2BE8S-RENO6PROmobile phone

Smart Phone User Manual Model ：Reno6 pro 1 Basic Operations Switch on Touch and hold the Power button until the phone switches on. Note: If you have enabled USIM/SIM locking in the Settings menu, enter the correct PIN number upon power-on before you use the phone. Caution: Three consecutive attempts of entering an incorrect PIN will lock the SIM card. If it is locked, use a PUK provided by the operator to unlock it. Switch off Touch and hold the “Power button” until the Phone Options screen displays. Tap " Power off ” to switch off the phone. Unlock Short press the “Power button” light up the screen, according to the clues of the screen interface can be unlocked. Touchscreen Usage Use your fingers to perform operations directly on icons, buttons, and the on-screen keypad. Tap/Touch/Click Tap the icon of an App to start it. Touch & Hold Touch and hold an item to display a pop-up menu of options. For 2 example, go to Address Book, touch and hold a contact on the Address Book page, and a menu of options pops up. Drag Tap an item on the screen and drag it to another place. Slide/Sweep To sweep vertically or horizontally across the screen, you can view apps, pictures, and webpages in a convenient manner. Scroll Similar to sweeping, but faster. Pinch Put two fingers on the screen to pinch in or out an item, such as a webpage or picture. 3 Home Screen 1. Status bar: allows you to view status icons and notices, such as signal, battery, current time and data service. 2. Notification bar: On the Home screen, tap the status bar and drag it down to display the notification bar. Tap this bar. Then you can view the notices. Touch the return button to switch back to the previous page. 3. App icon: Tap an app to open it. 4. Main menu: Tap the arrow and drag it up to enter the app main menu. 4 Phone Settings To display the Settings menu, tap the Settings icon directly. 1.SIM card: In the Settings menu, choose SIM Card. You can then manage your SIM cards on the pop-up page. 2. Network: In the Settings menu, select WLAN to configure your radio network; or select Traffic usage to configure your mobile date services; or select Mobile Network under More to configure data services of your phone. 3. Sound: In the Settings menu, choose Sound. The allows you to set the volume, enable/disable vibration during ringing, and select ringtones for incoming calls and messages, as well as enable/disable keypad touch sound effect, touch alert tone, and screen lock tone 4. Display: allows you to configure the brightness, wallpaper, automatic device rotation, sleep duration, and font size. 5. Security: In the Settings menu, choose Security. The Security page allows you to set the screen locking mode and USIM/SIM locking mode. App Permission: allows you to configure certain permissions for an App and monitor their usage. 6. Anti-theft: allows you to remotely lock the phone or clear all data of it. 7. Manage apps: In the Settings menu, choose Apps. Then you can view or manage your apps. Note: Disable or unload certain apps if available space is less than 100MB. 8. Message: On the Message page, tap the Menu button and choose Settings. On the Message Settings page, you can enable/disable report sending, create or select a message template, 5 and configure a message alert tone for each short or multimedia message. 9. Call: To display the Call Settings page, choose Settings on the Call page. Shortcuts On the Home screen, lightly drag down the Status bar. On the screen top, a group of shortcuts are displayed, such as Settings, WLAN, Bluetooth, Brightness, Auto-rotate, flashlight Airplane mode and so on. Tap any of them to open it quickly. Widget Android8.1 offers multiple ease-of-use widgets on the Home screen. On this screen,Long press the screen and then the Widget tab, to display the widget selection page. Tap and hold a desired widget to be put on the Home screen, drag it left or right to locate it at a proper place, and complete the Widget settings as prompted. Move/Uninstall apps 1. Access the App main menu from the Home screen. On the ALL App page, tap and hold an app to be put on the Home screen, and drag it left or right to locate it at a proper place. In this way, a desktop app is created. 2. On the All App page, tap and hold an app, and drag it to Uninstall on the desktop. In this way, the app is removed from the phone. Note: You are not allowed to uninstall basic apps of the phone. 6 3. On the All App page, tap and hold an app, and drag it to APP Info. on the desktop. In this way, details about the app is displayed. Call This phone allows you to make or answer a call, initiate an emergency call, and launch a multi-party call. On the bottom left of the Home screen, tap the Dial-up icon. The Dial-up page is displayed. Enter a phone number and choose between card 1 and card 2 to make the call. When you enter the number, the phone will automatically search among all contacts a number that best matches the entered numerals, to facilitate your operation. During a call, tap Add a Call, and this call automatically switches to Silent mode. Enter the number of another contact, tap Dial-up, and the previous call automatically switches to On-hold mode. After the second call is answered, tap Join. In this way, a teleconference is established to achieve a multi-party talk. Note: You need to subscribe to this service from your carrier before you use it. You are also allowed to initiate a call by selecting a phone number from the list of contacts or the Message page. Contacts Tap Contacts to open it. The Contacts page offers management functions. It allows you to view the list of contacts and related details, make a call or send an SMS to a certain contact, and share the contact. 7 Contact import: On the Contacts page, tap the Menu button, and choose Import/Export to select a mode for importing or exporting a contact. Add a contact: On the lower right of the Contacts page, tap the Add button to add a contact to your phone or USIM/SIM.…

Text truncated - open the document above for the full version.

Shenzhen kehuitong Technology Co.,Ltd F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-4-1 To whom it may concern: We, Shenzhen kehuitong Technology Co.,Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2BE8S-RENO6PRO) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Zhifeng Liu General Manager Shenzhen kehuitong Technology Co.,Ltd 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Shenzhen kehuitong Technology Co.,Ltd Add: F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Date: 2024-4-1 FCC ID: 2BE8S-RENO6PRO Dear Sir/Madam, We, Shenzhen kehuitong Technology Co.,Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: mobile phone Model no.: Reno6 pro, Reno4pro, Reno5 pro Sincerely, Name/Title： Zhifeng Liu /General Manager Company: Shenzhen kehuitong Technology Co.,Ltd Address: F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Phone: 860755-32902722 Fax: 860755-32902722 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-4-1> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BE8S-RENO6PRO Reno6 pro For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Zhifeng Liu /General Manager Company: Shenzhen kehuitong Technology Co.,Ltd Address: F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Phone: 860755-32902722 Fax: 860755-32902722 E-Mail: [email protected]

Shenzhen kehuitong Technology Co.,Ltd F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Date: 2024-4-1 FCC ID: 2BE8S-RENO6PRO Model Number: Reno6 pro To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen kehuitong Technology Co.,Ltd, declare that this EUT (FCC ID: 2BE8S-RENO6PRO) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Zhifeng Liu /General Manager Company: Shenzhen kehuitong Technology Co.,Ltd Address: F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Phone: 860755-32902722 Fax: 860755-32902722 E-Mail: [email protected]

Shenzhen kehuitong Technology Co.,Ltd F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-4-1 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BE8S-RENO6PRO including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Zhifeng Liu /General Manager Company: Shenzhen kehuitong Technology Co.,Ltd Address: F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Phone: 860755-32902722 Fax: 860755-32902722 E-Mail: [email protected]

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 4 EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 4 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 4 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 4 Fig.7

Label Location: FCC ID: 2BE8S-RENO6PRO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 5 INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 WiFi/Bluetooth /FM/GNSS antenna WCDMA/GS M Main antenna Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 5 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 5 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 5 Fig.7 Fig.8 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 5 of 5 Fig.9

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPORT Report Reference No. ..................... : FCC ID ........................................... : CTA24030702201 2BE8S-RENO6PRO Compiled by ( position+printed name+signature) .. : File administrators Zoey Cao Supervised by ( position+printed name+signature) .. : Project Engineer Amy Wen Approved by ( position+printed name+signature) .. : RF Manager Eric Wang Date of issue ..................................... : Mar. 12, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................. : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Shenzhen kehuitong Technology Co Ltd Address ............................................. : F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Test specification ........................... : Standard ........................................... : IEC 62209-2:2010; IEEE 1528:2013; FCC 47 CFR Part 2.1093; ANSI/IEEE C95.1:2005; Reference FCC KDB 447498; KDB 248227; KDB 616217; KDB 941225; KDB 865664 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Mobile phone Trade Mark ....................................... : aderroo Manufacturer ..................................... : Shenzhen kehuitong Technology Co Ltd Model/Type reference ....................... : Reno6 pro Listed Models .................................. : Reno4pro，Reno5 pro Rating ............................................... : DC 3.7V From battery and DC 5V From external circuit Result ................................................ : PASS Report No.: CTA24030702201 Page 2 of 90 T E S T R E P O R T Equipment under Test : Mobile phone Model /Type : Reno6 pro Listed Models : Reno4pro，Reno5 pro Applicant : Shenzhen kehuitong Technology Co Ltd Address : F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Manufacturer : Shenzhen kehuitong Technology Co Ltd Address : F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24030702201 Page 3 of 90 Contents 1 Statement of Compliance ............................................................................................................................. 6 2 General Information ..................................................................................................................................... 7 2.1 General Remarks ............................................................................................................................................. 7 2.2 Description of Equipment Under Test (EUT) ..................................................................................................... 7 2.3 Device Category and SAR Limits ..................................................................................................................... 8 2.4 Applied Standard .............................................................................................................................................. 8 2.5 Test Facility ....................................................................................................................................................... 9 2.6 Environment of Test Site ................................................................................................................................... 9 2.7 Test Configuration ............................................................................................................................................. 9 3 Specific Absorption Rate (SAR) ................................................................................................................. 10 3.1 Introduction ..................................................................................................................................................... 10 3.2 SAR Definition ................................................................................................................................................ 10 4 SAR Measurement System ........................................................................................................................ 11 4.1 E-Field Probe ................................................................................................................................................... 11 4.2 Data Acquisition Electronics (DAE) ................................................................................................................. 12 4.3 Robot .............................................................................................................................................................. 13 4.4 Measurement Server ...................................................................................................................................... 13 4.5 Phantom .......................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: CTA24030702201 Page 68 of 90 Report No.: CTA24030702201 Page 69 of 90 Report No.: CTA24030702201 Page 70 of 90 Report No.: CTA24030702201 Page 71 of 90 Report No.: CTA24030702201 Page 72 of 90 Report No.: CTA24030702201 Page 73 of 90 Report No.: CTA24030702201 Page 74 of 90 Report No.: CTA24030702201 Page 75 of 90 Report No.: CTA24030702201 Page 76 of 90 Report No.: CTA24030702201 Page 77 of 90 Report No.: CTA24030702201 Page 78 of 90 Report No.: CTA24030702201 Page 79 of 90 Report No.: CTA24030702201 Page 80 of 90 Report No.: CTA24030702201 Page 81 of 90 Report No.: CTA24030702201 Page 82 of 90 Report No.: CTA24030702201 Page 83 of 90 Report No.: CTA24030702201 Page 84 of 90 Report No.: CTA24030702201 Page 85 of 90 Report No.: CTA24030702201 Page 86 of 90 Report No.: CTA24030702201 Page 87 of 90 Report No.: CTA24030702201 Page 88 of 90 Report No.: CTA24030702201 Page 89 of 90 Report No.: CTA24030702201 Page 90 of 90 *****END OF REPORT*****

Shenzhen SaiweiCommunication Technology Co., Ltd

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 1 of 19 Appendix Test Data for BLE (Conducted Measurement) Product Name: mobile phone Trade Mark: aderroo Test Model: Reno6 pro FCC ID: 2BE8S-RENO6PRO Environmental Conditions Temperature: 23.8°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Anna Hu Supervised by: Hugo Chen NOTE N/A Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.708 2401.652 2402.360 0.5 PASS BLE_1M Ant1 2440 0.704 2439.636 2440.340 0.5 PASS BLE_1M Ant1 2480 0.700 2479.644 2480.344 0.5 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 2 of 19 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 3 of 19 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0654 2401.4757 2402.5411 --- --- BLE_1M Ant1 2440 1.0653 2439.4782 2440.5435 --- --- BLE_1M Ant1 2480 1.0624 2479.4818 2480.5442 --- --- Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 4 of 19 Test Graphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 BLE_1M-Ant1-2480 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 5 of 19 Appendix C: Maximum peak conducted output power Test Result Peak TestMode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] EIRP[dBm] EIRP Limit[dBm] Verdict BLE_1M Ant1 2402 -1.52 ≤30 -1.52 ≤36 PASS BLE_1M Ant1 2440 -1.70 ≤30 -1.70 ≤36 PASS BLE_1M Ant1 2480 -1.96 ≤30 -1.96 ≤36 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 6 of 19 Test Graphs Peak BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 7 of 19 Appendix D: Maximum peak power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -17.26 ≤8.00 PASS BLE_1M Ant1 2440 -17.42 ≤8.00 PASS BLE_1M Ant1 2480 -17.66 ≤8.00 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 8 of 19 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS BLE_1M-Ant1-2480-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 9 of 19 Appendix E: Band edge measurements Test Result TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1M Ant1 Low 2402 -2.71 -50.76 ≤-22.71 PASS BLE_1M Ant1 High 2480 -2.93 -49.86 ≤-22.93 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 10 of 19 Test Graphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2480-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 11 of 19 Appendix F: Conducted Spurious Emission Test Result TestMod e Antenn a Frequency[M Hz] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1M Ant1 2402 Reference -3.91 -3.91 --- PASS BLE_1M Ant1 2402 30~1000 -3.91 -63.28 ≤-23.91 PASS BLE_1M Ant1 2402 1000~26500 -3.91 -50.61 ≤-23.91 PASS BLE_1M Ant1 2440 Reference -2.95 -2.95 --- PASS BLE_1M Ant1 2440 30~1000 -2.95 -62.97 ≤-22.95 PASS BLE_1M Ant1 2440 1000~26500 -2.95 -51.02 ≤-22.95 PASS BLE_1M Ant1 2480 Reference -3.31 -3.31 --- PASS BLE_1M Ant1 2480 30~1000 -3.31 -62.95 ≤-23.31 PASS BLE_1M Ant1 2480 1000~26500 -3.31 -50.75 ≤-23.31 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 12 of 19 Test Graphs BLE_1M-Ant1-2402-Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS BLE_1M-Ant1-2402-1000~26500-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 13 of 19 BLE_1M-Ant1-2440-Reference-PASS BLE_1M-Ant1-2440-30~1000-PASS BLE_1M-Ant1-2440-1000~26500-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 14 of 19 BLE_1M-Ant1-2480-Reference-PASS BLE_1M-Ant1-2480-30~1000-PASS BLE_1M-Ant1-2480-1000~26500-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 15 of 19 Appendix G: Duty Cycle Test Result TestMode Antenna Frequency[MHz] ON Time [ms] Period [ms] Duty Cycle [%] Duty Cycle Factor[dB] BLE_1M Ant1 2402 0.38 0.63 60.32 2.20 BLE_1M Ant1 2440 0.38 0.63 60.32 2.20 BLE_1M Ant1 2480 0.38 0.63 60.32 2.20 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 16 of 19 Test Graphs NTNV-BLE_1M-Ant1-2402 NTNV-BLE_1M-Ant1-2440 NTNV-BLE_1M-Ant1-2480 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-BLE Page 17 of 19 Appendix H: Emissions in Restricted Bands Test Result TestMode Antenna ChName Frequenc y[MHz] Detector Freq [MHz] Result [dBm] Limit [dBm] Result [dBuV/m] Limit [dBuV/m] Verdict BLE_1M Ant1 Low 2402 Peak 2390.000 -42.75 ≤-21.20 52.45 ≤74 PASS BLE_1M Ant1 Low 2402 Peak 2310.000 -42.7 ≤-21.20 52.50 ≤74 PASS BLE_1M Ant1 Low 2402 Peak 2387.780 -38.85 ≤-21.20 56.35 ≤74 PASS BLE_1M Ant1 Low 2402 AV 2390.000 -48.62 ≤-41.20 46.58 ≤54 PASS BLE_1M Ant1 Low 2402 AV 2310.000 -48.98 ≤-41.20 46.22 ≤54 PASS BLE_1M Ant1 Low 2402 AV 2379.695 -48.02 ≤-41.20 47.18 ≤54 PASS BLE_1M Ant1 High 2480 Peak 2483.500 -40.92 ≤-21.20 54.28 ≤74 PASS BLE_1M Ant1 High 2480 Peak 2500.000 -41.85 ≤-21.20 53.35 ≤74 PASS BLE_1M Ant1 High 2480 Peak 2495.200 -39.07 ≤-21.20 56.13 ≤74 PASS BLE_1M Ant1 High 2480 AV 2483.500 -47.89 ≤-41.20 47.31 ≤54 PASS BLE_1M Ant1 High 2480 AV 2500.000 -47.6 ≤-41.20 47.60 ≤54 PASS BLE_1M Ant1 High 2480 AV 2494.560 -47.51 ≤-41.20 47.69 ≤54 PASS Note： 1. The Antenna Gain is compensated in the graph. 2. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm f…

Text truncated - open the document above for the full version.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-WiFi2G4 Page 1 of 39 Appendix Test Data for WLAN(2.4G) (Conducted Measurement) Product Name: mobile phone Trade Mark: aderroo Test Model: Reno6 pro FCC ID: 2BE8S-RENO6PRO Environmental Conditions Temperature: 23.8°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Anna Hu Supervised by: Hugo Chen NOTE N/A Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 9.040 2407.520 2416.560 0.5 PASS 11B Ant1 2437 9.040 2432.520 2441.560 0.5 PASS 11B Ant1 2462 9.040 2457.480 2466.520 0.5 PASS 11G Ant1 2412 16.360 2403.840 2420.200 0.5 PASS 11G Ant1 2437 16.360 2428.840 2445.200 0.5 PASS 11G Ant1 2462 16.360 2453.840 2470.200 0.5 PASS 11N20SISO Ant1 2412 17.560 2403.240 2420.800 0.5 PASS 11N20SISO Ant1 2437 17.640 2428.200 2445.840 0.5 PASS 11N20SISO Ant1 2462 17.600 2453.200 2470.800 0.5 PASS 11N40SISO Ant1 2422 35.680 2404.240 2439.920 0.5 PASS 11N40SISO Ant1 2437 36.080 2419.080 2455.160 0.5 PASS 11N40SISO Ant1 2452 36.080 2434.080 2470.160 0.5 PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-WiFi2G4 Page 2 of 39 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2437-PASS 11B-Ant1-2462-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-WiFi2G4 Page 3 of 39 11G-Ant1-2412-PASS 11G-Ant1-2437-PASS 11G-Ant1-2462-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-WiFi2G4 Page 4 of 39 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2437-PASS 11N20SISO-Ant1-2462-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-WiFi2G4 Page 5 of 39 11N40SISO-Ant1-2422-PASS 11N40SISO-Ant1-2437-PASS 11N40SISO-Ant1-2452-PASS Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2BE8S-RENO6PRO Report No.: TZ240205405-WiFi2G4 Page 6 of 39 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 12.352 2405.8885 2418.2405 --- --- 11B Ant1 2437 12.385 2430.8583 2443.2433 --- --- 11B Ant1 2462 12.346 2455.8877 2468.2337 --- --- 11G Ant1 2412 17.137 2403.5377 2420.6747 --- --- 11G Ant1 2437 17.085 2428.4722 2445.5572 --- --- 11G Ant1 2462 17.027 2453.5309 2470.5579 --- --- 11N20SISO Ant1 2412 17.988 2403.0583 2421.0463 --- --- 11N20SISO Ant1 2437 18.008 2428.0148 2446.0228 --- --- 11N20SISO Ant1 2462 17.949 2453.0653 2471.0143 --- --- 11N40SISO Ant1 2422 36.298 2403.9449 2440.2429 --- --- 11N40SISO Ant1 2437 36.344 2418.9546 2455.2986 --- --- 11N40SISO Ant1 2452 36.305 2433.9514 2470.2564 --- --- Shenzhen Tongzhou Testing Co.,Ltd FCC…

Text truncated - open the document above for the full version.