2BE24E1500portable power station

E1500 User Manual DISCLAIMER Before use, please read the user's manual of this product to ensure that it is used correctly when fully understood. After reading, please keep the user manual in a safe place for future reference. Failure to operate this product correctly could cause you serious injury to yourself or others, or result in product damage and property loss. By using this product, you are deemed to have understood, recognized and accepted all the terms and contents of this document. Users undertake to be responsible for their own behavior and all the consequences arising therefrom. Product Manufacturer is not responsible for all losses caused by the user's failure to use the product in accordance with the User Manual. In compliance with laws and regulations, the Company enjoys the final interpretation of this document and all related documents of this product. In case of updating, revision or termination without prior notice. 1. Parameter specifications parameters weight 约18kg sizes 392 x 280 x 345mm capacity 1536Wh，51.2V Output Specification AC output（x2） pure sine wave 1500W 120V~60Hz USB-A（x2） 5V---2.4A（constant pressure），Max power 12W USB-A quick charge（x2） 5V---2.4A 9V---2A 12V---1.5A 20V---3A(constant pressure)，Max power 60W USB-C（x2） 5/9/12/15/20---5A（constant pressure）， Max power 100W Car Charger Output 12V/10A，Max power 120W DC5521 exports（x2） 12V/3A wireless charging 5V---3A（constant pressure），Max power 15W * Car charger and DC5521 power sharing, maximum output 120W Input Specification AC Input Power 250W，1.1A AC Input Voltage 110-240V Solar Charging Input 12-36V，120W Max Battery Specifications Cell materials LFP Cycle life More than 80% remaining capacity after 800 cycles Type of protection High-temperature protection, low-temperature protection, over-discharge protection, over-charging protection, overload protection, over-current protection, short-circuit protection operating temperature Best use of the ambient temperature 20°C-30°C Discharging ambient temperature -10°C-40°C Charging ambient temperature 0°C-45°C Storage ambient temperature -20°C-45°C（20°C-30°C best） * The ability of this product to charge and discharge depends on the actual temperature of the battery pack. 2. Security guidelines 2.1 Use 1. It is strictly prohibited to place this product near a heat source, such as a fire source or a heating furnace, while it is working. 2.It is strictly prohibited to let this product come into contact with any liquid, do not immerse this product in water or get it wet. Do not use the product in the rain or wet environment. 3. Prohibit the use of this product in a strong static electricity or strong magnetic field environment. 4. Do not disassemble or puncture the product with sharp objects in any way. 5. Prohibit short-circuiting the product with wires or other metal objects. 6. Do not use unofficial parts or accessories. If you need to replace them, please go to the official sales channels of JAC Power to check the relevant purchasing information. 7. When using this product, please strictly follow the operating environment temperature in this user manual. If the temperature is too high, the battery may catch fire or even explode; if the temperature is too low, the performance of the product will be seriously reduced, or even unable to meet the requirements of normal use. 8. Prohibit stacking other heavy objects on the product. 9. Prohibit the use of the process of forcibly blocking the fan, or let the product is not ventilated or dusty space. 10. Please avoid impact, fall, violent vibration, such as serious external impact, please immediately turn off the power to stop using. Please fix it well during transportation to avoid vibration and impact. 11. If the product is accidentally dropped into water during use, please place it in a safe open area and keep it away from the product until it is completely dry. The dried product should not be used again and should be disposed of properly in accordance with section 2.2 of this document. If the product catches fire, use fire extinguishing equipment in the following recommended order: water or water spray, sand, fire blanket, dry powder, carbon dioxide fire extinguisher. 12. If there is dirt on the interface of this product, please wipe it off with a dry cloth. 13. Please place the product carefully to prevent the product from tipping over and causing damage. If the product falls over and is seriously damaged, turn off the power immediately, place the battery in an open area away from combustible materials and people, and dispose of it in accordance with local laws and regulations. 14. Please store the product in a place where children and pets cannot touch it. 15. Store the product in a dry and ventilated place. 16. In humid environments (seashore waterfront and other environments) it is recommended that equipped with moisture-proof bag to use, avoid soaking in water soak, if you find that the product internal water, shall not be used again / power on, please do a good job of anti-electricity measures before touching the product, please immediately static in the safety of the waterproof open area, and immediately contact JAC Power customer service to deal with. 17.This product is not recommended to be used for personal safety related medical emergency equipment power supply, including but not limited to medical grade ventilator (hospital version CPAP: continuous positive airway pressure), artificial lungs (ECMO, Extracorporeal Membrane Oxygenation), etc. In addition, the product is not recommended to be used for medical emergency equipment power supply. Oxygenation), etc. In addition, home version CPAP can be used in a home environment and can be used normally without constant professional monitoring. Please follow medical advice and consult the manufacturer for restrictions on the use of the equipment, and if it is used for general medical equipment, be sure to keep an eye on the status of the power supply to ensure tha…

Text truncated - open the document above for the full version.

Jiangsu Jianghuai Engine Co., Ltd Date: 2024-02-22 Declaration Letter about Limited Use To whom it may concern, WE (Jiangsu Jianghuai Engine Co., Ltd) HEREBY DECLARED THAT Our product Product Description: portable power station Model No: E1500 FCC ID: 2BE24E1500 The Bluetooth function integrated in RF chip CC2541F256 in this device has been disabled by software. Any modification will be highlighted on the release letter, and the impact analysis will also have a review. Verification procedure and verification results will be performed based on the release letter and impact analysis report. Name (Printed): Devin Liu Signature: Title: Project Manager On behalf of Company: Jiangsu Jianghuai Engine Co., Ltd Telephone: 0515-88881549

JiangsuJianghuai Engine Co.,Ltd U.S. Agent Designationfor Serviceof Process (Applicant and U.S.Agentare SeparateParties) TO:FederalCommunications Commission 7435OaklandMillsRoad Columbia,MD 21046 ATTENTION: FCC Certification – Section 2 .911(d)(7) Information Designated U.S. A gent Company Na me: United Consulting Tec hnol og y Services Co., Ltd. FRN: 00 3 3495714 Co ntact Na me: David Wu Street Add ress: 1 7800 CASTLETON ST STE 665 CITY OF IN DUSTRY City/Province/Zip: CA 91748 Telepho n e No : (62 6) 217-4022 Email: [email protected] This letter is to confirm th at we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Ag ent for Service of Pr ocess as required by s ection 47 CFR 2.91 1(d)(7) on behalf of the Applicant noted belo w. U.S. Agent Signature: Date:2024/2/22 Sig ned by (Printed Name/Title): The Ap plicant ac knowledges that they must maintain an agen t for no less than one year after terminating all marketing and importation OR the co nclu sion of an y Commission-related proc eeding involving the equi pment. The applicant further ac knowle dges their responsibility to inform the FCC whenever the Designated U.S. Ag en t information abo ve chan ges. Applicant Company name: Jian gsu Jianghuai Engine Co., Ltd Grantee Code: 2BE24 FRN: 0034953885 FCC I D: 2BE24E1500 Contact Name: Devin Liu Street Ad dress: No.58 Xiwang South Road, Economy developmental district, City/Province/Zip: Yancheng, 224007, jiangsu, China Telephone No: 0515-88881549 Email: [email protected] Applicant Signature: Date:2024/2/22 Signed by(Printed Name/Title):DevinLiu

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jiangsu Jianghuai Engine Co., Ltd Address No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China FRN 0034953885 Grantee Code 2BE24 FCC ID 2BE24E1500 Authorized Contact Name Devin Liu Contact Email [email protected] Contact Phone 0515-88881549 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Jiangsu Jianghuai Engine Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Jiangsu Jianghuai Engine Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2024-02-22 Print Name: Devin Liu Title: Project Manager Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 2 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Cover Letter for Wireless Charger Date: 2024/02/26 Dear Sir/Madam, There’s a Wireless Charger, that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below Wireless Charger with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2) requirements. Applicant: Jiangsu Jianghuai Engine Co., Ltd Product Description: portable power station Model No: E1500 FCC ID: 2BE24E1500 Requirement Technical Result 1)The power transfer frequency is below 1 MHz.126.6KHz Complied 2)The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. 15W Complied 3)A client device providing the maximum permitted load is placed in physical contact with the transmitter Placed directly in transmitter Complied 4)Only § 2.1091-Mobile exposure conditions applyRefer to MPE report Complied 5)The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. Refer to MPE report Complied 6)For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested. one coil Complied Sincerely, Signature: Printed Name: Devin Liu Position/Title: Project Manager

Jiangsu Jianghuai Engine Co., Ltd Date: 2024-02-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BE24E1500 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Jiangsu Jianghuai Engine Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Devin Liu Title: Project Manager Signature: On behalf of Company: Jiangsu Jianghuai Engine Co., Ltd Telephone: 0515-88881549

Jiangsu Jianghuai Engine Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name: Jiangsu Jianghuai Engine Co., Ltd Address: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Regarding: Confidentiality Request regarding application for FCC ID: 2BE24E1500 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Devin Liu Title: Project Manager Company Name: Jiangsu Jianghuai Engine Co., Ltd

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 External Photos for SHCR2306001323PT SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132302 Page: 1 of 12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2306001323PT FCC ID: 2BE24E1500 Applicant: Jiangsu Jianghuai Engine Co., Ltd Address of Applicant: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Manufacturer: Jiangsu Jianghuai Engine Co., Ltd Address of Manufacturer: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Factory: Jiangsu Jianghuai Engine Co., Ltd Address of Factory: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Equipment Under Test (EUT): EUT Name: portable power station Model No.: E1500 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 FCC Rules 47 CFR §2.1091 KDB 680106 D01 RF Exposure Wireless Charging Apps v04 Date of Receipt: 2023-06-29 Date of Test: 2023-06-30 to 2024-01-02 Date of Issue: 2024-01-02 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132302 Page: 2 of 12 Revision Record Version Description Date Remark 00 Original 2024-01-02 / Authorized for issue by: Tested By Bill Wu/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132302 Page: 3 of 12 2 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 CONTENTS ....................................................................................................................................................... 3 3 GENERAL INFORMATION ............................................................................................................................. 4 3.1 DETAILS OF E.U.T. ......................................................................................................................... 4 3.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 4 3.3 TEST LOCATION ............................................................................................................................. 4 3.4 TEST FACILITY ............................................................................................................................... 5 3.5 DEVIATION FROM STANDARDS ......................................................................................................... 5 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 5 4 EQUIPMENTS USED DURING TEST ............................................................................................................ 6 5 RF EXPOSURE TEST RESULTS ................................................................................................................... 7 5.1 OPERATING ENVIRONMENT.............................................................................................................. 7 5.2 EUT OPERATION ............................................................................................................................ 7 5.3 SIMULATION LOAD MODE ................................................................................................................ 7 5.3.1 Measurement Data ................................................................................................................................. 8 5.4 MOBILE PHONE LOAD MODE ............................................................................................................ 9 5.4.1 Measurement Data ................................................................................................................................. 9 6 TEST PHOTOS ............................................................................................................................................... 10 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132302 Page: 4 of 12 3 General Information 3.1 Details of E.U.T. Power supply: Input:AC 100-120V 50/60Hz,330W max AC Output:120VAC,60Hz,1500W QC3.0 Output:5~20VDC,3A USB TYPE A Output: 5VDC,2.4A USB TYPE C Output:5~20VDC,3A,20V,5A DC Output:12VDC,3A Cigarette lighter Output:12VDC,10A Wireless Output:15W max Test voltage: DC 5V Operation frequency: 126.6KHz Antenna type: Inductive Loop Coi…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132301 Page: 1 of 19 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) TEST REPORT Application No.: SHCR2306001323PT FCC ID: 2BE24E1500 Applicant: Jiangsu Jianghuai Engine Co., Ltd Address of Applicant: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Manufacturer: Jiangsu Jianghuai Engine Co., Ltd Address of Manufacturer: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Factory: Jiangsu Jianghuai Engine Co., Ltd Address of Factory: No.58 Xiwang South Road, Economy developmental district, Yancheng, 224007, Jiangsu, China Equipment Under Test (EUT): EUT Name: portable power station Model No.: E1500 Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2023-06-29 Date of Test: 2023-06-30 to 2024-01-02 Date of Issue: 2024-01-02 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132301 Page: 2 of 19 Revision Record Version Description Date Remark 00 Original 2024-01-02 / Authorized for issue by: Tested By Bill Wu/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132301 Page: 3 of 19 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Radiated Emissions （9KHz-30MHz） ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions （30MHz-1GHz） ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR230600132301 Page: 4 of 19 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 DETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 4.4 TEST LOCATION ............................................................................................................................. 5 4.5 TEST FACILITY ............................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 6 5 EQUIPMENT LIST ............................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................. 8 6.1 ANTENNA REQUIREMENT ................................................................................................................. 8 6.1.1 Test Requirement: ................................................................................................................... 8 6.1.2 Conclusion ............................................................................................................................... 8 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................. 9 7.1 20DB BANDWIDTH .......................................................................................................................... 9 7.1.1 E.U.T. Op…

Text truncated - open the document above for the full version.

Justification statement for Antenna To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BE24E1500 Dear Sir/Madam, Only radiated measurements are used for EUT with FCC ID: 2BE24E1500 to show compliance with FCC limits for fundamental and spurious emissions. All measurements were performed radiated and therefore additional antenna gain documentation is not required. The detailed…

Text truncated - open the document above for the full version.