2BE22-LEDB7S7 Bedside Terminal+ Button

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Electronic Mac, Inc. FRN: 0033414541 Contact Name:Ray Sia Address: 6525 Crown Blvd, # 20805, San Jose, CA 95120 Telephone No: 408-332-2399 Email: [email protected] Applicant: Company name: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Product Description: 7" Bedside Terminal+ Button Grantee code: 2BE22 FCC ID: 2BE22-LEDB7S FRN：0034953661 Contact Name: Wenxia Liu Address:Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Telephone No: 18672678278 Email: [email protected] [DONGGUAN Shine Well Intelligent Equipment Co.,Ltd] certifies that, as of the date of this filing of the application with the TCB, [Electronic Mac, Inc.] is our designated US agent for service of process for the above referenced FCC ID. [DONGGUAN Shine Well Intelligent Equipment Co.,Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Electronic Mac, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2024/3/05 Applicant’s Name: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd US Agent’s Name: Electronic Mac, Inc. Title: Manager Title: General Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Grantee code: 2BE22 FCC ID: 2BE22-LEDB7S Contact Name: Wenxia Liu Address: Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Telephone No: 18672678278 Fax No: / Email: [email protected] i. [DONGGUAN Shine Well Intelligent Equipment Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [DONGGUAN Shine Well Intelligent Equipment Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [DONGGUAN Shine Well Intelligent Equipment Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/02/29 Applicant’s Name: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Product Similarity Declaration Product name: 7" Bedside Terminal+ Button Model name: LED-B7S,LED-B7S-CNW,LED-B7S-C,LED-B7S-CN,LED- B7S-CW,LED-B7S-NW,LED-B7S-N,LED-B7S-W We (DONGGUAN Shine Well Intelligent Equipment Co.,Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model names. The purpose of naming different names is to distinguish between different sales channels and regions. Signature: Name: Wenxia Liu Title: Manager Date: 2024.3.05

C5266091_X8_Ed.1 1/1 Letter of Authorization DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Company: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Address: Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Product Name: 7" Bedside Terminal+ Button Model Number: LED-B7S,LED-B7S-CNW,LED-B7S-C,LED-B7S-CN,LED-B7S- CW,LED-B7S-NW,LED-B7S-N,LED-B7S-W FCC Identifier: 2BE22-LEDB7S We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wenxia Liu Date: 2024.2.29 Title: Manager Signature of applicant:

Doc#:F_731 (Rev1.0) - C5266091_X7_ Ed.2 1/3 APPLICATION FOR FCC EQUIPMENT AUTHORIZATION (Form 731) Section: One Applicant’s Business Name DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Applicant’s FRN 0034953661 Model Number LED-B7S,LED-B7S-CNW,LED-B7S-C,LED-B7S- CN,LED-B7S-CW,LED-B7S-NW,LED-B7S-N,LED-B7S-W Request for Grantee Code FCC ID: (Grantee + Applicant Code) 2BE22-LEDB7S Address line 1 Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Address line 2 City Dongguan Zip/ Postal Code State P.O. Box Country China Phone 18672678278 First Name Wenxia Fax Middle Name Email [email protected] Last Name Liu Mail Stop Title Manager Section: Two Instead of Applicant, the original Grant is authorized to be mailed to (All questions regarding the application will be directed to this contact. The original grant and invoice will be sent to this contact.) Technical Contact Company Name DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Address Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province City Dongguan Zip/ Postal Code State P.O. Box Country China Phone 18672678278 Contact Person Wenxia Liu Fax Title Manager Email [email protected] Non - Technical Contact Company Name Address City Zip/ Postal Code State P.O. Box Country Phone Contact Person Fax Title Email Section: Three Does this application include a request for Long Term Confidentiality (LTC)? [see 47 CFR § 0.459] Yes No Does this application include a request for Short Term Confidentiality (STC)? Date? (mm/dd/yyyy) __________________________________ Yes No Is this application for Software Defined Radio (SDR) authorization? Yes No Is there a PAG associated with this Application? Please specify KDB number: ____________ Yes No Does the applicant request a deferred Grant Date? (mm/dd/yyyy) ________________________ Yes No Is this a Modular or Limited Modular Certification? Is there a waiver associated with this filing? No Yes Modular Type: ( if you answered “Yes“) Yes No Doc#:F_731 (Rev1.0) - C5266091_X7_ Ed.2 2/3 Single Modular Approval Limited Single Modular Approval Split Modular Approval Split Limited Modular Approval Waiver Number: ______ Waiver Date: ______ Description of product as it is marketed (note: this text will appear below the equipment class on the grant) 7" Bedside Terminal+ Button Purpose of the Application: Original equipment Change in identification of presently authorized equipment: Original FCC ID:____________________________ Original Grant Date (MM/DD/YYYY):________________________ Class II permissive change or modification of presently authorized equipment Class III permissive change to software defined radio ( Note: this may only be filed for applications pertaining to Software Defined Radio) Equipment Specifications The equipment will be operated under FCC Rule Part(s) Frequency range in MHz Rated RF power output (Watts) Frequency tolerance (%, Hz, ppm) Emission Designator (NOT for Part 15 devices) FCC Equipment Code (ex:: DTS, DSS, PCE) 2402 2480 0.00131 DTS 2412 2462 0.01610 DTS 13.56 13.56 DXX NOTE: If additional Equipment Specifications required, please use separate page Is the equipment in this application? (a) a composite device subject to an additional equipment authorization? Yes No (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? Yes No If either of the above questions is answered “Yes” please complete the following statement (c) The related application checked above is (Check one box only) has been granted under the FCC ID listed to the right is in the process of being filed under the FCC ID listed to the right is pending with the FCC under the FCC ID listed to the right FCC ID: 2BE22-LEDB7S 15.247,15.225 Doc#:F_731 (Rev1.0) - C5266091_X7_ Ed.2 3/3 Section: Four Name of Test Firm and contact person on file with the FCC, if different from applicant or contact person Company name Shenzhen ETR Standard Technology Co., Ltd. Address No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China City / Zip Postal Code State / P.O. Box Country / Phone +86 755 85259392 Contact Person Smith chen Fax Email [email protected] FCC Registered Test Site Number (required for part 15 and 18 applications) Read each certification carefully before answering and signing this application WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503). SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION: The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a “party” for these purposes Does the applicant or authorized agent so certify? Yes No APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization issued by Applus Laboratories as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production un…

Text truncated - open the document above for the full version.

Label size: 40*30mm location

FCC ID: 2BE22-LEDB7S RF Exposure Evaluation Limits According to 447498 D01 General RF Exposure Guidance v06 The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: 2BE22-LEDB7S Test Result of RF Exposure Evaluation The source of the evaluation data results is based on the test report ET-24020095E01/02/03 2.4G WIFI Antenna gain=2.43dBi FOR BLE Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK 1.18 1.31 1.75 0.00046 1.0 PASS FOR 2.4GWIFI Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 12.06 16.07 1.75 0.0056 1.0 PASS 802.11g 10.82 12.08 1.75 0.0042 1.0 PASS 802.11n20 10.15 10.35 1.75 0.0036 1.0 PASS 802.11n40 9.57 9.06 1.75 0.0032 1.0 PASS FOR NFC Mode Output power (dBuV/m) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result ASK 62.90 0.0006 1 0.0000001 0.98 PASS dBm=E(dBuV/m)-95.2=62.9-95.2=-32.3dBm Note: Bluetooth and WiFi cannot work simultaneously Maximum power density=0.0056 <1.Then SAR evaluation is not require .

Report No.: ET-24020095E01 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd. TEST REPORT Applicant: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Address of Applicant: Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Manufacturer/Factory: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Address of Manufacturer Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Product Name: 7" Bedside Terminal+ Button Model No.: LED-B7S,LED-B7S-CNW,LED-B7S-C,LED-B7S-CN,LED-B7S- CW,LED-B7S-NW,LED-B7S-N,LED-B7S-W Trade Mark: N/A FCC ID: 2BE22-LEDB7S Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Test: Feb.02, 2024- Feb.20, 2024 Date of report issued: Mar.06, 2024 Test Result : PASS * Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 30 - Report No.: ET-24020095E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-24020095E01 Original Mar.06, 2024 - Page 3 of 30 - Report No.: ET-24020095E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1. TEST SUMMARY ......................................................................................................................................4 2. GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT .................................................................................................................5 2.2 TEST MODE ................................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................7 2.4 DEVIATION FROM STANDARDS .....................................................................................................................7 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 2.6 TEST FACILITY ............................................................................................................................................7 2.7 TEST LOCATION ..........................................................................................................................................7 2.8 ADDITIONAL INSTRUCTIONS .........................................................................................................................7 3. TEST INSTRUMENTS LIST ......................................................................................................................8 4. TEST RESULTS AND MEASUREMENT DATA .......................................................................................9 4.1 ANTENNA REQUIREMENT .............................................................................................................................9 4.2 CONDUCTED EMISSIONS ...........................................................................................................................10 4.3 DUTY CYCLE .............................................................................................................................................11 4.4 CONDUCTED OUTPUT POWER ...................................................................................................................13 4.5 6DB BANDWIDTH ......................................................................................................................................14 4.6 POWER SPECTRAL DENSITY ......................................................................................................................16 4.7 BAND EDGES ............................................................................................................................................18 Conducted Emission Method ...................................................................................................................18 Radiated Emission Method ......................................................................................................................19 4.8 SPURIOUS EMISSION .................................................................................................................................21 Conducted Emission Method ...................................................................................................................21 Radiated Emission Method ......................................................................................................................23 5. TEST SETUP PHOTO .............................................................................................................................30 6. EUT CONSTRUCTIONAL DETAILS .......................................................................................…

Text truncated - open the document above for the full version.

Report No.: ET-24020095E02 Tel: +86 755 85259392 Email: [email protected] No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China TEST REPORT Applicant: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Address of Applicant: Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Manufacturer/Factory: DONGGUAN Shine Well Intelligent Equipment Co.,Ltd Address of Manufacturer Room 301, No. 393, Chang 'an Section, Tai 'an Road, Chang 'an Town, Dongguan City, Guangdong Province Product Name: 7" Bedside Terminal+ Button Model No.: LED-B7S,LED-B7S-CNW,LED-B7S-C,LED-B7S-CN,LED-B7S- CW,LED-B7S-NW,LED-B7S-N,LED-B7S-W Trade Mark: N/A FCC ID: 2BE22-LEDB7S Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Test: Feb.02, 2024- Feb.20, 2024 Date of report issued: Mar.06, 2024 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Remark: The results shown in this test report refer only to the sample(s) tested , this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 51 - Report No.: ET-24020095E02 Report Revision History Report No. Description Issue Date ET-24020095E02 Original Mar.06, 2024 - Page 3 of 51 - Report No.: ET-24020095E02 Tel: +86 755 85259392 Email: [email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1. TEST SUMMARY ......................................................................................................................................4 2. GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT .................................................................................................................5 2.2 TEST MODE ................................................................................................................................................6 2.3 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................6 2.4 DEVIATION FROM STANDARDS .....................................................................................................................6 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................6 2.6 TEST FACILITY ............................................................................................................................................6 2.7 TEST LOCATION ..........................................................................................................................................6 2.8 ADDITIONAL INSTRUCTIONS .........................................................................................................................6 3. TEST INSTRUMENTS LIST ......................................................................................................................7 4. TEST RESULTS AND MEASUREMENT DATA .......................................................................................8 4.1 ANTENNA REQUIREMENT .............................................................................................................................8 4.2 CONDUCTED EMISSIONS .............................................................................................................................9 4.3 DUTY CYCLE .............................................................................................................................................10 4.4 CONDUCTED OUTPUT POWER ...................................................................................................................13 4.5 6DB BANDWIDTH & 99% CHANNEL BANDWIDTH ........................................................................................14 4.6 POWER SPECTRAL DENSITY ......................................................................................................................19 4.7 BAND EDGES ............................................................................................................................................22 Conducted Emission Method ...................................................................................................................22 Radiated Emission Method ......................................................................................................................25 4.8 SPURIOUS EMISSION .................................................................................................................................30 Conducted Emission Method ...................................................................................................................30 Radiated Emission Method ......................................................................................................................35 5. TEST SETUP PHOTO .............................................................................................................................51 6. EUT CONSTRUCTIONAL DETAILS .......................................................................................................51 - Page 4 of 51 - Report No.: ET-24020095E02 Tel: +86 755 85259392 Email: [email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street,…

Text truncated - open the document above for the full version.