2BEERYH13-002Wireless Remote

FLOOD LIGHT IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. c) This seasonal use product is not intended for permanent installation or use. d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f) Do not let lamps rest on the supply cord or on any wire. g) Unplug the product when leaving the house, when retiring for the night, or if left unattended. h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. i) Do not use this product for other than its intended use. j) Do not hang ornaments or other objects from cord, wire, or light string. k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation. l) Do not cover the product with cloth, paper or any material not part of the product when in use. m) This product is equipped with non-replaceable type lamps. Do not attempt to replace the lamps. n) Use only with the AC adaptor provided with this product. o) Read and follow all instructions that are on the product or provided with the product. p) SAVE THESE INSTRUCTIONS WARNING: Risk of Fire, shock, or personal injury. 1) Use only with the included AC power adaptor. 2) Not for use on outlets controlled by a dimmer. 3) Use only on timer controlled outlets where the timer is rated for use with compact fluorescent bulbs (CFL) or LED bulbs. 4) Do not use power adaptor if enclosure is broken or cracked, discard unit. 5) Do not use with a voltage converter. 6) The product and the AC power adaptor shall not be installed within 10 feet of a pool, spa, fountain, or other areas of standing water. Use and Care Instructions a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. b) When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or brushes, to avoid any undue strain or stress on the product conductors, connections and wires. c) When not used, store neatly in a cool, dry location protected from sunlight. d) Do not impact or drop the AC power adaptor, if enclosure is broken or cracked, discard product. Installation Instructions 1. Carefully remove product from packaging, be sure not to cut any wires. 2. Attach the light set connector to the adaptor by inserting the pins fully into the adaptor and screw on the holding ring. Hint – apply slight pressure to the holding ring towards adaptor while turning it. 3. Plug adaptor into wall outlet, lights should come on. For outdoor use, adaptor should be located in an outdoor outlet box where the adaptor connections can be protected from falling rain (see instructions on adaptor for further information) Projector Operation Use the push button on the remote control to select the timer mode or to change light color and functions. Projector Function List: Momentarily press button to change the color and function. 1. On 2. Off 3. Flash 4. Strobe 5. Fade 6. Smooth 7. Adjust speed (S-/S+) 8. Adjust brightness (+/-) 9. Light colors 10. Timer setting (2H/4H/6H) Timer Operation: Note – Product is shipped with the timer turned off. Enter Timer Mode - Press the timer button one time, the light flashes 3 times. There are 3 timer modes – 2H/4H/6H. Projector will turn on for approximately 2/4/6 hours and turn off for 22/20/18 hours and repeat daily as long as power is not turned off to the projector. Exit Timer Mode - Press the timer button one time, the light flashes 1 times. Light will remain on until power to projector is turned off. Functions Operation: Note – Each function button has a dual function. First Press – Enter the functions. Second Press – Exit the functions, and restore to a steady on color before enter the function. Troubleshooting Instructions If projector does not turn on: a) Make sure lights are connected to the AC power adaptor. Make sure connectors are fully inserted into the power adaptor, and are tight. b) Make sure the AC power adaptor is plugged into a 120V AC outlet. c) Make sure the outlet has power (check to see if any switches or timers control the outlet) and not connected to a dimmer switch. d) If used on a timer controlled outlet, make sure the timer is rated for use with compact fluorescent bulbs (CFL bulbs) or LED bulbs, if not, use on a different circuit/outlet. e) If plugged into a GFCI protected outlet, reset the GFCI in case it activated. f) Replace battery in remote control g) Contact customer service for additional information. If projector turns off on its own: a) Projector is in timer mode, see Projector Operation section to turn off timer. If projector turns on or off at the wrong time: a) Turn timer mode off and then turn the timer mode back on again at the desired time. Please see the Projector Operation section to turn timer off and back on. If moisture builds up on inside of lens: a) This is normal due to changes in temperature and humidity and will disappear in a few hours or few days depending on atmospheric conditions, operate unit as normal as the heat from operation and/or the sun will assist with the clearing of the moisture. Note: 1. Please insert 2 pieces of AAA Battery before use. (Battery not included) 2. If the remote control does not work, check whether the battery o…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: FCC US Agent, LLC FRN: 0033402884 Contact Name: Tim Payne Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Telephone No: 708-571-3148 Email: [email protected] Applicant: Company name: Quang Dong Vu Hao Electronics Co., Ltd Product Description: Wireless Remote Grantee code: 2BEER FCC ID: 2BEERYH13-002 FRN： 0034704460 Contact Name: Jiang Bin Address: Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Telephone No: 84-204-3786 888 Email: [email protected] [Quang Dong Vu Hao Electronics Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [FCC US Agent, LLC] is our designated US agent for service of process for the above referenced FCC ID. [ Quang Dong Vu Hao Electronics Co., Ltd ] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2024/01/27 Applicant’s Name: Jiang Bin US Agent’s Name: Tim Payne Title: Business manager Title: Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Quang Dong Vu Hao Electronics Co., Ltd Grantee code: 2BEER FRN： 0034704460 FCC ID: 2BEERYH13-002 Contact Name: Jiang Bin Address: Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Telephone No: 84-204-3786 888 Fax No: N/A Email: [email protected] i. [Quang Dong Vu Hao Electronics Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ Quang Dong Vu Hao Electronics Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [ Quang Dong Vu Hao Electronics Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 1/27/2024 Applicant’s Name: Jiang Bin Title: Business manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Quang Dong Vu Hao Electronics Co., Ltd Address: Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Product Name: Wireless Remote Model Number: 656379-102 FCC Identifier: 2BEERYH13-002 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jiang Bin Date: 27/01/2024 Title: Business manager Signature of applicant:

C5266091_X10_Ed.1 1/1 Quang Dong Vu Hao Electronics Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 27/01/2024 Subject: Request for Confidentiality FCC ID: 2BEERYH13-002 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jiang Bin Title: Business manager

FCC ID: 2BEERYH13-002 External photos FCC ID: 2BEERYH13-002 FCC ID: 2BEERYH13-002

Model No.656379-102 FCC ID2BEERYH13-002 Wireless Remote Label & Location

FCC ID: 2BEERYH13-002 Internal photos FCC ID: 2BEERYH13-002 RF Chip FCC ID: 2BEERYH13-002 RF Antenna RF Antenna

Report No.: NTC2401010F01 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 10 RF EVALUATION TEST REPORT Applicant.......................... : Quang Dong Vu Hao Electronics Co., Ltd Address........................... : Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Manufacturer..................... : Quang Dong Vu Hao Electronics Co., Ltd Address............................. : Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Factory............................ : Quang Dong Vu Hao Electronics Co., Ltd Address............................ : Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Product Name................... : Wireless Remote Brand Name..................... : N/A Model No. ....................... : 656379-102 FCC ID........................... : 2BEERYH13-002 Measurement Standard....... : 47 CFR PART 2, Section 2.1093 Receipt Date of Samples.... : January 02, 2024 Date of Tested.................. : January 02, 2024 to January 26, 2024 Date of Report.................. : February 03, 2024 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Rose Hu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2401010F01 Page 2 of 10 Table of Contents 1. General Description of EUT ................................................................................................................................ 4 2. Test Facility and Location ................................................................................................................................... 6 3. Applicable Standards and References ................................................................................................................ 7 4. Maximum Permissible Exposure Limit ................................................................................................................ 8 5. RF Exposure Evaluation Results ...................................................................................................................... 10 Report No.: NTC2401010F01 Page 3 of 10 Revision History Report Number Description Issued Date NTC2401010F01 Initial Issue 2024-02-03 Report No.: NTC2401010F01 Page 4 of 10 1. General Description of EUT Product Information Product Name: WIRELESS REMOTE Main Model Name: 656379-102 Additional Model Name: N/A Model Difference: N/A S/N: 2401-0011 Brand Name: N/A Hardware Version: Not stated Software Version: Not stated Rating: DC 3V come from 2* DC 1.5V AAA batteries Typical arrangement: Table-top I/O Port: Refer to the user manual Accessories Information Adapter: N/A Cable: N/A Other: N/A Additional Information Note: N/A Remark: All the information above are provided by the manufacturer. More detailed feature of the EUT please refers to the user manual. Report No.: NTC2401010F01 Page 5 of 10 Technical Specification Declaring the Frequency: 433.9155MHz±0.005MHz Modulation Type: ASK Antenna Type: PCB antenna Antenna Gain: 0 dBi (Declared by manufacturer) Number of Channels: 1 Report No.: NTC2401010F01 Page 6 of 10 2. Test Facility and Location Test Site : Dongguan Nore Testing Center Co., Ltd. (Dongguan NTC Co., Ltd.) Accreditations and Authorizations : The Laboratory has been assessed and proved to be in compliance with CNAS/CL01 Listed by CNAS, August 13, 2018 The Certificate Registration Number is L5795. The Certificate is valid until August 13, 2024 The Laboratory has been assessed and proved to be in compliance with ISO17025 Listed by A2LA, November 01, 2017 The Certificate Registration Number is 4429.01 Listed by FCC, November 06, 2017 Test Firm Registration Number: 907417 Listed by Industry Canada, June 08, 2017 The Certificate Registration Number. Is 46405-9743A Test Site Location : Building D, Gaosheng Science and Technology Park, Hongtu Road, Nancheng District, Dongguan City, Guangdong Province, China Report No.: NTC2401010F01 Page 7 of 10 3. Applicable Standards and References According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: Test Standards: 47 CFR Part 1, 1.1307 47 CFR Part 2, 2.1093 KDB 447498 D04 v01 Report No.: NTC2401010F01 Page 8 of 10 4. Maximum Permissible Exposure Limit According to 47 CFR Part 1, 1.1307, for single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: 47 CFR Part 1, 1.1307 (A) The available maximum time- averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time- averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by: Where, And, d = the minimum separation distance (cm) in any direction from any part of the device antenna(s) or radiating structure(s) to the body of the device user. For multiple RF sources: Multiple RF sources are exempt if: Report No.: NTC2401010F01 Page 9 of 10 (A) The available maximum time- averaged power of each source is no more than 1 mW and there is a…

Text truncated - open the document above for the full version.

ANTENNA SPECIFICATION Manufacture 厂家 ： Guangzhou Tengxincheng Electronic Co. , Ltd. Address 地址 ： No. 106, Fengzedong Road, Nansha New Area, Guangzhou Product type 产品类型 ： PCB Antenna model 填写型号 ： WIRELESS REMOTE Material 材料 ： FR-4 Gain ： 0dBi Frequency 频率 ： 433.9155MHz

Report No.: NTC2401010FV00 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 29 FCC RADIO TEST REPORT Applicant............................ : Quang Dong Vu Hao Electronics Co., Ltd Address............................. : Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Manufacturer....................... : Quang Dong Vu Hao Electronics Co., Ltd Address.............................. : Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Factory............................... : Quang Dong Vu Hao Electronics Co., Ltd Address............................. : Toan My Village, Voi Town, Lang Giang District, Bac Giang Province, Vietnam Product Name..................... : Wireless Remote Brand Name....................... : N/A Model No. .......................... : 656379-102 FCC ID............................... : 2BEERYH13-002 Measurement Standard.......... : 47 CFR FCC Part 15, Subpart C (Section 15.231) Receipt Date of Samples....... : January 02, 2024 Date of Tested..................... : January 02, 2024 to January 26, 2024 Date of Report..................... : February 03, 2024 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Rose Hu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2401010FV00 Page 2 of 29 Table of Contents 1. Summary of Test Result ...................................................................................................................................... 4 2. General Description of EUT ................................................................................................................................ 5 3. Test Channels and Modes Detail ........................................................................................................................ 7 4. Configuration of EUT ........................................................................................................................................... 7 5. Modification of EUT ............................................................................................................................................. 7 6. Description of Support Device ............................................................................................................................. 7 7. Test Facility and Location ................................................................................................................................... 8 8. Applicable Standards and References ................................................................................................................ 9 9. Deviations and Abnormalities from Standard Conditions ................................................................................... 9 10. Test Conditions ................................................................................................................................................. 9 11. Measurement Uncertainty ............................................................................................................................... 10 12. Sample Calculations ....................................................................................................................................... 11 13. Duty Cycle ....................................................................................................................................................... 12 14. Test Items and Results ................................................................................................................................... 13 14.1 Conducted Emissions Measurement ............................................................................................................ 13 14.2 Radiated Spurious Emissions Measurement ................................................................................................ 15 14.3 20dB Occupied Bandwidth ............................................................................................................................ 24 14.4 Transmission time ......................................................................................................................................... 26 14.5 Antenna Requirement ................................................................................................................................... 28 15. Test Equipment List......................................................................................................................................... 29 Report No.: NTC2401010FV00 Page 3 of 29 Revision History Report Number Description Issued Date NTC2401010FV00 Initial Issue 2024-02-03 Report No.: NTC2401010FV00 Page 4 of 29 1. Summary of Test Result FCC Rules Description of Test Result Remarks §15.207 (a) AC Power Line Conducted Emission N/A see note 2 --- §15.231(b) & 15.209 Radiated Spurious Emission PASS --- §15.231(c) 20 dB Occupied bandwidth PASS --- §15.231(a) Transmission time PASS --- §15.203 Antenna Requirement PASS --- Note: 1. The EUT has been tested as an independent unit. And continual transmitting in maximum power (New batteries were used during test) 2. AC Power Conducted Emission is not applicable due to the EUT only can be powered by battery. Report No.: NTC2401010FV00 Page 5 of 29 2. General Description of EUT Product Information Product Name: Wireless Remote Main Model Name: 656379-102 Additional Model Name: N/A Model Difference: N/A S/N: 2401-0011 Brand Name: N/A Hardware Version: Not stated Software Version: Not stated Rating: DC 3V com…

Text truncated - open the document above for the full version.

FCC ID: 2BEERYH13-002 Test Photo Radiated emission (Below 30MHz) Radiated emission (30-1000MHz) FCC ID: 2BEERYH13-002 Radiated emission (Above 1000MHz)