2BDYR-ZS200Wireless Speaker

• Press the Bluetooth button to enter the Bluetooth pairing mode. • Select“NOBIS CLIP N1”on your device’s Bluetooth device list to connect. Multiple Bluetooth Connection: This speaker can pair up to 6 mobile devices via Bluetooth. To pair with another device, press the Bluetooth button to re-enter Bluetooth pairing mode. This speaker can only play music on one mobile device at a time. To play from another connected device, pause the currently active device first. Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode. 1. When the speaker is plugged in to a charging source with the USB-C charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. 2. Read and follow all instructions – All operating and use instructions should be followed. 3. Protect the USB-C charging cable from being pinched, particularly at the connectors. 4. Unplug the USB-C charging cable during lightning storms or when unused for long periods of time. 5. Do not place speaker near any heat sources such as radiators, heat registers, stoves,or other apparatus (including amplifiers) that produce heat. 6. Refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way. 7. Do not make alterations to this speaker. 8. The battery in the speaker is not replaceable. Do not attempt to change it. 9. Use this speaker only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC) in accordance with the manufacturer’s specifications. 10. Do not place near naked flame sources, such as lighted candles, on or near the speaker. 11. Do not expose this speaker to excessive heat (e.g. from storage in direct sunlight, fire or the like) 12. If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice. Beat Function On/ Off and Beat sounds switching • Press the beat button repeatedly to switch between different beat sounds or turn off beat function. • When beat function is on, touch the beat touch key to play the corresponding sound. • When music is playing, the beat sound will be mixed with the music. When no music is playing, the beat sound will be played alone. • More beat sounds in Nobis GO app. Beat modes switching • When beat function is on, press and hold down the Beat button for 1 second to switch between different beat modes. • The different beat modes cover commonly used music beats such as 2/4, 3/4, 4/4, 3/8, 6/8, and so on. • The recommended beat modes are as follows. Stereo link function: On • Make sure both speakers are powered on. • Make sure one speaker is connected to your mobile device. • On the speaker connected to your device, press and hold down the Bluetooth button for 2 seconds. • On the other speaker, press and hold down the Bluetooth button for 2 seconds. • Once the stereo link function is on, you'll hear “stereo connected” from both speakers. You are now able to play music using your mobile device. Notes: • The speakers need to be in the same room or outdoor area. • Keep the speakers within 10 feet of each other and free from obstructions. • Powering off any speaker will power off all the speakers. • The volume control on any speaker will control all the speakers. • When the stereo link function is on, the beat function is automatically blocked and cannot be used. Stereo link function: Off • Make sure both speakers are powered on. • Press and hold down the Bluetooth button for 2 seconds on both speakers. Establish a new stereo link • If the speaker has been previously paired in stereo link function and you want to connect it to a different speaker for stereo link, you must first break the existing stereo link by pressing and holding down the Bluetooth button for 2 seconds. • After that, please refer to the "Stereo Link Function: On" section to pair with the new speaker. With the stereo function, you can pair your Nobis CLIP N1 with another Nobis CLIP N1. Two speakers can play together in stereo mode. Notes: • These are just suggestions. • Feel free to experiment and find the best mode for your music. • The beat modes are designed to work with most common musical time signatures, but they may not cover all of them. Beat sound volume control • Refer to the section "Controls" for the beat sound volume control. This speaker does not support answering calls; When playing music and receiving a call, the speaker will automatically mute and switch to answering the call with your phone. After answering the call, the music will resume playing. NOBIS CLIP N1 Wireless Speaker User Manual Model No. : N6301 英 Customer Service For FAQS and more information: Please send an email to：[email protected] www.nobisound.com Fully dry off the USB port before charging. NOBIS GO APP 1. Charging Specifications Packing List USB-C Charging Cable * 1 At a Glance Using Your Wireless Speaker Output power- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5W RMS Frequency response- - - - - - - - - - - - - - - - - - - - - - - - 90Hz-20KHz Signal-to-noise ratio- - - - - - - - - - - - - - - - - - - - - - - - - - - >90dB Battery- - - - - - - - - - - - - - - - - - - - - - - - - - - -Lithium-ion 6.66Wh Battery charge time- - - - - - - - - - - - - - - - - - - - - -3.5 hours(5V/1A) Music playtime- - - - - - - - - - - - - - - - - - - - - -up to 24 hours(varies by volume level and audio content) Bluetooth version- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5.3 IP Rating- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -IP68 Dimensions(WxHxD)- - - - - - - - - - - - - - - - - - - - 80.4x52.5x138mm Weight- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 250.7g NOBIS CLIP N1 * 1User Manual* 1 Accessories Power cord, connecting cable Nam…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Shenzhen Zowee Smart Manufacturing Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 27‐05‐2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BDYR‐ZS200 [Shenzhen Zowee Smart Manufacturing Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Feiming Li Rev 1/26/2023 Shenzhen Zowee Smart Manufacturing Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 27‐05‐2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BDYR‐ZS200 [Shenzhen Zowee Smart Manufacturing Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Feiming Li

[Shenzhe [NO.1 fac Commun Date: [20 Federal C Authoriza 7435 Oa Columbi a FCC ID: Applican US [Shenzhe designate ZS200]. [Shenzh e process i terminate conclusio equipmen FCC US the desi g Zowee S Designat Company FRN: 003 Address: Contact P Phone: 7 Email: Su Sincerely Company Manufact Company Signature en Zowee S ctory buildin nity, Yanluo 024-6-18] Communicat ation and Ev kland Mills R a, MD 21046 [2BDYR-ZS t FRN: [0034 S Agen en Zowee S ed FCC US A en Zowee S in the United ed all market on of any Co nt, whicheve Agent, LLC, gnated agent Smart Manufa ted Agent In y Name: FCC 33402884 3722 Illinoi s Person: Tim 708-571-3148 upport@FCC y, y: [Shenzhen turing Co., L y Represent e: mart Manufa g ,NO.3 fact Street, Bao’ tions Comm valuation Div Road 6 S200] 4583674] t – Atte mart Manufa Agent, LLC t mart Manufa d States for n ting and imp ommission-re er is later. accepts as t for the purp acturing Co. nformation: C US Agent, s Avenue, Sa Payne 8 CUSAgent.co n Zowee Sm Ltd.] ative: [Feimi acturing Co. tory building ’an District mission vision station acturing Co. to accept se acturing Co. no less than ortation of t h elated admin of the date o pose of acce ., Ltd.] for FC : , LLC aint Charles, om mart ng Li] ] , Ltd.] g, No.149,Se t, Shenzhen] Statem , Ltd.] certifie rvice of proc , Ltd.], accep one year aft he applicable nistrative or ju of the filing o pting service CC ID: [2BDY , IL, 60174, U Designat Designat Signature econd Indust ] ment / Pa es, that as o cess on our b pts to mainta ter either the e equipment udicial proce of this applica e of process YR-ZS200]. USA ted Agent: F ted Agent Re e: trial Road, T art 2.91 f [2024-6-18 behalf for FC ain an agent grantee ha s within the U eeding involv ation, the ob on behalf o f CC US Age n epresentativ Tangxiachon 1(d)(7) 8], we have CC ID: [2BDY of service o s permanent U.S., or the ving the ligation of b e f [Shenzhen nt, LLC e: Tim Payn g YR- of tly eing e

Shenzhen Zowee Smart Manufacturing Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-05-27 SUBJECT: FCC Application for FCC ID: 2BDYR-ZS200 To Whom It May Concern: We, the undersigned, hereby authorize Lisa Wang at EMTEK (SHENZHEN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (SHENZHEN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Feiming Li Shenzhen Zowee Smart Manufacturing Co., Ltd.

Rev 11/20/07 Shenzhen Zowee Smart Manufacturing Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BDYR-ZS200 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram, Schematics, Operational Description, Block Diagram Operation Description schematic diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Feiming Li Shenzhen Zowee Smart Manufacturing Co., Ltd.

Shenzhen Zowee Smart Manufacturing Co., Ltd. Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only differences are the model name and the color of appearance for trading purpose. FCC ID: 2BDYR-ZS200 Production name Trade name Model no. Wireless Speaker zowee N6301,N6311,N6302,N6303,N6304,N6305,N6306,N630 7,N6308,N6309,N6310,J6301,J6302,J6303,J6304,J6305 ,J6306,J6307,J6308,J6309,J6310,N6312,N6313,N6314, N6315,N6316,N6317,N6318,N6319,N6320,J6311,J6312 ,J6313,J6314,J6315,J6316,J6317,J6318,J6319,J6320 Confirmed by Shenzhen Zowee Smart Manufacturing Co., Ltd. Feiming Li Shenzhen Zowee Smart Manufacturing Co., Ltd. Date: 2024-05-27

Shenzhen Zowee Smart Manufacturing Co., Ltd. Date: 2024-05-27 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BDYR-ZS200 To Whom It May Concern: This letter is to ascertain that Shenzhen Zowee Smart Manufacturing Co., Ltd. EUT：Wireless Speaker MODEL No.: N6301,N6311,N6302,N6303,N6304,N6305,N6306,N6307,N6308,N6309,N6310,J6301,J63 02,J6303,J6304,J6305,J6306,J6307,J6308,J6309,J6310,N6312,N6313,N6314, N6315,N6316,N6317,N6318,N6319,N6320,J6311,J6312,J6313,J6314,J6315,J6316,J6317 ,J6318,J6319,J6320 Has been the units used for conducting FCC compliance testing, the SDoC part will be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature ： Client’s name / title ： Feiming Li Contact information / address: Shenzhen Zowee Smart Manufacturing Co., Ltd. /NO.1 factory building ,NO.3 factory building, No.149,Second Industrial Road, Tangxiachong Community, Yanluo Street, Bao’an District, Shenzhen

EUT EXTERNAL PHOTOGRAPHS ----------------The end----------------

Label location

EUT INTERNAL PHOTOGRAPHS Antenna RF MODULE

----------------The end----------------

----------------The end----------------

FCC ID : 2BDYR-ZS200  Test Standards and Limits 1. According to KDB 447498 D01 v06, Section 4.3.1 2. FCC Radiofrequency radiation exposure limits: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel)/(min test separation distance)]*[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. For 2.4G band device, the limit of worse case is P max ≤3.0*D min )/ f =3.0*5/ 2.480 =9.525mW  Measurement and Calculation 1. Maximum transmit power Antenna Gain: 2.50 dBi TestMode Antenna Frequency[MHz] Conducted Peak Powert[dBm] BLE_1M Ant1 2402 0.00 2440 2.09 2480 3.47 BLE_2M Ant1 2402 0.07 2440 2.08 2480 3.56 Test Mode Antenna Frequency[MHz] Conducted Peak Powert[dBm] DH5 Ant1 2402 0.57 2441 2.89 2480 3.78 2DH5 Ant1 2402 1.15 2441 3.17 2480 4.14 3DH5 Ant1 2402 1.36 2441 3.34 2480 4.29 2. MPE Calculation The Max Conducted Peak Output Power is 4.29 dBm. The Max Antenna Gain is 2.50 dBi. According to the formula. calculate the EIRP test result: EIRP= P x G = 2.69 mW x 1.78 = 4.79mW < 9.525mW So the SAR report is not required. -End of the Report-

Report No. ENS2403290275W00501R Page 1 of 51 Ver.1.0 TEST REPORT Product Name ： Wireless Speaker Model Number ： See Page 4 for details FCC ID ： 2BDYR-ZS200 Prepared for : Shenzhen Zowee Smart Manufacturing Co., Ltd. Address : NO.1 factory building ,NO.3 factory building, No.149,Second Industrial Road, Tangxiachong Community, Yanluo Street, Bao’an District, Shenzhen Prepared by : EMTEK (SHENZHEN) CO., LTD. Address : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number : ENS2403290275W00501R Date(s) of Tests : March 30, 2024 to May 7, 2024 Date of issue : May 9, 2024 $二维码$ Report No. ENS2403290275W00501R Page 2 of 51 Ver.1.0 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ........................................................................................................... 3 2 EUT TECHNICAL DESCRIPTION .......................................................................................................... 5 3 SUMMARY OF TEST RESULT ............................................................................................................... 6 4 TEST METHODOLOGY.......................................................................................................................... 7 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS .................................................................. 7 4.2 MEASUREMENT EQUIPMENT USED ............................................................................................. 7 4.3 DESCRIPTION OF TEST MODES ................................................................................................... 8 5 FACILITIES AND ACCREDITATIONS .................................................................................................... 9 5.1 FACILITIES ....................................................................................................................................... 9 5.2 LABORATORY ACCREDITATIONS AND LISTINGS ........................................................................ 9 6 TEST SYSTEM UNCERTAINTY ........................................................................................................... 10 7 SETUP OF EQUIPMENT UNDER TEST .............................................................................................. 11 7.1 RADIO FREQUENCY TEST SETUP 1 ........................................................................................... 11 7.2 RADIO FREQUENCY TEST SETUP 2 ........................................................................................... 11 7.3 CONDUCTED EMISSION TEST SETUP ....................................................................................... 13 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ........................................................... 14 7.5 SUPPORT EQUIPMENT ................................................................................................................ 14 8 TEST REQUIREMENTS ....................................................................................................................... 15 8.1 DTS 6DB BANDWIDTH .................................................................................................................. 15 8.2 MAXIMUM PEAK CONDUCTED OUTPUT POWER ...................................................................... 18 8.3 MAXIMUM POWER SPECTRAL DENSITY .................................................................................... 21 8.4 UNWANTED EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS .................................... 24 8.5 RADIATED SPURIOUS EMISSION ................................................................................................ 34 8.6 CONDUCTED EMISSIONS TEST .................................................................................................. 47 8.7 ANTENNA APPLICATION ............................................................................................................... 50 Report No. ENS2403290275W00501R Page 3 of 51 Ver.1.0 1 TEST RESULT CERTIFICATION Applicant : Shenzhen Zowee Smart Manufacturing Co., Ltd. Address : NO.1 factory building ,NO.3 factory building, No.149,Second Industrial Road, Tangxiachong Community, Yanluo Street, Bao’an District, Shenzhen Manufacturer : Shenzhen Zowee Smart Manufacturing Co., Ltd. Address : NO.1 factory building ,NO.3 factory building, No.149,Second Industrial Road, Tangxiachong Community, Yanluo Street, Bao’an District, Shenzhen EUT : Wireless Speaker Model Name : See Page 4 for details Trademark : zowee Measurement Procedure Used: APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 2 , Subpart J FCC 47 CFR Part 15, Subpart C PASS The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part 15.247 The test results of this report relate only to the tested sample identified in this report Date of Test : March 30, 2024 to May 7, 2024 Prepared by : Una Yu/Editor Reviewer : Joe Xia/Supervisor Approved & Authorized Signer : Lisa Wang/Manager Report No. ENS2403290275W00501R Page 4 of 51 Ver.1.0 Modified Information Version Report No. Revision Date Summary Ver.1.0 ENS2403290275W00501R / Original Report Declaration on model Production name Trade mark Model no. Wireless Speaker zowee N6301,N6311,N6302,N6303,N6304,N6305,N6306,N6307, N6308,N6309,N6310,J6301,J6302,J6303,J6304,J6305,J 6306,J6307,J6308,J6309,J6310,N6312,N6313,N6314, N6315,N6316,N6317,N6318,N6319,N6320,J6311,J6312,J 6313,J6314,J6315,J6316,J6317,J6318,J6319,J6320 Note: n/a. Report No. ENS2403290275W00501R Page 5 of 51 Ver.1.0 EUT TECHNICAL DESCRIPTION Product Wireless Speaker Model Number See Page 4 for details Device Type BLE V5.4 Data Rate : 1Mbps 2Mb…

Text truncated - open the document above for the full version.

2.4G-2.48GfrequencybandOnthepcbboardPIFA Antennatestreport SPECIFICATIONS Frequency（MHz）2400-2480 PeakGain（dBi）2.499 AverageGain（dBi）＞-4 VSWR＜3.2 Impedance（Ω）50Ω AntennaTypePlannarInvertedFAntennaonboard PolarizationLinear testingenvironment ： ChinaScienceandtechnologydarkroomtestsystem Z X Y Antennaphysicalandphysicaldimensions AntennapassivitySparameter： VSWR 、 ReturnLossandsmithchart Antennaefficiencyandgain Frequency（MHz）Gain（dBi）Effciency（%）AverageGain（dBi）Efficiency（dB） 24001.43359.329%-2.717-2.267 24100.92751.861%-3.416-2.852 24200.82952.112%-3.166-2.831 24300.88149.299%-3.258-3.072 24401.19250.672%-3.144-2.952 24501.68853.067%-2.735-2.752 24602.19459.423%-2.276-2.260 24702.11856.680%-2.438-2.466 24802.49961.727%-2.112-2.095 Average1.52954.908%-2.806-2.616 Peak2.49961.727%-2.112-2.095 RF2440MHz2D-ThetaPattern RF2440MHz2D-PhiPattern RF2440MHz3D-HorizontalPattern RF2440MHz3D-VerticalPattern 2440MHz3D-TotalPattern

2.4G-2.48GfrequencybandOnthepcbboardPIFA Antennatestrepor SPECIFICATIONS Frequency（MHz）2400-2480 PeakGain（dBi）2.499 AverageGain（dBi）＞-4 VSWR＜3.2 Impedance（Ω）50Ω AntennaTypePlannarInvertedFAntennaonboard PolarizationLinear testingenvironment ： ChinaScienceandtechnologydarkroomtestsystem Z X Y Antennaphysicalandphysicaldimensions AntennapassivitySparameter： VSWR、ReturnLossandsmithchart Antennaefficiencyandgain Frequency（MHz）Gain（dBi）Effciency（%）AverageGain（dBi）Efficiency（dB） 24001.43359.329%-2.717-2.267 24100.92751.861%-3.416-2.852 24200.82952.112%-3.166-2.831 24300.88149.299%-3.258-3.072 24401.19250.672%-3.144-2.952 24501.68853.067%-2.735-2.752 24602.19459.423%-2.276-2.260 24702.11856.680%-2.438-2.466 24802.49961.727%-2.112-2.095 Average1.52954.908%-2.806-2.616 Peak2.49961.727%-2.112-2.095 RF2440MHz2D-ThetaPattern RF2440MHz2D-PhiPattern RF2440MHz3D-HorizontalPattern RF2440MHz3D-VerticalPattern 2440MHz3D-TotalPattern

TEST SETUP PHOTOGRAPHS 1.1. Photos of Conducted Emission Measurement 1.2. Photos of Radiation Emission Measurement Spurious Emission Test Setup (Below 1GHz) Spurious Emission Test Setup (Above 1GHz) ----------------The end----------------