2BEHY-CLICKNSOutdoor Phone

TM ClicknSeeYoo Video Door Phone with Baby Monitor Combo Set TM Hong Kong MCD Limited Unit ���, My Loft, No.� Hoi Wing Road, Tuen Mun, NT, Hong Kong Tel: +��� ���� ���� China MC Devices Co., Ltd The ��rd floor, Overseas Chinese Mansion II, Gaoxin Nanhuan Rd Nanshan, Shenzhen, China Tel: +�� ��� ���� ���� USA MC DEVICES (USA) LTD. ���� Buffalo Avenue, Suit �B#�, Niagara Falls, New York �����, United States Tel: +� ��� TIMEFLY(�������) INDOOR MONITOR OK LINK Outdoor Phone Indoor Monitor Indoor Baby Unit USB-C Power Cord * �Screw * � Tips: OUTDOOR PHONE Rechargeable Ba�ery *2 Adhesive Tape*� If you want to know what happened out of the door. *Long press activate Outdoor Phone Note: When indoor monitor is switched off, door phone does not work. Door Phone with Mounting Bracket x1 Microphone Camera Door Bell Quick press : Trigger “Ding Dong” sound and talk directly with housemaster Flashing when door bell rings Light Sensor Passive Infra-Red (PIR) Sensor OK VOX MODE LO ��:�� PU ��°C Power Button Long Press: Power On/Off Quick Press: Screen On/Off �-Level Sound Indicator Power Light Push to Talk * quick press "back to upper menu" Or Switch sound track (split mode)mode * long press "activate video door phone"t t MENU/OK ·Press to enter main menu. ·While selected menu, press to choose an item, or save a setting. Volume + Volume - Sound detection modes Add Camera up to � Cameras and door phone �X/�X Zoom No. of Cameras Auto alternation �-Cam Split mode Lullabies Brightness Display Clock Microphone Reset Light Sensor Temperature Sensor Threaded Socket for Mounting (Compatible with stand) Pair Button Power Indicator Type C Power Jack INDOOR BABY UNIT Re-pair OK! Repeat Step 4-5 HOW CLICKNSEEYOO VIDEO DOOR PHONE WORK? 1.A visitor presses ,after “Ding Dong”, and talks to housemaster via door phone. 2.Housemaster talks with visitor by pushing button on indoor unit Tips: If there is no action/sound detected for 10 seconds, sleeping mode of door phone would be on. All units are PAIRED BY DEFAULT. In case need to re-pair, follow steps below USB Type C Charging Port Rechargeable Battery Power Compartment Power Button Mounting Bracket (Front) Mounting Bracket (Back) Tapped Hole DOOR PHONE BACK VIEW OK LINK Step 3: Press Menu Step 5 Long press finger bu�on un�l “Di Di” Sound Step 4: Select “+” un�l "Di Di" sound, pair finished ON VOX MODE LO ��:�� PU ��°C OK LINK Step 1: Turn on all units OK LINK 1 sec TM Step 2: Press Pair Bu�on un�l “Di” sound Model ClicknSeeYoo FCC Statement ISED Statement Safety Instructions please read and follow the instructions below prior to using this product. �.This product is not a toy do not allow children to play with it. �.Strangulation Hazard: please keep the cords away from children for at least � feet/ � meter, in order to avoid strangling and choking �.Do not place the baby monitor inside or near the crib or playpen. Always place this product out of children's reach (at least � feet/� meter away). �.Avoid exposure to direct sunlight and any nearby heaters. �.Do not use or place the product near water, for example, next to the bathtub, sink, laundry machine, shower, swimming pool, or any other liquid-based containers. �.Use the adaptor provided in the package or the standard adaptor with correct polarity and voltage (Input: ���-���V ��/�� H��.�A; Output: �V ...����mA). �.Only use the charging cables included in the package, do not use other unofficial third-party cable to charge the unit. This might result in overheating and/or electronic component damage. �.Only use the included rechargeable battery for the baby monitor, do not replace it with other batteries. Do not disassemble, squeeze, heat or throw it into the fire. �. Do not overload the wall outlet or use an extension cord. ��. Do not place this product on any unstable surfaces or objects. ��. Aways unplug the baby monitor from the wall outlet and power source when used. ��. Do not insert any sharp or metal objects into the plug contacts. This might cause electric shock. ��. Unplug the product from the power supply before cleaning. Do not use any liquid aerosol cleaners. Use a dry cloth to clean only. �� Avoid spilling any liquid into this product. ��. This product is specifically designed for baby care and is not a replacement for adult supervision. ��. This product is not designed as a medical device. �� Aways test the baby monitor and check the reception status after changing its setup location. The signal of product may be affected by the wall thickness and other devices in the room using �.�Ghz frequency (e.g. router, WIFI, laptop, etc.) ��. If the baby monitor is not property functioning, please contact the customer service team as soon as possible in order to resolve the issues. This device complies with Part �� of the FCC Rules. Operation is subject to the following two conditions: (�)This device may not cause harmful interference. (�)This device must accept any interference received, including interference that may cause undesired operation. �. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part �� of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna…

Text truncated - open the document above for the full version.

MCD Limited 2024-11-25 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BEHY-CLICKNS) [MCD Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Tyler Yao engineers MCD Limited 631, MY LOFT, 9 Hoi Wing Rd, Tuen Mun, Hong Kong, 999077,China MCD Limited 2024-11-25 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2BEHY-CLICKNS) [MCD Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Tyler Yao Engineers MCD Limited 631, MY LOFT, 9 Hoi Wing Rd, Tuen Mun, Hong Kong, 999077,China

Attestation Statements (2024-03-27) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (GC: 2BEHY) (MCD LIMITED), the undersigned, hereby authorize (MC Devices(USA) LTD) to act as our designated U.S. agent for service of process, (MCD LIMITED) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (MC Devices(USA) LTD) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: MCD LIMITED Contact Name: Tyler Yao Address: 631, MY LOFT, 9 Hoi Wing Rd, Tuen Mun, Hong Kong, 999077,China FRN: 0034729186 Telephone No: 852-34886618 Email: [email protected] Signature [Tyler Yao] U.S. Agent Information: Company Name: MC Devices(USA) LTD Address: 2030 Main St., Suite 1300, Irvine,CA 92614 FRN: 0033706433 Contact Name: Selina Telephone No: 6479732688 Email: [email protected] Signature [Selina]

MCDLimited 2024-11-25 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeGuangdongGlobalTestingTechnologyCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, TylerYao engineers MCDLimited 631,MYLOFT,9HoiWingRd,TuenMun,HongKong,999077,China

MCDLimited 2024-11-25 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR(EUTName:OutdoorPhone/Model: ClicknSeeYoo/FCCID:2BEHY-CLICKNS) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(BlockDiagram,OperationalDescription,Schematics)required tobesubmittedwiththisapplicationbepermanentlywithheldfrompublicreview. Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoitscompetitors. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, TylerYao engineers MCDLimited 631,MYLOFT,9HoiWingRd,TuenMun,HongKong,999077,China

External Photographs View of EUT-1 View of EUT-2 Page 2 of 3 View of EUT-3 View of EUT-4 Page 3 of 3 View of EUT-5 View of EUT-6

Internal Photographs Internal View of EUT-1 Internal View of EUT-2 Page 2 of 7 Internal View of EUT-3 Internal View of EUT-4 Antenna Page 3 of 7 Internal View of EUT-5 Internal View of EUT-6 Page 4 of 7 Internal View of EUT-7 Internal View of EUT-8 Page 5 of 7 Internal View of EUT-9 Internal View of EUT-10 Page 6 of 7 Internal View of EUT-11 Internal View of EUT-12 Page 7 of 7 Internal View of EUT-13 Internal View of EUT-14

RF EXPOSURE EVALUATION EUT Specification EUT Outdoor Phone Model Number ClicknSeeYoo FCC ID 2BEHY-CLICKNS Antenna gain (Max) 0dBi Operation Frequency 2410-2473MHz Power Supply DC 5V / DC 30V / Battery 3.7V Classification Per Stipulated Test Standard §15.247(i), §2.1093 Modulation GFSK Max. output power 3.34dBm(0.0022W) Test Requirement: According to ß15.247(i) and ß1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Routine SAR evaluation refers to that specifically required by ß2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. One antenna is available for the EUT. The minimum separation distance is 5mm. According to KDB 447498, 2.4G can’t transmit simultaneously, and no simultaneous SAR measurement is required. Signature: Shawn Wen Date: 2024-11-7 Transmit Frequency (MHz) Mode Measured Power (dBm) Tune up Power (dBm) Max tune up power(dBm) Calculation Result 1-g SAR 2473 2.4G 3.34 3±1 4 0.79 3

TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 客户  ： 美芯集成电路 ( 深圳 ) 有限公司 品 名 规 格 DESCRIPTION ： Janus-1.13-L60MM-IPEX 一代 -2.4G 料号 PART NO. ： 客 户 料 号 CUS PART NO. ： 日期 D A T E ： 2024.10.30 云顶呈样签章 工 程 ENGINEERING DEPARTMENT 品保 Q C DEPARTMENT 业 务 SALES DEPARTMENT 客户承认签章 工 程 ENGINEERING DEPARTMENT 品保 Q C DEPARTMENT 采 购 PURCHASING DEPARTMENT 联系电话：0755 23073599 ж 承认书一式三份，惠蒙贵司承认签章 ж Approval in duplicate, please signed by your company. 承認書 APPROVALSHEET TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 1. 测试项目与设备 测试项目设备 1. S11 参数 （ S-parameter ） 1. 回波损耗 （ Return Loss ） 2. 电压驻波比（ VSWR ） 网络分析仪 : Agilent E5071B HP 8753D 2. 有源测试 （ Active ） 1. 发射功率 （ TRP ） 2. 接收灵敏度（ TIS ） 1. 暗室： ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2. 综合测试仪 : Agilent 8960 E5515B ×2 StarPoint SP6011 Cmw500 3. 无源测试 （ Passive ） 1. 天线增益 （ Gain ） 2. 天线效 率 （ Efficiency ） 1. 暗室： ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2. 网络分析仪： Agilent E5071B HP 8753D TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 2. 天线性能 SWR TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 3. 天线效率与增益 Passive Test For WIFI2.4 FreqEffiGain (MHz)(%)(dBi) 240030.77-1.02 241032.27-0.15 242033.05-0.23 243034.41-0.42 244036.3-0.18 245037.250.00 246035.5-0.73 247035.59-0.66 248035.01-0.3 249037.68-0.37 250037.33-0.37 TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 4. 天线结构图： TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 电器技术参数 电 性 能 指 标 Electrical Specifications 频率范围 2400~2500MHzFrequency Range2400~2500 MHz 电压驻波比≤ 2 VSWR ≤ 2 输入阻抗 50 ΩInput Impedance50 Ω 增益 0 DBIGain0 DBI 机 械 指 标 Mechanical Specifications 天线颜色黑色 Antenna ColorBlack 接口形式 IPEX 一代 Input connectorIPEX 1 天线线长 60mmCable length60mm 工作温度 -40 °C ~+85 °C Working Temperature -40 °C ~+85 °C 工作湿度 20~80%Working Humidity20~80% TEL ： +86 0755-23073599FAX ： +86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区航空路锦驰中心 3015 深圳市云顶通讯电子有限公司 SHENZHEN 环境性能测试（ Environment performance test ） : 项目测试条件测试结果 储存环境 在没有指定的情况下测试温度、湿度、气压如下： 1. 温度为-30°C～+80°C 2.相对湿度为45%-85% 3.气压为86kpa-106kpa 电气机械性能正常 高低温试验 在70°C与-40°C之间进行5次循环，然后在正常条件下 1-2H，检查外观质量。 尺寸应满足规定并应 满足 于机械、电气性能 耐恒定湿热 试验 相对湿度95±3%，试验温度：40°C.持续2H作用后， 试品取出后5min之内测定电气性能，试品在正常条 件下1-2H，检查外观质量 尺寸应满足规定并应 满足 于机械、电气性能 振动试验 振频范围10-55HZ，位移幅值：0.35MM，加速度幅值： 50.0M/S，扫频循环次数：30次 电气机械性能正常 跌落试验1M高空按照互相垂直的轴方向自由跌落3次电气机械性能正常 ProjectTest conditionTest results Storage environment Test temperature, humidity, pressure without stated condition as follwings:1.Temperature: -30 °C ～ +80 °C ;2.Relative humidity: 45%-85%;3,Pressure: 86kpa-106kpa Electrical and mechanical performance normal High and low temperature test Having 5 times cycle between -40°C to 70°C,Then in common condition 1-2 hours test exterior quality. Measurement satisfied with electrical and mechanical performance normal. Resistance constant hot and humid test Relative humidity:95 ±3%,Test temperature: 40°C,last 2 hours ,put it after 5 min test the electrical function .Test products during common condition 1-2 hours ,Then test exterior quality. Measurement satisfied with electrical and mechanical performance normal. Vibration test Vibrate Frequency:10-55HZ; Distance :0.35mm;Acceleration :50.0m/s;Sweep frequency cycle:30 times Electrical and mechanical performance normal Fall testFrom 1m height fall down 3 times freely (vertical direction) Electrical and mechanical performance normal

1 / 28 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Conducted Power Limit (dBm) E.I.R.P (dBm) E.I.R.P. Limit (dBm) Verdict NVNT 2.4G 2410 Ant1 2.83 21 2.83 36.02 Pass NVNT 2.4G 2441.5 Ant1 3.06 21 3.06 36.02 Pass NVNT 2.4G 2473 Ant1 3.34 21 3.34 36.02 Pass Note1: Antenna Gain: 0dBi; Note2: E.I.R.P = Conducted Power + Antenna Gain 2 / 28 Test Graphs Power NVNT 2.4G 2410MHz Ant1 Power NVNT 2.4G 2441.5MHz Ant1 3 / 28 Power NVNT 2.4G 2473MHz Ant1 4 / 28 -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 2.4G 2410 Ant1 4.41 N/A N/A NVNT 2.4G 2441.5 Ant1 4.34 N/A N/A NVNT 2.4G 2473 Ant1 4.23 N/A N/A 5 / 28 Test Graphs -20dB Bandwidth NVNT 2.4G 2410MHz Ant1 -20dB Bandwidth NVNT 2.4G 2441.5MHz Ant1 6 / 28 -20dB Bandwidth NVNT 2.4G 2473MHz Ant1 7 / 28 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT 2.4G 2410 Ant1 4.162 NVNT 2.4G 2441.5 Ant1 4.139 NVNT 2.4G 2473 Ant1 4.109 8 / 28 Test Graphs OBW NVNT 2.4G 2410MHz Ant1 OBW NVNT 2.4G 2441.5MHz Ant1 9 / 28 OBW NVNT 2.4G 2473MHz Ant1 10 / 28 Carrier Frequencies Separation Condition Mode Antenna Hopping Freq1 (MHz) Hopping Freq2 (MHz) HFS (MHz) Limit (MHz) Verdict NVNT 2.4G Ant1 2408.999 2412.485 3.486 2.94 Pass NVNT 2.4G Ant1 2440.485 2443.978 3.493 2.893 Pass NVNT 2.4G Ant1 2468.485 2471.985 3.5 2.82 Pass 11 / 28 Test Graphs CFS NVNT 2.4G 2410MHz Ant1 CFS NVNT 2.4G 2441.5MHz Ant1 12 / 28 CFS NVNT 2.4G 2473MHz Ant1 13 / 28 Number of Hopping Channel Condition Mode Antenna Hopping Number Limit Verdict NVNT 2.4G Ant1 19 15 Pass 14 / 28 Test Graphs Hopping No. NVNT 2.4G 2410MHz Ant1 15 / 28 Dwell Time Condition Mode Frequency (MHz) Antenna Pulse Time (ms) Total Dwell Time (ms) Burst Count Period Time (ms) Limit (ms) Verdict NVNT 2.4G 2410 Ant1 2.955 197.985 67 7600 400 Pass NVNT 2.4G 2441.5 Ant1 2.955 197.985 67 7600 400 Pass NVNT 2.4G 2473 Ant1 2.955 197.985 67 7600 400 Pass 16 / 28 Test Graphs Dwell NVNT 2.4G 2410MHz Ant1 One Burst Dwell NVNT 2.4G 2410MHz Ant1 Accumulated 17 / 28 Dwell NVNT 2.4G 2441.5MHz Ant1 One Burst Dwell NVNT 2.4G 2441.5MHz Ant1 Accumulated 18 / 28 Dwell NVNT 2.4G 2473MHz Ant1 One Burst Dwell NVNT 2.4G 2473MHz Ant1 Accumulated 19 / 28 Band Edge Condition Mode Frequency (MHz) Antenna Hopping Mode Max Value (dBc) Limit (dBc) Verdict NVNT 2.4G 2410 Ant1 No-Hopping -61.08 -20 Pass NVNT 2.4G 2473 Ant1 No-Hopping -59.97 -20 Pass 20 / 28 Test Graphs Band Edge NVNT 2.4G 2410MHz Ant1 No-Hopping Ref Band Edge NVNT 2.4G 2410MHz Ant1 No-Hopping Emission 21 / 28 Band Edge NVNT 2.4G 2473MHz Ant1 No-Hopping Ref Band Edge NVNT 2.4G 2473MHz Ant1 No-Hopping Emission 22 / 28 Band Edge(Hopping) Condition Mode Frequency (MHz) Antenna Hopping Mode Max Value (dBc) Limit (dBc) Verdict NVNT 2.4G 2410 Ant1 Hopping -60.35 -20 Pass NVNT 2.4G 2473 Ant1 Hopping -59.67 -20 Pass 23 / 28 Test Graphs Band Edge(Hopping) NVNT 2.4G 2410MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 2.4G 2410MHz Ant1 Hopping Emission 24 / 28 Band Edge(Hopping) NVNT 2.4G 2473MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 2.4G 2473MHz Ant1 Hopping Emission 25 / 28 Conducted RF Spurious Emission Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT 2.4G 2410 Ant1 -45.88 -20 Pass NVNT 2.4G 2441.5 Ant1 -45.73 -20 Pass NVNT 2.4G 2473 Ant1 -46.27 -20 Pass 26 / 28 Test Graphs Tx. Spurious NVNT 2.4G 2410MHz Ant1 Ref Tx. Spurious NVNT 2.4G 2410MHz Ant1 Emission 27 / 28 Tx. Spurious NVNT 2.4G 2441.5MHz Ant1 Ref Tx. Spurious NVNT 2.4G 2441.5MHz Ant1 Emission 28 / 28 Tx. Spurious NVNT 2.4G 2473MHz Ant1 Ref Tx. Spurious NVNT 2.4G 2473MHz Ant1 Emission

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C ISED RSS-247 ISSUE 3 (DSS) TEST REPORT For Outdoor Phone MODEL NUMBER: ClicknSeeYoo REPORT NUMBER: E04A24100096F00101 ISSUE DATE: November 5, 2024 FCC ID: 2BEHY-CLICKNS IC: 31445-CLICKNS Prepared for MCD Limited 631, MY LOFT, 9 Hoi Wing Rd, Tuen Mun, Hong Kong, 999077,China Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned Product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A24100096F00101 Page 2 of 48 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 November 5, 2024 Initial Issue REPORT NO.: E04A24100096F00101 Page 3 of 48 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) Pass AC Power Line Conducted Emission ANSI C63.10-2013 Clause 6.2 FCC Part 15.207 Pass Conducted Output Power ANSI C63.10-2013 Clause 7.8.5 FCC Part 15.247 (b)(1) Pass 20 dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2013 Clause 6.9.2 FCC Part 15.247 (a)(1) Pass Carrier Hopping Channel Separation ANSI C63.10-2013 Clause 7.8.2 FCC Part 15.247 (a)(1) Pass Number of Hopping Frequency ANSI C63.10-2013 Clause 7.8.3 FCC Part 15.247 (b)(1) Pass Time of Occupancy (Dwell Time) ANSI C63.10-2013 Clause 7.8.4 FCC Part 15.247 (a)(1) Pass Conducted Bandedge and Spurious Emission ANSI C63.10-2013 Clause 6.10.4 & Clause 7.8.8 FCC Part 15.247(d) Pass Radiated Band edge and Spurious Emission ANSI C63.10-2013 Clause 6.3 & 6.5 & 6.6 FCC Part 15.205/15.209 Pass *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C, ISED RSS-247 ISSUE 3 (DSS)> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A24100096F00101 Page 4 of 48 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. CHANNEL LIST ........................................................................................................ 8 5.3. Maximum Peak Output Power ................................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................ 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ............................................ 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ........................................................... 9 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................... 9 5.8. SETUP DIAGRAM .................................................................................................. 10 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 11 7. ANTENNA PORT TEST RESULTS ..................................................................................... 13 7.1. Conducted Output Power ........................................................................................ 13 7.2. 20 dB Bandwidth and 99% Occupied Bandwidth..................................................... 15 7.3. Carrier Hopping Channel Separation ...................................................................... 17 7.4. Number of Hopping Frequency ............................................................................... 19 7.5. Time of Occupancy (Dwell Time) ............................................................................ 21 7.6. Conducted Bandedge and Spurious Emission ........................................................ 23 8. RADIATED TEST RESULTS ............................................................................................... 25 8.1. Radiated Band edge and Spurious Emission .......................................................... 32 9. ANTENNA REQUIREMENT ................................................................................................ 44 10. AC POWER LINE CONDUCTED EMISSION ......................................................... 46 REPORT NO.: E04A24100096F00101 Page 5 of 48 TRF No.: 04-E001-0B Global Testing , Great Quality. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: MCD Limited Address: 631, MY LOFT, 9 Hoi Wing Rd, Tuen Mun, Hong Kong, 999077, China Manufacturer Information Company Name: MC DEVICES CO., LTD. Address: The 23rd floor, Overseas Chinese Mansion II, Kejinanhuan Rd, Nanshan, Shenzhen, China EUT Information Product Description: Outdoor Phone Model: ClicknSeeYo…

Text truncated - open the document above for the full version.

Photographs of test configuration AC Power Line Conducted Emission Radiated Band edge and Spurious Emission Page 2 of 2