2BE7D928WCPCar Multimedia Player

XA- 928WCP Car Multimedia Player USER MANUAL XA-928WCP Tableofcontents Wiring Diagram 2 General Operation 3 AM/FM Tuner Operation 4 Multimedia player 5 AUX in/Rearview lens 5 Phone Linq Software 6 Setting Menu 7 Troubleshooting 8 Systematic Parameter 9 For your safety, the driver should not operate the controls while driving AIso , while driving , keep the volume to a level at which external sounds can be heard . precautions 1. when the interio r of the car is extremely cold and the unit is used soon after switching on the heater and moisture may form on the unit and proper playback may not be possible. 2. This unit uses precision parts and components for its operation .In the event that trouble arises ,never open the case ,disassemble the unit ,or lubricate the rotating parts .Contact your service center. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. A. REAR CAM INPUT B. VIDEO INPUT C. VIDEO OUTPUT1 D. VIDEO OUTPUT2 E. FRONT CAM INPUT F. LEFT AUDIO INPUT G. REAR LEFT AUDIO OUTPUT H. FRONT LEFT AUDIO OUTPUT I. SUBWOOFER OUTPUT J. RIGHT AUDIO INPUT K. REAR RIGHT AUDIO OUTPUT L. FRONT RIGHT AUDIO OUTPUT R.C AM V-IN A B F.CAM L-IN E F SUB R-IN IJ V-OUT1 C RL G RR K V-OUT2 D FL H FR L R.CAM V-IN V-O UT1 V-OUT2 MEDIA SUB R-IN RR FR F.CAM L-IN RL FL Generaloperation Note: fthere isnoanydeviceconnection, some icons likecamera wil lbeshowednodevice.click is invalid inthiscase .Displaysetting is invalid ifthere isnoaudioorvideoplaying Radio Multimediaplayer ·EQ-setting :pop ,ROCK ,classic ,Jazzoroff Time ·slidethefigures inthe settime interface Language portuguese ，French，chines e,etc. camera inpu when reversing.(Note camera isnot included) 3 car logo steeringwheelcontro settin calibration calibrate the touchscreen powersavingmode AUX Input FMTUneroperat ion Radio interfaceRDsturnonfunction TouchRadio icon inmain interfaceorpressmodekey inpanel/SRckey in remotecontrollertoswitch to radiomode. 4 -- 5 -- Multimedia player Support avarity of audio and video formats Music interface The system will automatically read certain devices inputted into the unit The user can directly click options in directory menu to perform play. Note: Sliding the controlling bar in the bottom to show the next page. AUX in(Auxiliary device input Click " AUX In " in from the main interface SRC key in remote control to switch to AUX in Mode. AUX in enables external media sources to connect to the system, like camera, video games, (controlled by remote control} etc. No auxiliary device input shows at the below picture. Connect external devices through the 3.5mm auxiliary audio/video input. It can display the corresponding picture as the output video. Rear view Camera Auto operation: After connect with reverse camera, it will auto-detected the reverse signal and show the reverse pictures. The system will swift to any mode to rear view lens mode automatically. When reverse is over, the system will come back to previous mode. -- 6 -- Connect to the unit via your mobile phone through the standard port and transfer the picture and audio from the phone to the device. You can control the phone through the device's screen , such as receiving calls, dialing calls, listening to music, watching movies or photos. Connect your device using the with original cable your phone came with, then touch the icon to open the menu, and follow the instructions. setting Note:slidingthebaronthe leftsidetoseemore optionalsettings 7 Troubleshooting Phenomenon Reasons Solutions Normal Fuse of machine power supply and auto vehicle battery is burnt, Change for fuse of the collect types; Not operating Volatge of power supply is overloaded Automatic protection system avoids fault due to illegal operation Wrong pin assignment ISO connector Adjust voltage; Reset the system by pressing the Resetkey Check the wiring diagram Remote comtrol Battery is out of power; Change new battery; doesn't work Battery is not placed correctly Reinstall battery Check the connecion; Increase the Disconnection; Volume setting is low volume; wrong volume; Reconnection the silence wire complied with the installation Noor low sound connection of Silence; Loudspeaker fault; Volume balance setting bias Earthing in loudspeaker connection instruction; Change for a new loudspeaker; Adjust the volume balance setting to middl…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: CAD Business LLC FRN: 0035021005 Contact Name: UZAIR HUSSAIN Address: 11379 Harry Hines Blvd, Dallas, TX 75229 USA Telephone No: +1-972-977-3880 Email: [email protected] Applicant: Company name: CAD Business LLC FRN: 0035021005 Product Description: Car Multimedia Player Grantee code: 2BE7D FCC ID: 2BE7D928WCP Contact Name: UZAIR HUSSAIN Address: 11379 Harry Hines Blvd, Dallas, TX 75229 USA Telephone No: +1-972-977-3880 Email: [email protected] [CAD Business LLC] certifies that, as of the date of this filing of the application with the TCB, [CAD Business LLC] is our designated US agent for service of process for the above referenced FCC ID. [CAD Business LLC] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [CAD Business LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 04.0 1.2024 Applicant’s Name: UZAIR HUSSAIN US Agent’s Name: UZAIR HUSSAIN Title: Director Title: Director Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: CAD Business LLC FRN: 0035021005 Grantee code: 2BE7D FCC ID: 2BE7D928WCP Contact Name: UZAIR HUSSAIN Address: 11379 Harry Hines Blvd, Dallas, TX 75229 USA Telephone No: +1-972-977-3880 Fax No: Email: [email protected] i. [CAD Business LLC] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ CAD Business LLC] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. CAD Business LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 04.0 1.2024 Applicant’s Name: UZAIR HUSSAIN Title: Director Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: CAD Business LLC Address: 11379 Harry Hines Blvd, Dallas, TX 75229 USA Product Name: Car Multimedia Player Model Number: XA-928WCP FCC Identifier: 2BE7D928WCP We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: UZAIR HUSSAIN Date: 4/1/24 Title: Director Signature of applicant:

C5266091_X10_Ed.2 1/1 CAD Business LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 4/1/2024 Subject: Request for Confidentiality FCC ID: 2BE7D928WCP T o Whom It May Concern, P ursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒☐ Schematics ☒☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐☐ RF Exposure Info No No Operational Description ☒☐ Cover Letter(s) No No SDR Software / Security Info ☐ No N OTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. A bove mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. ☒ C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: UZAIR HUSSAIN Title: Director

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (External Photos) Model: XA-928WCP Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

30mm 70mm Car Multimedia Player Trade: XELON AUDIO Model: XA-928WCP FCC ID: 2BE7D928WCP InputDC 12V CAD Business LLC 11379 Harry Hines Blvd, Dallas, TX 75229 USA XA-928WCP FCC

Page 1 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: XA-928WCP Page 2 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 5 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] ANT Page 6 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi231117013-03E2 Date of issue: 2024-03-15 Applicant: CAD Business LLC Product: Car Multimedia Player Model(s): XA-928WCP FCC ID: 2BE7D928WCP Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 5 - Report No.: MTi231117013-03E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 5 - Report No.: MTi231117013-03E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: CAD Business LLC Address: 11379 Harry Hines Blvd, Dallas, TX 75229 USA Manufacturer: CAD Business LLC Address: 11379 Harry Hines Blvd, Dallas, TX 75229 USA Product description Product name: Car Multimedia Player Trademark: XELON AUDIO Model name: XA-928WCP Series Model: N/A Standards: N/A Test procedure: KDB 447498 D01 v06 Date of Test Date of test: 2024-03-08 to 2024-03-14 Test result: Pass Test Engineer : (Maleah Deng) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) - Page 4 of 5 - Report No.: MTi231117013-03E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R 2 ) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. - Page 5 of 5 - Report No.: MTi231117013-03E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Measurement Result BR&EDR: Operation Frequency: 2402-2480MHz, Power density limited: 1mW/ cm 2 Antenna Type: PCB Antenna Antenna gain: -0.68dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(-0.68/10)=0.86 BR&EDR: Channel Freq. (MHz) modulation conducted power Tune- up power (dBm) Max Antenna Evaluation result Power density Limits (dBm) tune-up power Gain (mW/cm 2 ) (mW/cm 2 ) (dBm) (mW) (dBi) Numeric 2402 GFSK -1.86 (-1)±1 0 1.000 -0.68 0.86 0.0002 1 2441 -3.30 (-3)±1 -2 0.631 -0.68 0.86 0.0001 1 2480 -4.40 (-4)±1 -3 0.501 -0.68 0.86 0.0001 1 2402 π/4- DQPSK 0.16 0±1 1 1.259 -0.68 0.86 0.0002 1 2441 -1.38 (-1)±1 0 1.000 -0.68 0.86 0.0002 1 2480 -2.60 (-2)±1 -1 0.794 -0.68 0.86 0.0001 1 2402 8DPSK 0.63 0±1 1 1.259 -0.68 0.86 0.0002 1 2441 -0.75 0±1 1 1.259 -0.68 0.86 0.0002 1 2480 -2.08 (-2)±1 -1 0.794 -0.68 0.86 0.0001 1 Conclusion: For the max result: 0.0002≤ 1.0 test exclusion threshold, No SAR is required ----END OF REPORT----

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT HorizontalVertical 2400MHz 2450MHz2500MHz2400MHz2450MHz 2500MHz Center Frequency -1.73-0.84-0.68-6.15-3.70-2.32 MAX. Gain -0.68 dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length 38.20mm Manufacture Shen zhen Bluetrum Technology Co., Ltd. Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dBi) Frequency (MHz) Max Min Avg 2400 -1.73178 -30.0815 -8.48713 2450 -0.845801 -38.5605 -7.88012 2500 -0.685586 -24.0318 -6.79139 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dBi) Frequency (MHz) Max Min Avg 2400 -6.1530 -24.1420 -13.0295 2450 -3.7054 -26.5836 -10.6700 2500 -2.32122 -30.4301 -9.70536 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi231117013-03E1 Date of issue: 2024-03-15 Applicant: CAD Business LLC Product: Car Multimedia Player Model(s): XA-928WCP FCC ID: 2BE7D928WCP Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 7 1.4 Description of support units ....................................................................................................................... 7 1.5 Measurement uncertainty .......................................................................................................................... 7 2 Summary of Test Result .................................................................................................................. 8 3 Test Facilities and accreditations ................................................................................................... 9 3.1 Test laboratory ........................................................................................................................................... 9 4 List of test equipment .................................................................................................................... 10 5 Evaluation Results (Evaluation) .................................................................................................... 11 5.1 Antenna requirement ............................................................................................................................... 11 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 12 6.1 Occupied Bandwidth ................................................................................................................................ 12 6.2 Maximum Conducted Output Power ........................................................................................................ 14 6.3 Channel Separation ................................................................................................................................. 16 6.4 Number of Hopping Frequencies ............................................................................................................. 17 6.5 Dwell Time ............................................................................................................................................... 18 6.6 RF conducted spurious emissions and band edge measurement .......................................................... 20 6.7 Band edge emissions (Radiated) ............................................................................................................ 21 6.8 Radiated emissions (below 1GHz) .......................................................................................................... 24 6.9 Radiated emissions (above 1GHz) .......................................................................................................... 28 Photographs of the test setup ............................................................................................................. 32 Photographs of the EUT....................................................................................................................... 33 Appendix A: 20dB Emission Bandwidth ............................................................................................. 34 Appendix B: Maximum conducted output power ............................................................................... 38 Appendix C: Carrier frequency separation ......................................................................................... 42 Appendix D: Time of occupancy ......................................................................................................... 44 Appendix E: Number of hopping channels......................................................................................... 51 Appendix F: Band edge measurements ....................................................................…

Text truncated - open the document above for the full version.

Page 51 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix E: Number of hopping channels Test Result Test Mode Antenna Frequency [MHz] Result [Num] Limit [Num] Verdict DH5 Ant1 Hop 79 ≥15 PASS 2DH5 Ant1 Hop 79 ≥15 PASS 3DH5 Ant1 Hop 79 ≥15 PASS Page 52 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Graphs DH5_Ant1_Hop 2DH5_Ant1_Hop 3DH5_Ant1_Hop Page 53 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix F: Band edge measurements Test Graphs DH5_Ant1_Low_2402 DH5_Ant1_High_2480 DH5_Ant1_Low_Hop_2402 Page 54 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] DH5_Ant1_High_Hop_2480 2DH5_Ant1_Low_2402 2DH5_Ant1_High_2480 2DH5_Ant1_Low_Hop_2402 Page 55 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 2DH5_Ant1_High_Hop_2480 3DH5_Ant1_Low_2402 3DH5_Ant1_High_2480 Page 56 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 3DH5_Ant1_Low_Hop_2402 3DH5_Ant1_High_Hop_2480 Page 57 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix G: Conducted Spurious Emission Test Graphs DH5_Ant1_2402_0~Reference DH5_Ant1_2402_30~1000 DH5_Ant1_2402_1000~26500 Page 58 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] DH5_Ant1_2441_0~Reference DH5_Ant1_2441_30~1000 DH5_Ant1_2441_1000~26500 DH5_Ant1_2480_0~Reference Page 59 of 65 Report No.: MTi231117013-03E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] DH5_Ant1_2480_30~1000 DH5_Ant1_2480_1000~26500 2DH5_Ant1_2402_0~Reference Page 60 of 65 Report No.: MTi231117013…

Text truncated - open the document above for the full version.