2BE9W-BPSPW1-BSWITHNOX BASE STATION

       (Ref. KS S ISO 7010-M002) (Ref. KS P ISO 7000-3062) (Ref. KS P ISO 7000-2497) (Ref. KS P ISO 7000-2492) ( Transport and storage temperature range Ref. KS S ISO 7000-0632) ( Transport and storage humidity limits Ref. KS S ISO 7000-2620) ( Transport and storage pressure limits Ref. KS S ISO 7000-2621) (Ref. Ministry of Trade, Industry and Ene rgy Notice (제2022-0220호) General warning sign 5% RH 85% ∞C-10 45 500hPa 1060hPa ediuG ot slobmys dna noitacifitrec skram explanation explanation symbols symbols Separate disposal mark symbol (non- recyclable) (Ref. Article 4 of the Guidelines on Separate Disposal Marking) Must follow the instructions Manufacturer's mark date of manufacture Manufacturer's placement or lot number KC Mark: National Integrated Certification M ark Separate disposal mark symbol (non- recyclable) (Ref. Article 4 of the Guidelines on Separate Disposal Marking) Need to refer to the user manual (Ref. KS S ISO 7000-1641) 1. WITHNOX and components 2. Principles of action 3. Purpose of use 4. 4 .1 Protection from electric shock 5. Side Effect Information 6. Instructions for use 7. General information 8. Problem-sovl ing methods 9. Technical information 01 . onCsumer dispute resolution standards * Product Warranty eCrtificate Index Before using this product, Read the instructions carefully. Precautions for use ▪ Product Name: WITHNOX ▪ Model Name: WPSPB1 ▪WITHNOX set ▪Product Set (This product consists of the following.) ※ Before using the product, please check that there are no problems with the packaging and the appearance of the device, and that all components are included. WITHNOX electrode USB-C cable 1 1 21 1 1 1 1 1 1 Description of WITHNOX and its components device Components quantity base station WITHNOX device base station pouch storage pouch electrode storage plate adapter WITHNOX electrode power cable user manual charging adapter base station storage pouch instructions for use electrode storage pouch device charging and environment information measurement electrode storage plate Explanation 1. Description of WITHNOX and its components ▪ WITHNOX device The WITHNOX device has the following specifications. color : white size : 45.00 mm (W) * 44.00 mm(H) * 18.80 mm (D) font : On the front there are two buttons to control the power and output intensity. There is an LED display that shows the battery charging status and operating status. back : On the back there two connectors for charging and the WITHNOX electrode. The WITHNOX device's movement detection sensor measures the quality of sleep. ▪ WITHNOX electrode The WITHNOX electrode has the following specifications. size : 78.00 mm (W) * 32.86 mm(H) After attaching to the skin, it is connected to the WITHNOX device and stimulates the nerves through electric current. Due to the characteristics between the instrument and the electrode, only the WITHNOX electrode is designed to work with the instrument. The WITHNOX electrode has two connectors that are connected via magnets. Caution: WITHNOX devices are used with unique components that may pose exceptional risks. ▪WITHNOX device ▪WITHNOX electrode After being attached to the forehead, it is connected to the WITHNOX device and transmits electric current to stimulate the nerves. power ON/OFF battery and status LED Description of WITHNOX and its components It is a device that outputs current for percutaneous trigeminal nerve stimulation. Increased stimulus intensity Decreased stimulus intensity c harging connector device-electrode connection part device-electrode connection part  color : white size :129.00 mm (W) * 74.00 mm (H) * 38.00 mm (D) : Temperature and humidity measured from internal sensors are displayed on the status display. top : bottom : The button that operates the AP mode of the base station. back : ※ AP (Access Point) mode: Indirect lighting (mood lamp） adjust brightness (touch button） device charging port adjust the status display window (touch button） USB power connector AP mode button Description of WITHNOX and its components status display front The touch buttons can be used to adjust the information displayed on the status display and the brightness of the base station. The charging port can be opened to charge the WITHNOX device. There is a USB-C connector for power supply. The base station serves to charge the WITHNOX device while collecting sleep environment information and transmitting it to the server via Wi-Fi and BLE. The base station has the following specifications. (current time and battery charge status are also displayed.) It forms its own Wi-Fi network, enabling communication with other devices, and cad connect to the home Wi-Fi network to communicate with the server.  Principles of action Purpose of use During sleep, electrical pulse stimulation is transmitted through the skin to the trigeminal nerve in the forehead area to help improve sleep quality and concentration. This product uses the principle of trigeminal nerve stimulation to help improve sleep quality and concentration through 120Hz electric pulse stimulation. Electrodes are placed on the forehead to transmit electrical stimulation through the skin to the upper branch of the trig eminal nerve.  Cautions in use or precaution in use Prohibitions 1. Do not use WITHNOX for the following users. 2. Do not use in the following cases. - Subjects with metal or electronic devices implanted in the head - Subjects with unexplained pain - Subjects with pacemakers or implanted or wearable defibrillators - Body parts other than forehead - Do not use on neck. - Do not use on chest. - Do not use after brain surgery or head trauma  Cautions 1. If you suspect or know that you have a heart or health problem, consult your physician before using the WITHNOX device. 2. If you have recently suffered a head injury, do not use this device until you have fully recovered. 3. If you have any l…

Text truncated - open the document above for the full version.

Rev 1/26/2023 NUEYNE Co.,Ltd. Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si Korea Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-21-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BE9W-BPSPW1-BS [NUEYNE Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [NUEYNE Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Doo Hyun Kim / Q.A team manager NUEYNE Co.,Ltd. Rev 1/26/2023 NUEYNE Co.,Ltd. Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si Korea Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 21-08-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BE9W-BPSPW1-BS [NUEYNE Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Doo Hyun Kim / Q.A team manager NUEYNE Co.,Ltd.

Rev 1/26/2023 NUEYNE Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-21-2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2BE9W-BPSPW1-BS Applicant FRN: 0034944082 NUEYNE Co.,Ltd. “the applicant”) certifies that, as of the date of the filing of the application, [FCC US AGENT, LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [NUEYNE Co.,Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [FCC US AGENT, LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, NUEYNE Co.,Ltd. FCC US AGENT, LLC NUEYNE Co.,Ltd. Tim Payne [U.S. Agent signature]

NUEYNE Co.,Ltd. Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si, Korea Date: Aug. 21, 2025 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: New Family Listing Declaration Please review the attached exhibits supporting our request for applying New Family Listing to the FCC ID: 2BE9W-BPSPW1-BS for Company Name: NUEYNE co.,Ltd. Product Description: wellness equipment Base model: BPSPW1-BS Additional model(s): Refer to the Following table The only difference between the base model BPSPW1-BS and the additional model(s) are as follows: Model name Differences tested BPSPW1-BS Basic Model v BPSPM1-BS The hardware, software, etc. are the same, and the difference in name is solely due to marketing purposes. Sincerely Yours, Doo Hyun Kim / Q.A team manager

NUEYNE Co.,Ltd. Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si Korea Date: Aug. 21, 2025 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BE9W-BPSPW1-BS Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematic Block Diagram Operational Description and the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Doo Hyun Kim / Q.A. Team Manager

NUEYNE Co.,Ltd. Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si Korea To whom it may concern: I, the undersigned, hereby authorize Mr. Sung-Ryul Kim / Senior Researcher of Korea Testing Certification. and hereafter referred to as Korea Testing Certification to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Sung-Ryul Kim / Senior Researcher of Korea Testing Certification. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Korea Testing Certification as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by Date: Aug. 07, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Timco Engineering Inc. 13146NW 86th Drive Suite 400 Alachua,FL 32615 the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Doo Hyun Kim / Q.A MANAGER

FCC ID : 2BE9W-BPSPW1-BS Page 1 of 2 External photos FCC ID : 2BE9W-BPSPW1-BS Page 2 of 2 Blank

Name: WITHNOX Base Station Model: BPSPW1-BS S/N: BPSPW1-BSYYMMDD000 Manufacturing Date: YYYY.MM Manufacter: Nu Eyne Co., Ltd A/SContact: +82-02-6953-8420 FCC ID : 2BE9W-BPSPW1-BS

FCC ID : 2BE9W-BPSPW1-MD Page 1 of 3 Internal photos FCC ID : 2BE9W-BPSPW1-MD Page 2 of 3 FCC ID : 2BE9W-BPSPW1-MD Page 3 of 3 certifiedFCC ID : 2ATUB-WIZFI360PA

FCC ID : 2BE9W-BPSPW1-BS Page 1 of 1 RF exposure According to FCC part 1.1310 : The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in § 1.1307(b) Limits for Maximum Permissible Exposure (MPE) f= frequency in ㎒ Friis transmission formula: Pd = (Pout×G)/(4×pi×R 2 ) Where, Pd = power density in ㎽/㎠ Pout = output power to antenna in ㎽ G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd the limit of MPE, 1 ㎽/㎠. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Results Operation mode Frequency (㎒) Max Tune-up Average Power(㏈m) Antenna gain (㏈i) Power density at 20 ㎝(㎽/㎠) Limit (㎽/㎠) LE 1 Mbps 2 402 ~ 2 480 3.00 0.00 0.000 40 1 LE 2 Mbps 2.00 0.000 32 Frequency range (㎒) Electric field strength(V/m) Magnetic field strength (A/m) Power density (㎽/㎠) Average time (A) Limits for Occupational / Control Exposures 300 – 1 500 -- -- f/300 6 1 500 - 100000 -- -- 5 6 (B) Limits for General Population / Uncontrol Exposures 300 – 1 500 -- -- f/1500 6 1 500 – 100 000 -- -- 1 30

TEST REPORT Report No. : KES-RF250037-R1 Page1/46 KES Co., Ltd. #3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si,Gyeonggi-do, 14057, Republic ofKorea Tel : +82-31-425-6200, Fax : +82-31-341-3838 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). FCC TEST REPORT 1. Client ○ Name : NUEYNE Co.,Ltd. ○ Address : Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si, Korea 2. Sample Description ○ Product item : WITHNOX BASE STATION ○ Model name : BPSPW1-BS ○ Manufacturer etc. : NUEYNE Co.,Ltd. 3. Date of test :2025.01.16 ~ 2025.01.21 4. Location of Test :Permanent Testing LabOn Site Testing ○ Adress : 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea 5. Test method used :Part 15 Subpart C 15.247 6. Test result :PASS The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This laboratory is not accredited for the test results marked *. This test report is not related to KOLAS accreditation. Affirmation Tested byTechnical Manager Name : Myeong-Ho, Lee(Signature) Name :Yeong-Jun, Cho(Signature) 2025 . 09. 01. KES Co., Ltd. Accredited by KOLAS, Republic of KOREA Report No. :KES-RF250037-R1 Page2/46 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). REPORT REVISION HISTORY DateTest Report No.Revision History 2025.02.18KES-RF250037Initial 2025.09.01KES-RF250037-R1 Model name revised (page.1,4) Added FCC ID for module (page.4) NOTE revised (page.7) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. This document may be altered or revised by KES Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KES Co., Ltd. will constitute fraud and shall nullify the document. Use of uncertainty of measurement for decisions on conformity (decision rule): No decision rule is specified by the standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty(“simple acceptance” decision rule, previously known as “accuracy method”). ☐ Other (to be specified, for example when required by the standard or client) Report No. :KES-RF250037-R1 Page3/46 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). TABLE OF CONTENTS 1.General information ................................................................................................................................... 4 1.1.EUT description .......................................................................................................................... 4 1.2.Test configuration........................................................................................................................ 4 1.3.Information about derivative model ............................................................................................ 5 1.4.Accessory information ................................................................................................................ 5 1.5.Device modifications................................................................................................................... 5 1.6.Sample calculation ..................................................................................................................... 5 1.7.Measurement Uncertainty .......................................................................................................... 5 1.8.Frequency/channel operations ................................................................................................... 6 2.Summary of tests ....................................................................................................................................... 7 3.Test results .............................................................................................................................................. 8 3.1.6㏈bandwidth .......................................................................................................................... 8 3.2.Output power .............................................................................................................................11 3.3.Power spectral density ............................................................................................................. 13 3.4.Radiated restricted band and emissions .................................................................................. 16 3.5.Conducted spurious emissions & band edge ........................................................................... 38 3.6.AC conducted emissions .......................................................................................................... 43 3.7.Antenna Requirement............................................................................................................... 45 Appendix A. Measurement equipment.......................................................................................................... 46 Report No. :KES-RF250037-R1 Page4/46 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). 1.General information Applicant:NUEYNE Co.,Ltd. Applicant address:Unit 301, 27 Digital-ro-33-gil, Guro-gu, Seoul-si, Korea Test site:KES Co., Ltd. Test site address:#3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Republic of Korea 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea Test FacilityFCC Accreditation Designation No.: KR0100, Registration No.: 444148 FCC rule part(s):15.247 FCC ID:2BE9W-BPSPW1-BS Module FCC ID:2ATUB-WIZFI360PA Test devi…

Text truncated - open the document above for the full version.

2450 MHz Small SMD Chip AntennaP/N 2450AT42B100 Ground Clearance Requirements Minimized. This antenna was designed for corner or end-mounting Detail Specification: 10/08/13 Page 1 of 4 Inmm No. L ±± 1 W ±± 2 L1 ±± 3 W1 ±± 4 T a ±± Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved Note: It is recommended that the designer leave available slots for a "pi" (or shunt-series- shunt) network. The antenna matching network values here are used when antenna is mounted on Johanson's evaluation board. The matching values on clinet's PCB will be different, go to: johansontechnology.com/tuning and see how to obtain the new values. If you need further help, contact our RF Applications Eng Team at: www.johansontechnology.com/en/ask-a-technical-question.html We peform layout review as well as antenna tuning and characterization services. Go to page 2 for details. General Specifications -40 to +85°C 2W max. (CW) 2,000 50 Ω 9.5 dB min. -1.5 dBi typ. (XZ-V) 0 dBi typ. (XZ-V) 2400 - 2500 Mhz 0.0200.0120.500.30 0.0792.00+.004/-.008+0.1/-0.2 0.0080.20 0.50 0.0080.20 2.600.20 +5 ~ +35 °C,Humidity 45~75%RH -40 to +85°C "High Frequency Ceramic Solutions" 0.20 2.00 0.020 0.1020.008 0.008 0.197 0.079 5.00 NC NC NC 2450AT42B100 Mounting Considerations Part Number Frequency Range Peak Gain Average Gain Return Loss Impedance Reel Quanity Power Capacity Function Mechanical DimensionsTerminal Configuration Feeding Point Operating Temperature Recommended Storage Condition Storage Period a T W1 L1 W L     2.810.71 1 0.7 1.0 3 0.7 0.8 2 0.7 1 22 8 3.8 6 3.3 nH 1.5 nH Line width should be designed to match 50Ωcharacteristic impedance (Grounded Co‐Planar Waveguide), depending on PCB material and thickness. (The matching circuit and component values will be different on clients PCB layout, se notes below and go to page 2 for details). Top View Bottom View Side View Yellow area=Ground/Metal Clearance. The "0.82mm" dimmension is a min. requirement, if the designer can make this larger, the better radiation and gain will occur (i.e. 2.0 or 4.0mm) RF Via"stich" around antenna clearance and feed trace for best radiation 2450 MHz Small SMD Chip AntennaP/N 2450AT42B100 Detail Specification: 10/08/13 Page 2 of 4 Test Board: P/N: 2450AT42B100-EB1SMA (orderable item) To order, go to: www. johansontechnology.com/samplerequest Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved Typical Electrical Characteristics (T=25 o C) We offer antenna layout review, tuning, and characterization services, go to: www.johansontechnology.com/ipcantennaservices for details and instructions Johanson Evaluation Board (orderable item) "High Frequency Ceramic Solutions" 3.86 40 20 8 (Units in mm) Return Loss (with matching) This 50ΩFeedline can be as short as needed, this lenth is just for reference to our EVB 2450 MHz Small SMD Chip AntennaP/N 2450AT42B100 Detail Specification: 10/08/13 Page 3 of 4 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved Typical Electrical Characteristics (T=25 o C) Radiation Patterns "High Frequency Ceramic Solutions" XY-V/XY-H 180 o 270 o 0 o 90 o X Z Y XY-cut scanning directio n XZ-V/XZ-H 180 o 270 o 0 o 90 o X Z Y XZ-cut scanning directio n YZ-V/YZ- H 180 o 270 o 0 o 90 o X Z Y YZ-cut scanning directio n XY cut @2.45GHz Vertical Horizontal XZ cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal 2450 MHz Small SMD Chip AntennaP/N 2450AT42B100 Detail Specification: 10/08/13 Page 4 of 4 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved www.johansontechnology.com/technical-notes/rohs-compliance.html RoHS Compliance MSL Info www.johansontechnology.com/technical-notes/msl-rating.html www.johansontechnology.com/ipcantennaservices "High Frequency Ceramic Solutions" Part Number Explanation P/N Suffix Packing Style Bulk (loose pieces)Suffix = Seg.2450AT42B100S T & RSuffix = Eeg. 2450AT42B100E Temperature:+5C to +35°CShelf Life: 18 months max. T & R (Reverse)Suffix = Reg. 2450AT42B100R (MOQ Applies) 100% TinSuffix = None eg. 2450AT42B100(S, E, R) Eval Board (1-port SMA antenna test boards) 2450AT42B100-EB1SMA (Page 2) More Details www.johansontechnology.com/ipc-pn-explained Storage Conditions and Shelf Life (On T&R or Bulk) Relative Humidity: 45 to 75% Packaging information Soldering Information Antenna layout and tuning techniques www.johansontechnology.com/ipcsoldering-profile www.johansontechnology.com/ipcpackaging.html Antenna layout review, tuning, and characterization services www.johansontechnology.com/tuning

FCC ID : 2BE9W-BPSPW1-BS Page 1 of 1 Test setup photos Radiated test AC Conducted test Blank