2BEW7-PB10PB10 Phone Holder

5.Daily use: 1 &lose tKe Kandle to loFN tKe pKone Uelease tKe Kandle to easily UePoYe tKe pKone. PB10 Mobile phone holder instruction manual 2024 edition A.This instruction is suitable for PB10 phone holders. B.More use problems and skills,please ask the local distributors. Tips: :Ken using it IoU tKe IiUst tiPe pull tKe pKone IoUFeIully ZKile adMust tKe NnoE s tigKtness until tKe pKone Fannot Ee pulled out and ensuUe tKat tKe pKone is FlaPped tigKtly. AIteU tKe IiUst opeUation iI tKe pKone is not UeplaFed siPply open oU loFN tKe Kandle to UePoYe oU plaFe tKe pKone. :Ken UeplaFing pKones oI diIIeUent si]es please Uepeat tKe aEoYe steps. Note: :Ken adMusting tKe pKone KoldeU ZidtK do not exFeed PP at tKe Zidest point do not loosen eaFK side Ey PoUe tKan 15PP otKeUZise tKe pKone KoldeU Pay disintegUate and EeFoPe unusaEle. 宽55-90mm 长<175mm 厚<１5mm . &onneFt tKe poZeU FoUd to tKe YeKiFle poZeU FontUolleU output teUPinal Model number：PB10B、PB10C AIteU Iixing tKe pKone KoldeU to tKe eleFtUiF YeKiFles PotoUFyFle oU otKeU YeKiFles supplied ZitK D& poZeU tuUn on tKe YeKiFle poZeU FontUolleU Fut tKe poZeU FoUd pUoYided ZitK tKe PoEile pKone pKone to a suitaEle lengtK and tKen FonneFt it to tKe poZeU output poUt oI tKe FontUolleU. Note: 1 &onIiUP tKat tKe YeKiFle output Yoltage is EetZeen D&129 2 TKe Ued ZiUe is FonneFted to tKe positiYe pole and tKe ElaFN ZiUe is FonneFted to tKe negatiYe pole. Do not UeYeUse tKe FonneFtion. Red wire connected to positive pole（+） Connect the black wire to the negative pole（－） 15PP 15PP 2 3Uess tKe poZeU Eutton onFe tKe gUeen poZeU indiFatoU ligKt FoPes on indiFating FKaUging pUess tKe poZeU Eutton again tKe poZeU indiFatoU ligKt goes out indiFating no FKaUging. Suggestion: :Ken paUNing oU not using tKe FKaUging IunFtion tuUn oII tKe poZeU gUeen poZeU indiFatoU ligKt oII to pUoteFt tKe YeKiFle EatteUy IUoP oYeUdisFKaUge. Power button Power indicator light (green) Fault indicator light (blue) )&& :A5N,N* TKis deYiFe FoPplies ZitK paUt 15 oI tKe )&& 5ules. 2peUation is suEMeFt to tKe IolloZing tZo Fonditions: 1 tKis deYiFe Pay not Fause KaUPIul inteUIeUenFe and 2 tKis deYiFe Pust aFFept any inteUIeUenFe UeFeiYed inFluding inteUIeUenFe tKat Pay Fause undesiUed opeUation. Any FKanges oU PodiIiFations not expUessly appUoYed Ey tKe paUty UesponsiEle IoU FoPplianFe Fould Yoid tKe useU s autKoUity to opeUate tKe eTuipPent. N2T(: TKis eTuipPent Kas Eeen tested and Iound to FoPply ZitK tKe liPits IoU a &lass % digital deYiFe puUsuant to 3aUt 15 oI tKe )&& 5ules. TKese liPits aUe designed to pUoYide UeasonaEle pUoteFtion against KaUPIul inteUIeUenFe in a Uesidential installation. TKis eTuipPent geneUates uses and Fan Uadiate Uadio IUeTuenFy eneUgy and iI not installed and used in aFFoUdanFe ZitK tKe instUuFtions Pay Fause KaUPIul inteUIeUenFe to Uadio FoPPuniFations. +oZeYeU tKeUe is no guaUantee tKat inteUIeUenFe Zill not oFFuU in a paUtiFulaU installation. ,I tKis eTuipPent does Fause KaUPIul inteUIeUenFe to Uadio oU teleYision UeFeption ZKiFK Fan Ee deteUPined Ey tuUning tKe eTuipPent oII and on tKe useU is enFouUaged to tUy to FoUUeFt tKe inteUIeUenFe Ey one oU PoUe oI tKe IolloZing PeasuUes:  5eoUient oU UeloFate tKe UeFeiYing antenna.  ,nFUease tKe sepaUation EetZeen tKe eTuipPent and UeFeiYeU.  &onneFt tKe eTuipPent into an outlet on a FiUFuit diIIeUent IUoP tKat to ZKiFK tKe UeFeiYeU is FonneFted.  &onsult tKe dealeU oU an expeUienFed UadioT9 teFKniFian IoU Kelp. To Paintain FoPplianFe ZitK )&&Ćs 5) (xposuUe guidelines TKis eTuipPent sKould Ee installed and opeUated ZitK PiniPuP 2FP distanFe EetZeen tKe UadiatoU and youU Eody: 8se only tKe supplied antenna. Expand Bracket Sun Visor Appendix 1: &oPponents /ist IoU (aFK 9eUsion Bracket-AD Bracket-ES Appendix 2: 0ain 3aUaPeteUs oI tKe &iUFuit ,nput Yoltage: D&129 :iUeless FKaUging poZeU: 15: Singleline output 8S% oU Type& : 92A 1: Dualline siPultaneous output: 592A 1: peU side total 2: :iUeless FKaUging FoPpatiEility: 4, 0agSaIe )2D deteFtion: (IIeFtiYe IilteUing oI 0agSaIe patFKes (IIeFtiYe opeUating tePpeUatuUe: 2e& to 5e& (IIeFtiYe opeUating KuPidity: 5 :ateUpUooI Uating: ,35 5eYeUse polaUity pUoteFtion sKoUt FiUFuit pUoteFtion: <es :aUP tips: 1 TKe input poZeU FoUd sKould not Ee diUeFtly FonneFted to tKe EatteUy and tKe polaUity sKould not Ee FonneFted inFoUUeFtly otKeUZise tKe EatteUy oU FiUFuit Pay Ee daPaged 2 :Ken not using tKe FKaUging IunFtion please tuUn oII tKe poZeU to pUolong tKe YeKiFle EatteUy liIe  :Ken tKe output data line is not FonneFted please FoYeU tKe ZateUpUooI FoYeU to pUoteFt tKe FiUFuit IUoP UainZateU and dust daPage.  No oEMeFts otKeU tKan tKe pKone sKould Ee plaFed on tKe suUIaFe oI tKe pKone EUaFNet espeFially Petal ZKiFK Pay Fause UisNs suFK as Keating and deYiFe daPage. Data Wire （1）Main body （2）Base parts （3）Optional parts PB10A Mechanical version without charging function PB10B Wired charging , capable of dual line simultaneous charging PB10C Wired+wireless charging,Can be charged simultaneously with three wires Patented products,quality assurance 1. Connect the phone holder mount with different brackets Universal joint seat Universal joint base The lock nut on universal joint Model number: PB10 This phone holder edition can be connected with different brackets, to be installed on different position for different vehicles. And it can make phones 360° adjustment.More details please read the 3th to the 4th page of the instruction manual. The lock nut on universal joint 2a. Install the phone holder on the handlebar of vehicles Model number: PB10A/B/C-AD Suitable vehicles: bicycles, motorcycles, electric vehicles Install position : handlebar（diameter range : 22-31.8mm） (1). Release the screw (2). Choose the right gasket according to the handlebar diameter (3). Install the bracket-AD on the handlebar and lock the screw (4). Adjust angle of the phone holder and lock the nut on the universal joint Bracket-AD 3 soft …

Text truncated - open the document above for the full version.

Attestation Statements (January 31, 2024) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2BEW7-PB10 ) (Shenzhen ODIER Sports Technology Co. Ltd.), the undersigned, hereby authorize (NEWENERGYER LIMITED) to act as our designated U.S. agent for service of process, (Shenzhen ODIER Sports Technology Co. Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (NEWENERGYER LIMITED) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: Shenzhen ODIER Sports Technology Co. Ltd. Contact Name: Rain TAN Address: 14/F-17, Kaihaoda Building, No. 1, Industrial Park Road, Shanghenglang Community, Dalang Street, Longhua District, Shenzhen, China Telephone No: 13538214502 Email: [email protected] FRN: 0034841403 Signature [Rain TAN] U.S. Agent Information: Company Name: NEWENERGYER LIMITED Address: 1818 S Patton Ct, Denver, CO, 80219 Contact Name: CHUN LIU Telephone No: 213 289 5042 Email: [email protected] FRN: 0034665885 Signature [CHUN LIU]

(Shenzhen ODIER Sports Technology Co. Ltd.) (January 31, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BEW7-PB10) [Shenzhen ODIER Sports Technology Co. Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Rain TAN (Shenzhen ODIER Sports Technology Co. Ltd.) (January 31, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BEW7-PB10) [Shenzhen ODIER Sports Technology Co. Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Rain TAN

Shenzhen ODIER Sports Technology Co. Ltd. Model Difference Data：January 31, 2024 Product description: PB10 Phone Holder Model name: PB10-Body, PB10 Trade Name: ODIER FCC ID: 2BEW7-PB10 All the model are the same circuit and RF module, except model names . Regards Sincerely Client’s signature : Client’s name / title : Rain TAN（General） Contact information / address：14/F-17, Kaihaoda Building, No. 1, Industrial Park Road, Shanghenglang Community, Dalang Street, Longhua District, Shenzhen, China

Shenzhen ODIER Sports Technology Co. Ltd. (January 31, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (PB10 Phone Holder / PB10-Body, PB10 / FCC ID: 2BEW7-PB10) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Rain TAN Title: General

Shenzhen ODIER Sports Technology Co. Ltd. (January 31, 2024) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Rain TAN Title: General

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 3 Model: PB10-Body External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 3 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 3

FCC ID LABEL: Label Location: FCC ID: 2BEW7-PB10 Model No.: PB10-Body

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 4 Model: PB10-Body Internal Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 4 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 4 ANT

RF EXPOSURE REPORT Compiled by: Reviewed by: Approved by: Arron Liu Bin Mei Rita Xiao / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: PB10 Phone Holder FCC ID: 2BEW7-PB10 Trademark: ODIER Model Number: PB10-Body, PB10 Prepared For: Shenzhen ODIER Sports Technology Co. Ltd. Address: 14/F-17, Kaihaoda Building, No. 1, Industrial Park Road, Shanghenglang Community, Dalang Street, Longhua District, Shenzhen, China Manufacturer: Dongguan Tianzhigong Mould Plastic Products Co., Ltd Address: No. 2, Junpeng Road, Qingyuling Industrial Zone, Shitanpu Community, Tangxia Town, Dongguan City, Guangdong Province, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Nov. 23, 2023 Sample tested Date: Nov. 23, 2023 to Dec. 04, 2023 Issue Date: Dec. 04, 2023 Report No.: CTB231201049RFX Test Standards FCC CFR 47 part1, 1.1307(b), 1.1310, 47 CFR§2.1091; KDB 680106 D01 Wireless Power Transfer v04 Test Results PASS Remark: This is wireless charger EMF report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231201049RFX EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page2 of 9 Table of Contents Page 1 . GENERAL INFORMATION 3 1.1 . Independent Operation Mode 3 1.2 . Test Supporting System 3 2 .LIST OF T EST AND M EASUREMENT I NSTRUMENTS 4 2.1 . For conducted emission at the mains terminals test 4 3. METHOD OF MEASUREMENT 5 3. 1.Applicable Standard 5 4. TEST RESULT 5 4.1. Conducted Emission at the Mains Terminals Test 5 4.2. Equipment Approval Considerations: 6 4.3. E and H field Strength 6 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231201049RFX EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page3 of 9 1. GENERAL INFORMATION 1.1. Independent Operation Mode The basic operation mode is: 1.1.1. wireless charger power: 15 W 1.2. Test Supporting System Adapter Description : Adapter Model No. : HP18A-0902000-AU Power Input : AC100-240V~ 1.0A 50/60Hz Output: 9V 2 .0A DC Line : Unshielded, Detachable 1.2m Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231201049RFX EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page4 of 9 2.LIST OF T EST AND MEASUREMENT I NSTRUMENTS 2.1. For conducted emission at the mains terminals test Item Equipment Brand Model No. Serial No. Last calibration Calibrated until 1 EMF TESTER Wavecontrol SMP160 19SN0989 2023.07. 09 2024.07. 08 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231201049RFX EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page5 of 9 3. METHOD OF MEASUREMENT 3. 1.Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. According KDB680106 D01: KDB 680106 D01 Wireless Power Transfer v04. 4. TEST RESULT 4.1. Conducted Emission at the Mains Terminals Test Note: Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device Test Procedure: a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (15cm) which is between the edge of the charger and the geometric centre of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points were completed. e) The EUT were measured according to the dictates of KDB 680106v04 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB231201049RFX EMF Report Te l : 4008-707-283 Web: http://www.ctb-lab.net Page6 of 9 4.2. Equipment Approval Considerations: The EUT does comply with item 5(b) of KDB 680106 V04 1) The power transfer frequency is below 1 MHz. Yes, the device operate in the frequency range from 110KHz to 205KHz 2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes, the maximum output power of the primary coil is 15000mW. 3) A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact). Ye s , the surfaces of the transmitter and client device enclosures are in physical contact 4) Only § 2.1091-Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions).. Yes, the EUT is a Mobile Wireless Charger 5) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. Yes, the EUT field strength levels are less 50% x MPE limit. 6) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. Yes, the EUT has only one coil，all test modes met the conditions specified in (5). 4.3. E and…

Text truncated - open the document above for the full version.

ANT PHTOT L W H 98mm±0.2 55mm±0.2 0.2mm±0.1 All measurements were performed radiated and therefore additional antenna gain documentation is not required.

TEST REPORT Compiled by: Reviewed by: Approved by: Arron Liu Bin Mei Rita Xiao / Director N ote: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: PB10 Phone Holder FCC ID: 2BEW7-PB10 Trademark: ODIER Model Number: PB10-Body, PB10 Prepared For: Shenzhen ODIER Sports Technology Co. Ltd. Address: 14/F-17, Kaihaoda Building, No. 1, Industrial Park Road, Shanghenglang Community, Dalang Street, Longhua District, Shenzhen, China Manufacturer: Dongguan Tianzhigong Mould Plastic Products Co., Ltd Address: No. 2, Junpeng Road, Qingyuling Industrial Zone, Shitanpu Community, Tangxia Town, Dongguan City, Guangdong Province, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Nov. 23, 2023 Sample tested Date: Nov. 23, 2023 to Dec. 04, 2023 Issue Date: Dec. 04, 2023 Report No.: CTB231201048RFX Test Standards FCC Part 15 C Test Results PASS Remark: This is wireless charger radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.:CTB231201048RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 19 TABLE OF CONTENTS 1. GENERAL INFORMATION ........................................................................................................................ 3 1.1. Report information ................................................................................................................................. 3 1.2. Measurement Uncertainty ..................................................................................................................... 3 1.3. Test Facility ........................................................................................................................................... 3 1.4. Test Uncertainty .................................................................................................................................... 4 2. PRODUCT DESCRIPTION ......................................................................................................................... 5 2.1. EUT Description .................................................................................................................................... 5 2.2. Block Diagram of EUT Configuration ..................................................................................................... 5 2.3. Test Conditions ..................................................................................................................................... 5 2.4. D escriptionOfSupport Units (Conducted Mode) .................................................................................... 6 3. TEST RESULTS SUMMARY ...................................................................................................................... 6 4. TEST EQUIPMENT USED .......................................................................................................................... 7 4.1. MEASUREMENT INSTRUMENTS LIST ............................................................................................... 7 5. CONDUCTED EMISSION TEST ................................................................................................................. 9 5.1. Block Diagram of Test Setup ................................................................................................................. 9 5.2. Test Standard ........................................................................................................................................ 9 5.3. Conducted Emission Limit ..................................................................................................................... 9 5.4. EUT Configuration on Test .................................................................................................................... 9 5.5. Operating Condition of EUT ................................................................................................................ 10 5.6. Test Procedure .................................................................................................................................... 10 5. 7. Test Result .......................................................................................................................................... 10 6. RADIATED EMISSION MEASUREMENT ................................................................................................ 11 6.1. Block Diagram of Test Setup ............................................................................................................... 11 6.2. Test Standard ...................................................................................................................................... 12 6.3. EMI Test Receiver Setup..................................................................................................................... 12 6.4. Test Procedure .................................................................................................................................... 12 6.5. Test Result .......................................................................................................................................... 12 7. OCCUPIED BANDWIDTH ........................................................................................................................ 16 7.1. B…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 3 Model: PB10-Body Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 3 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 3

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: PB10-Body Radiated Emission 9KHz-30MHz 30MHz-1GHz Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions