2BEDD-RB01Desktop Bluetooth Extendable Tripod

SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD Add: Room 1322A01, Haiyuan Innovation Center, No. 8 Fu'an Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen,China Tel: 86-755-82598680 Fax: 86-75582598680 Email:[email protected] Date: 2024-01-26 To whom it may concern Dear Sir/Madam, We, SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD , hereby authorize China Certification ICT Co., Ltd (Dongguan) to act as a laboratory for testing and test report generation for the following project(s): (Product description: Desktop Bluetooth Extendable Tripod, Model: RB01 ) The product chip does not support 3EDR(8-DPSK), BT only supports BDR(GFSK), 2EDR(π/4-DQPSK) and BLE. Sincerely, Signature: Peter Yuen CTO

ATTESTATION STATEMENT FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii)Filling FCC ID: 2BEDD-RB01 SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Peter Yuen CTO SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD Add: Ro om 1322A01, Haiyuan Innovation Center, No. 8 Fu'an Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen,China Tel: 86-755-825986 80 Fax: 86-75582598680 Email:[email protected] Date: 2024-01-26

U.S. AGENT LETTER OF ATTESTATION Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2BEDD-RB01 SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD . certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD . accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD Add: Room 1322A01, Haiyuan Innovation Center, No. 8 Fu'an Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen ,China FRN: 0034693465 Tel: 86-755-82598680 Fax: 86-75582598680 Email:[email protected] Printed Name: Peter Yuen Signature:

SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD Add: Room 1322A01, Haiyuan Innovation Center, No. 8 Fu'an Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen,China Tel: 86-755-82598680 Fax: 86-75582598680 Email:[email protected] F CC Authorization Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization T o whom it may concern: We , SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD , Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Peter Yuen CTO QA-FR-170-B

SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD Add: Room 1322A01, Haiyuan Innovation Center, No. 8 Fu'an Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen ,China Tel: 86-755-82598680 Fax: 86-75582598680 Email:[email protected] FCC Conf idential Authorization Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Sub ject: Confidentiality Request regarding application for certification of FCC ID: 2BED D-RB01 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (SHENZHEN ELEMENT X TECHNOLOGY CO.,LTD ) hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sin cerely, Signature: Peter Yuen CTO QA-FR-171-A

China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-EXP Page 1 of 4 EUT EXTERNAL PHOTOGRAPHS EUT China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-EXP Page 2 of 4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-EXP Page 3 of 4 Micro USB Port China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-EXP Page 4 of 4

Charging 5V/100mA Device Name: AILIGHTP/N: Bluetooth RemoterModel: RB01FCCID:2BEDD-RB01 14 38 14 ∅ 9 14 38 14 ∅ 9

China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-INP Page 1 of 4 EUT INTERNAL PHOTOGRAPHS Uncover China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-INP Page 2 of 4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-INP Page 3 of 4 RF Chip Internal Battery China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-INP Page 4 of 4 Antenna

China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A Page 63 of 65 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 5.2 Measurement Result The max conducted power including tune-up tolerance is -6.0 dBm (0.25mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =0.25/5*(√2.480) = 0.1< 3.0 Result: Compliant. The stand-alone SAR evaluation is not necessary.

TEST REPORT Applicant: SHENZHEN ELEMENT X TECHNOLOGY CO.LTD Address: Room 1322A01, Haiyuan Innovation Center, No. 8 Fu'an Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen,China FCC ID: 2BEDD-RB01 Product Name: Desktop Bluetooth Extendable Tripod Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR240100818-00A Date Of Issue: 2024/3/8 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A Page 2 of 65 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accr edited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A Page 3 of 65 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1.GENERAL INFORMATION ................................................................................................. 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ................................................. 6 1.2 DESCRIPTION OF TEST CONFIGURATION ..................................................................................... 7 1.2.1 EUT Operation Condition .......................................................................................................................... 7 1.2.2 Support Equipment List and Details .......................................................................................................... 7 1.2.3 Support Cable List and Details .................................................................................................................. 7 1.2.4 Block Diagram of Test Setup ..................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .................................................................................................... 8 2.SUMMARY OF TEST RESULTS ......................................................................................... 9 3.REQUIREMENTS AND TEST PROCEDURES ............................................................... 10 3.1 AC LINE CONDUCTED EMISSIONS .............................................................................................. 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 EUT Setup.................................................................................................................................................... 11 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 11 3.1.4 Test Procedure ............................................................................................................................................. 12 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 12 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 13 3.2.1 Applicable Standard ..................................................................................................................................... 13 3.2.2 EUT Setup.................................................................................................................................................... 13 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 14 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.3 MINIMUM 6 DB BANDWIDTH ............................................................................................................. 16 3.3.1 Applicable Standard ..................................................................................................................................... 16 3.3.2 EUT Setup.................................................................................................................................................... 16 3.3.3 Test Procedure ................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A-TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A-TSP Radiated Emission 9kHz to 30MHz Parallel View Radiated Emission 9kHz to 30MHz Perpendicular View China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A-TSP Radiated Emission 9kHz to 30MHz Ground-parallel View Radiated Emission 30MHz to 1GHz View China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A-TSP Radiated Emission 30MHz to 1GHz View Radiated Emission Above 1GHz View China Certification ICT Co., Ltd (Dongguan) Report No.: CR240100818-00A-TSP Radiated Emission Above 1GHz View