2BENK-MEGG1Bluetooth Module

Shenzhen Root Innovation Technology Co., Ltd. U.S.Agent Designation for Service of Process (Applicant and U.S.Agent are Separate Parties) TO:Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S.Agent Company Name: ROOTTECHNOLOGYLTD. Address: 1624 Market St Ste 226 #30327 Denver, Colorado, 80202, UNITED STATES FRN: 0036719888 Tel.: (727) 358-6978 Email: [email protected] Signed by:Amy Dong This letter is to confirm that we (“the Designated U.S.Agent) have accepted the responsibility to act as the Designated U.S.Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicantnoted below. U.S.Agent Signature: Date: 2026/02/0 4 Signed by (Printed Name/Title):Amy Dong/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Root Innovation Technology Co., Ltd. Grantee Code: 2BENK FCC ID: 2BENK-MEGG1 FRN: 0034770701 Contact Name: Bobby Zou Address: Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili S ubdistrict, Nanshan District, Shenzhen,Guang, China Telephone No: +86-18571729087 Email: [email protected] Applicant Signature: Date: 2026/03/18 Signed by (Printed Name/Title): Bobby.zou / Manager

Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Dec. 24, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BENK-MEGG1 Shenzhen Root Innovation Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Bobby Zou Title: Manager Address: Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China Tel.: +86-18571729087 Email: [email protected]

Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Dec. 24, 2025 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BENK-MEGG1 Product Name: Bluetooth Module This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Bobby Zou Title: Manager Address: #2-201, Floor 2, Hasee Computer Building, No.2 Beier Rd, Bantian Street, Longgang, Shenzhen, Guangdong 518129, China Tel.: +86-18571729087 Email: [email protected] Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Dec. 24, 2025 Subject; Modular Transmitter Application Company name: Shenzhen Root Innovation Technology Co., Ltd. FCC ID: 2BENK-MEGG1 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v04r02; and FCC KDB 996369 D03 OEM Manual v01r01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID 2BENK-MEGG1 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Shielding is provided by a metal cover over the circuitry. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. All modulation and data inputs are buffered by circuitry on the transmitter chip. The module must contain power supply regulation on the module. Power supply regulation is provided by circuitry on the transmitter chip. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). It is PCB Antenna. The module must demonstrate compliance in a stand-alone configuration. Testing was performed in a stand-alone configuration as shown in the test setup photos. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The modular was labelled with its own FCC ID. The outside of device in to which the module is installed will labelled Contains TX FCC ID: 2BENK-MEGG1, Please refer to User Manual. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. The modular is comply with all applicable FCC rules. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China The module must comply with RF exposure requirements This module compliance with RF Exposure requirements, please refer to MPE Report. This module operates under Part 15.247 which is exempt from RF exposure evaluation owing to the very low operating power. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01r01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules P22 2.3 Summarize the specific operational use conditions P22 2.4 Limited module procedures P22 2.5 Trace antenna designs P22 2.6 RF exposure considerations P22 2.7 Antennas P22 2.8 Label and compliance information P22 2.9 Information on test modes and additional testing requirements P22 2.10 Additional testing, Part 15 Subpart B disclaimer P22 2.11 Note EMI Considerations P22 2.12 How to make changes P22 Name: Bobby Zou Date: Dec. 24, 2025 Title: Manager Signature of applicant

Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China Office of EngineeringTechnology FederalCommunicationsCommission 7435 OaklandMills Road Columbia,MD 21046 USA Date: Dec. 26, 2025 Subject;Requestfor Confidentiality FCC ID: 2BENK-MEGG1 To WhomIt May Concern, Pursuantto the provisionsof the Commission’s rules Title 47 Sections§0.457 and §0.459,we are requestingthe Commissionto withholdthe followingattachment(s)as confidential documentsfrom public disclosureindefinitely. Thesedocumentscontaindetailedsystemand equipmentdescriptionsand are consideredas proprietaryinformationin operationof the equipment.The public disclosureof these documents might be harmfulto our companyand would give competitorsan unfair advantagein the market. SchematicDiagram Block Diagram OperationalDescription In additionalto abovementioneddocuments,in order to complywith the marketingregulations in Title 47 CFR §2.803 and the importationrules in Title 47 CFR §2.1204,while ensuringthat businesssensitiveinformationremainsconfidentialuntil the actualmarketingof newly authorizeddevices,we requestShort Term Confidentialityof the followingattachment(s); ExternalPhotos Test Setup Photos InternalPhotos User Manual For 45 days, pursuantto PublicNoticeDA 04-1705. OR For 180 days pursuantto KDB 726920D01. It is our understandingthat all measurementtest reports,FCC ID label formatand correspondenceduringthe certificationreviewprocesscannotbe grantedas confidential documentsand this informationwill be availablefor public reviewonce the grant of equipment authorizationis issued. Sincerely, Signature: Name:BobbyZou Title: Manager

Shenzhen Root Innovation Technology Co., Ltd. Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China Dec. 24, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BENK-MEGG1 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with Shenzhen Root Innovation Technology Co., Ltd.. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Full name of contact person listed on FCC’s website: Bobby Zou Title: Manager Tel.: +86-18571729087 Email: [email protected]

FCC ID Label Location

Page 1 of 10 RF Exposure Report Report No.: AGC17273251101FH01 FCC ID : 2BENK-MEGG1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Module BRAND NAME : N/A MODEL NAME : RC6621AS APPLICANT : Shenzhen Root Innovation Technology Co., Ltd. DATE OF ISSUE : Dec. 24, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC17273251101FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 24, 2025 Valid Initial Release Report No.: AGC17273251101FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC17273251101FH01 Page 4 of 10 1. General Information Applicant Shenzhen Root Innovation Technology Co., Ltd. Address Room 3301, Aerospace Innovation Building, No. 7013 Liuxian Avenue, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen, Guang, China Manufacturer SHENZHEN RF CRAZY TECHNOLOGY CO., LTD. Address 4F, Building C2, Hengfeng Industrial Park, Zhoushi Road, Baoan District. Shenzhen, Guangdong, P.R.C 518101 Factory SHENZHEN RF CRAZY TECHNOLOGY CO., LTD. Address 4F, Building C2, Hengfeng Industrial Park, Zhoushi Road, Baoan District. Shenzhen, Guangdong, P.R.C 518101 Product Designation Bluetooth Module Brand Name N/A Test Model RC6621AS Series Model(s) N/A Difference Description N/A Date of receipt of test item Dec. 01, 2025 Date of Test Dec. 01, 2025 to Dec. 24, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By CiCi Li (Project Engineer) Dec. 24, 2025 Reviewed By Bibo Zhang (Reviewer) Dec. 24, 2025 Approved By Angela Li (Authorized Officer) Dec. 24, 2025 Report No.: AGC17273251101FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version 1.0 Software Version 5.0 Modulation Type BLE GFSK 1Mbps GFSK 2Mbps Maximum Transmitter Power -0.555dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 0.255dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC17273251101FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC17273251101FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.3V Note: The Extreme Temper…

Text truncated - open the document above for the full version.

Page 1 of 48 FCC Test Report Report No.: AGC17273251101FR01 FCC ID : 2BENK-MEGG1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Module BRAND NAME : N/A MODEL NAME : RC6621AS APPLICANT : Shenzhen Root Innovation Technology Co., Ltd. DATE OF ISSUE : Dec. 24, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC17273251101FR01 Page 2 of 48 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 24, 2025 Valid Initial Release Report No.: AGC17273251101FR01 Page 3 of 48 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Special Accessories .................................................................................................................................. 7 2.6 Equipment Modifications ........................................................................................................................... 7 2.7 Antenna Requirement................................................................................................................................ 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory ................................................................................................................. 8 3.2 Test Facility ................................................................................................................................................ 8 3.3 Environmental Conditions ......................................................................................................................... 9 3.4 Measurement Uncertainty ......................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................. 10 4. System Test Configuration ........................................................................................................................... 12 4.1 EUT Configuration ................................................................................................................................... 12 4.2 EUT Exercise ........................................................................................................................................... 12 4.3 Configuration of Tested System .............................................................................................................. 12 4.4 Equipment Used In Tested System ........................................................................................................ 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. Duty Cycle Measurement ............................................................................................................................. 16 7. RF Output Power Measurement .................................................................................................................. 17 7.1 Provisions Applicable .............................................................................................................................. 17 7.2 Measurement Procedure ......................................................................................................................... 17 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 7.4 Measurement Result ............................................................................................................................... 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 8.1 Provisions Applicable .............................................................................................................................. 20 8.2 Measurement Procedure ......................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 20 8.4 Measurement Results ............................................................................................................................. 21 9. Power Spectral Density Measurement ........................................................................................................ 25 9.1 Provisions Applicable .............................................................................................................................. 25…

Text truncated - open the document above for the full version.

Page 1 of 15 Antenna Test Report Report No.: AGC17273251101PA01 PRODUCT DESIGNATION : Bluetooth Module BRAND NAME : N/A MODEL NAME : RC6621AS APPLICANT : Shenzhen Root Innovation Technology Co., Ltd. DATE OF ISSUE : Dec. 24, 2025 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC17273251101PA01 Page 2 of 15 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 24, 2025 Valid Initial Release Report No.: AGC17273251101PA01 Page 3 of 15 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Technical Information ...................................................................................................................... 5 3. Test Summary List .......................................................................................................................................... 5 4. Test Environment ............................................................................................................................................ 6 4.1 Address of The Test Laboratory ................................................................................................................ 6 4.2 Test Facility ................................................................................................................................................ 6 4.3 Environmental Conditions ......................................................................................................................... 7 4.4 Measurement Uncertainty ......................................................................................................................... 7 4.5 List of Equipment Used ............................................................................................................................. 7 5. Antenna Passive Measurement Results ....................................................................................................... 8 5.1 Test Setup .................................................................................................................................................. 8 5.2 VSWR Test Result ..................................................................................................................................... 9 5.3 Gain and Efficiency Test Result .............................................................................................................. 10 5.4 Radiation Pattern Diagram ...................................................................................................................... 11 Appendix I: Photographs of Test Setup .......................................................................................................... 13 Appendix II: Photographs of Test EUT ........................................................................................................... 14 Report No.: AGC17273251101PA01 Page 4 of 15 1. General Information Applicant Shenzhen Root Innovation Technology Co., Ltd. Address #2-201, Floor 2, Hasee Computer Building,No.2 BeierRd, BantianStreet, Longgang Manufacturer SHENZHEN RF CRAZY TECHNOLOGY CO., LTD. Address 4F, Building C2, Hengfeng Industrial Park, Zhoushi Road, Baoan District. Shenzhen, Guangdong, P.R.C 518101 Factory SHENZHEN RF CRAZY TECHNOLOGY CO., LTD. Address 4F, Building C2, Hengfeng Industrial Park, Zhoushi Road, Baoan District. Shenzhen, Guangdong, P.R.C 518101 Product Designation Bluetooth Module Brand Name N/A Test Model RC6621AS Series Model(s) N/A Difference Description N/A Date of receipt of test item Dec. 01, 2025 Date of Test Dec. 01, 2025 to Dec. 24, 2025 Test Report Form No AGCER-OTA- Passive -V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By CiCi Li (Project Engineer) Dec. 24, 2025 Reviewed By Bibo Zhang (Reviewer) Dec. 24, 2025 Approved By Angela Li (Authorized Officer) Dec. 24, 2025 Report No.: AGC17273251101PA01 Page 5 of 15 2. Product Technical Information Frequency Range 2400MHz-2500MHz Test Frequency 2400MHz;2410MHz,2420MHz,2430MHz,2440MHz,2450MHz, 2460MHz,2470MHz,2480MHz,2490MHz, 2500MHz Antenna Type PCB Antenna Dimensions 10.5mm*3mm Impedance 50Ω Maximum test values Gain: 0.255dBi; Efficiency: 16.399%; VSWR: 1.106:1 3. Test Summary List NO. Test item Remark 1 VSWR -- 2 Gain and efficiency -- 3 Radiation pattern -- Report No.: AGC17273251101PA01 Page 6 of 15 4. Test Environment 4.1 Address of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F…

Text truncated - open the document above for the full version.