2BEF7-CHAR-11051POWER BANK

CLICKWIN LLC. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 13, 2024 FCC ID: 2BEF7-CHAR-11051 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing CLICKWIN LLC. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing CLICKWIN LLC. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: CLICKWIN LLC. Address: 530 S. Los Angeles St. Unit 2, Los Angeles, California 90013. United States Contact Person: Manuel Ignacio Tel.: 818 826 3955 Email: [email protected] Sincerely, Signature:

CLICKWIN LLC. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: March 13, 2024 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BEF7-CHAR-11051 CLICKWIN LLC. (“the applicant”) certifies that, as of the date of the filing of CLICKWIN LLC. (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLICKWIN LLC. ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLICKWIN LLC. FRN: 0034722710 Address: 530 S. Los Angeles St. Unit 2, Los Angeles, California 90013. United States Attn: Manuel Ignacio Signature: Contact Person: Manuel Ignacio Tel: 818 826 3955 Email: [email protected] Applicant Company Name: CLICKWIN LLC. FRN: 0034722710 Address: 530 S. Los Angeles St. Unit 2, Los Angeles, California 90013. United States Attn: Manuel Ignacio Signature: Contact Person: Manuel Ignacio Tel: 818 826 3955 Email: [email protected]

Name Product size A 20.5±0.5 B 39.0±1.0 C 43.5±0.5 D 34±2 E 40AX F 1.17±0.1 G 0.6±0.1 H 1.8±0.1 Φ 39.0*20.5 Wire Number of turns Diskette size L Coil size Test frequency 100KHz Unit：MM 0.08*48Thigh Way ofwinding Single wire folded 10 Ts Φ 43.5*Φ 5*0.6 6.5±10% Specification Wireless charge transmitting coil module Φ 43.5*Φ 5*H1.8 Test method Series test

CLICKWIN LLC. Date: March 29, 2024 Product Model Number: CHAR-11051 FCC ID: 2BEF7-CHAR-11051 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Manuel Ignacio Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 818 826 3955 On behalf of: CLICKWIN LLC.

CLICKWIN LLC. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 13, 2024 Subject; Request for Confidentiality FCC ID: 2BEF7-CHAR-11051 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Manuel Ignacio Title: Manager

Report No: SSP24010018-1E FCC ID: 2BEF7-CHAR-11051 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

- Page 1 of 11 - Report No.: HB20240307003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: POWER BANK Trade Mark: KB KBOD Model Number: CHAR-11051 FCC ID: 2BEF7-CHAR-11051 Prepared for CLICKWIN LLC. 530 S. Los Angeles St. Unit 2, Los Angeles, California 90013. United States Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20240307003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE .................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ............................................. 9 4.1.5. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................11 - Page 3 of 11 - Report No.: HB20240307003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : CLICKWIN LLC. Address ................................. : 530 S. Los Angeles St. Unit 2, Los Angeles, California 90013. United States Manufacturer's Name .......... : Dongguan Xiangzhiqing Electronics Co., Ltd. Address ................................. : Building 8, 319 Shipai section, Dongyuan Avenue, Shipai, Dongguan, Guangdong province Product description Product name ........................ : POWER BANK Model Number ....................... : CHAR-11051 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Mar. 07, 2024~Mar. 12, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20240307003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue De…

Text truncated - open the document above for the full version.

CCUT Testing & Certification Report No: SSP24010018-1E FCC Test Report Page 1 of 22 FCC TEST REPORT FCC ID: 2BEF7-CHAR-11051 Report No. : SSP24010018-1E Prepared For : CLICKWIN LLC. Product Name : POWER BANK Model Name : CHAR-11051 FCC Rule : FCC Part 15 Subpart C Date of Issue : 2024-03-13 Prepared By : Shenzhen CCUT Quality Technology Co., Ltd. Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24010018-1E FCC Test Report Page 2 of 22 Test Report Basic Information Applicant..................................: CLICKWIN LLC. Address of Applicant...............: 530 S. Los Angeles St. Unit 2, Los Angeles, California 90013. United States Manufacturer..........................: Dongguan Xiangzhiqing Electronics Co., Ltd. Address of Manufacturer........: Building 8, 319 Shipai section, Dongyuan Avenue, Shipai, Dongguan, Guangdong province Product Name.........................: POWER BANK Brand Name.............................: KB KBOD Main Model..............................: CHAR-11051 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.10-2013 Date of Test .............................: 2024-01-03 to 2024-01-12 Test Result...............................: PASSED Tested Engineer ....................: (Colin Chen) Project Manager......................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24010018-1E FCC Test Report Page 3 of 22 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 21 6.1 Standard and Limit.............................................................................................................................................. 21 6.2 Test Procedure.................................................................................................................................................... 21 6.3 Test Data and Results ..................................................................................................................…

Text truncated - open the document above for the full version.