589 Report Issued Date : Jan. 11, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2BDXTPR1512 Report Template No.: BU5-FR15.245 Version 1.0 FCC RF Test Report Report No. : FR3D0106 FCC RF Test Report APPLICANT : Pollux technologies, Inc EQUIPMENT : Motion detect Radar module BRAND NAME : Pollux MODEL NAME : PR1512 FCC ID : 2BDXTPR1512 STANDARD : FCC Part 15 Subpart C §15.245 CLASSIFICATION : (FDS) Part 15 Field Disturbance Sensor TEST DATE(S) : Dec. 26, 2023 ~ Jan. 04, 2024 We, Sporton International Inc. (ShenZhen), would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (ShenZhen), the test report shall not be reproduced except in full. Approved by: Jason Jia Sporton International Inc. (ShenZhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (ShenZhen) Page Number : 2 of 16 TEL : +86-755-8637-9589 Report Issued Date : Jan. 11, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2BDXTPR1512 Report Template No.: BU5-FR15.245 Version 1.0 FCC RF Test Report Report No. : FR3D0106 TABLE OF CONTENTS SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 5 1.5 Modification of EUT ........................................................................................................................... 5 1.6 Testing Location ................................................................................................................................ 6 1.7 Test Software ..................................................................................................................................... 6 1.8 Applicable Standards ......................................................................................................................... 6 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 7 2.1 Descriptions of Test Mode ................................................................................................................. 7 2.2 Test Mode .......................................................................................................................................... 7 2.3 Test Configurations............................................................................................................................ 8 2.4 Support Unit used in test configuration and system .......................................................................... 8 2.5 EUT Operation Test Setup ................................................................................................................ 8 3 TEST RESULT ............................................................................................................................................ 9 3.1 20dB and & 99% Occupied Bandwidth.............................................................................................. 9 3.2 Field Strength of Fundamental Emissions and Radiated Spurious Emissions ............................... 10 3.3 Antenna Requirements .................................................................................................................... 14 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 15 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 16 APPENDIX A. TEST RESULTS OF RADIATED SPURIOUS EMISSIONS APPENDIX B. SETUP PHOTOGRAPHS Sporton International Inc. (ShenZhen) Page Number : 3 of 16 TEL : +86-755-8637-9589 Report Issued Date : Jan. 11, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2BDXTPR1512 Report Template No.: BU5-FR15.245 Version 1.0 FCC RF Test Report Report No. : FR3D0106 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR3D0106 Rev. 01 Initial issue of report Jan. 11, 2024 Sporton International Inc. (ShenZhen) Page Number : 4 of 16 TEL : +86-755-8637-9589 Report Issued Date : Jan. 11, 2024 FAX : +86-755-8637-9595 Report Version : Rev. 01 FCC ID: 2BDXTPR1512 Report Template No.: BU5-FR15.245 Version 1.0 FCC RF Test Report Report No. : FR3D0106 SUMMARY OF TEST RESULT Part FCC Rule Description of Test Result Remark - 15.207 AC Power Line Conducted Emissions Not Applicable Battery powered only 3.1 15.215(c) 20dB & 99% Occupied Bandwidth Complies - 3.2 15.245(b) Field Strength of Fundamental Emissions Complies Max level 98.01 dBμV/m at 5800.71 MHz 3.2 15.245 &15.209 &15.205 Radiated Spurious Emissions Complies Under limit 1.42 dB at 11577.10 MHz 3.3 15.203 Antenna Requirements Complies - Remark: Not Applicable means after assessing, test items are not necessary to carry out. Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty ex…

Text truncated - open the document above for the full version.

PR1512 Antenna Spec Manufacturer：Huizhou Yonglong Circuit Co., Ltd Address： Changlong Village, Zhenlong Town, Huiyang District, Huizhou City Model Name：PR1512 Type：Patch Antenna Size：11.4mm*11.4mm