2BE7M-AWP307Magnetic wireless charging

Stand Product Manual Stand UPC: 856600013244,056500013237 Model Numbers：AW-P307 FCC ID: 2BE7M-AWP307 IC: 32103-AWP307 Version 1.0 Package Contents • Stand • 0.8 meter USB-C cable • Requires 15W USB-C Power Adapter (not Included) Specifications Weight 35 g Size 63.9 mm Input 15W Output .5/1A charging speed for Qi wireless charging devices • Charges iPhone 14 and later Devices • Magnetic alignment feature only worlw with iPhone 14 and later • AirPods Pro, AirPods Gen3 Product Overview 1 Magnetic Qi Charger 2 Pull bracket Charging Tips Stand features a magnetic Qi charger. To begin charging, simply center your device on the puck and allow it to snap into optimal charging position. Stand works with MagSafe enabled iPhones(iPhone 12 and later). Disposal of Product and Packaging Packaging: The inner cardboard tray is recyclable and can be placed in your recycling bin. The outer box and attached foam inserts are not recyclable. These components are disposable in your landfill waste. Product: Should your product become damaged or defective, and is no longer covered under warranty, please responsibly dispose of the product and its AC power adapter at your local e-waste collection center. If an e-waste collection center is unavailable to you please contact us at [email protected] and we will accept your used device back for responsible disposal. Warranty NThe product warranty is 2 years, and the charging cable warranty is 1 year, within the normal and correct use Contact [email protected] Legal FCC Statement NOTE: This equ pment has been tested and found to compy with the limits for a Class B digital dev ce, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainstharmful interference in a residential installatlon. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However. there is no guarantee that interference will notoccurina particu ar installation. If this equipment does cause harmful interference to radio or television reception; which can be determined by turningthe equpment offand on, the user is encouraged totry to correct the interference by one or more of the following measures Reorientor relocate the receiving antenna .Increase the separation between the equipment and receiver .Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technican for help. Changes or modifications not expressly approved by the party responsible for compliance coulld void the user's authority to operate the equipment This dev ce complieswith Part 15 of the FCC Rules. Operation is subject to the folowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equpment shall be installed and operated with minimum distance 20cm between the radiator & body Statement for IC This dev ce contains licence exempt transmltter(s)/receiver (s) that compy with Innovation, Science and Economic DeVelopment Canada's licence exempt RSS(s) Operation is subject to the fo owing two conditions (1) This dev ce may not cause interference (2) This de ce must accept any interfererce, including interference that may cause undesired operation of the device L'emetteur/récepteur exempt de licence conteny dans le présent appareil est conforme aux CNR d Innovation, Sciences et Dé e oppement économique Canada app icables aux appareils radio exempts de licence. L exploitation estautorisée aux deux conditions suivantes: (1) L' appareil ne doit pas produ re de brouillage (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement Radio Frequency Exposure Statement for lC This equipment comp ies with IC exposure limits setforth for an uncontrolled environment. This equ pment shall be installed and operated with minimum distan e 10cm between the radiator & body Cet équ pement est conforme aux limites d'exposition 1C déf nies pour un env ronnement no on controle.Cet équipement doit être installé et utilise avec une distance minimale de 10cm entre le radiateuret la carrosserie.

Shenzhen Awell Technology Co., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-03-15 FCC ID: 2BE7M-AWP307 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen Awell Technology Co., LTD certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen Awell Technology Co., LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Shenzhen Awell Technology Co., LTD Address: 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Contact Person: Amy Rong Tel.: +86 15820465916 Email: [email protected] Sincerely, Signature:

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:4358SBANNOCKSTENGLEWOOD,CO80110UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenAwellTechnologyCo.,LTD. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenAwellTechnologyCo.,LTD ProductDescription:Magneticwirelesscharging FRN:0035022334 GranteeCode:2BE7M FCCID:2BE7M-AWP307 ContactName:AmyRong Address:4/F,BuildingC,StudentIndustrialPark,HongqiaotouCommunity,SonggangStreet, Bao'anDistrict,Shenzhen TelephoneNo:+8615820465916 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2024/3/22 Applicant’sName:AmyRongUSAgentforServiceofProcess’sName: Title:ManagerTitle:Manager SignatureSignature

Acknowledgment Letter Huatao Intelligence A11 coil G43.5-0.8-24-2P-11MM August 1, 2023 CustomerName： Customerpart number： Our company model： Sample delivery date： Supplier: Dongguan Jieruisi Technology Co., Ltd draw to examine Ratify Lu Lin Deng Xianggui Lu Rusheng The customer acknowledges that: Qualifiedunqualifiedrecognize Note Dongguan Jieruisi Technology Co., Ltd Tel: Fax: 86+13425179000 address：152 Guanchang Road, Taigongling Village, Dalingshan Town, Dongguan City Customer Name Customer part number Our company model versionDate Huatao Intelligence G43.5-0.8-24-2P-11MMA02023.8.1 一、Plan structure diagram： unit:MM 二、Product parameters： Foot position Wire diameter number of turns Note 1-20.08*24*2P10 Hot air twisted wire 三、Technical requirements: 1. Fix the wire head and tail to prevent loose or broken wires 2．According to customer requirements, cut the excessively long wire ends and tin them with a uniform tin plating depth of 3 ± 1MM 3．Apply appropriate white glue on the soft magnetic sheet, attach the coil, and ensure that the surface of the product is clean and tidy during the process 4.The soft magnetic disc used is with circular holes and is undamaged 5.5. Additional processes (according to customer requirements): 四、Electrical parameters： 1.Inductance value, Q value： PIN 1 — 2 = 6.5uH±0.3UH q-value≥40 The above inductance values are based on Quanhua 1062A instrument, with 10KHZ/0.3Vrms as the standard or equivalent instrument. Q value is based on Quanhua 1062A instrument, with 100KHZ/0.3Vrms as the standard or equivalent instrument. 5. Material list: No.name material quality supplier Note 1 Hot air twisted wire 0.08X24X2P Uyghur or equivalent 2 magnetic sheet G25 Soft substrate Tiantong or equivalent 3 tin High temperature environmental protection Qiandao or equivalent 4 White glue BY882 Qiandao or equivalent 5 Double-sided adhesive diameter42mm Honghui or equivalent 6 High temperature adhesive tape 8MM

Shenzhen Awell Technology Co., LTD Date：2024-3-15 Product Model Number: Magnetic wireless charging FCC ID：2BE7M-AWP307 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86 15820465916 On behalf of: Shenzhen Awell Technology Co., LTD

Shenzhen Awell Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 15, 2024 Subject; Request for Confidentiality FCC ID: 2BE7M-AWP307 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Amy Rong Signature: Name: Amy Rong Title: Manager

Ext Photos Photo 1（For model AW-P307） Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Label and Label Location

Int Photos Photo 1（For model AW-P307） Photo 2 Photo 3 Photo 4 ANT

- Page 1 of 11 - Report No.: HB20240301001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Magnetic wireless charging Trade Mark: N/A Model Number: AW-P307 FCC ID: 2BE7M-AWP307 Prepared for Shenzhen Awell Technology Co., LTD 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20240301001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ............................................. 9 4.1.4. Test Setup .................................................................................................................................................... 9 4.1.5. Test Result ................................................................................................................................................. 10 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................11 - Page 3 of 11 - Report No.: HB20240301001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Awell Technology Co., LTD Address ................................. : 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Manufacturer's Name .......... : Shenzhen Awell Technology Co., LTD Address ................................. : 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Product description Product name ........................ : Magnetic wireless charging Model Number ....................... : AW-P307 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Mar. 01, 2024~Mar. 14, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20240301001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming Di…

Text truncated - open the document above for the full version.

- Page 1 of 28 - Report No.: HB20240301001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Magnetic wireless charging Trade Mark: N/A Model Number: AW-P307 FCC ID: 2BE7M-AWP307 Prepared for Shenzhen Awell Technology Co., LTD 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 28 - Report No.: HB20240301001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 9 5 TEST ITEM AND RESULTS ...................................................................................................................................11 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 11 5.2 CONDUCTED EMISSION ............................................................................................................................................. 12 5.3 RADIATED EMISSION ................................................................................................................................................ 16 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 21 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................22 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................24 - Page 3 of 28 - Report No.: HB20240301001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Awell Technology Co., LTD Address ................................. : 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Manufacturer's Name .......... : Shenzhen Awell Technology Co., LTD Address ................................. : 4/F, Building C, Student Industrial Park, Hongqiaotou Community, Songgang Street, Bao 'an District, Shenzhen Product description Product name ........................ : Magnetic wireless charging Model Number ....................... : AW-P307 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Mar. 01, 2024~Mar. 14, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 28 - Report No.: HB20240301001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) …

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted Emission MPE