2BE2L-01PISON READY PRO

Quick Start Guide Attention Pison READY Pro Users: To Manage Teams/Multiple READY Wearables, download the Pison READY Pro app to your iOS or Android Device For more information on Pison READY Pro, scan the code or visit pison.com/support 2.5 Welcome to Pison READY Download the Pison READY app to pair your READY Wearable Charging Port Control Button LED Indicator PISON Key The wearable will automatically connect to the Pison READY app out of the box. If you want to connect to Pison READY PRO, please go to the mode screen by pressing the Pison key and select the correct mode. Sensor Array For more information, scan the code or visit pison.com/support Turn READY Wearable ON Press the control button or PISON key (if the wearable does not power on, connect to the charger) Turn READY Wearable OFF Press and hold the control button for two seconds How To Wear Wearing READY is like wearing a wristwatch: 1. Loosen the strap 2. Insert hand through the loose strap loop 4. Set the wearable slightly behind the Ulna (wrist bone) of the hand 5. Tighten strap until the wearable is snug against the skin and does not move freely. Controls IMPORTANT SAFETY AND PRODUCT INFORMATION WARNING Read before use to reduce the risk of personal injury, discomfort, property damage, and other potential hazards. Device Handling Handle the product with care. You may damage the product or the battery if you disassemble, drop, bend, or puncture your device. Using a damaged product may cause overheating or injury. To avoid possible device damage, do not leave the device exposed to a heat source or in a high-temperature location, such as in the sun in an unattended vehicle. Battery Warnings A lithium-ionpolymerbattery is used in this device. If these guidelines are not followed, batteries may experience a shortened life span or may present a risk of damage to the device, fire, chemical burn, electrolyte leak, and/or injury. ● Do not expose the device or batteries to fire, explosion, or other hazard. ● Do not disassemble, modify, remanufacture, puncture, or damage the device or batteries. ● Do not remove or attempt to remove the non-user-replaceable battery. Health Warnings If you have a pacemaker or other internal electronic device, consult your physician before using this product. There are inherent limitations with the technologies used by this product that may cause some of the readings to be inaccurate under certain circumstances, including the user's physical characteristics, and device fit and position. Skin Irritation Some users may experience skin irritation when using this product, especially if the user has sensitive skin or allergies. If you notice any skin irritation, remove the product and give your skin time to heal. To reduce the potential for skin irritation, ensure the product is clean and dry, and do not overtighten. Child Safety This device is not a toy and may contain small parts, plastic, or metal elements, and parts with sharp edges that may cause an injury or create a choking hazard. Water Resistance Do not expose the product to liquids, which can cause a short circuit and overheating. The device is not water resistant. Disposal Dispose of and transport the product according to local regulations. Do not improperly transport them or dispose of them in normal household waste. Radio Frequency Radiation Exposure This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the permissible radio frequency (RF) exposure limits. Limited Warranty EXCEPT FOR THE LIMITED WARRANTIES LISTED BELOW, AND EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAWS, ALL PRODUCTS, SERVICES, AND CONTENT ARE PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OF ANY KIND. WE HEREBY DISCLAIM ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTIES’ RIGHTS. IF IMPLIED WARRANTIES CANNOT BE DISCLAIMED UNDER THE LAWS OF YOUR JURISDICTION, THEN SUCH WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. Your use of any device or product is at your own risk, and you will be solely responsible for, and we expressly disclaim, any and all loss, liability, or damage resulting from your use of any device or product, including damage or loss to your device or product, and any other peripherals, accessories, or apparel connected to the device or product. Limited Warranty: Pison Device. Pison warrants that your Pison Device is free from defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase, except that if you reside in the European Economic Area (“EEA”) and your Pison Device was purchased in the EEA, the warranty period is two (2) years from the date of purchase (such period, the “Warranty Period”). If such a defect arises with your Pison Device during the Warranty Period, Pison will provide the necessary replacement, subject to the conditions below, at no additional charge. In the event of such a defect, to the extent permitted by applicable law, these are your sole and exclusive remedies. This Limited Warranty is non-transferable and excludes: (1) lost or stolen Pison Device(s); (2) damage or failure through normal wear and tear; improper, abnormal, or negligent use; or any use contrary to instructions provided by Pison; (3) cosmetic damage such as scratches, nicks, or dents; (4) any unauthorized modification, alteration, or repair; (5) accident, external causes of damage such as water, flood, fire, or earthquake, or unauthorized commercial use; or (6) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship. Shipping…

Text truncated - open the document above for the full version.

(Pison Technology, Inc.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02.22.2024 FCC ID: (2BE2L-01) Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing (“Pison Technology, Inc.”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing (“Pison Technology, Inc.”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Pison Technology, Inc. Address: 179 Lincoln St Boston, Massachusetts 02111, USA Contact Person: Cristiano Cairo Tel.: Email: [email protected] Sincerely, Signature:

PisonTechnology,Inc. 179LincolnStBoston,Massachusetts02111,USA FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024/02/22 U.S.AgentDesignation PisonTechnology,Inc.acknowledgestheirconsentforthefollowingcontactlocatedintheUnitedStatestoact astheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2BE2L-01): NameandcompanyofU.S.agent:PisonTechnology,Inc. PhysicalU.S.addressofagent:179LincolnStBoston,Massachusetts02111,USA FRNofU.S.agent:0034944207 EmailaddressofU.S.agent:[email protected] PisonTechnology,Inc.acknowledgestheirobligationtoacceptserviceofprocessonbehalfof PisonTechnology,Inc. PisonTechnology,Inc.withtheFRN[0034944207]acceptsitsobligationtomaintainanagentforserviceof processintheUnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminatedall marketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofanyCommission- relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature CristianoCairo Manager PisonTechnology,Inc. Signature CristianoCair Manager PisonTechnology,Inc. 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5

PisonTechnology,Inc. Date ： 2024/02/22 ProductModelNumber:Pison01 FCCID：2BE2L-01 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatORGANIZATION.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyORGANIZATION.onourbehalf shallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email: Telephone: Onbehalfof:PisonTechnology,Inc.

PisonTechnology,Inc. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024/02/22 Subject;RequestforConfidentiality FCCID:2BE2L-01 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:CristianoCairo Title:Manager

ShenzhenBANTEKTestingCo.,Ltd. Page1of10 ReportNo.:BTEK240219001AE Appendix EUTPhotos forBTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page2of10 ReportNo.:BTEK240219001AE EUTConstructionalDetails(EUTPhotos) ShenzhenBANTEKTestingCo.,Ltd. Page3of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page4of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page5of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page6of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page7of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page8of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page9of10 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page10of10 ReportNo.:BTEK240219001AE

Label and location Model No.: Pison 01 FCC ID: 2BE2L-01

ShenzhenBANTEKTestingCo.,Ltd. Page1of5 ReportNo.:BTEK240219001AE Appendix EUTPhotos forBTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page2of5 ReportNo.:BTEK240219001AE EUTConstructionalDetails(EUTPhotos) ShenzhenBANTEKTestingCo.,Ltd. Page3of5 ReportNo.:BTEK240219001AE BTANT ShenzhenBANTEKTestingCo.,Ltd. Page4of5 ReportNo.:BTEK240219001AE ShenzhenBANTEKTestingCo.,Ltd. Page5of5 ReportNo.:BTEK240219001AE

Shenzhen BANTEK Testing Co., Ltd. Report No.: BTEK240219001AE002 Page: 1 of 5 FCC ID: 2BE2L-01 TEST REPORT Application No.: BTEK240219001AE Applicant: Pison Technology, Inc. Address of Applicant: 179 Lincoln St Boston, Massachusetts 02111, USA Manufacturer: Cre8tek (Shenzhen) Company Limited Address of Manufacturer: F4, Building A2, XinJianXing Science and Technology Industrial Park, Fengxin Road, Loucun, Xinhu, GuangMing New District, Shenzhen, Guangdong, China Factory: Cre8tek (Shenzhen) Company Limited Address of Factory: F4, Building A2, XinJianXing Science and Technology Industrial Park, Fengxin Road, Loucun, Xinhu, GuangMing New District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: Pison Sebring Wearable Model No.: Pison 01 Trade Mark: Pison Standard(s) : 47 CFR Part 2 Subpart J Section 2.1093 Date of Receipt: 2024-02-19 Date of Test: 2024-02-19 to 2024-02-22 Date of Issue: 2024-02-23 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Damon Su EMC Laboratory Manager Shenzhen BANTEK Testing Co., Ltd. Report No. :BTEK240219001A002 Page: 2 of 5 Revision Record Version Chapter Date Modifier Remark 01 2024-02-23 Original Authorized for issue by: Carl Yang /Project Engineer Elma Yang /Reviewer Shenzhen BANTEK Testing Co., Ltd. Report No. :BTEK240219001A002 Page: 3 of 5 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 Details of E.U.T. ................................................................................................................................. 4 3.2 Description of Support Units .............................................................................................................. 4 3.3 Test Location ...................................................................................................................................... 4 3.4 Deviation from Standards ................................................................................................................... 4 3.5 Abnormalities from Standard Conditions ........................................................................................... 4 4 Test Requirement ....................................................................................................................................... 5 4.1Assessment Result..................................................................................................................................... 5 Shenzhen BANTEK Testing Co., Ltd. Report No. :BTEK240219001A002 Page: 4 of 5 3 General Information 3.1 Details of E.U.T. Power supply: DC 3.87V from battery and recharge by micro touch spot Test Voltage: AC 120V/60Hz Cable(s): 64CM Frequency Range: 2402MHz to 2480MHz Bluetooth Version: Bluetooth V4.0 BLE Modulation Type: GFSK Number of Channels: 40 Antenna Type: Chip Antenna Antenna Gain: 2.21dBi Remark: The information in this section is provided by the applicant or manufacturer, BANTEK is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter HUAWEI HW-100400C00 / The EUT has been tested as an independent unit. 3.3 Test Location All tests were performed at: Shenzhen BANTEK Testing Co., Ltd., A5&A6, Building B1&B2, No.45 Gangtou Road, Bogang Community, Shajing Street, Bao'an District, Shenzhen, Guangdong, China 518103 Tel:0755-2334 4200 Fax: 0755-2334 4200 FCC Registration Number: 264293 Designation Number: CN1356 No tests were sub-contracted. 3.4 Deviation from Standards None 3.5 Abnormalities from Standard Conditions None Shenzhen BANTEK Testing Co., Ltd. Report No. :BTEK240219001A002 Page: 5 of 5 4 Test Requirement KDB447498 D01 General RF Exposure Guidance v06, Clause 4.3.1(a) [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 Where -f(GHz) is the RF channel transmit frequency in GHz -Power and distance are rounded to the nearest mW and mm before calculation -The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. 4.1Assessment Result Passed Not Applicable Type Frequency (MHz) Conducted Power (dBm) Maximum Tune-up (dBm) Calculating data Limit Result BLE 2402 1.07 2 0.5 3.0 Pass Note: The exposure evaluation safety distance is 5mm. - End of the Report -

2. 4 GHz 1005 Chip Antenna: ANT1005R2400L2L1 Applications: WLAN, 802.11b/g, Bluetooth, etc... Features SMD, high reliability, ultra compact, Omni-directional... Part number Electrical Specification Working Frequency Range 2402 ~2480MHz Peak Gain 2.21dBi(typ.) Impedance 50 Ohm VSWR 3.0 Max Polarization Linear Azimuth Beamwidth Omni-directional Operation Temperature(°C) -40~85°C The specification is defined on EVB. Dimension and Terminal Configuration ANT 1005 R 2400 L2 L1 (1) (2) (3) (4) (5) (6) (1) Product codeChip Antenna (2) Size Code1.0x0.5mm (3) PackingTape and reel (4) Frequency2.4GHz (5) SeriesL2 (6) TypeL1 Dimension (mm) No. Terminal Name L 1.00 ± 0.10 P1 Ground point W 0.50 ± 0.10 P2 Ground point T 0.37 Max P3 Feeding Pad P1 0.25 +0.10/ -0.15P4 Feeding Pad P2 0.15 +0.10/ -0.15 P3 0.25 +0.10/ -0.15 P4 0.15 +0.10/ -0.15 Manufacturer: Always Promotion, Inc. Address:1000 Sawgrass Village Dr Ste 102, Ponte Vedra Beach, Fl 32082 2.4GHz 1005 Chip Antenna: ANT1005R2400L2L1 Evaluation Board Reference - Regular Layout PCB Dimension Antenna Layout Reference 2.4GHz 1005 Chip Antenna: ANT1005R2400L2L1 Electrical Characteristics Return Loss Radiation Max Gian:2.21dBi Efficiency = 70.3% 2.4GHz 1005 Chip Antenna: ANT1005R2400L2L1 Taping Specifications Reel and Taping Specification Reel Specification TYPE SIZE A ψB ψC ψD W ψM 1005 7” 10K/Reel 2.0±0.5 13.5±1.0 21±1.0 60±1.0 11.5±2.0 178±2.0 Tapping Specification Packaging Type A B W E F G H T ψD P Paper Type 1005 0.8±0.05 1.3±0.05 8.0±0.20 1.75±0.10 3.0±0.05 4.0±0.10 2.0±0.05 0.75±0.10 1.50±0.104.0±0.1 2.4GHz 1005 Chip Antenna: ANT1005R2400L2L1 TYPICAL ROHS REFLOW PROFILE Pb free solder Soaking Working Soldering Peak Temp. Time Temp. Time Temp. Time Temp. T1 T2 t1 T3 t2 T4 t3 T5 150°C 180°C 60 to 120sec 230°C more than 30sec 247 to 253°C within 10sec 260°C Max. Revision History Version Date Description Ver.01 Nov.2023 New issue. Nov. 2023 Ver.01

ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK240219001AE001 Page: 1 of 47 FCCID:2BE2L-01 TESTREPORT ApplicationNo.: BTEK240219001AE Applicant:PisonTechnology,Inc. AddressofApplicant:179LincolnStBoston,Massachusetts02111,USA Manufacturer:Cre8tek(Shenzhen)CompanyLimited AddressofManufacturer:F4,BuildingA2,XinJianXingScienceandTechnologyIndustrialPark, FengxinRoad,Loucun,Xinhu,GuangMingNewDistrict,Shenzhen, Guangdong,China Factory:Cre8tek(Shenzhen)CompanyLimited AddressofFactory:F4,BuildingA2,XinJianXingScienceandTechnologyIndustrialPark, FengxinRoad,Loucun,Xinhu,GuangMingNewDistrict,Shenzhen, Guangdong,China EquipmentUnderTest(EUT): EUTName:PisonSebringWearable ModelNo.:Pison01 TradeMark:Pison Standard(s): 47CFRPart15,SubpartC15.247 DateofReceipt: 2024-02-19 DateofTest: 2024-02-19to2024-02-23 DateofIssue: 2024-02-23 TestResult: Pass* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. DamonSu EMCLaboratoryManager ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK240219001AE001 Page:2of47 RevisionRecord VersionChapterDateModifierRemark 012024-02-23Original Authorizedforissueby: CarlYang/ProjectEngineer ElmaYang/Reviewer ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK240219001AE001 Page:3of47 2TestSummary RadioSpectrumTechnicalRequirement ItemStandardMethodRequirementResult AntennaRequirement 47CFRPart15, SubpartC15.247 N/A 47CFRPart15,Subpart C15.203&15.247(b)(4) Pass RadioSpectrumMatterPart ItemStandardMethodRequirementResult ConductedEmissions atACPowerLine (150kHz-30MHz) 47CFRPart15, SubpartC15.247 ANSIC63.10(2013) Section6.2 47CFRPart15,Subpart C15.207 Pass ConductedPeak OutputPower ANSIC63.10(2013) Section11.9.1.3 47CFRPart15,Subpart C15.247(b)(3) Pass Minimum6dB Bandwidth ANSIC63.10(2013) Section11.8.1 47CFRPart15,Subpart C15.247a(2) Pass PowerSpectrum Density ANSIC63.10(2013) Section11.10.2 47CFRPart15,Subpart C15.247(e) Pass ConductedBand EdgesMeasurement ANSIC63.10(2013) Section11.13.3.2 47CFRPart15,Subpart C15.247(d) Pass ConductedSpurious Emissions ANSIC63.10(2013) Section11.11 47CFRPart15,Subpart C15.247(d) Pass RadiatedEmissions whichfallinthe restrictedbands ANSIC63.10(2013) Section6.10.5 47CFRPart15,Subpart C15.205&15.209 Pass RadiatedSpurious Emissions(Below 1GHz) ANSIC63.10(2013) Section6.4,6.5,6.6 47CFRPart15,Subpart C15.205&15.209 Pass RadiatedSpurious Emissions(Above 1GHz) ANSIC63.10(2013) Section6.4,6.5,6.6 47CFRPart15,Subpart C15.205&15.209 Pass Note: E.U.T./EUTmeansEquipmentUnderTest. Passmeansthetestresultpassedtheteststandardrequirement,pleasefindthedetaileddecisionrule inthereportrelativesection. ShenzhenBANTEKTestingCo.,Ltd. ReportNo.:BTEK240219001AE001 Page:4of47 3Contents Page 1CoverPage...............................................................................................................................................................1 2TestSummary...........................................................................................................................................3 3Contents.....................................................................................................................................................4 4GeneralInformation..................................................................................................................................6 4.1DetailsofE.U.T..................................................................................................................................6 4.2DescriptionofSupportUnits..............................................................................................................6 4.3MeasurementUncertainty..................................................................................................................6 4.4TestLocation......................................................................................................................................7 4.5DeviationfromStandards...................................................................................................................7 4.6AbnormalitiesfromStandardConditions...........................................................................................7 5EquipmentList..........................................................................................................................................8 6RadioSpectrumTechnicalRequirement.............................................................................................10 6.1AntennaRequirement......................................................................................................................10 6.1.1TestRequirement:.......................................................................................................................10 6.1.2Conclusion...................................................................................................................................10 7RadioSpectrumMatterTestResults....................................................................................................11 7.1ConductedEmissionsatACPowerLine(150kHz-30MHz).............................................................11 7.1.1E.U.T.Operation..........................................................................................................................11 7.1.2TestModeDescription.................................................................................................................11 7.1.3TestSetupDiagram.....................................................................................................................11 7.1.4MeasurementProcedureandData............................................................................................12 7.2ConductedPeakOutputPower.......................................................................................................15 7.2.1E.U.T.Operation..........................................................................................................................15 7.2.2TestModeDescription................................…

Text truncated - open the document above for the full version.

ShenzhenBANTEKTestingCo.,Ltd. Page1of3 ReportNo.:BTEK240219001AE Appendix SetupPhotos ShenzhenBANTEKTestingCo.,Ltd. Page2of3 ReportNo.:BTEK240219001AE ConductedEmissionsatMainsTerminals(150kHz-30MHz) RadiatedSpuriousEmissions(Below1GHz) ShenzhenBANTEKTestingCo.,Ltd. Page3of3 ReportNo.:BTEK240219001AE RadiatedSpuriousEmissions(Above1GHz)